Electronics and metal finishing and processing

Water Environment Research

Volumn 71, Issue 5, 1999, Pages 816-822

  Lin, Wei ^b   Viadero Jr , Roger C ^c   Reed, Brian E ^c   Vaughan Jr , Ronald L ^a  

^a WEST VIRGINIA UNIVERSITY   (United States)

^b North Dakota State University   (United States)

^c NONE

Author keywords

[No Author keywords available]

Indexed keywords

CHEMICALS REMOVAL (WATER TREATMENT); CYANIDES; HYDROCHLORIC ACID; INDUSTRIAL WASTE TREATMENT; ION EXCHANGE; METAL CLEANING; METAL FINISHING; METAL WORKING; PRECIPITATION (CHEMICAL); SORPTION; WASTEWATER DISPOSAL;

METAL WORKING FLUIDS;

WASTEWATER TREATMENT;

ACID PRECIPITATION; ADSORPTION; EFFLUENT; ELECTRONICS; ENVIRONMENTAL IMPACT ASSESSMENT; ENVIRONMENTAL PROTECTION; INDUSTRIAL WASTE; ION EXCHANGE; METAL INDUSTRY; POLLUTION CONTROL; PRIORITY JOURNAL; REVIEW; WASTE MANAGEMENT;

EID: 0032821389     PISSN: 10614303     EISSN: None     Source Type: Journal    
DOI: 10.2175/106143099X133811     Document Type: Review

References (86)

1. Abdo, M.S.E., and Sedahmed, G.H. (1998) New Technique for Removing Hexavalent Chromium from Waste Water and Energy Generation via Galvanic Reduction with Scrap Iron. Energy Conver. Manage., 39, 943.
2. Ajmal, M.; Khan, A.H.; Ahmad, Sh.; and Ahmad, A. (1998) Role of Sawdust in the Removal of Copper(II) from Industrial Wastes. Water Res. (G.B.), 32, 3085.
3. Alguacil, F.J., and Cobo, A. (1998) Separation of Copper and Nickel from Ammoniacal/Ammonium Carbonate Solutions Using ACORGA PT5050. Sep. Sci. Technol., 33, 2257.
4. Almeida, E.; Diamantino, T.C.; Figueiredo, M.O.; and Sa, C. (1998) Oxidizing Alternative Species to Chromium VI in Zinc Galvanized Steel Surface Treatment. Part 1 - A Morphological and Chemical Study. Surf. Coat. Technol., 106, 1, 8.
5. Amer, S.I. (1998) Treating Metal Finishing Wastewater. Environ. Technol., 8, 2, 56.
6. Apak, R.; Tutem, E.; Hugul, M.; and Hizal, J. (1998) Heavy Metal Cation Retention by Unconventional Sorbents (Red Muds and Fly Ashes). Water Res. (G.B.), 32, 430.
7. Aronson, R.B. (1998) Part Cleaning Options. Manuf. Eng., 120, 2, 82.
8. Atkinson, B.W.; Bux, F.; and Kasan, H.C. (1998) Waste Activated Sludge Remediation of Metal Plating Effluents. Water SA (S. Afr.), 24, 4, 355.
9. Averill, A.; Ingram, J.; and Nolan, P. (1998) Cleaning Metal Components After the Montreal Protocol-Introductory Review. Trans. Inst. Met. Finish., 76, 3, 81.
10. Barclay, M.; Tettt, V.; and Knowles, C. (1998) Metabolism and Enzymology of Cyanide/Metallocyanide Biodegradation by Fusarium solani Under Neutral and Acidic Conditions. Enzyme Microb. Technol., 23, 5, 321.
11. Bartz, W. (1998) Lubricants and the Environment. Tribology Int., 31, 1-3, 35.
12. Basu, B.; Singh, M.; Kapur, G.; Ali, N.; Jain, S.; Srivastava, S.; and Bhatnagar, A. (1998) Prediction of Biodegradability of Mineral Base Oils from Chemical Composition Using Artificial Neural Networks. Tribology Int., 31, 4, 159.
13. Bergeson, L.L. (1998) EPA Withdraws Longstanding RCRA Reactivity Guidance. Pollut. Eng., 30, 7, 23.
14. Bishkin, B. (1998) PCB Wastewater Treatment. Printed Circuit Fabricat., 21, 11, 4.
15. Butter, T.J.; Evison, L.M.; Hancock, I.C.; Holland, F.S.; Matis, K.A.; Philipson, A.; Sheikh, A.I.; and Zouboulis, A.I. (1998) Removal and Recovery of Cadmium from Dilute Aqueous Solutions by Biosorption and Electrolysis at Laboratory Scale. Water Res. (G.B.), 32, 400.
16. Celio, H.; Mills, P.; Jentz, D.; Pae, Y.I.; and Trenary, M. (1998) Molecular Adsorption of HCN on Pt(111) and Cu(100). Langmuir (G.B.), 14, 1379.
17. Chettri, R. (1998) Risk Management Planning for Large Painting Facilities. Met. Finish., 96, 4, 46.
18. Datta, M. (1998) Microfabrication by Electrochemical Metal Removal. IBM J. Res. Develop., 42, 655.
19. Delgado, A.; Anselmo, A.M.; and Novais, J.M. (1998) Heavy Metal Biosorption by Dried Powdered Mycelium of Fusarium flocciferum. Water Environ. Res., 70, 3, 370.
20. Desai, J.; Ramakrishna, C.; Patel, P.; and Awasthi, S. (1998) Cyanide Wastewater Treatment and Commercial Applications. Chem. Eng. World, 33, 6, 115.
21. Duke, L.D., and Bauersachs, L.A. (1998) Compliance with Storm Water Pollution Prevention Regulations by the Metal Finishing Industry. J. Am. Water Resour. Assoc., 34, 1, 1.
22. Duyvesteyn, S. (1998) Some Recent Developments in Ion-Exchange Resins. JOM, 50, 10.
23. Espinola, A.; Adamian, R.; and Gomes, L.M.B. (1998) Coconut Shell in Removal of Cadmium Ions from Industrial Effluents. Proc. 1998 TMS Annu. Meet., San Antonio, Tex., 39.
24. Fouad, N.; Ismail, H.; and Zaki, M. (1998) Recovery of Red Iron Oxide Pigmentary Powders from Chemically-Modified Steel-Pickling Chemical Waste. J. Mater. Sci. Lett., 17, 1, 27.
25. Frias, C., and Perez, O. (1998) Acids and Metals Recovery from Spent Pickling Baths of Stainless Steels. Rev. Metal. (Sp.), 34, 427.
26. Gomes, M.; Teresa, S.; Silva, A.; Alexander, F.; Duarte, A.; and Oliveira, J. (1998) Determination of Cyanide in Waste Waters Using a Quartz Crystal Microbalance. Sens. Actuators, B, B48, 1-3, 383.
27. Goosey, M., and Kellner, R. (1998) Impact of Environmental Issues on the U.K. Printed Circuit Board Industry. Eng. Sci. Educ. J., 7, 5, 221.
28. Gopal, V.; April, G.C.; and Schrodt, V.N. (1998) Selective Removal of Copper from Multication Dilute Aqueous Solutions Using the Membrane-Electrode Process. Sep. Sci. Technol., 33, 723.
29. Gupta, G., and Torres, N. (1998) Use of Fly Ash in Reducing Toxicity of Heavy Metals in Wastewater Effluent. J. Haz. Mater., 57, 243.
30. Gupta, V.K.; Mohan, D.; and Sharma, S. (1998) Removal of Lead from Wastewater Using Bagasse Fly Ash - A Sugar Industry Waste Material. Sep. Sci. Technol., 33, 1331.
31. Henke, K.R. (1998) Chemistry of Heavy Metal Precipitates Resulting from Reactions with Thio-Red. Water Environ. Res., 10, 1178.
32. Jones, A., and Hull, J. (1998) Ultrasonic Flow Polishing. Ultrasonics, 36, 1-5, 97.
33. Junnier, R.W.; Dentel, S.K.; Ramana, A.; and Thuresson, D. (1998) Treatability Assessment of Chemical-Mechanical Polishing (CMP) Wastewater Generated by the Semiconductor Industry. Proc. 30th Mid-Atl. Ind. Waste Conf., Lancaster, Pa., 369.
34. Kapoor, A., and Viraraghavan, T. (1998a) Removal of Heavy Metals from Aqueous Solutions Using Immobilized Bungal Biomass in Continuous Mode. Water Res. (G.B.), 32, 1968.
35. Kapoor, A., and Viraraghavan, T. (1998b) Application of Immobilized Aspergillus niger Biomass in the Removal of Heavy Metals from an Industrial Wastewater. J. Environ. Sci. Health, 33, 1507.
36. Kapoor, A., and Viraraghavan, T. (1998c) Use of Immobilized Bentonite in Removal of Heavy Metals from Wastewater. J. Environ. Eng., 124, 1020.
37. Kratochvil, D.; Pimentel, P.; and Volesky, B. (1998) Removal of Trivalent and Hexavalent Chromium by Seaweed Biosorbent. Environ. Sci. Tech., 32, 2693.
38. Kumar, M.; Ghare, N.; Vaidya, A.; and Bal, A. (1998) Recovery of Acid from Pickling Liquors. Environ. Eng. Sci., 15, 4, 259.
39. Laintz, K.E.; Hale, C.D.; Stark, P.; Rouquette, C.L.; and Wilkinson, J. (1998) Comparison of Liquid and Supercritical Carbon Dioxide as an Extraction Solvent for Plating Bath Treatment. Anal. Chem., 70, 400.
40. Lancelot, S.F., and McMurray, H.N. (1998) Greener Alternative to Acid Pickling. Proc. 68th Annu. Conv. Wire Assoc., Cleveland, Ohio, 42.
41. Leao, V.; Ciminelli, V.; and de Souza Costa, R. (1998) Cyanide Recycling Using Strong-Base Ion-Exchange Resins. J. Metallurgy, 50, 10, 71.
42. Lee, J.; Deorkar, N.; and Tavlarides, L. (1998) Adsorption of Copper Cyanide on Chemically Active Adsorbents. Ind. Eng. Chem. Res. (G.B.), 37, 2812.
43. Lin, S.H., and Lo, M.C. (1998) Synthesis of Aluminum Ammonium Sulfate from Waste Aluminum Processing Solution by Crystallization. J. Haz. Mater., 63, 2-3, 211.
44. Lizotte, R.; Hogue, K.; and O'Shaughnessy, J. (1997) Cleaning Modifications Steps That Resulted in Pollution Prevention and Waste Minimization. Proc. 52nd Ind. Waste Conf., Purdue Univ., West Lafayette, Indiana, 587.
45. Lo, S.L., and Shiue, S.F. (1998) Recovery of Cr(VI) by Quaternary Ammonium Compounds. Water Res. (G.B.), 32, 1, 174.
46. Lopez, F.; Lopez-Delgado, A.; de Vidales, J.; and Vila, E. (1998) Synthesis of Nanocrystalline Zinc Ferrite Powders from Sulphuric Pickling Wastewater. J. Alloys Comp., 265, 1-2, 291.
47. Maeda, M., and Nakamura, T. (1998) Resources and Recycling Processes in Non-Ferrous Metals Industry in Japan. Light Met. Proc. 127th TMS Annu. Meet., Warrendale, Pa., 1207.
48. Mandich, N.V.; Lalvani, S.B.; Wiltkowski, T.; and Lalvani, L.S. (1998) Selective Removal of Chromate Anion by a New Carbon Adsorbent. Met. Finish., 96, 5, 4.
49. Margolis, N., and Sousa, L. (1998) Energy and Environmental Issues for Aluminum Production, Light Met. Proc. 127th TMS Annu. Meet., Warrendale, Pa., 1279.
50. Mason, S. (1998) Recycling Rinsewater Saves Money and Reduces Hazardous Wastes. Met. Finish., 96, 8, 2.
51. Namasivayam, C., and Ranganathan, K. (1998) Effect of Organic Ligands on the Removal of Pb(II), Ni(II) and Cd(II) by "Waste" Fe(III)/Cr(III) Hydroxide. Water Res. (G.B.), 32, 969.
52. Patino, F.; Salinas, E.; Cruells, M.; and Roca, A. (1998) Alkaline Decomposition-Cyanidation Kinetics of Argentian Natrojarosite. Hydrometallurgy, 49, 3, 323.
53. Pavlinic, S., and Piljac, I. (1998) Electrolytic Desorption of Silver from Ion-Exchange Resins. Water Res. (G.B.), 32, 2913.
54. Pazirandeh, M.; Wells, B.M.; and Ryan, R.L. (1998) Development of Bacterium-Based Heavy Metal Biosorbents: Enhanced Uptake of Cadmium and Mercury by Escherichia coli Expressing a Metal Binding Motif. Appl. Environ. Microbiol., 64, 4068.
55. Prueller, H. (1998) Water Recirculation in Vibratory Finishing. Galvanotechnik (Ger.), 89, 1844.
56. Rajagopalan, N.; Boddu, V.M.; Mishra, S.; and Kraybill, D. (1998) Pollution Prevention in an Aluminum Grinding Facility. Met. Finish., 96, 11, 5.
57. Reed, B.; Lin, W.; and Viadero, R. (1997) Oil-Based Lubricant/Coolant Treatment by High-Shear Rotary Ultrafiltration. Proc. 52nd Ind. Waste Conf., Purdue Univ., West Lafayette, Indiana, 429.
58. Rinkus, K.; Lin, W.; Jha, A.; and Reed, B. (1997) Investigation into the Nature and Extent of Microbial Contamination Present in a Commercial Metal-Working Fluid. Proc. 52nd Ind. Waste Conf., Purdue Univ., West Lafayette, Indiana, 601.
59. Rios, G.; Pazos, C.; and Coca, J. (1998) Destabilization of Cutting Oil Emulsions Using Inorganic Salts as Coagulants. Colloids Surf. A, 138, 2-3, 383.
60. Riveros, P.; Koren, D.; McNamara, V.; and Binvignat, J. (1998) Cyanide Recovery from a Gold Mill Barren Solution Containing High Levels of Copper. CIM Bull., 91, 1025, 73.
61. Saari, R.B.; Stansbury, J.S.; and Laquer, F.C. (1998) Effect of Sodium Xylenesulfonate on Zinc Removal from Wastewater. J. Environ. Eng., 124, 939.
62. Schwartz, S.I., and McBride, R.A. (1997) Pollution Prevention in the Metal Plating and Finishing Industry: Progress and Obstacles. Environ. Eng. Sci., 14, 4, 227.
63. Sekhar, K.C.; Subramanian, S.; Modak, J.M.; and Natarajan, K.A. (1998) Removal of Metal Ions Using an Industrial Biomass with Reference to Environmental Control. Int. J. Miner. Process., 53, 107.
64. Sengupta, S. (1998) Case Study: Investigation of Technologies for Removing Cr(VI) and Heavy Metal Cations from a Contaminated Site. Proc. 30th Mid-Atl. Ind. Waste Conf., Lancaster, Pa., 97.
65. Sharma, V.; Rivera, W.; Smith, J.; and O'Brien, B. (1998) Ferrate(VI) Oxidation of Aqueous Cyanide. Environ. Sci. Technol., 32, 2608.
66. Sheedy, M. (1998a) Recoflo Ion Exchange Technology. Proc. 1998 TMS Annu. Meet., San Antonio, Tex., 137.
67. Sheedy, M. (1998b) Case Studies in Applying Recoflo Ion-Exchange Technology. JOM, 50, 10, 66.
68. Sheng, P., and Hertwich, E. (1998) Indices for Comparative Waste Assessment in Environmentally-Conscious Manufacturing. Trans. ASME J. Manuf. Sci. Eng., 120, 1, 129.
69. Siddhaye, S., and Sheng, P. (1998) Evaluating Environmental Factors for Pre-Layout Board Design. Proc. 1998 IEEE Int. Symp. Electron. Environ., 99.
70. Simmer, W., and Simmer, R. (1998) Pickling and Regeneration Process for Stainless and Acid-Resistant Steels. Stahl Eisen (Ger.), 118, 2, 81.
71. Smith, B.F.; Robison, T.W.; Cournoyer, M.E.; Wilson, K.; Sauer, N.N.; and Lu, M.T. (1997) Polymer Filtration: A New Technology for Selective Metals Recovery. Proc. 52nd Ind. Waste Conf., Purdue Univ., West Lafayette, Indiana, 559.
72. Snukiskis, J.J.; Kauspediene, D.V.; and Gefeniene, A.J. (1998) Preventing Environmental Contamination by Nonionic Surfactants and Nickel. Trans. Inst. Met. Finish., 76, 6, 217.
73. Stone, N. (1998) How the New HCl Regulations Will Affect Rod and Wire Pickling Operations. Proc. 68th Annu. Conv. Wire Assoc., Cleveland, Ohio, 48.
74. Sun, G., and Shi, W. (1998) Sunflower Stalks as Adsorbents for the Removal of Metal Ions from Wastewater. Ind. Eng. Chem. Res. (G.B.), 37, 1324.
75. Sunthankar, M.B., and Joshi, S.D. (1998) Novel Zero-Waste PVD Cadmium as an Alternative to Electroplated Cadmium. Trans. Inst. Met. Finish., 76, 5, B71.
76. Szafnicki, K.; Bourgois, J.; Graillot, D.; Di Benedetto, D.; Breuil, P.; and Poyet, J.P. (1998) Real-Time Supervision of Industrial Waste-Water Treatment Plants Applied to the Surface Treatment Industries. Water Res. (G.B.), 32, 2480.
77. Szmejkal, A.; Somfai, K.; and Kisdeak, L. (1998) Possibilities of Developments of Cooling/Lubricating Fluids in Metal Working. Proc. Conf. Mech. Eng., 1st Conf., GEPESZET'9, 1, 1, 259.
78. U.S. Environmental Protection Agency (1997) Pollution Prevention for the Metal Finishing Industry: Manual for Pollution Technical Assistance Providers. EPA-742/B-97-005, Washington, D.C.
79. U.S. Environmental Protection Agency (1998a) Alternative Technologies for Making Holes Conductive: Cleaner Technologies for Printed Wiring Board Manufacturers. EPA-744/R-98-002, Washington, D.C.
80. U.S. Environmental Protection Agency (1998b) Pollution Prevention and Control Technologies: Analysis of Updated Survey Results. EPA-744/ R-98-003, Washington, D.C.
81. U.S. Environmental Protection Agency (1998c) Printed Wiring Board Cleaner Technologies Substitutes Assessment: Making Holes Conductive. EPA-744/R-98-004, Washington, D.C.
82. Vaskelis, A., and Salkauskas, M. (1998) Environmentally Friendly Chemical Technologies. Crit. Rev. Anal. Chem., 28, 2, 157.
83. Weng, D.; Wang, R.; and Zhang, G. (1998) Environmental Impact of Zinc Phosphating in Surface Treatment of Metals. Met. Finish., 96, 9, 3.
84. Wikoff, P.M., and Prescott, D.S. (1998) Chromium Reduction, Heavy Metal Precipitation with the Neutral Process. Environ. Tech., 8, 5, 4.
85. Williams, C.J.; Aderhold, D.; and Edyvean, R.G.J. (1998) Comparison Between Biosorbents for the Removal of Metal Ions from Aqueous Solutions. Water Res. (G.B.), 32, 1, 216.
86. Young, C. (1998) Mechanism for the Photocatalytic Destruction of Cyanide Species. Proc. 1998 TMS Annu. Meet., Warrendale, Pa., 877.