The behavior of a compressible silty fine sand

Canadian Geotechnical Journal

Volumn 36, Issue 1, 1999, Pages 88-101

  Huang, An Bin ^a   Hsu, Huai Houh ^a   Chang, Jia Wei ^a   Huang, A B ^a   Hsu, H H ^a   Chang, J W ^a  

^a NATIONAL CHIAO TUNG UNIVERSITY   (Taiwan)

Author keywords

Compressibility; Crushing; Dilatancy; In situ test; Silty fine sand; Strength

Indexed keywords

COMPRESSIVE STRENGTH; CRUSHING; DATABASE SYSTEMS; FRICTION; LOADS (FORCES); MECHANICAL PROPERTIES; MECHANICAL TESTING; PARTICLES (PARTICULATE MATTER); QUARTZ;

CONE PENETRATION TEST; DILATANCY; IN SITU TEST; MAI-LIAO SAND; SILTY FINE SAND; TRIAXIAL SHEARING;

SAND;

COMPRESSIBILITY; CONE PENETRATION TEST; DILATANCY; FINES; SAND; SILTY SOIL;

TAIWAN;

EID: 0032718544     PISSN: 00083674     EISSN: None     Source Type: Journal    
DOI: 10.1139/t98-090     Document Type: Article

References (31)

1. Baldi, G., Belloti, R., Ghiona, V., Jamiolkowski, M., and Pasqualini, E. 1986. Interpretation of CPTs and CPTUs. Part 2. Drained penetration of sands. In Proceedings of the Fourth International Geotechnical Seminar on Field Instrumentation and in situ Measurements, Nanyang Technological Institute, Singapore, pp. 129-156.
2. Been, K., and Jefferies, M.G. 1985. A state parameter for sands. Géotechnique, 35(2): 99-112.
3. Been, K., Jefferies, M.G., and Hachey, J. 1991. The critical state of sands. Géotechnique, 41(3): 365-381.
4. Bellotti, R., and Pedroni, S. 1991. Design and development of a small calibration chamber for compressible sands. In Proceedings of the First International Symposium on Calibration Chamber Testing, Potsdam, N.Y. Edited by A.-B. Huang. Elsevier, New York, pp. 91-100.
5. Bishop, A.W., and Green, G.E. 1965. The influence of end restraint on the compression strength of a cohesionless soil. Géotechnique, 15(3): 243-266.
6. Black, D.K., and Lee, K.L. 1973. Saturating laboratory samples by back pressure. Journal of the Soil Mechanics and Foundation Engineering Division, ASCE, 99(1): 75-93.
7. Bolton, M.D. 1986. Strength and dilatancy of sands. Géotechnique, 36(1): 65-78.
8. El-Sohby, M. A., and Andrawes, K.Z. 1972. Deformation characteristics of granular materials under hydrostatic compression. Canadian Geotechnical Journal, 9(3): 338-350.
9. Fioravante, V., Jamiolkowski, M., Tanizawa, F., and Tatsuoka, F. 1991. Result of CPTs in Toyoura quartz sand. In Proceedings of the First International Symposium on Calibration Chamber Testing, Potsdam, N.Y. Edited by A.-B. Huang. Elsevier, New York, pp. 135-146.
10. Hardin, B.O. 1985. Crushing of soil particles. Journal of the Geotechnical Engineering Division, ASCE, 111(10): 1177-1192.
11. Houlsby, G.T., and Hitchman, R. 1988. Calibration chamber tests of a cone penetrometer in sands. Géotechnique, 38(1): 39-44.
12. Huang, A.B., and Ma, M.Y. 1994. An analytical study of cone penetration tests in granular material. Canadian Geotechnical Journal, 31(1): 91-103.
13. Huang, A.B., Bunting, R.D., and Carney, T.C. 1991. Piezoblade tests in a clay chamber. In Proceedings of the First International Symposium on Calibration Chamber Testing, Potsdam, N.Y. Edited by A.-B. Huang. Elsevier, New York, pp. 161-174.
14. Ishihara, K. 1993. Liquefaction and flow failure during earthquakes. The 33rd Rankine Lecture. Géotechnique, 43(3): 351415.
15. Joustra, K., and de Gijt, J.F. 1982. Results and interpretation of cone penetration tests in soils of different mineralogical composition. In Proceedings of the Second European Symposium on Penetration Testing, Amsterdam, The Netherlands, Vol. 2, pp. 615-626.
16. Koemer, R.M. 1970. Effect of particle characteristics on soil strength. Journal of the Soil Mechanics and Foundation Engineering Division, ASCE, 96(4): 1221-1234.
17. Koerner, R.M. 1970ft. Behavior of single mineral soils in triaxial shear. Journal of the Soil Mechanics and Foundation Engineering Division, ASCE, 96(4): 1373-1390.
18. Konrad, J.M. 1998. Sand state from cone penetrometer tests: a framework considering grain crushing stress. Géotechnique, 48(2): 201-215.
19. Kulhawy, F.H., and Mayne, P.W. 1991. Relative density, SPT, and CPT interrelationships. In Proceedings of the First International Symposium on Calibration Chamber Testing, Potsdam, N.Y. Edited by A.-B. Huang. Elsevier, New York, pp. 197-211.
20. Lade, P.V., Yamamuro, J.A., and Bopp, P.A. 1996. Significance of particle crushing in granular materials. Journal of the Geotechnical Engineering Division, ASCE, 122(4): 309-316.
21. Lee, K.L., and Farhoomand, I. 1967. Compressibility and crushing of granular soils in anisotropic triaxial compression. Canadian Geotechnical Journal, 4(1): 68-86.
22. McNeilan, T.W., and Bugno, W.T. 1984. Cone penetration test results in offshore California silts.. In Proceedings of the Symposium on Strength Testing of Marine Sediments: Laboratory and in-situ Measurements, San Diego, Calif. ASTM STP 883, pp. 55-71.
23. Mesri, G., Feng, T.W., and Benak, J.M. 1990. Postdensification penetration resistance of clean sands. Journal of the Geotechnical Engineering Division, ASCE, 116(7): 1095-1115.
24. Parkin, A.K. 1988. The calibration of cone penetrometers. In Proceedings of the First International Symposium on Penetration Testing, ISOPT-1, Orlando, Fla. Edited by De Ruiter. Balkema, Rotterdam, The Netherlands, pp. 221-243.
25. Rix, G.J., and Stokoe, K.H. 1991. Correlation of initial tangent modulus and cone penetration resistance. In Proceedings of the First International Symposium on Calibration Chamber Testing,
26. Potsdam, N.Y. Edited by A.-B. Huang. Elsevier, New York, pp. 351-362.
27. Salgado, R., Mitchell, J.K., and Jamiolkowski, M. 1997. Cavity expansion and penetration resistance in sand. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(4): 344-354.
28. Vesic, A.S., and Clough, G.W. 1968. Behavior of granular materials under high stresses. Journal of the Soil Mechanics and Foundation Engineering Division, ASCE, 94(3): 661-688.
29. Voyiadjis, G.Z., Kurup, P.U., and Tumay, M.T. 1993. Preparation of large-size cohesive specimens for calibration chamber testing. Geotechnical Testing Journal, ASTM, 16(3): 339-349.
30. Yamamuro, J.A., Bopp, P.A., and Lade, P.V. 1996. One dimensional compression of sands at high pressures. Journal of the Geotechnical Engineering Division, ASCE, 122(2): 147-154.
31. Yu, H.S., and Houlsby, G.T. 1991. Finite cavity expansion in dilatant soils: loading analysis. Géotechnique, 41(1): 173-183.