-
1
-
-
0003909950
-
-
Ver 5.0, Swanson Anal Syst
-
ANSYS (1994), ANSYS User Manual Ver 5.0, Swanson Anal Syst.
-
(1994)
ANSYS User Manual
-
-
-
2
-
-
0041097550
-
Three-dimensional constitutive model for the large stretch behavior of rubber elastic membranes
-
Arruda E and Boyce M (1993), Three-dimensional constitutive model for the large stretch behavior of rubber elastic membranes, J Mech Phys Solids 41, 389.
-
(1993)
J Mech Phys Solids
, vol.41
, pp. 389
-
-
Arruda, E.1
Boyce, M.2
-
3
-
-
0348046606
-
-
ASTM D412-80, Publ July by ASTM
-
ASTM (1980), Rubber properties in tension, ASTM D412-80, Publ July by ASTM.
-
(1980)
Rubber Properties in Tension
-
-
-
4
-
-
33749072614
-
Topics in finite elasticity: Hyperelasticity of rubber, elastomers and biological tissues - with examples
-
Beatty MF (1987), Topics in finite elasticity: hyperelasticity of rubber, elastomers and biological tissues - with examples, Appl Mech Rev 40(12), 1699.
-
(1987)
Appl Mech Rev
, vol.40
, Issue.12
, pp. 1699
-
-
Beatty, M.F.1
-
5
-
-
84953648079
-
Application of finite elastic theory to the deformation of rubbery materials
-
Blatz PJ and Ko WL (1962), Application of finite elastic theory to the deformation of rubbery materials, Trans Soc Rheol 6, 223.
-
(1962)
Trans Soc Rheol
, vol.6
, pp. 223
-
-
Blatz, P.J.1
Ko, W.L.2
-
6
-
-
0024053549
-
After the Challenger: Evolution of a redesign
-
Blumenthal JL (1988), After the Challenger: Evolution of a redesign, Elas-tomerics 20(7), 10.
-
(1988)
Elas-Tomerics
, vol.20
, Issue.7
, pp. 10
-
-
Blumenthal, J.L.1
-
7
-
-
0018296657
-
Finite element approach for large strains of nearly incompressible rubber-like materials
-
Cescotto S and Fonder G (1979), Finite element approach for large strains of nearly incompressible rubber-like materials, Int J Solids Struct 15, 589.
-
(1979)
Int J Solids Struct
, vol.15
, pp. 589
-
-
Cescotto, S.1
Fonder, G.2
-
9
-
-
38249032253
-
Nonlinear elastomer analysis - survey of computer codes and case study for caliper seal
-
Chang H (1988), Nonlinear elastomer analysis - survey of computer codes and case study for caliper seal, Compul Struct 30(5), 1165.
-
(1988)
Compul Struct
, vol.30
, Issue.5
, pp. 1165
-
-
Chang, H.1
-
10
-
-
0026155051
-
Nonlinear elastic analysis of the hardness test on rubber-like materials
-
Chang W and Sun S (1991), Nonlinear elastic analysis of the hardness test on rubber-like materials, Rubber Chem Tech 64,206.
-
(1991)
Rubber Chem Tech
, vol.64
, pp. 206
-
-
Chang, W.1
Sun, S.2
-
11
-
-
0027573473
-
Expansion of a cavity in a rubber block with unequal stresses
-
Chang Y, Gent AN, and Padovan J (1993), Expansion of a cavity in a rubber block with unequal stresses, Int J Fracture 60, 283.
-
(1993)
Int J Fracture
, vol.60
, pp. 283
-
-
Chang, Y.1
Gent, A.N.2
Padovan, J.3
-
12
-
-
0028461837
-
Review of methods to characterize rubber elastic behavior for use in finite element analysis
-
Charlton D, Yang J, and Teh K. (1994), Review of methods to characterize rubber elastic behavior for use in finite element analysis, Rubber Chem Tech 67,481.
-
(1994)
Rubber Chem Tech
, vol.67
, pp. 481
-
-
Charlton, D.1
Yang, J.2
Teh, K.3
-
13
-
-
0028396158
-
Consistent finite element procedures for nonlinear rubber elasticity with higher order strain energy function
-
Chen JS, Satyamurthy KS, and Hirschfelt LR (1994), Consistent finite element procedures for nonlinear rubber elasticity with higher order strain energy function, Comput Struct 50, 715.
-
(1994)
Comput Struct
, vol.50
, pp. 715
-
-
Chen, J.S.1
Satyamurthy, K.S.2
Hirschfelt, L.R.3
-
14
-
-
33746037581
-
Pressure projection method for nearly incompressible rubber hyperelasticity - Part I: Theory
-
Chen JS and Pan C (1996a) Pressure projection method for nearly incompressible rubber hyperelasticity - Part I: Theory, J Appl Mech 63, 862.
-
(1996)
J Appl Mech
, vol.63
, pp. 862
-
-
Chen, J.S.1
Pan, C.2
-
15
-
-
33746086349
-
Pressure projection method for nearly incompressible rubber hyperelasticity - Part II: Applications
-
Chen J, Wu C, and Pan C (1996b), Pressure projection method for nearly incompressible rubber hyperelasticity - Part II: Applications, J Appl Mech 63, 869.
-
(1996)
J Appl Mech
, vol.63
, pp. 869
-
-
Chen, J.1
Wu, C.2
Pan, C.3
-
16
-
-
0031074562
-
Large deformation analysis of rubber based on a reproducing kemal particle method
-
Chen J, Pan C, and Wu CT (1997a), Large deformation analysis of rubber based on a reproducing kemal particle method, Comput Mech 19, 211.
-
(1997)
Comput Mech
, vol.19
, pp. 211
-
-
Chen, J.1
Pan, C.2
Wu, C.T.3
-
17
-
-
0030413958
-
Reproducing kernel particle methods for large deformation analysis of nonlinear structures
-
Chen J, Pan C, Wu CT, and Liu W (1997b), Reproducing kernel particle methods for large deformation analysis of nonlinear structures, Comput Methods Appl Mech Eng 139, 195.
-
(1997)
Comput Methods Appl Mech Eng
, vol.139
, pp. 195
-
-
Chen, J.1
Pan, C.2
Wu, C.T.3
Liu, W.4
-
18
-
-
0031098384
-
Perturbed Lagrangian formulation for nearly incompressible and incompressible hyperelasticity
-
Chen J, Wan W, Wu CT, and Duan W (1997c), Perturbed Lagrangian formulation for nearly incompressible and incompressible hyperelasticity, Comput Methods Appl Mech Eng 142, 335.
-
(1997)
Comput Methods Appl Mech Eng
, vol.142
, pp. 335
-
-
Chen, J.1
Wan, W.2
Wu, C.T.3
Duan, W.4
-
19
-
-
0031098384
-
Perturbed Lagrangian formulation for nearly incompressible and incompressible hyperelasticity
-
Chen J, Han W, Wu CT, and Duan W (1997d), Perturbed Lagrangian formulation for nearly incompressible and incompressible hyperelasticity, Comput Methods Appl Mech Eng 142, 335.
-
(1997)
Comput Methods Appl Mech Eng
, vol.142
, pp. 335
-
-
Chen, J.1
Han, W.2
Wu, C.T.3
Duan, W.4
-
20
-
-
0028596673
-
Performance of a high damping rubber bearing base isolation system for a shear beam structure
-
Chen Y and Ahmadi G (1994), Performance of a high damping rubber bearing base isolation system for a shear beam structure, Earthquake Eng Struct Dyn 23, 729.
-
(1994)
Earthquake Eng Struct Dyn
, vol.23
, pp. 729
-
-
Chen, Y.1
Ahmadi, G.2
-
21
-
-
0346155057
-
Finite element simulation of the long-term behavior of under-the-hood sealing systems
-
Chouchaoui B (1994), Finite element simulation of the long-term behavior of under-the-hood sealing systems, 18th Annual Meeting of the Detroit Rubber Group.
-
(1994)
18Th Annual Meeting of the Detroit Rubber Group
-
-
Chouchaoui, B.1
-
22
-
-
0026887846
-
Genuinely resultant shell finite elements accounting for geometric and material nonlinearity
-
Chroscielewski J, Makowski J, and Stumpf H (1992), Genuinely resultant shell finite elements accounting for geometric and material nonlinearity, IntJNumer Methods Eng 35, 63.
-
(1992)
Intjnumer Methods Eng
, vol.35
, pp. 63
-
-
Chroscielewski, J.1
Makowski, J.2
Stumpf, H.3
-
23
-
-
85025187460
-
Long-Term compression effects on elas-tomeric o-ring behavior
-
Clinton R and Turner RG (1990), Long-Term compression effects on elas-tomeric o-ring behavior, AIAA-90-1110-CP.
-
(1990)
AIAA-90-1110-CP
-
-
Clinton, R.1
Turner, R.G.2
-
24
-
-
0029394150
-
Nonlinear elastic deformations and stability of laminated rubber bearings
-
D’Ambrosio P, De Tommasi D, and Marzano S (1995), Nonlinear elastic deformations and stability of laminated rubber bearings, J Eng Mech 121(10), 1041.
-
(1995)
J Eng Mech
, vol.121
, Issue.10
, pp. 1041
-
-
D’ambrosio, P.1
De Tommasi, D.2
Marzano, S.3
-
25
-
-
0028508443
-
Characterization of the behavior of rubber for engineering design purposes: 1- Stress-strain relations
-
Davies C, Dilip K De, and Thomas AG (1994), Characterization of the behavior of rubber for engineering design purposes: 1- Stress-strain relations, Rubber Chem Tech 67, 716.
-
(1994)
Rubber Chem Tech
, vol.67
, pp. 716
-
-
Davies, C.1
De, D.K.2
Thomas, A.G.3
-
26
-
-
0029392196
-
Finite elasticity in spatial description: Linearization aspects with 3D membrane applications
-
De Souza Neto EA, Peric D, and Owen DRJ (1995), Finite elasticity in spatial description: linearization aspects with 3D membrane applications, Int J Numer Methods Eng 38, 3365.
-
(1995)
Int J Numer Methods Eng
, vol.38
, pp. 3365
-
-
De Souza Neto, E.A.1
Peric, D.2
Owen, D.3
-
27
-
-
0346785483
-
Nonlinear mechanics of materials
-
H Kardestuncer (ed), McGraw-Hill, New York, NY
-
Dill EH (1988), Nonlinear mechanics of materials, in Finite Element Handbook, H Kardestuncer (ed), McGraw-Hill, New York, NY, 239.
-
(1988)
Finite Element Handbook
, pp. 239
-
-
Dill, E.H.1
-
28
-
-
0009346070
-
Nonlinear thermoelasticity theory
-
Dillon OW (1962), Nonlinear thermoelasticity theory, J Mech Phys Solids 10, 123.
-
(1962)
J Mech Phys Solids
, vol.10
, pp. 123
-
-
Dillon, O.W.1
-
29
-
-
0025660593
-
Penalty function method for problems of contact
-
Donida G, Bemetti R, and Bruschi R (1990), “Penalty function” method for problems of contact, Comput Struct 36, 111.
-
(1990)
Comput Struct
, vol.36
, pp. 111
-
-
Donida, G.1
Bemetti, R.2
Bruschi, R.3
-
30
-
-
85025215644
-
Enhanced mixed method applied to rubber-like material
-
Estebenet T, Guessab A, and Jankovich E (1990), Enhanced mixed method applied to rubber-like material, Comput Struct 52, 573,1004.
-
(1990)
Comput Struct
, vol.52
, Issue.573
, pp. 1004
-
-
Estebenet, T.1
Guessab, A.2
Jankovich, E.3
-
31
-
-
0027540892
-
Geometrical interpretation of the arc length method
-
Fafard M and Massicotte B (1993), Geometrical interpretation of the arc length method, Comput Struct 46, 603.
-
(1993)
Comput Struct
, vol.46
, pp. 603
-
-
Fafard, M.1
Massicotte, B.2
-
32
-
-
0024108848
-
Development of material constants for nonlinear finite element analysis
-
Finney R and Kumar A (1987), Development of material constants for nonlinear finite element analysis, Rubber Chem Tech 61, 877.
-
(1987)
Rubber Chem Tech
, vol.61
, pp. 877
-
-
Finney, R.1
Kumar, A.2
-
33
-
-
0028393296
-
Testing techniques for measurement of bulk modulus
-
Fishman KL and Machmer D et al (1994), Testing techniques for measurement of bulk modulus, J Testing Eva! 22, 161.
-
(1994)
J Testing Eva!
, vol.22
, pp. 161
-
-
Fishman, K.L.1
Machmer, D.2
-
34
-
-
0016105327
-
Finite element analysis of incompressible materials by residual energy balance
-
Fried I (1974), Finite element analysis of incompressible materials by residual energy balance, IntJ Solids Struct 10, 993.
-
(1974)
Intj Solids Struct
, vol.10
, pp. 993
-
-
Fried, I.1
-
35
-
-
0020135847
-
Finite element computation of large rubber membrane deformations
-
Fried I (1982), Finite element computation of large rubber membrane deformations, Int JNumer Methods Eng 18, 653.
-
(1982)
Int Jnumer Methods Eng
, vol.18
, pp. 653
-
-
Fried, I.1
-
36
-
-
0024047771
-
Note on elastic energy density functions for largely deformed compressible rubber solids
-
Fried I and Johnson AR (1988a), Note on elastic energy density functions for largely deformed compressible rubber solids, Comput Methods Appl Mech Eng 69, 53.
-
(1988)
Comput Methods Appl Mech Eng
, vol.69
, pp. 53
-
-
Fried, I.1
Johnson, A.R.2
-
37
-
-
0023981832
-
Nonlinear computation of axisymmetric solid rubber deformation
-
Fried I and Johnson AR (1988b), Nonlinear computation of axisymmetric solid rubber deformation, Comput Methods Appl Mech Eng 87, 241.
-
(1988)
Comput Methods Appl Mech Eng
, vol.87
, pp. 241
-
-
Fried, I.1
Johnson, A.R.2
-
38
-
-
0025481977
-
Research, development and implementation of rubber bearings for seismic isolation
-
Fujita T, Fujita S, Tazaki S Yoshizawa T, and Suzuki S (1990), Research, development and implementation of rubber bearings for seismic isolation, JSME Int J Series III 33, 394.
-
(1990)
JSME Int J Series III
, vol.33
, pp. 394
-
-
Fujita, T.1
Fujita, S.2
Tazaki S Yoshizawa, T.3
Suzuki, S.4
-
39
-
-
0026678653
-
Alternative methods for the solution of hyperelastic problems with incompressibility
-
Gadala M (1992), Alternative methods for the solution of hyperelastic problems with incompressibility, Comput Struct 42, 1.
-
(1992)
Comput Struct
, vol.42
, pp. 1
-
-
Gadala, M.1
-
40
-
-
0028495699
-
Rubber wedge under the compression of a line load
-
Gao TS and Gao YC (1994), Rubber wedge under the compression of a line load, Int J Solids Struct 31,2393.
-
(1994)
Int J Solids Struct
, vol.31
, pp. 2393
-
-
Gao, T.S.1
Gao, Y.C.2
-
41
-
-
0026246197
-
Bulging of rubber through apertures
-
Gent A and Kim W (1991), Bulging of rubber through apertures, Rubber Chem Tech 64, 813.
-
(1991)
Rubber Chem Tech
, vol.64
, pp. 813
-
-
Gent, A.1
Kim, W.2
-
43
-
-
0027573541
-
Fracture and fatigue of bonded rubber blocks under compression
-
Gent AN and Chang TY (1993), Fracture and fatigue of bonded rubber blocks under compression, Eng Fracture Mech 44, 843.
-
(1993)
Eng Fracture Mech
, vol.44
, pp. 843
-
-
Gent, A.N.1
Chang, T.Y.2
-
44
-
-
0002163820
-
A new constitutive relation for rubber
-
Gent AN (1996), A new constitutive relation for rubber, Rubber Chem Tech 69, 59.
-
(1996)
Rubber Chem Tech
, vol.69
, pp. 59
-
-
Gent, A.N.1
-
45
-
-
0023116888
-
Stress fields in a compressed unconstrained elastomeric o-ring seal and a comparison of computer predictions and experimental results
-
George AF, Strozzi A, and Rich JT (1987), Stress fields in a compressed unconstrained elastomeric o-ring seal and a comparison of computer predictions and experimental results, Trib Int 20, 237.
-
(1987)
Trib Int
, vol.20
, pp. 237
-
-
George, A.F.1
Strozzi, A.2
Rich, J.T.3
-
46
-
-
0024029671
-
Integration of analysis and testing for the simulation of the response of hyperelastic materials
-
George ED, Haduch GA, and Jordan S (1988), Integration of analysis and testing for the simulation of the response of hyperelastic materials, FE Element Anal Des 4,19.
-
(1988)
FE Element Anal Des
, vol.4
, pp. 19
-
-
George, E.D.1
Haduch, G.A.2
Jordan, S.3
-
47
-
-
0006313522
-
Transition from micro-mechanics to computationally efficient phenomenology: Carbon black filled rubbers incorporating Mullins effect
-
Govindjee S and Simo J (1992), Transition from micro-mechanics to computationally efficient phenomenology: Carbon black filled rubbers incorporating Mullins effect, J Mech Phys Solids 40,214.
-
(1992)
J Mech Phys Solids
, vol.40
, pp. 214
-
-
Govindjee, S.1
Simo, J.2
-
48
-
-
0030246111
-
Computational methods in inverse finite elastostatics
-
Govindjee S and Mihalic P (1996), Computational methods in inverse finite elastostatics, Comput Methods Appl Mech Eng 136, 47.
-
(1996)
Comput Methods Appl Mech Eng
, vol.136
, pp. 47
-
-
Govindjee, S.1
Mihalic, P.2
-
50
-
-
0346155053
-
Analysis of elastomeric o-ring seals in compression using the FEM
-
Green I and English, C (1992), Analysis of elastomeric o-ring seals in compression using the FEM, Trib Trans 35(1), 85.
-
(1992)
Trib Trans
, vol.35
, Issue.1
, pp. 85
-
-
Green, I.1
English, C.2
-
51
-
-
0026923353
-
Theory and finite element formulation of rubber-like membrane shells using principal stretches
-
Gruttmann F and Taylor R (1992), Theory and finite element formulation of rubber-like membrane shells using principal stretches, Int J Numer Methods Eng 35, 1111.
-
(1992)
Int J Numer Methods Eng
, vol.35
, pp. 1111
-
-
Gruttmann, F.1
Taylor, R.2
-
52
-
-
0024532271
-
Design principles for vibration isolation and damping with elastomers including nonlinearity
-
Harris JA (1989), Design principles for vibration isolation and damping with elastomers including nonlinearity, Rubber Chem Tech 43, 515.
-
(1989)
Rubber Chem Tech
, vol.43
, pp. 515
-
-
Harris, J.A.1
-
54
-
-
84991028773
-
Elasticity equations for incompressible and nearly incompressible materials by a variational theorem
-
Herrmann LR (1965), Elasticity equations for incompressible and nearly incompressible materials by a variational theorem, AIAAJ 3, 1896.
-
(1965)
AIAAJ
, vol.3
, pp. 1896
-
-
Herrmann, L.R.1
-
55
-
-
0030290869
-
Large strain viscoelasticity: Continuum applications and finite element applications to elastomeric structures
-
Holzappel G (1996a) Large strain viscoelasticity: continuum applications and finite element applications to elastomeric structures, Int J Numer Methods Eng 39, 3903.
-
(1996)
Int J Numer Methods Eng
, vol.39
, pp. 3903
-
-
Holzappel, G.1
-
56
-
-
0030149895
-
Entropy elasticity of isotropic rubber-like solids at finite strain
-
Holzappel G and Simo J (1996b), Entropy elasticity of isotropic rubber-like solids at finite strain, Comput Methods Appl Mech Eng 132, 17.
-
(1996)
Comput Methods Appl Mech Eng
, vol.132
, pp. 17
-
-
Holzappel, G.1
Simo, J.2
-
57
-
-
0003453209
-
-
Prentice Hall, Englewood Cliffs NJ
-
Hughes T (1987), Finite Element Method, Prentice Hall, Englewood Cliffs NJ.
-
(1987)
Finite Element Method
-
-
Hughes, T.1
-
58
-
-
0027665908
-
Rubber viscoelasticity using a physically constrained system's stretches as internal variables
-
Johnson AR and Stacer RG (1993a), Rubber viscoelasticity using a physically constrained system's stretches as internal variables, Rubber Chem Tech 66, 567.
-
(1993)
Rubber Chem Tech
, vol.66
, pp. 567
-
-
Johnson, A.R.1
Stacer, R.G.2
-
59
-
-
0027625642
-
Viscohyperelastic modeling of rubber vulcanizates
-
Johnson AR, Young DG, and Danik JA (1993b), Viscohyperelastic modeling of rubber vulcanizates, Tire Sci Tech 21, 179.
-
(1993)
Tire Sci Tech
, vol.21
, pp. 179
-
-
Johnson, A.R.1
Young, D.G.2
Danik, J.A.3
-
60
-
-
0000171723
-
Large strain viscoelastic constitutive models for rubber - Part I: Formulations
-
Johnson AR, Quigley C, and Mead J (1994), Large strain viscoelastic constitutive models for rubber - Part I: Formulations, Rubber Chem Tech 67, 904.
-
(1994)
Rubber Chem Tech
, vol.67
, pp. 904
-
-
Johnson, A.R.1
Quigley, C.2
Mead, J.3
-
61
-
-
0029410545
-
Viscohyperelastic finite element model for rubber
-
Johnson AR, Quigley C, and Freese CE (1995), Viscohyperelastic finite element model for rubber, Comput Methods Appl Mech Eng 127, 163.
-
(1995)
Comput Methods Appl Mech Eng
, vol.127
, pp. 163
-
-
Johnson, A.R.1
Quigley, C.2
Freese, C.E.3
-
63
-
-
85072491693
-
Determination of strain energy functions for rubbers
-
(available from the Technology and Science Section, Detroit Public Library)
-
Kao B and Razgunas L (1986), Determination of strain energy functions for rubbers, SAE Paper 860816 (available from the Technology and Science Section, Detroit Public Library).
-
(1986)
SAE Paper 860816
-
-
Kao, B.1
Razgunas, L.2
-
64
-
-
0025508240
-
Geometry and contact pressure of an O-Ring mounted in seal groove
-
Karaszkiewicz A (1990), Geometry and contact pressure of an O-Ring mounted in seal groove, Indust Eng Chem Res 29, 2134.
-
(1990)
Indust Eng Chem Res
, vol.29
, pp. 2134
-
-
Karaszkiewicz, A.1
-
68
-
-
0347415953
-
Testing and development of elastomeric o-ring seals for USAF applications
-
Lawless G (1988), Testing and development of elastomeric o-ring seals for USAF applications, Rubber World, p 23.
-
(1988)
Rubber World
, pp. 23
-
-
Lawless, G.1
-
70
-
-
0030692159
-
Incremental FEM for thermomechanical contact - Part I: Tangent stiffness matrix
-
H Chung (ed), 3
-
Lin B and Nicholson DW (1997a), Incremental FEM for thermomechanical contact - Part I: Tangent stiffness matrix, in Integrity of Structures and Fluid Systems, ASME PVP Vol 356, H Chung (ed), 3.
-
(1997)
Integrity of Structures and Fluid Systems, ASME PVP
, vol.356
-
-
Lin, B.1
Nicholson, D.W.2
-
71
-
-
0030692158
-
Incremental FEM for thermomechanical contact - Part II: Application to elastomeric seals
-
H Chung (ed), 9
-
Lin B and Nicholson DW (1997b), Incremental FEM for thermomechanical contact - Part II: Application to elastomeric seals, p 9-15, in Integrity of Structures and Fluid Systems, ASME PVP Vol 356, H Chung (ed), 9.
-
(1997)
Integrity of Structures and Fluid Systems, ASME PVP
, vol.356
, pp. 9-15
-
-
Lin, B.1
Nicholson, D.W.2
-
72
-
-
0342811759
-
Nonlinear load-deflection relations of bonded elastomeric circular disks and strips
-
Ling Y, Engel P, and Brodsky W (1992), Nonlinear load-deflection relations of bonded elastomeric circular disks and strips, Rubber Chem Tech 43,917.
-
(1992)
Rubber Chem Tech
, vol.43
, pp. 917
-
-
Ling, Y.1
Engel, P.2
Brodsky, W.3
-
73
-
-
0028416581
-
Hofstetter G, and Mang HA et al (1994), 3D finite element analysis of rubber-like materials at finite strains
-
Liu CH, Hofstetter G, and Mang HA et al (1994), 3D finite element analysis of rubber-like materials at finite strains, Eng Comput 11, 111.
-
Eng Comput
, vol.11
, pp. 111
-
-
Liu, C.H.1
-
74
-
-
0025435852
-
Finite element analysis of hyperelastic large deformation crack tip fields
-
Lund R and Westman R (1990), Finite element analysis of hyperelastic large deformation crack tip fields, Int J Fracture 43, 257.
-
(1990)
Int J Fracture
, vol.43
, pp. 257
-
-
Lund, R.1
Westman, R.2
-
75
-
-
0021494878
-
Obtaining error estimates for optionally constrained finite elements
-
Malkus DS and ET Olsen (1984), Obtaining error estimates for optionally constrained finite elements, Comput Methods Appl Mech Eng 45, 331.
-
(1984)
Comput Methods Appl Mech Eng
, vol.45
, pp. 331
-
-
Malkus, D.S.1
Olsen, E.T.2
-
76
-
-
0017984529
-
Mixed FEMs - reduced and selective integration techniques: A unification of concepts
-
Malkus D and Hughes T (1978), Mixed FEMs - reduced and selective integration techniques: a unification of concepts, Comput Method Appl Mech Eng 15, 63.
-
(1978)
Comput Method Appl Mech Eng
, vol.15
, pp. 63
-
-
Malkus, D.1
Hughes, T.2
-
77
-
-
0028483090
-
A one-dimensional model for finite deformations of multilayered rubber bearings
-
Marzano S (1994), A one-dimensional model for finite deformations of multilayered rubber bearings, Int J Solids Struct 31(15), 2121.
-
(1994)
Int J Solids Struct
, vol.31
, Issue.15
, pp. 2121
-
-
Marzano, S.1
-
78
-
-
0026153553
-
Shape optimization of a rubber bearing
-
Mattheck C and Erb D (1991), Shape optimization of a rubber bearing, Int J Fatigue 13(3), 206.
-
(1991)
Int J Fatigue
, vol.13
, Issue.3
, pp. 206
-
-
Mattheck, C.1
Erb, D.2
-
80
-
-
0029251067
-
Entropic thermoelasticity at finite strains: Aspects of the formulation and numerical implementation
-
Miehe C (1995), Entropic thermoelasticity at finite strains: Aspects of the formulation and numerical implementation, Computer Methods Appl Mech Eng 120,243.
-
(1995)
Computer Methods Appl Mech Eng
, vol.120
, pp. 243
-
-
Miehe, C.1
-
81
-
-
0028466105
-
Method for determining the shear modulus and Poisson’s ratio of polymer materials
-
Migwi C, Darby M, Wostenholm G, Yates B, Duffy R, and Moss M (1994), Method for determining the shear modulus and Poisson’s ratio of polymer materials, J Mat Sci 29, 3430.
-
(1994)
J Mat Sci
, vol.29
, pp. 3430
-
-
Migwi, C.1
Darby, M.2
Wostenholm, G.3
Yates, B.4
Duffy, R.5
Moss, M.6
-
82
-
-
0024050713
-
Application of finite element analysis in the design of automotive elastomeric components
-
Morman KN and Pan TY (1988), Application of finite element analysis in the design of automotive elastomeric components, Rubber Chem Tech 61,503.
-
(1988)
Rubber Chem Tech
, vol.61
, pp. 503
-
-
Morman, K.N.1
Pan, T.Y.2
-
83
-
-
0005814391
-
Critical tearing energy in a circumferentially-cracked circular cylinder of rubber under finite deformation
-
Morman K, Mazich KA, Oblinger F, Zhang F, and Killgoar PC (1992), Critical tearing energy in a circumferentially-cracked circular cylinder of rubber under finite deformation, Int J Fracture 53, 129.
-
(1992)
Int J Fracture
, vol.53
, pp. 129
-
-
Morman, K.1
Mazich, K.A.2
Oblinger, F.3
Zhang, F.4
Killgoar, P.C.5
-
84
-
-
0015986408
-
Stresses in nearly incompressible materials by finite elements with application to the calculation of excess pore pressures
-
Naylor DJ (1974), Stresses in nearly incompressible materials by finite elements with application to the calculation of excess pore pressures, Int J Numer Methods Eng 8, 443.
-
(1974)
Int J Numer Methods Eng
, vol.8
, pp. 443
-
-
Naylor, D.J.1
-
85
-
-
0001411353
-
Finite element analysis in design with rubber, Rubber Reviews
-
Nicholson DW and Nelson N (1990), Finite element analysis in design with rubber, Rubber Reviews, Rubber Chem Tech 63, 638.
-
(1990)
Rubber Chem Tech
, vol.63
, pp. 638
-
-
Nicholson, D.W.1
Nelson, N.2
-
86
-
-
0029179120
-
Tangent modulus matrix for finite element analysis of hyperelastic materials
-
Nicholson DW (1995), Tangent modulus matrix for finite element analysis of hyperelastic materials, Acta Mech 112, 187.
-
(1995)
Acta Mech
, vol.112
, pp. 187
-
-
Nicholson, D.W.1
-
87
-
-
0029698720
-
Theory of thermohyperelasticity for near-incompressible elastomers
-
Nicholson DW and Lin B (1996), Theory of thermohyperelasticity for near-incompressible elastomers, Acta Mech 116, 15.
-
(1996)
Acta Mech
, vol.116
, pp. 15
-
-
Nicholson, D.W.1
Lin, B.2
-
88
-
-
0031356111
-
Finite element method for thermomechanical response of near-incompressible elastomers
-
Nicholson DW and Lin B (1997a), Finite element method for thermomechanical response of near-incompressible elastomers, Acta Mech 124, 181.
-
(1997)
Acta Mech
, vol.124
, pp. 181
-
-
Nicholson, D.W.1
Lin, B.2
-
89
-
-
85025185495
-
Incremental finite element equations for thermomechanical of elastomers: Effect of Boundary Conditions including Contact
-
Nicholson DW and Lin B (1997b), Incremental finite element equations for thermomechanical of elastomers: Effect of Boundary Conditions including Contact, to appear in Acta Mech.
-
(1997)
To Appear in Acta Mech
-
-
Nicholson, D.W.1
Lin, B.2
-
90
-
-
85025194364
-
On the tangent modulus tensor in hy-perelasticty
-
to appear in
-
Nicholson DW and Lin B (1997c), On the tangent modulus tensor in hy-perelasticty, to appear in Acta Mech.
-
(1997)
Acta Mech
-
-
Nicholson, D.W.1
Lin, B.2
-
91
-
-
0025226989
-
Analysis of gasket-o-seal design using nonlinear FEA
-
Energy-sources Technology Conf, New Orleans LA
-
Nilkanth V and Naderi A (1990), Analysis of gasket-o-seal design using nonlinear FEA, ASME Paper 90-PET-21, Energy-sources Technology Conf, New Orleans LA.
-
(1990)
ASME Paper 90-PET-21
-
-
Nilkanth, V.1
Naderi, A.2
-
93
-
-
0022751847
-
Recent advances in the phenomenological theory of rubber elasticity
-
Ogden RW (1986), Recent advances in the phenomenological theory of rubber elasticity, Rubber Chem Tech 59, 361.
-
(1986)
Rubber Chem Tech
, vol.59
, pp. 361
-
-
Ogden, R.W.1
-
94
-
-
0026202293
-
Surface wrinkles and local bifurcations in elastomeric components: Seals and gaskets - Part 1: Theory
-
Padovan J, Tabaddor F, and Gent A (1991), Surface wrinkles and local bifurcations in elastomeric components: seals and gaskets - Part 1: Theory, FE Element Anal Des 9, 193.
-
(1991)
FE Element Anal Des
, vol.9
, pp. 193
-
-
Padovan, J.1
Tabaddor, F.2
Gent, A.3
-
95
-
-
0026202375
-
Surface wrinkles and local bifurcations in elastomeric components: Seals and gaskets - Part II: Applications
-
Padovan J, Johnson K, and Gent A (1991), Surface wrinkles and local bifurcations in elastomeric components: seals and gaskets - Part II: Applications, FE Element Anal Des 9, 211.
-
(1991)
FE Element Anal Des
, vol.9
, pp. 211
-
-
Padovan, J.1
Johnson, K.2
Gent, A.3
-
96
-
-
0030212533
-
Generalized Newton method for higher order finite element approximations in non-linear elasticity
-
Papadopoulos P and Taylor R (1996), Generalized Newton method for higher order finite element approximations in non-linear elasticity, Int J Numer Method Eng 39, 2635.
-
(1996)
Int J Numer Method Eng
, vol.39
, pp. 2635
-
-
Papadopoulos, P.1
Taylor, R.2
-
97
-
-
0024715028
-
Consistent tangent stiffness matrix for three-dimensional non-linear contact analysis
-
Parisch H (1989), Consistent tangent stiffness matrix for three-dimensional non-linear contact analysis, Int J Numer Methods Eng 28, 1803.
-
(1989)
Int J Numer Methods Eng
, vol.28
, pp. 1803
-
-
Parisch, H.1
-
98
-
-
0346785482
-
Comparison of finite element techniques for contact stress analysis
-
J Mottershead (ed), Pergamon Press, Oxford UK
-
Pascoe S, Mottershead J, and Hellen TK (1989), Comparison of finite element techniques for contact stress analysis, in Stress and Vibration Analysis, J Mottershead (ed), Pergamon Press, Oxford UK.
-
(1989)
Stress and Vibration Analysis
-
-
Pascoe, S.1
Mottershead, J.2
Hellen, T.K.3
-
99
-
-
0042470062
-
Measurement of elastomer’s bulk modulus by means of a confined compression test
-
Peng SH, Shimbori T, and Naderi A (1994), Measurement of elastomer’s bulk modulus by means of a confined compression test, Rubber Chem Tech 67, 872.
-
(1994)
Rubber Chem Tech
, vol.67
, pp. 872
-
-
Peng, S.H.1
Shimbori, T.2
Naderi, A.3
-
100
-
-
0031076951
-
Compressible approach in finite element analysis of rubber-elastic materials
-
Peng SH and Chang W (1997), Compressible approach in finite element analysis of rubber-elastic materials, Comput Struct 62, 573.
-
(1997)
Comput Struct
, vol.62
, pp. 573
-
-
Peng, S.H.1
Chang, W.2
-
101
-
-
0345169465
-
Quality control testing of rubber shear modulus
-
Peacock C (1992), Quality control testing of rubber shear modulus, reprinted from Elastomerics.
-
(1992)
Reprinted from Elastomerics
-
-
Peacock, C.1
-
102
-
-
0000708891
-
Volume changes accompanying the extension of rubber
-
Penn RW (1970), Volume changes accompanying the extension of rubber, Trans Soc Rheol 14, 509.
-
(1970)
Trans Soc Rheol
, vol.14
, pp. 509
-
-
Penn, R.W.1
-
103
-
-
0039793619
-
Large strain viscoelastic constitutive models for rubber - Part II: Determination of material constants
-
Quigley C, Mead JL, and Johnson AR (1995), Large strain viscoelastic constitutive models for rubber - Part II: Determination of material constants, Rubber Chem Tech 68, 230.
-
(1995)
Rubber Chem Tech
, vol.68
, pp. 230
-
-
Quigley, C.1
Mead, J.L.2
Johnson, A.R.3
-
104
-
-
0025953245
-
State-of-the-art elastomeric bridge bearing design
-
Roeder CW and Stanton JF (1991), State-of-the-art elastomeric bridge bearing design, A Cl Struct.788(1), 31.
-
(1991)
A Cl Struct
, vol.788
, Issue.1
, pp. 31
-
-
Roeder, C.W.1
Stanton, J.F.2
-
105
-
-
0028344461
-
Finite element formulation of hyperelastic plane frames subjected to nonconservative loads
-
Saje M (1994), Finite element formulation of hyperelastic plane frames subjected to nonconservative loads, Comput Struct 50(2), 177.
-
(1994)
Comput Struct
, vol.50
, Issue.2
, pp. 177
-
-
Saje, M.1
-
106
-
-
0026766016
-
Theory and numerical analysis of shells undergoing large elastic strains
-
Schieck B (1992), Theory and numerical analysis of shells undergoing large elastic strains, IntJ Solids Struct 29(6), 689.
-
(1992)
Intj Solids Struct
, vol.29
, Issue.6
, pp. 689
-
-
Schieck, B.1
-
107
-
-
0026122993
-
Creasing singularities in compressible elastic materials
-
Silling SA (1991), Creasing singularities in compressible elastic materials, J Appl Mech 58, 70.
-
(1991)
J Appl Mech
, vol.58
, pp. 70
-
-
Silling, S.A.1
-
108
-
-
0021443506
-
The analysis of multilayer elastomeric bearings
-
Simo J and Kelly JM (1984a), The analysis of multilayer elastomeric bearings, J Appl Mech 51, 256.
-
(1984)
J Appl Mech
, vol.51
, pp. 256
-
-
Simo, J.1
Kelly, J.M.2
-
109
-
-
0026103678
-
Quasi-incompressible finite elasticity in principal stretches. Continuum basis and numerical algorithms
-
Simo J and Taylor R (1991), Quasi-incompressible finite elasticity in principal stretches. Continuum basis and numerical algorithms, Comput Methods Appl Mech Eng 85, 273.
-
(1991)
Comput Methods Appl Mech Eng
, vol.85
, pp. 273
-
-
Simo, J.1
Taylor, R.2
-
110
-
-
0026867998
-
Geometrically nonlinear enhanced strain mixed-models and the method of incompatible modes
-
Simo J and Armero F (1992a), Geometrically nonlinear enhanced strain mixed-models and the method of incompatible modes, Int J Numer Methods Eng 33, 1413.
-
(1992)
Int J Numer Methods Eng
, vol.33
, pp. 1413
-
-
Simo, J.1
Armero, F.2
-
111
-
-
0026626125
-
An augmented Lagrangian treatment of contact problems involving friction
-
Simo J and Laursen T (1992b), An augmented Lagrangian treatment of contact problems involving friction, Comput Struct 42, 97.
-
(1992)
Comput Struct
, vol.42
, pp. 97
-
-
Simo, J.1
Laursen, T.2
-
112
-
-
0021128004
-
Finite element analysis of the stability of multilayer elastomeric bearings
-
Simo J and Kelly JM (1984b), Finite element analysis of the stability of multilayer elastomeric bearings, Eng Struct 6, 162.
-
(1984)
Eng Struct
, vol.6
, pp. 162
-
-
Simo, J.1
Kelly, J.M.2
-
114
-
-
0023389726
-
Three dimensional finite elements for incompressible media
-
Sternberg R (1987), Three dimensional finite elements for incompressible media, Comput Methods Appl Mech Eng 63, 261.
-
(1987)
Comput Methods Appl Mech Eng
, vol.63
, pp. 261
-
-
Sternberg, R.1
-
115
-
-
0019055677
-
Nonlinear viscoelastic characterization of a natural rubber gum vulcanizate
-
Sullivan JL, Morman KN, and Pett RA (1980), Nonlinear viscoelastic characterization of a natural rubber gum vulcanizate, Rubber Chem Tech 53, 805.
-
(1980)
Rubber Chem Tech
, vol.53
, pp. 805
-
-
Sullivan, J.L.1
Morman, K.N.2
Pett, R.A.3
-
116
-
-
0023170746
-
Finite element formulation for nonlinear incompressible elastic and inelastic analysis
-
Sussman T and Bathe K (1987), Finite element formulation for nonlinear incompressible elastic and inelastic analysis, Comput Struct 26(1/2), 357.
-
(1987)
Comput Struct
, vol.26
, Issue.1-2
, pp. 357
-
-
Sussman, T.1
Bathe, K.2
-
117
-
-
0022045720
-
Constitutive model for high elongation elastic materials
-
Swanson SR (1985), Constitutive model for high elongation elastic materials, J Eng Mat Tech 105, 110.
-
(1985)
J Eng Mat Tech
, vol.105
, pp. 110
-
-
Swanson, S.R.1
-
118
-
-
0024901332
-
Finite element analysis of a rubber block in frictional contact
-
Tabaddor F (1989), Finite element analysis of a rubber block in frictional contact, Comput Struct 32, 549.
-
(1989)
Comput Struct
, vol.32
, pp. 549
-
-
Tabaddor, F.1
-
119
-
-
0026189213
-
Compression of rubber elastic sphere over a large range of displacements - Part 1: Theoretical
-
Tatara Y (1991), Compression of rubber elastic sphere over a large range of displacements - Part 1: Theoretical study, J Eng Mat Tech 113, 285.
-
(1991)
Study, J Eng Mat Tech
, vol.113
, pp. 285
-
-
Tatara, Y.1
-
120
-
-
0027578477
-
Large deformations of a rubber sphere under diametrical compression - Part 1: Theoretical analysis
-
Tatara Y (1993a), Large deformations of a rubber sphere under diametrical compression - Part 1: Theoretical analysis, JSME Int J Series A 36(2), 190.
-
(1993)
JSME Int J Series A
, vol.36
, Issue.2
, pp. 190
-
-
Tatara, Y.1
-
121
-
-
0027575485
-
Large deformations of a rubber sphere under diametrical compression: Part 2: Experiments
-
Tatara Y (1993b), Large deformations of a rubber sphere under diametrical compression: Part 2: Experiments, JSME IntJ Series A 36, 197.
-
(1993)
JSME Intj Series A
, vol.36
, pp. 197
-
-
Tatara, Y.1
-
122
-
-
0026838117
-
Finite element analysis of laminated rubber bearing seed in base isolation system
-
Takayama M et al (1990), Finite element analysis of laminated rubber bearing seed in base isolation system, Rubber Chem Tech 65, 46.
-
(1990)
Rubber Chem Tech
, vol.65
, pp. 46
-
-
Takayama, M.1
-
123
-
-
0346155051
-
Mechanics of rubber elasticity
-
AS Dunn (ed), John Wiley Interscience, New York
-
Treloar L (1974), Mechanics of rubber elasticity, in Rubber and Rubber Elasticity, AS Dunn (ed), John Wiley Interscience, New York.
-
(1974)
Rubber and Rubber Elasticity
-
-
Treloar, L.1
-
124
-
-
0019058825
-
Contribution to the mathematical description of stress strain behavior of elastomers
-
Tobisch K (1980), Contribution to the mathematical description of stress strain behavior of elastomers, Rubber Chem Tech 53, 836.
-
(1980)
Rubber Chem Tech
, vol.53
, pp. 836
-
-
Tobisch, K.1
-
125
-
-
0019634469
-
Three parameter strain energy density function for filled and unfilled elastomers
-
Tobisch K (1981), Three parameter strain energy density function for filled and unfilled elastomers, Rubber Chem Tech 54, 930.
-
(1981)
Rubber Chem Tech
, vol.54
, pp. 930
-
-
Tobisch, K.1
-
127
-
-
0000757497
-
Strain energy function of a hyperelastic material in terms of extension ratios
-
Valanis K and Landel RF (1967), Strain energy function of a hyperelastic material in terms of extension ratios, J Appl Phys 38,2997.
-
(1967)
J Appl Phys
, vol.38
, pp. 2997
-
-
Valanis, K.1
Landel, R.F.2
-
128
-
-
0023210088
-
Application of a penalty function to void growth in non-linear incompressible materials
-
Wander I, Banks-Sills L, and Levit I (1987), Application of a penalty function to void growth in non-linear incompressible materials, Comput Struct 26(5), 733.
-
(1987)
Comput Struct
, vol.26
, Issue.5
, pp. 733
-
-
Wander, I.1
Banks-Sills, L.2
Levit, I.3
-
131
-
-
0029209103
-
Kinking analysis by hyper-elastic FEM
-
Watanabe H (1995), Kinking analysis by hyper-elastic FEM, JSME Int J Series A 38(1), 30.
-
(1995)
JSME Int J Series A
, vol.38
, Issue.1
, pp. 30
-
-
Watanabe, H.1
-
132
-
-
0027594160
-
Thermophysical properties of elastomers
-
Williams ME, Darby M, Wostenholm G, Yates B, Duffy R, and Moss M (1993), Thermophysical properties of elastomers, J Mat Sci 28,2815.
-
(1993)
J Mat Sci
, vol.28
, pp. 2815
-
-
Williams, M.E.1
Darby, M.2
Wostenholm, G.3
Yates, B.4
Duffy, R.5
Moss, M.6
-
133
-
-
0025545205
-
Fully non-linear axisymmetrical membrane element for rubber-like materials
-
Wriggers P and Taylor R (1990), Fully non-linear axisymmetrical membrane element for rubber-like materials, Eng Comput 7, 303.
-
(1990)
Eng Comput
, vol.7
, pp. 303
-
-
Wriggers, P.1
Taylor, R.2
-
134
-
-
0025532442
-
Mixed FEM for large deformation analysis of incompressible hyperelastic materials
-
Yamada T and Kikuchi N (1990), Mixed FEM for large deformation analysis of incompressible hyperelastic materials, NEED JOURNAL NAME, 39,61.
-
(1990)
NEED JOURNAL NAME
, vol.39
, pp. 61
-
-
Yamada, T.1
Kikuchi, N.2
-
135
-
-
0027302063
-
Arbitrary Lagrangian-Eulerian FEM for incompressible hyperelasticity
-
Yamada T and Kikuchi F (1993), Arbitrary Lagrangian-Eulerian FEM for incompressible hyperelasticity, Comput Methods Appl Mech Eng 102, 149.
-
(1993)
Comput Methods Appl Mech Eng
, vol.102
, pp. 149
-
-
Yamada, T.1
Kikuchi, F.2
-
136
-
-
0027701267
-
Forms of the strain energy function for rubber
-
Yeoh G (1993), Forms of the strain energy function for rubber, Rubber Chem Tech 66, 755.
-
(1993)
Rubber Chem Tech
, vol.66
, pp. 755
-
-
Yeoh, G.1
-
137
-
-
0027590204
-
Theory and computation of the steady state harmonic response of viscoelastic rubber parts
-
Zdunek AB (1993), Theory and computation of the steady state harmonic response of viscoelastic rubber parts, Comput Methods Appl Mech Eng 105, 63.
-
(1993)
Comput Methods Appl Mech Eng
, vol.105
, pp. 63
-
-
Zdunek, A.B.1
-
138
-
-
0346785480
-
Advanced sealing technology for the defense industry
-
Zielinski RE and Kosty J (1988), Advanced sealing technology for the defense industry, Rubber World, 18.
-
(1988)
Rubber World
, pp. 18
-
-
Zielinski, R.E.1
Kosty, J.2
|