A compressible approach in finite element analysis of rubber-elastic materials

Computers and Structures

Volumn 62, Issue 3, 1997, Pages 573-593

  Peng, Shu H ^a,b   Chang, Wenji V ^a  

^a University of Southern California ^*  (United States)

^b PARKER HANNIFIN CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; ELASTIC MODULI; FINITE ELEMENT METHOD; STRAIN;

LAME CONSTANT; RUBBER ELASTIC MATERIALS; STRAIN ENERGY FUNCTION;

SYNTHETIC RUBBER;

EID: 0031076951     PISSN: 00457949     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0045-7949(96)00195-2     Document Type: Article

References (61)

1. A. N. Gent, Engineering with Rubber. Hanser Publishers (1992).
2. M. S. Gadala, Comput. Struct. 42, 841 (1986).
3. R. W. Ogden, Proc. R. Soc. Lond. A 326, 565 (1972).
4. R. W. Ogden, Non-linear Elastic Deformations. Wiley, New York (1984).
5. L. R. Treloar, The Physics of Rubber Elasticity, 3rd Edn. Oxford University Press, Oxford (1975).
6. M. Mooney, J. appl. Phys. 11, 582 (1940).
7. R. S. Rivlin, Phil. Trans. R. Soc. Lond. A 241, 379 (1948).
8. A. Isihara, N. Hashitsume and M. Tatibana, J. Chem. Phys. 19, 1508 (1951).
9. A. N. Gent and A. G. Thomas, J. Polym. Sci. 28, 625 (1958).
10. P. J. Blatz and J. L. Ko, Trans. Soc. Rheol. 5, 223 (1962).
11. L. J. Hart-Smith, Zamp 17, 608 (1966).
12. N. W. Tschoegl, J. Polym. Sci. A1, 1959 (1971).
13. S. R. Swanson, J. Engng Mater. Tech. ASME Trans. 107, 110 (1985).
14. K. C. Valanis and R. F. Landel, J. appl. Phys. 38, 2997 (1967).
15. Y. Obata, S. Kawabata and H. Kawai, J. Polym. Sci. A2, 903 (1970).
16. S. T. J. Peng and R. F. Landel, J. appl. Phys. 43, 3064 (1972).
17. P. J. Blatz, S. C. Sharda and N. W. Tschoegl, Trans. Soc. Rheol. 18, 145 (1974).
18. P. J. Blatz, S. C. Sharda and N. W. Tschoegl, Lett. appl. Engng Sci. 2, 53 (1974).
19. Y. C. Fung, Foundations of Solid Mechanics. Prentice-Hall, Englewood Cliffs, NJ (1965).
20. R. S. Rivlin and K. N. Sawyers, Trans. Soc. Rheol. 20, 545 (1976).
21. E. D. George Jr, G. A. Haduch and S. Jordan, Finite Eiern. Anal. Des. 4, 19 (1988).
22. P. Le Tallec, Proc. Int. Conf. on Comput. Methods in Nonlinear Mechanics, University of Texas at Austin, September (1974).
23. T. Sussman and K. J. Bathe, Comput. Struct. 26, 357 (1987).
24. J. T. Oden, Finite Elements of Nonlinear Continua. McGraw-Hill, New York (1972).
25. O. C. Zienkiewicz, The Finite Element Method, 3rd Edn. Mc-Graw-Hill, New York (1977).
26. P. A. Kakavas, PhD thesis, Department of Chemical Engineering, University of Southern California, Los Angeles (1987).
27. L. R. Hermmann and R. Toms, J. appl. Mech. 31, 148 (1964).
28. L. R. Hermmann, AIAA J. 3, 1896 (1965).
29. S. W. Key, Int. J. Solids Struct. 5, 951 (1969).
30. T. Scharnhorst and T. H. H. Pian, Int. J. numer. Meth. Engng 12, 665 (1978).
31. J. T. Oden and J. Key, Int. J. Solids Struct. 6, 497 (1970).
32. M. S. Gadala, Comput. Struct. 42, 1 (1992).
33. P. Tong, Int. J. Solids Struct. 5, 455 (1969).
34. T. H. H. Pian and S. W. Lee, AIAA J. 14, 824 (1976).
35. K. Washizu, Variational Methods in Elasticity and Plasticity, 3rd Edn. Pergamon Press, Oxford (1982).
36. E. Jankovich, F. Leblanc, M. Durand and M. Bercovier, Comput. Struct. 14, 359 (1981).
37. J. H. Argyris, P. C. Dunne, T. Angelopoulos and B. Bichat. Comput. Meth. appl. Mech. Engng 4, 219 (1974).
38. J. T. Oden, Proc. Symp. on Finite Element Method. Science Press, Beijing, China and Gordon and Breach, New York (1982).
39. T. J. R. Hughes, J. appl. Mech. 44, 182 (1977).
40. D. Malkus, Finite element analysis of incompressible solids. PhD thesis, Boston University (1976).
41. A. B. Zdunek and M. Bercovier, In: Proc. Sixth Int. Conf. on Vehicle Structural Mechanics, Detroit, April. Society of Automotive Engineers (1986).
42. D. S. Malkus and T. J. R. Hughes, Comput. Meth. appl. Mech. Engng 15, 63 (1978).
43. J. T. Oden and N. Kikuchi, Int. J. numer. Meth. Engng 18, 701 (1982).
44. J. T. Oden, Finite Elements of Nonlinear Continua - An Introduction, Vol. 1. McGraw-Hill, New York (1972).
45. R. W. Penn, Trans. Soc. Rheol. 14, 509 (1970).
46. Y. Obata, PhD thesis, School of Engineering, Kyoto University, Japan (1974).
47. S. H. Peng, T. Shimbori and A. Naderi, Rubber Chem. Technol. 67, 871 (1994).
48. S. Sun, PhD thesis, Department of Chemical Engineering, University of Southern California, Los Angeles (1994).
49. J. H. Argyris, P. C. Dunne and M. Muller, Comput. Meth. Appl. Mech. Engng 13, 245 (1979).
50. AFEM Manual. FEM Engineering, Los Angeles, CA (1989).
51. ABAQUS Theory Manual (Version 4.8). Hibbitt, Karlsson and Sorensen, Inc., Providence, Rhode Island (1989).
52. K. J. Bathe, Finite Element Procedures in Engineering Analysis. Prentice-Hall, Englewood Cliffs, NJ (1981).
53. B. R. Seth, Second Order Effects in Elasticity, Plasticity and Fluid Dynamics. Pergamon Press, Oxford (1965).
54. P. Blatz, S. Shadra and N. Tschoegl, Trans. Soc. Rheol. 18, 145 (1974).
55. MARC Analysis Research Corp., On the implementation of the Ogden rubber-elastic model into MARC, California, April (1991).
56. F. T. Wall and P. J. Flory, J. Chem. Phys. 18, 108 (1950).
57. F. T. Wall and P. J. Flory, J. Chem. Phys. 19, 1435 (1951).
58. S. H. Peng, PhD thesis, Department of Chemical Engineering, University of Southern California, Los Angeles (1995).
59. W. V. Chang and S. H. Peng, Int. J. Fracture 53, 77 (1992).
60. W. V. Chang and S. H. Peng, J. Adhes. Sci. Technol. 6, 919 (1992).
61. R. C. Batra, Int. J. numer. Meth. Engng 15, 871 (1980).