The estimation of acetabular cup wear volume from two-dimensional measurements: A comprehensive analysis

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 212, Issue 4, 1998, Pages 281-291

  Derbyshire, B ^a,b  

^a Ashton under Lyne   (United Kingdom)

^b Ortho Mechanics Research   (United Kingdom)

Author keywords

Hip; Measurement; Prosthesis; Wear

Indexed keywords

JOINTS (ANATOMY); NUMERICAL ANALYSIS; WEAR OF MATERIALS;

ACETABULAR CUP; WEAR MEASUREMENT;

HIP PROSTHESES;

ACETABULUM; ANTHROPOMETRY; ARTICLE; BIOLOGICAL MODEL; HIP PROSTHESIS; HISTOLOGY; HUMAN; METHODOLOGY; PROSTHESIS; PROSTHESIS FAILURE; RADIOGRAPHY; REPRODUCIBILITY; SENSITIVITY AND SPECIFICITY; STANDARD;

ACETABULUM; ANTHROPOMETRY; HIP PROSTHESIS; HUMANS; MODELS, BIOLOGICAL; PROSTHESIS DESIGN; PROSTHESIS FAILURE; REPRODUCIBILITY OF RESULTS; SENSITIVITY AND SPECIFICITY;

EID: 0031616211     PISSN: 09544119     EISSN: None     Source Type: Journal    
DOI: 10.1243/0954411981534060     Document Type: Article

References (33)

1. Wroblcwski, B. M. and Siney, P. D. Charnley low-friction arthroplasty of the hip. Long-term results. Clin. Orthop. Rel Res., 1993,292, 191-201.
2. Owen, T. D., Moran, C. G., Smith, S. R. and Pindcr, I. M. Results of uncemented porous-coated anatomic total hip replacements. J. Bone Jt Surg., 1994, 76B, 258-262.
3. Howie, D. W., Roberts, B. V., Oakshott, R. and Mathey, B. A. A rat model of résorption at the cement-bone interface in the presence of polyethylene wear particles. J. Bone Jt Surg., 1988, 70A, 257-263.
4. Livermore, J., Ilstrup, D. and Morrey, B. Effect of femoral head size on wear of the polyethylene acetabular component. J. Bone Jt Surg., 1990, 72A, 518-528.
5. Willert, H. G., Bertram, H. and Buchhorn, G. H. Osteolysis inalloarthroplastyofthehip. Clin. Orthop. Rel. Res., 1990, 258, 95-107.
6. Schmalzried, T. P., Kwong, L. M., Jasty, M., Sedlacek, R. C., Haire, T. C, O'Connor, D. O., Bragdon, C. R., Kabo, J. M., Malcolm, A. J. and Harris, W. H. The mechanism of loosening of cemented acetabular components in total hip arthroplasty. Clin. Orthop. Rel. Res., 1992, 274, 60-78.
7. Murray, D. W. and Rushton, N. Macrophages stimulate bone résorption when they phagocytose particles. J. Bone Jt Surg., 1990, 77B, 988-992.
8. Derbyshire, B., Fisher, J., Dowson, D., Hardaker, C. and Brummitt, K. Comparative study of the wear of UWMWPE with zirconia ceramic and stainless steel femoral heads in artificial hip joints. Med. Engng Phys., 1994, 16, 229-236.
9. Campbell, P., Ma, S., Yearn, B., McKellop, H., Schmalzreid, T. P. and Amstutz, H. C. Isolation of predominantly submicron-sized UHMWPE wear particles from periprosthetic tissue. J. Biomed. Mat. Res., 1995, 29, 127-131.
10. Bragdon, C. R., O'Connor, D. O., Lowenstein, J. D., Jasty, M. and Syniuta, W. D. The importance of multidirectional motion on the wear of polyethylene. Proc. Instn Mech. Engrs, Part //, Journal of Engineering in Medicine, 1996, 210, 157-165.
11. Hall, R. M., Unsworth, A., Sincy, P. and Wroblewski, B. M. Wear in retrieved Charnley acetabular sockets. Proc. Instn Mech. Engrs, Part H, Journal of Engineering in Medicine, 1996, 210, 197-207.
12. Dumbleton, J. H., Stark, C., Wang, A. and Sun, D. C. Stabilized UHMWPE with improved oxidation and wear resistance. J. Bone Jt Surg., 1997, 79B (Suppl. 1), 104.
13. Lewis, G. Polyethylene wear in total hip and knee arthroplasties. J. Biomed. Mater. Res. (Appl. Biomater.), 1997, 38, 55-75.
14. Wang, A., Stark, C. and Dumbleton, J. H. Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint replacement prostheses. Proc. Instn Mech. Engrs, Part H, Journal of Engineering in Medicine, 1996, 210, 141-155.
15. Atkinson, J. R., Dowson, D., Isaac, J. H. and Wroblewski, B. M. Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints. Wear, 1985, 104, 225-244.
16. Wroblewski, B. M. Direction and rate of socket wear in Charnley low-friction arthroplasty. J. Bone Jt Surg., 1985, 67B, 757-761.
17. Gebhard, J. S., Kabo, M. and Amstutz, H. C. Socket wear and frictional torque in 'long term' conventional hip implants. Trans. Orthop. Res. Soc., 1990, 15, 256.
18. Kabo, J. M., Gebhard, J. S., Loren, G. and Amstutz, II. C. In vivo wear of polyethylene acetabular components. J. Bone Jt Surg., 1993, 75B, 254-258.
19. Hall, R. M., Unsworth, A., Craig, P. S., Hardakcr, C., Sincy, P. and Wroblcwski, B. M. Measurement of wear in retrieved acetabular sockets. Proc. Instn Mech. Engrs, Part //, Journal of Engineering in Medicine, 1995, 209, 233-242.
20. Hashimoto, Y., Bauer, T. W., Jiang, M. and Stulberg, B. N. Polyethylene wear in total hip arthroplasty: volumetric wear measurement of retrieved acetabular components. Trans. Ort hop. Res. Soc., 1995, 20, 116.
21. Sychtcrz, C. J., Moon, K. H., Hashimoto, Y., Tercfenko, K. M., Engh, C. A. and Bauer, T. W. Wear of polyethylene cups in total hip arthroplasty. J. Bone Jt Siirg., 1996, 78A, 1193-1200.
22. Ohlin, A. and Sclvik, G. Socket wear assessment. A comparison of three different radiographie methods. J. Arthroplasty, 1993, 8, 427-431.
23. Charnley, J. and Halley, D. K. Rate of wear in total hip replacement. Clin. Orthop. Rel. Res., 1975, 112, 170-179.
24. Griffith, M. J., Seidcnstcin, M. K., Williams, D. and Charnley, J. Socket wear in Charnley low-friction arthroplasty of the hip. Clin. Ortliop. Rel. Res., 1978, 137, 37-47.
25. Clarke, I. C., Black, K., Rcnnie, C. and Amstutz, H. C. Can wear in total hip arthroplasties be assessed from radiographs? Clin. Orthop. Rel. Res., 1976, 121, 126-142.
26. Ilchmann, T., Mjoberg, B. and Wingstrand, II. Measurement accuracy in acetabular cup wear. J. Arthroplasty, 1995, 10, 636-642.
27. Dcvanc, P. A., Bourne, R. B., Rorabcck, C. H., Hardie, R. M. and Hörne, J. G. Measurement of polyethylene wear in metal-backed acetabular cups. Clin. Orthop. Rel. Res., 1995, 319, 303-316.
28. Dcvane, P. A., Bourne, R. B., Rorabeck, C. IL, MacDonald, S. and Robinson, E. J. Measurement of polyethylene wear in metal-backed cups. Clin. Orthop. Rel. Res., 1995, 319, 317-326.
29. Devane, P. A. and Hörne, J. G. Three-dimensional wear of all-polyethylene acetabular components. A new method of polyethylene wear measurement. J. Bone Jt Surg., 1996, 78B(Suppl. 1), 22.
30. Derbyshire, B., Hardakcr, C. S., Fisher, J., Dowson, D. and Brummitt, K. Assessment of the change in volume of acetabular cups using a coordinate measuring machine. Proc. Instn Mech. Engnrs, Part H, Journal of Engineering in Medicine, 1994, 208, 151-158.
31. Charnley, J., Kamangar, A. and Longficld, M. D. The optimum size of prosthetic heads in relation to the wear of plastic sockets in total replacement of the hip. Med. Bio. Engng, 1969, 7, 31-39.
32. Dowson, D., Jobbins, B. and Seycd-Harraf, A. An evaluation of the penetration of ceramic femoral heads into polyethylene acetabular cups. Wear, 1993, 162-164, 880-889.
33. Derbyshire, B. Internal Report, OrthoMechanics Research, 1997.