Assessing 'road-friendliness': A review

Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering

Volumn 211, Issue 6, 1997, Pages 455-475

  Potter, Tec ^a   Cebon, D ^b   Cole, D J ^b,c  

^a UNIVERSITY OF WARWICK   (United Kingdom)

^b UNIVERSITY OF CAMBRIDGE   (United Kingdom)

^c UNIVERSITY OF NOTTINGHAM   (United Kingdom)

Author keywords

Assessment; Heavy vehicles; Lorries; Road damage; Suspensions

Indexed keywords

AUTOMOBILE PARTS AND EQUIPMENT; AUTOMOBILE SUSPENSIONS; AUTOMOBILES; COMPUTER SIMULATION; INSPECTION; MAINTENANCE; MATHEMATICAL MODELS; PARAMETER ESTIMATION; ROADS AND STREETS;

HEAVY VEHICLES; LORRIES; ROAD DAMAGE;

AUTOMOBILE TESTING;

EID: 0031358079     PISSN: 09544070     EISSN: None     Source Type: Journal    
DOI: 10.1243/0954407971526588     Document Type: Article

References (66)

1. Nevvland, D. E. and Cebon, D. Roads to ruin. New Scientist, 15 December 1990.
2. The allocation of road track costs 1991/92. 1991 (Department of Transport).
3. Von Becker, P. Commercial vehicle design-road stress: effect on transport policy decisions. Sirasse und Autobahn (translated byTRRLasWP/V&ED/87/28), 1985,12,493-498.
4. Council Directive 92/7/EEC, 1992 (The Council of the European Communities)
5. Wilding, T. The long and short of our weighty laws. Roadway, March 1990, 25-29.
6. Morris, J. R. Effects of heavy vehicle characteristics on pavement response-phase 1. Transport Research Board, prepared for NCHRP project 1-25, 1987.
7. Magnusson, G., Carlsson, II. E. and Ohlsson, E. 'The influence of heavy vehicles' springing characteristics and tyre equipment on the deterioration of the road.' VTI (translated by TRRLasWP/V&ED/86/16, 1986), report number 270, 1984.
8. Cebon, D. Interaction between heavy vehicles and roads. SAE SP-951, paper 930001, 1993.
9. Eisenmann, J., Birman, D. and Ililmer, A. Effects of commercial vehicle design on road stress-research results relating to the roads. Strosse und Autobahn (translated by TRRL as WP/V&ED/87/29), 1987,37(6), 238-244.
10. Monismith, C. L., Lysmcr, J., Sousa, J. and Hedrick, J. K. Truck pavement interactions-requisite research. SAE Conference on Vehicle/Pavement Interaction, Indianapolis, 1988, Trans. SAE, SP765 (Society of Automotive Engineers).
11. Svvealman, P. F. A study of dynamic wheel forces in axle group suspensions of heavy vehicles. Australian Road Research Board, Special Report SR27, 1983.
12. Mitchell, C. An experimental assessment of steel, rubber and air suspensions for heavy goods vehicles. IMechE Seminar on Road Wear: The Interaction between Vehicle Suspensions and the Road, London, 24 April 1991, S970.
13. Woodrooffe, J. H. F. and Le Blanc, P. A. Heavy vehicle suspension variations affecting road life. Proceedings of ARRB/FORS Symposium on Heavy Vehicle Suspension Characteristics, Canberra, Australia, 1987.
14. Cole, D. J., Collop, A. C., Potter, T. E. C. and Cebon, D. Spatial repeatability of measured dynamic tyre forces. Proc. Instn Mech. Engrs, Part D, 1996, 210(D3), 185-197.
15. Hahn, W. D. Effects of commercial vehicle design on road stress-quantifying the dynamic wheel loads for stage 3: single axles, stage 4: twin axles, stage 5: triple axles, as a function of the springing and shock absorption system of the vehicle. Institut für Kraftfahrwesen, Universität Hannover (translated by TRRL and WP/V&ED/87/40), 1987, 453.
16. Cole, D. J. and Cebon, D. Spatial repeatability of dynamic tyre forces generated by heavy vehicles. Proc. Instn Mech. Engrs, PartD, 1992, 206(D1), 17-27.
17. Collop, A. C., Cebon, D. and Cole, D. J. Effects of spatial repeatability on long-term flexible pavement performance. Proc. Instn Mech. Engrs, Part C, 1996, 210(C2), 97-110.
18. Collop, A. C., Potter, T. E. C., Cebon, D. and Cole, D. J. Investigation of spatial repeatability using a tire force measuring mat. Transportation Research Record, 1994, 1448, 1-7.
19. Sweatman, P. F. Suspension research and its implementation. ARRB/FORS Symposium on Heavy Vehicle Suspension Characteristics, Canberra, Australia, 1987.
20. Sweatman, P. F., Pearson, R. and Duncan, W. Heavy vehicle suspension characteristics: the need for a design rule. Australian Road Research Board, Internal Report AIR 264-4, 1986.
21. Berry, J. Pmposal for a Council Directive, COM(90) 486, Commission of the European Communities, Brussels, 1990.
22. de Pont, J. Using servo-hydraulics to assess heavy vehicle suspensions for road wear. 3rd International Symposium on Heavy Vehicle Weights and Dimensions, Cambridge, UK, 1992.
23. de Pont, J. Experiences with simulating on-road heavy vehicle suspension behaviour using servo-hydraulics. Engineering Foundation Conference on Vehicle-Road and Vehicle-Bridge Interaction, Noordwijkerhout, 1994, Int. J. Vehicle Des. Heavy Vehicle Systems, 1996,3 (11), 127-139.
24. Woodrooffe, J. H. F., LeBIanc, P. A. and LePiane, K. R. Effects of suspension variations on the dynamic wheel loads of a heavy articulated highway vehicle. Vehicle Weights and Dimensions Study, Vol. 11, 1986 (Canroad Transportation Research Corporation, Canada).
25. Sayers, M. and Gillespie, T. D. Dynamic pavement/wheel loading for trucks with tandem suspensions. Proceedings of 8th IAVSD Symposium on the Dynamics of Vehicles on Roads and Railway Tracks, Cambridge, Massachusetts, 1983 (Swets and Zeitlinger).
26. Whittemore, A. P., Wiley, J. R., Shultz, P. C. and Pollock, D. E. Dynamic pavement loads of heavy highway vehicles. NCHRP, Highway Research Board, Report 105, 1970.
27. Kenis, W. J., Kulakowski, B. T. and Streit, D. A. Heavy vehicle pavement loading-a comprehensive testing program. 3rd International Symposium on Heavy Vehicle Weights and Dimensions, Cambridge, UK, 1992.
28. Christison, J. T. Pavements response to heavy vehicle test program: Part 2-Load equivalency factors, Canroad Transportation Research Corporation, Vol. 9,1986.
29. Hahn, W. D. Effects of commercial vehicle design on road stress-vehicle research results. Institut für Kraftfahrwesen, Universität Hannover (translated by TRRL as WP/V&ED/ 87/38), 1985.
30. Cole, D. J. and Ccbon, D. Simulation and measurement of dynamic tyre forces. Proceedings of 2nd International Symposium on Heavy Vehicle Weights and Dimensions, Kelowna, Canada, 1989.
31. Gyenes, L. and Mitchell, C. G. B. Measuring dynamic loads for heavy vehicle suspensions using a road simulator. 3rd Engineering Foundation Conference on Vehicle-Road and Vehicle-Bridge Interaction, Noordwijkerhout, The Netherlands, 1994.
32. Hu, G. Use of a road simulator for measuring dynamic wheel loads. SAE Conference on Vehicle /Pavement Interaction, Indianapolis, 1988, SP765, SAE paper 881194.
33. Potter, T. E. C., Cebon, D., Collop, A. C. and Cole, D. J. Road damaging potential of measured dynamic tyre forces in mixed traffic. Proc. Instn Mech. Engrs, Part D, 1996, 210(D3), 215-225.
34. Potter, T. E. C., Cebon. D., Cole, D. J. and Collop, A. C. An investigation of road damage due to measured dynamic tyre forces. Proc. Instn Mech. Engrs, PartD, 1995,209(D1), 9-24.
35. Best, A. and Schlesinger, A. Predicting HGV road loads from rig tests with inputs on one axle at a time. Engineering Foundation Conference on Vehicle-Road Interaction, Netherlands, 1994.
36. Potter, T. E. C., Cebon, D. and Cole, D. J. Using parameter estimation to assess road damage. IAVSD 14th Symposium on the Dynamics of Vehicles on Roads and on Tracks, Ann Arbor, Michigan, USA, 1995 (Swets and Zeitlinger).
37. Potter, T. E. C., Cebon, D. and Cole, D. J. Indirect methods for assessing road-friendliness of lorry suspensions. Proc. Instn Mech. Engrs, Part D, 1997, 211(D4), 243-256.
38. Cole, D. J. and Cebon, D. Assessing the road-damaging potential of heavy vehicles. Proc. Instn Mech. Engrs, Part D, 1991,205,223-232.
39. Gyenes, L., Mitchell, C. G. B. and Phillips, S. D. Dynamic pavement loads and tests of road-friendliness for heavy vehicle suspensions. 3rd International Symposium on Heavy Vehicle Weights and Dimensions, Cambridge, UK, 1992.
40. Mitchell, C. G. B. and Gyenes, L. Dynamic pavement loads measured for a variety of truck suspensions. Proceedings of 2nd International Conference on Heavy Vehicle Weights and Dimensions, Kelowna, British Columbia, 1989.
41. Leonard, D. R., Grainger, J. W. and Eyre, R. Loads and vibrations caused by eight commercial vehicles with gross weights exceeding 32 tons. TRRL, Laboratory Report LR582, 1974.
42. Cole, D. J. and Cebon, D. A capacitive strip sensor for measuring dynamic tyre forces. Proceedings of 2nd International Conference on Road Traffic Monitoring, IEE, London, 1989.
43. Potter, T. E. C., Collop, A. C., Cole, D. J. and Cebon, D. A34 Mat tests: results and analysis. Cambridge University Engineering Department, Technical Report CUED/CMECH/TR61, 1994.
44. Le Blanc, P. A. and Woodrooffe, J. H. F. Spatial correlation of dynamic wheel loads. 4th Symposium on Heavy Vehicle Weights and Dimensions, Ann Arbor, Michigan, 1995.
45. Ervin, R. D., et al. Influence of truck size and weight variables on the stability and control properties of heavy trucks. University of Michigan Transportation Research Institute, UMTRI-83-10/2, 1983.
46. Cebon, D. An investigation of the dynamic interaction between wheeled vehicles and road surfaces. PhD Thesis, University of Cambridge, 1985.
47. Gordon, R. G. Influence of vehicle suspensions on pavement costs and performance. Proceedings of ARRB/FORS Symposium on Heavy Vehicle Suspension Characteristics, Canberra, Australia, 1987.
48. Cebon, D. Theoretical road damage due to dynamic tyre forces of heavy vehicles. Part 2: Simulated damage caused by a tandem-axle vehicle. Proc. Instn Mech. Engrs, Part C, 1988, 202(C2), 109-117.
49. Gillespie, T. D., et al. Effects of heavy vehicle characteristics on pavement response and performance. Transportation Research Board, NcHRP Report 353,1993.
50. Eisenmann, J. Dynamic wheel load fluctuations-road stress. Strasse und Autobahn, 1975,4, 127-128.
51. The AASHO Road Test, Report 5, Pavement Research. Highway Research Board, Special Report 6IE, 1962.
52. Walloschek, II. J. Road loading as a function of vehicle characteristics. Proceedings of ARRB/FORS Symposium on Heavy Vehicle Suspension Characteristics, Canberra, Australia, 1987.
53. Kinder, D. F. and Lay, M. G. Review of the fourth power law. Australian Road Research Board, Internal Report AIROOO248, 1988.
54. Collop, A. C., Cebon, D. and Hardy, M. S. A. A visco-elastic approach to rutting in flexible pavements. ASCE J. Transportation Engng, 1995, 121(1), 82-93.
55. Monismith, C. L., Sousa, J. and Lysmcr, J. Modern pavement design technology including dynamic load conditions. SAE Conference on Vehicle /Pavement Interaction, Indianapolis, 1988, Trans. SAE, SP765, paper 881845.
56. O'Connell, S., Abbo, E. and Hedrick, K. Analyses of moving dynamic loads on highway pavements, Part I: vehicle response. Proceedings of International Symposium on Heavy Vehicle It eights and Dimensions, Kelowna, British Columbia, 1986.
57. Hardy, M. S. A. and Cebon, D. Response of continuous pavements to moving dynamic loads. ASCE J. Engng Mechanics, 1993,119(9), 1762-1780.
58. Potter, T. E. C. Assessing the road damaging potential of heavy vehicles. PhD thesis, Cambridge University Engineering Department, 1995.
59. Bcndat, J. S. and Piersol, A. G. Random Data: Analysis and Measurement Procedures, 1971 (John Wiley and Sons).
60. Dodds, C. J. The laboratory simulation of vehicle service stress. Trans. ASME. J. Engng Industry, May 1974, 391-398.
61. Sayers M. and Gillespie, T. D. The effect of suspension system non-linearities on heavy truck vibration. Proceedings of the 7th IAVSD Symposium on the Dynamics of Vehicles on Roads and on Tracks, Cambridge, UK, 1981 (Swets and Zeitlinger).
62. Hald, A. Statistical theory with Engineering Applications, 1952 (John Wiley and Sons, New York).
63. Cole, D. J. and Cebon, D. Truck suspension design to minimize road damage. Proc. Instn Mech. Engrs. Part D, 1996, 210(02), 95-107.
64. Cole, D. J. and Cebon, D. A preliminary investigation of tractor/trailer interaction in articulated vehicles. Cambridge University Engineering Department, Technical Report CUED/C-MECH/TR68,1995.
65. Cole, D. J. and Cebon, D. Influence of tractor-trailer interaction on assessment of road damaging performance. Accepted for publication in Proc. Instn Mech. Engrs, Part D.
66. Taylor, A. Beyond pegs and string. Financial Times, 21 July 1995.