Sputter-deposited low-emissivity coatings on glass

MRS Bulletin

Volumn 22, Issue 9, 1997, Pages 27-35

  Arbab, Mehran ^a,b,c,d  

^a Glass Technology Center   (United States)

^b CASE WESTERN RESERVE UNIVERSITY   (United States)

^c RENSSELAER POLYTECHNIC INSTITUTE   (United States)

^d Materials Research Society   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ATMOSPHERIC TEMPERATURE; DIELECTRIC FILMS; ENERGY ABSORPTION; GLASS; HEAT TRANSFER; LIGHT TRANSMISSION; REFRACTIVE INDEX; SILVER; SOLAR RADIATION; SPUTTER DEPOSITION; THIN FILMS; VACUUM DEPOSITED COATINGS;

INSULATED GLASS UNIT; SILVER BASED LOW EMISSIVITY COATINGS; SPUTTER DEPOSITED LOW EMISSIVITY COATINGS; VACUUM DEPOSITED LOW EMISSIVITY COATINGS;

REFLECTIVE COATINGS;

EID: 0031236625     PISSN: 08837694     EISSN: None     Source Type: Journal    
DOI: 10.1557/S0883769400033972     Document Type: Article

References (35)

1. J. Carmody, S. Selkowitz, and L. Heschong, Residential Windows (W.W. Norton & Company, Inc., New York, 1996); C.G. Granqvist, in Electricity: Efficient End-Use and New Generation Technologies, and their Planning Implications, edited by T.B. Johansson, B. Bodlund, and R.H. Williams (Lund University Press, Lund, Sweden, 1989) p. 89.
2. J. Carmody, S. Selkowitz, and L. Heschong, Residential Windows (W.W. Norton & Company, Inc., New York, 1996); C.G. Granqvist, in Electricity: Efficient End-Use and New Generation Technologies, and their Planning Implications, edited by T.B. Johansson, B. Bodlund, and R.H. Williams (Lund University Press, Lund, Sweden, 1989) p. 89.
3. W.D. Dachselt, W.D. Münz, and M. Schere, Proc. SPIE 324 (1982) p. 37.
4. R.L. Bernardi and S.J. Nadel, ibid. 502 (1984) p. 24.
5. R.P. Howson, Glass Int. 19 (1996) p. 55.
6. P.H. Berning, Appl. Opt. 22 (1983) p. 4127.
7. Ashrae Handbook fundamentals (Am. Soc. Heating, Refrigerating and Air-Conditioning Engineers, Atlanta, 1985) ch. 27, p. 1.
8. Thermal performance parameters for the insulated glass units were calculated with Windows 4.0 software package, Energy and Environment Division, Lawrence Berkeley Laboratory, Berkeley, CA, USA, 1992.
9. J.P. Holman, Heat Transfer (McGraw-Hill, New York, 1976).
10. ASTM/E 1585-93 (Am. Soc. Test. Mater., Philadelphia, 1993) p. 1.
11. For example, see J.H. Apfel and M. Gelber, U.S. Patent No. 3,682,528 (1972); F.H. Gillery, U.S. Patent No. 4,017,661 (1977); L. Chang, U.S. Patent No. 4,179,181 (1979); J.C.C. Fan, U.S. Patent No. 4,337,990 (1982); F.H. Gillery, R.C. Criss, J. Finley, U.S. Patent No. 4,716,086 (1987).
12. For example, see J.H. Apfel and M. Gelber, U.S. Patent No. 3,682,528 (1972); F.H. Gillery, U.S. Patent No. 4,017,661 (1977); L. Chang, U.S. Patent No. 4,179,181 (1979); J.C.C. Fan, U.S. Patent No. 4,337,990 (1982); F.H. Gillery, R.C. Criss, J. Finley, U.S. Patent No. 4,716,086 (1987).
13. For example, see J.H. Apfel and M. Gelber, U.S. Patent No. 3,682,528 (1972); F.H. Gillery, U.S. Patent No. 4,017,661 (1977); L. Chang, U.S. Patent No. 4,179,181 (1979); J.C.C. Fan, U.S. Patent No. 4,337,990 (1982); F.H. Gillery, R.C. Criss, J. Finley, U.S. Patent No. 4,716,086 (1987).
14. For example, see J.H. Apfel and M. Gelber, U.S. Patent No. 3,682,528 (1972); F.H. Gillery, U.S. Patent No. 4,017,661 (1977); L. Chang, U.S. Patent No. 4,179,181 (1979); J.C.C. Fan, U.S. Patent No. 4,337,990 (1982); F.H. Gillery, R.C. Criss, J. Finley, U.S. Patent No. 4,716,086 (1987).
15. For example, see J.H. Apfel and M. Gelber, U.S. Patent No. 3,682,528 (1972); F.H. Gillery, U.S. Patent No. 4,017,661 (1977); L. Chang, U.S. Patent No. 4,179,181 (1979); J.C.C. Fan, U.S. Patent No. 4,337,990 (1982); F.H. Gillery, R.C. Criss, J. Finley, U.S. Patent No. 4,716,086 (1987).
16. J.J. Finley, J. Vac. Sci. Technol. A 14 (1996) p. 739.
17. J. Szczyrbowski, A. Dietrich, and K. Hartig, Sol. Energy Mater. 19 (1989) p. 43.
18. 65). For a discussion of color and color measurement, see F.W. Billmeyer, Jr. and M. Saltzman, Principles of Color Technology, 2nd ed. (John Wiley & Sons, New York, 1981).
19. For a discussion of thin-film optics, see O.S. Heavens, Optical Properties of Thin Solid Films (Dover Publications, Mineola, NJ, 1991) p. 46.
20. Pending U.S. Patent.
21. J.L. Vossen and W. Kern, Thin Film Processes II (Academic Press, San Diego, 1991) p. 177.
22. J.A. Dobrowolski, in Handbook of Optics, vol. I, 2nd ed., ch. 42, edited by M. Bass, E.W. Van Stryland, D.R. Williams and W.L. Wolfe (McGraw-Hill, New York, 1995).
23. A.G. Dirks, J.J. Van Den Broek, and P.E. Wierenga, J. Appl. Phys. 55 (1984) p. 4248.
24. J.J. Van Den Broek, A.G. Dirks, and P.E. Wierenga, Thin Solid Films 130 (1985) p. 95.
25. M. Ohring, The Materials Science of Thin Films (Academic Press, San Diego, 1992).
26. M. Arbab, J. PPG Technol. 3 (1997) p. 29.
27. G. Beister, S. Beisswenger, G. Bräuer, E. Dietrich, R. Kukla, J. Szczyrbowski, and G. Teschner, Glastech. Ber. 66 (1993) p. 175.
28. L. Herlitze, R. Blessing, A. Gombert, W. Graf, and M. Köhl, Proc. SPIE 2255 (1994) p. 525.
29. F.H. Gillery, U.S. Patent No. 4,610,771 (1986); Ibid., U.S. Patent No. 5,178,966 (1993).
30. F.H. Gillery, U.S. Patent No. 4,610,771 (1986); Ibid., U.S. Patent No. 5,178,966 (1993).
31. M. Miyazaki and E. Ando, J. Non-Cryst. Solids 178 (1994) p. 245.
32. R.C. Ross, R. Sherman, and R.A. Bunger, Sol. Energy Mater. 19 (1989) p. 55.
33. A.A. Schmidt, J Offermann, and R. Anton, Thin Solid Films 105 (1996) p. 281.
34. D.R. Hollars, U.S. Patent No. 4,421,622 (1983).
35. ASTM/E 891-87(Am. Soc. Test. Mater., Philadelphia, reapproved 1992) p. 462.