Stability problems analysed by finite element and boundary element techniques - A bibliography (1994-1996)

Finite Elements in Analysis and Design

Volumn 26, Issue 4, 1997, Pages 337-353

  Mackerle, Jaroslav ^a  

^a LINKÖPING INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

BIBLIOGRAPHIES; BOUNDARY ELEMENT METHOD; FINITE ELEMENT METHOD; PROBLEM SOLVING;

STABILITY PROBLEMS;

CONVERGENCE OF NUMERICAL METHODS;

EID: 0031209855     PISSN: 0168874X     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0168-874X(96)00089-3     Document Type: Article

References (386)

1. F.E. Baginski, "Computation of one-parameter families of bifurcating elastic surfaces", SIAM J. Appl. Math. 54 (3), pp. 738-773, 1994.
2. E.J. Barbero et al., "Finite elements for three-mode interaction in buckling analysis", Int. J. Numer. Methods Eng. 39 (3), pp. 469-488, 1996.
3. E.M. Batista and R.C. Batista, "Local-global buckling interaction - some recent research results", Thin-Wall. Struct. 19 (2/4), pp. 269-283, 1994.
4. C.N. Chen, "Plastic buckling analysis by the continuum finite element modeling", Comput. Struct. 57 (3), pp. 513-526, 1995.
5. L.W. Chen and D. M. Ku, "Stability of nonconservatively elastic systems using eigenvalue sensitivity", J. Vib. Acoust. ASME 116 (2), pp. 168-172, 1994.
6. C. Cho et al., "Buckling and postbuckling analysis using an assumed strain element with six DOF per node", 36th Str., Str. Dyn. Mater. Conf., New Orleans, AIAA, pp. 1637-1644, 1995.
7. A. Cimetiere and A. Leger, "Some problems about elastic-plastic post-buckling", Int. J. Solids Struct. 33 (10), pp. 1519-1533, 1996.
8. B. Cochelin, "A path-following technique via an asymptotic-numerical method", Comput. Struct. 53 (5), pp. 1181-1192, 1994.
9. B. Cochelin et al., "Asymptotic-numerical methods and Fade approximants for non-linear elastic structures", Int. J. Numer. Methods Eng. 37 (7), pp. 1187-1213, 1994.
10. A.M. Gasparini et al., "On the stability and instability regions on non-conservative continuous system under partially follower forces", Comp. Meth. Appl. Mech. Eng. 124 (1/2), pp. 63-78, 1995.
11. L.A. Godoy et al., "Finite elements for post-buckling analysis. I - The W-formulation", Comput. Struct. 56 (6), pp. 1009-1017, 1995.
12. Y. Goto et al., "Localization of plastic buckling patterns under cyclic loading", J. Eng. Mech., ASCE 121 (4), pp. 493-501, 1995.
13. B.Z. Huang and S. N. Atluri, "A simple method to follow post-buckling paths in finite element analysis", Comput. Struct. 57 (3), pp. 477-489, 1995.
14. J. Jonsson et al., "Recursive substructuring of finite elements", Comput. Struct. 54 (3), pp. 395-404, 1995.
15. J.S. Koo and B. M. Kwak, "Post-buckling analysis with frictional contacts combining complementarity relations and an arc-length method", Int. J. Numer. Methods. Eng. 39 (7), pp. 1161-1180, 1996.
16. R. Kouhia and C. M. Menken, "On the solution of second-order post-buckling fields", Commun. Numer Methods Eng. 11 (5), pp. 443-453, 1995.
17. S. Krenk and O. Hededal, "Orthogonal residual solution procedures", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. J14-1, 1994.
18. C.S. Krishnamoorthy et al., "Post-buckling analysis of structures by three-parameter constrained solution techniques", Finite Elem. Anal. Des. 22 (2), pp. 109-142, 1996.
19. K.A. Lazopoulos, "Location of bifurcation points and branching analysis in generalized coordinates", 2nd Int. Conf. Comp. Str. Technol., Part 1, Athens, pp. 41-44, 1994.
20. C.M. Menken et al., "Computing and experimenting in buckling", 2nd Int. Conf. Comp. Str. Technol., Part 1, Athens, pp. 69-75, 1994.
21. C. Miehe and J. Schroder, "Post-critical discontinuous localization analysis of small-strain softening elastoplastic solids", Arch. Appl. Mech. 64 (4), pp. 267-285, 1994.
22. C. Miehe et al., "Associative multiplicative elasto-plasticity: formulation and aspects of the numerical implementation including stability analysis", Comput. Struct. 52 (5), pp. 969-978, 1994.
23. M.A. Mikulinsky and D.S. Livshits, "Pre-and postbuckling behavior of mechanical structures in terms of phase transitions", Int. J. Eng. Sci. 33 (13), pp. 1987-2000, 1995.
24. H. Noguchi and T. Hisada, "Development of a new branch-switching algorithm in nonlinear FEM using scaled corrector", JSME Int. J., Ser A 37 (3), pp. 255-263, 1994.
25. H. Noguchi and T. Hisada, "Development of a sensitivity analysis method for nonlinear buckling load", JSME Int. J., Ser A 38 (3), pp. 311-317, 1995.
26. A.C. Nogueira and J.L. Tassoulas, "Buckle propagation - steady-state finite element analysis", J. Eng. Mech., ASCE 120 (9), pp. 1931-1944, 1994.
27. A.C. Nogueira and J. L. Tassoulas, "Steady-state analysis of buckle propagation", Struct. Congr. XII, Atlanta, ASCE, pp. 1514-1519, 1994.
28. E. Onate, "On the derivation and possibilities of the secant stiffness matrix for non linear finite element analysis", Comp. Mech. 15 (6), pp. 572-593, 1995.
29. E. Onate and W.T. Matias, "A critical displacement approach for predicting structural instability", Comp. Meth. Appl. Mech. Eng. 134 (1/2), pp. 135-161, 1996.
30. S. Reese and P. Wriggers, "A finite element method for stability problems in finite elasticity", Int. J. Numer. Methods Eng. 38 (7), pp. 1171-1200, 1995.
31. O. Roth and J. Ravinger, "Nonlinear interactive buckling solved by FEM", 2nd Int. Conf. Comp. Str. Technol., Part 1, Athens, pp. 61-67, 1994.
32. A.B. Sabir, "Elastic buckling, stability and vibration of linear and geometrically non-linear behavior of structures", Energy Sources Tech. Conf. Exh. PD 70, ASME, pp. 175-181, 1995.
33. H.L. Schreyer and M. K. Neilsen, "Analytical and numerical tests for loss of material stability", Int. J. Numer. Method. Eng. 39 (10), pp. 1721-1736, 1996.
34. J. Shi, "Computing critical points and secondary paths in nonlinear structural stability analysis by the finite element method", Comput. Struct. 58 (1), pp. 203-220, 1996.
35. J. Shi and M. A. Crisfield, "A semi-direct approach for the computation of singular points", Comput. Struct. 51 (1), pp. 107-115, 1994.
36. J. Soderkvist, "Quasi buckling generated by transverse loads", 10th Conf. Eng. Mech., Boulder, ASCE, pp. 581-584, 1995.
37. E. Stein et al., "Instability phenomena in plasticity: modelling and computation", Comp. Mech. 17 (1/2), pp. 74-87, 1995.
38. D.B. Stephen and G.P. Steven, "Improved finite element predictions of buckling loads of two dimensional structures", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. J13-1, 1994.
39. S.M. Sun and M.C. Natori, "Numerical solution of large deformation problems involving stability and unilateral constraints", Comput. Struct. 58 (6), pp. 1245-60, 1996.
40. Y. Tomita, "Simulations of plastic instabilities in solid mechanics", Appl. Mech. Rev. 47 (6), pp. 171-205, 1994.
41. N. Triantafyllidis and P. Massin, "Stability of equilibrium states and loading paths in elasto-plastic solids", Joint ASME Appl. Mech. Mater. Meet. AMD 200, ASME, p. 91, 1995.
42. P. Tugcu, "Finite element analysis of thermomechanical coupling in tensile instability", Int. J. Eng. Sci. 32 (6), pp. 1017-1027, 1994.
43. W. Wagner, "A note on FEM buckling analysis", Commun. Numer. Methods Eng. 11 (2), pp. 149-158, 1995.
44. D.Y. Xue et al., "Integrated transient thermalstructural and stability analyses of thermally loaded structures", 35th Str., Str. Dyn. Mater. Conf., AIAA, pp. 22072216, 1994.
45. T. Yeo and J. R. Barber, "Finite element analysis of thermoelastic contact stability", J. Appl. Mech., ASME 61 (4), pp. 919922, 1994.
46. T. Yeo and J. R. Barber, "Finite element analysis of the stability of static thermoelastic contact", J. Therm. Struct. 19 (2), pp. 169184, 1996.
47. J. Zhang and B. Ellingwood, "Effects of uncertain material properties of structural stability", J. Struct. Eng., ASCE 121 (4), pp. 705-716, 1995.
48. M.Z. Ahmed and D.A. DaDeppo, "Stress distribution and buckling stress of plates including edge contact-frictional force effects", Int. J. Solids Struct. 31 (14), pp. 1967-1979, 1994.
49. F.G.A. Al-Bermani et al., "Stability of cold-formed members", Eng. Struct. 16 (5), pp. 386-392, 1994.
50. S. Ammar et al., "Exact stability model of space frames", Comput. Struct. 60 (1), pp. 59-71, 1996.
51. T. Aoki et al., "Stability analysis of inclined wellbores in saturated anisotropic shales", in: H. J. Siriwardane (ed.) Comp. Meth. Adv. Geomech., Balkema, pp. 2025-2030, 1994.
52. A. Asaoka et al., "Stability analysis of reinforced soil structures using rigid plastic finite element method", Soils Found. 34 (1), pp. 107-118, 1994.
53. A. Asaoka et al., "Rigid plastic finite element computation of the stability of reinforced soils", in: H.J. Siriwardane (ed.) Comp. Meth. Adv. Geomech., Balkema, pp. 1319-1324, 1994.
54. P.R. Barrett and H. Boggs, "Automated 3-D analysis of gravity dam stability", Int. Conf. Hydropower, Vol. 3, San Francisco, ASCE, pp. 2157-2166, 1995.
55. D. Beg, "Numerical analysis of lateral buckling of closed thin-walled beams", ZAMM 74 (4), pp. T217-19, 1994.
56. M.N. Bismarck-Nasr, "Buckling analysis of cylindrically curved panels based on a two-field variables variational principle", Comput. Struct. 51 (4), pp. 453-457, 1994.
57. M.N. Bismarck-Nasr, "Dynamic stability of shallow shells subjected to follower forces", AIAA J. 33 (2), pp. 355-360, 1995.
58. J.L. Bitner and D.W. Rutherford, "Stability of pipe supports utilizing U-bolts", 1994 Press. Vess. Piping Conf. PVP 282, ASME, pp. 23-34, 1994.
59. J. Blachut and G.D. Galletly, "Buckling strength of imperfect steel hemispheres", Thin-Wall. Struct. 23 (1/4), pp. 1-20, 1995.
60. G.E. Blandford, "Stability analysis of flexibly connected thin-walled space frames", Comput. Struct. 53 (4), pp. 839-847, 1994.
61. J.C. Boot and A.J. Welch, "Creep buckling of thin-walled polymeric pipe linings subject to external groundwater pressure", Thin-Wall. Struct. 24 (3), pp. 191-210, 1996.
62. C. Borri et al., "Structural analysis and rehabilitation of reinforced concrete shells", ACI Struct. J. 92 (2), pp. 139-148, 1995.
63. M.A. Bradford, "Elastic distortional buckling of overhanging beams", Struct. Eng. Mech. 4 (1), pp. 37-47, 1996.
64. M.A. Bradford and A. Wee, "Analysis of buckling on beams on seat supports", J. Constr. Steel Res. 28 (3), pp. 227-242, 1994.
65. D.N. Brent and M.C. Lou, "Thermal and mechanical stability of the WF/PC II optical alignment", 35th Str., Str. Dyn. Mater. Conf., AIAA, pp. 566-571, 1994.
66. A. Cetintas, "Experimental assessment of borehole plug stability", Ph.D. Thesis, The Univ. of Arizona, 1994.
67. J.C. Chai et al., "Stability analysis of embankment on soft ground (a case study)", Soils Found. 34 (2), pp. 107-114, 1994.
68. S. Chandramouli et al., "Stability response of flexibly connected cold-formed steel space frames", Thin-Wall. Struct. 18 (4), pp. 333-346, 1994.
69. C.N. Chen, "Study on bifurcation and limit point buckling of elastic-plastic arches using the finite element method", Proc. Int. Conf. Offshore Mech. Arctic Eng. OMAE 3, ASME, pp. 297-304, 1995.
70. C.N. Chen, "A finite element study on bifurcation and limit point buckling of elastic-plastic arches", Comput. Struct. 60 (2), pp. 189-196, 1996.
71. C.N. Chen, "A finite element study on Shanley's plastic buckling theory of short columns", Comput. Struct. 59 (5), pp. 975-982, 1996.
72. G. Chen and N.S. Trahair, "Inelastic torsional buckling strengths of cruciform columns", Eng. Struct. 16 (2), pp. 83-90, 1994.
73. W. Chen et al., "Buckling analysis of ring-stiffened cylindrical shells with cutouts by mixed method of finite strip and finite element", Comput. Struct. 53 (4), pp. 811-816, 1994.
74. J.J.R. Cheng et al., "Elastic buckling strength of Gusset plate connections", J. Struct. Eng., ASCE 120 (2), pp. 538-559, 1994.
75. Y. Chiba et al., "Reduced stiffness analysis of thin shells of revolution", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. J5-5, 1994.
76. Y.J. Chiou and S.Y. Chi, "Study on buckling of offshore pipelines", J. Offshore Mech. Arctic Eng., ASME 118 (1), pp. 62-70, 1996.
77. C. Dai et al., "Cosserat blocky model for simulation of slope stability", in: Comp. Meth. Adv. Geomech., H.J. Siriwardane (ed.), Balkema, pp. 2453-2458, 1994.
78. A.M. De Leonardis, "A numerical method to determine the collapse load for masonry arches", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. J12-3, 1994.
79. P.J. Deolasi and P.K. Datta, "Parametric instability characteristics of rectangular plates subjected to localized edge loading (compression or tension)" Comput. Struct. 54 (1), pp. 73-82, 1995.
80. Y. Ding and J. Hou, "General buckling analysis of sandwich constructions", Comput. Struct. 55 (3), pp. 485-493, 1995.
81. M.B. Dusseault, "Analysis of borehole stability", in: H.J. Siriwardane, (ed.) Comp. Meth. Adv. Geomech., Balkema, pp. 125-137, 1994.
82. M. Eisenberger and R. Cohen, "Flexural-torsional buckling of variable and open cross-section members", J. Eng. Mech., ASCE 121 (2), pp. 244-254, 1995.
83. H.S. Essa and D.J. L. Kennedy, "Station square revisited: distortional buckling collapse", Canad. J. Civil Eng. 21 (3), pp. 377-381, 1994.
84. K.H. Frank and T.A. Helwig, "Buckling of webs in unsymmetric plate girders", Engng. J. 32 (2), pp. 43-53, 1995.
85. G.D. Galletly and J. Blachut, "Stability of complete circular and non-circular toroidal shells", Proc. Inst. Mech. Eng., Part C 209 (4), pp. 245-255, 1995.
86. A.S. Gendy and A.F. Saleeb, "Generalized mixed finite element model for pre-and post-quasistatic buckling response of thin-walled framed structures", Int. J. Numer Methods Eng. 37 (2), pp. 297-322, 1994.
87. A.S. Gendy and A.F. Saleeb, "Consistent mixed model for stability of stiffened panels with cut-outs", Comput. Struct. 54 (1), pp. 119-130, 1995.
88. A.T.C. Goh, "Estimating Basal-Heave stability for braced excavations in soft clay", J. Geotech. Eng. ASCE 120 (8), pp. 1430-1436, 1994.
89. W. Guggenberger, "Collapse design of large steel digester tanks", Thin-Wall. Struct. 20 (1/4), pp. 109-128, 1994.
90. W. Guggenberger, "Buckling and postbuckling of imperfect cylindrical shells under external pressure", Thin-Wall. Struct. 23 (1/4), pp. 351-366, 1995.
91. B. Gunnink et al., "Finite element approach to the buckling behavior of helical soil piers", 10th Conf. Eng. Mech., Boulder, ASCE, pp. 365-368, 1995.
92. G.D. Hahn et al., "Buckle propagation and arresting in offshore pipelines", Thin-Wall. Struct. 18 (3), pp. 247-260, 1994.
93. M. Hayashi and C. Watanabe, "Buckling analysis of thin-walled structures by finite node-strip method", Proc. Jpn. Soc. Civil Eng. 525 (1-33), pp. 17-26, 1995.
94. G. Heisig, "Postbuckling analysis of drillstrings using the finite element method", Energy-Source Tech. Conf. Exhib. PD 65, ASME, pp. 91-98, 1995.
95. J. Hematian, "Stability of roadways and intersections", Ph.D. Thesis, Univ. of Wollongong, Australia, 1994.
96. T.K. Huang, "Stability analysis of an earth dam under steady state seepage", Comput. Struct. 58 (6), pp. 1075-1082, 1996.
97. K. Ioki et al., "Study on the buckling behavior of a bellows-type vacuum vessel with torus shape in a reversed field pinch device", Fusion Eng. Des. 30 (3), pp. 245-252, 1995.
98. U. Jappelt and H. Rothert, "Stability analysis of stiffened plates and shells", IASS-ASCE Int. Symp. Spat. Latt. Tens. Str., Atlanta, pp. 917-926, 1994.
99. G. Jelenic and M. Saje, "Finite deformations of linear elastic space beams", ZAMM 74 (4), pp. T298-00, 1994.
100. G. Jelenic and M. Saje, "A kinematically exact space finite strain beam model-finite element formulation by generalized virtual work principle", Comp. Meth. Appl. Mech. Eng. 120 (1/2), pp. 131-161, 1995.
101. J. Jonsson et al., "Semi-loof element for plate instability", Commun. Num. Meth. Eng. 10 (1), pp. 11-19, 1994.
102. H.M. Jung et al., "Study on buckling characteristics of single-layer latticed domes with the initial geometrical imperfection", IASS-ASCE Int. Symp. Spat. Latt. Tens. Str., Atlanta, pp. 488-497, 1994.
103. D.L. Karabalis, "Simplified analysis of general instability of stiffened shells with cutouts in pure bending", AIAA J. 32 (10), pp. 2128-30, 1994.
104. S.A. Karamanos and J.L. Tassoulas, "Stability of ring-stiffened tubular members under external pressure", J. Press. Vess. Tech., ASME 117 (2), pp. 150-155, 1995.
105. S.A. Karamanos and J.L. Tassoulas, "Stability of stiffened tubular members", 13th Struct. Cong., Boston, ASCE, pp. 1379-82, 1995.
106. S.A. Karamanos and J.L. Tassoulas, "Tubular members - Part I: Stability analysis and preliminary results", J. Eng. Mech., ASCE 122 (1), pp. 64-71, 1996.
107. S.A. Karamanos and J. L. Tassoulas, "Tubular members - Part II: Local buckling and experimental verification", J. Eng. Mech., ASCE 122 (1), pp. 72-78, 1996.
108. J.K. Kim and J.K. Yang, "Buckling behavior of slender high-strength concrete columns", Eng. Struct. 17 (1), pp. 39-51, 1995.
109. M.C. Kim et al., "Inelastic buckling of tapered members with accumulated strain", Struct. Eng. Mech. 3 (6), pp. 611-622, 1995.
110. M.Y. Kim et al., "Spatial stability and free vibration of shear flexible thin-walled elastic beams. II: Numerical approach", Int. J. Numer. Methods Eng. 37 (23), pp. 4117-4140, 1994.
111. M.Y. Kim et al., "Spatial stability analysis of thin-walled space frames", Int. J. Numer. Methods. Eng. 39 (3), pp. 499-525, 1996.
112. C. Klohn, "Anmerkungen zu FE-Stabelementen zur Behandlung von Stabilitatsproblemen", ZAMM 75, pp. S87-88, 1995.
113. K. Kokubo et al., "Analysis of shear buckling of cylindrical shells (3rd Rep, Postbuckling behaviors)", Trans. Jpn. Soc. Mech. Eng., Ser A 61 (583), pp. 632-637, 1995.
114. J.B. Kosmatka, "An improved two-node finite element for stability and natural frequencies of axial-loaded Timoshenko beams", Comput. Struct. 57 (1), pp. 141-149, 1995.
115. H. Koyama et al., "Stability analysis for design of CAES caverns and cases of application", in: H.J. Siriwardane (ed.) Comp. Meth. Adv. Geomech., Balkema, pp. 2597-602, 1994.
116. M. Krawczuk and W.M. Ostachowicz, "Bar finite element for vibration and buckling analysis of cracked truss constructions", J. Theor. Appl. Mech. 32 (2), pp. 447-462, 1994.
117. M. Langthjem, "Finite element analysis and optimization of a fluid-conveying pipe", Mech. Struct. Mach. 23 (3), pp. 343-376, 1995.
118. A.D. Lanzo et al., "Asymptotic post-buckling analysis of rectangular plates by HC finite elements", Int. J. Numer. Methods Eng. 38 (14), pp. 2325-2345, 1995.
119. H. Lee et al., "Finite element analysis of lateral buckling for beam structures", Comput. Struct. 53 (6), pp. 1357-1371, 1994.
120. S.C. Lee et al., "Shear buckling coefficients of plate girder web panels", Comput. Struct. 59 (5), pp. 789-795, 1996.
121. K.M. Liew and C.M. Wang, "Elastic buckling of regular polygonal plates", Thin-Wall. Struct. 21 (2), pp. 163-173, 1995.
122. G. Lin, "Stability of multistory building frames with soil interaction", 10th Conf. Eng. Mech., Boulder, ASCE, pp. 1342-1345, 1995.
123. G. Lin, "Buckling of underground pipes with soil interaction", 10th Conf. Eng. Mech., Boulder, ASCE, pp. 357-360, 1995.
124. M.C. Lin and M.K. Yeh, "Buckling of elastoplastic circular cylindrical shells under axial compression", AIAA J. 32 (11), pp. 2309-2315, 1994.
125. M.C. Lin and M.K. Yeh, "Buckling and postbuckling of spherical shells with apical cutout under ring load", AIAA J. 33 (9), pp. 1728-1733, 1995.
126. Z.M. Lin et al., "Finite element stability analysis of thin walled pultruded structural members", 2nd Int. Conf. Comp. Struct. Tech., Athens, pp. 123-129, 1994.
127. Z.M. Lin et al., "Stability of thin-walled pultruded structural members by the finite element method", Thin-Wall. Struct. 24 (1), pp. 1-18, 1996.
128. M. Liu and X. Chi, "Stability analysis of pillars in consideration of Theological behaviour of rock", J. Wuhan Univ. Tech. 10 (1), pp. 30-35, 1995.
129. E. Livne and R. Milosavljevic, "Analytic sensitivity and approximation of skin buckling constraints in wing-shape synthesis", J. Aircraft 32 (5), pp. 1102-1113, 1995.
130. A.E. Lopez and G.K. Orrison, "Critical buckling loads of triangulated dome structures with pinned connections", in: Numer. Methods Str. Mech., AMD 204, ASME, pp. 61-68, 1995.
131. L.A. Louca and J.E. Harding, "Torsional buckling of ring-stiffeners in cylindrical shells subjected to external pressure", Proc. Inst. Civil Eng. Str. Build. 104 (2), pp. 219-230, 1994.
132. L.A. Louca and J.E. Harding, "Torsional buckling of outstands in longitudinally stiffened panels", Thin-Wall. Struct. 24 (3), pp. 211-229, 1996.
133. M. Lu et al., "Numerical study of the Gjovik ice-hockey cavern", in: H.J. Siriwardane (ed.) Comp. Meth. Adv. Geomech., Balkema, pp. 2609-2614, 1994.
134. N. Madhusudhana et al., "Buckling behaviour of uniformly and non-uniformly pretwisted beams", Comput. Struct. 54 (3), pp. 551-556, 1995.
135. B.E.H. Mahmoud and A.K. Gupta, "Inelastic large displacement behavior and buckling of cooling tower", J. Struct. Eng., ASCE 121 (6), pp. 981-985, 1995.
136. G.N. Mansour and J.L. Tassoulas, "Buckle propagation and arrest in deep-water pipelines", 10th Conf. Eng. Mech., Boulder, ASCE, pp. 667-670, 1995.
137. J. Marcinowski, "Bifurcation points and branching paths in the nonlinear stability analysis of shell structures", J. Theor. Appl. Mech. 32 (3), pp. 637-651, 1994.
138. J. Marcinowski, "Nonlinear stability of shells in uniform temperature fields", J. Theor. Appl. Mech. 33 (1), pp. 27-43, 1995.
139. J. Marcinowski, "Large deformations and instability of shell structures induced by the temperature changes", Arch. Civil Eng. 41 (1), pp. 13-30, 1995.
140. V. Mermertas and H.T. Belek, "Stability of variably thick orthotropic annular plates", Int. J. Mech. Sci. 36 (8), pp. 737-749, 1994.
141. L.P. Mikkelsen, "Elastic-viscoplastic buckling of circular cylindrical shells under axial compression", Europ. J. Mech., A/Solids 14 (6), pp. 901-920, 1995.
142. T. Miyamura et al., "Bifurcation analysis of circular membrane with infinite phase-shifted wrinkling modes", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. J14-6, 1994.
143. I.D. Moore et al., "Buckling strength of flexible cylinders with nonuniform elastic support", Int. J. Solids Struct. 31 (22), pp. 3041-3058, 1994.
144. N.R. Naidu and G.V. Rao, "Stability behaviour of uniform columns on a class of two parameter elastic foundation", Comput. Struct. 57 (3), pp. 551-553, 1995.
145. N.R. Naidu and G.V. Rao, "Free vibration and stability behaviour of uniform beams and columns on nonlinear elastic foundation", Comput. Struct. 58 (6), pp. 1213-1215, 1996.
146. L.S. Nair et al., "Stability of shear deformable rectangular plates using refined finite element model", Comput. Struct. 55 (5), pp. 877-881, 1995.
147. P. Nawrotzki et al., "On kinematic instability phenomena of elasto-plastic shell structures", 2nd Int. Conf. Comp. Str. Technol., Part 1, Athens, pp. 83-97, 1994.
148. P.G. Nikolakopoulos and C.A. Papadopoulos, "Laypunov's stability of nonlinear misaligned journal bearings", J. Gas Turbines Power 117 (3), pp. 576-581, 1995.
149. A.C. Nogueira, "Steady-state finite element analysis of buckle propagation in pipelines", Ph.D. Thesis, University of Texas, Austin, 1994.
150. A.C. Nogueira and J.L. Tassoulas, "Finite element analysis of buckle propagation in pipelines under tension", Int. J. Mech. Sci. 37 (3), pp. 249-259, 1995.
151. M. Ohga et al., "Buckling analysis of thin-walled members with variable thickness", J. Struct. Eng. ASCE 121 (6), pp. 919-924, 1995.
152. J. Okada et al., "Evaluation method for elastic-plastic buckling of cylindrical shells under shear forces", Nucl. Eng. Des. 157 (1/2), pp. 65-79, 1995.
153. V.S. Pillai and F.M. Salgado, "Post-liquefaction stability and deformation analysis of Duncan dam", Canad. Geotech. J. 31 (6), pp. 967-978, 1994.
154. Q.H. Qin, "Postbuckling analysis of thin plates by a hybrid Trefftz finite element method", Comp. Meth. Appl. Mech. Eng. 128 (1/2), pp. 123-136, 1995.
155. B. Qu et al., "Comparison research on lateral stability between stable type suspended bridge and common suspended bridge", 1st Int. Conf. Eng. Comput. Comp. Simul., Changsha, pp. 401-406, 1995.
156. M. Radwanska and Z. Waszczyszyn, "Buckling analysis of a cooling tower shell with measured and theoretically modelled imperfections", Thin-Wall Struct. 23 (1/4), pp. 107-121, 1995.
157. S. Rajasekaran, "Equations for tapered thin-walled beams of generic open section", J. Eng. Mech. ASCE 120 (8), pp. 1607-1629, 1994.
158. S. Rajasekaran, "Instability of tapered thin-walled beams of generic section", J. Eng. Mech. ASCE 120 (8), pp. 1630-1640, 1994.
159. K.K. Raju and G.V. Rao, "Thermal post-buckling of linearly tapered moderately thick isotropic circular plates", Comput. Struct. 58 (3), pp. 655-658, 1996.
160. K.K. Raju and G.V. Rao, "The effect of localized axisymmetric damages on the buckling of circular plates", Comput. Struct. 58 (3), pp. 651-654, 1996.
161. G. Ramesh and C.S. Krishnamoorthy, "Inelastic post-buckling analysis of truss structures by dynamic relaxation method", Int. J. Numer. Methods Eng. 37 (21), pp. 3633-3657, 1994.
162. S.A. Ramu and R. Ganesan, "Response and stability of a stochastic beam-column using stochastic FEM", Comput. Struct. 54 (2), pp. 207-221, 1995.
163. G.V. Rao et al., "Post-buckling of partially supported square plates subjected to thermal loading", Comput. Struct. 53 (2), pp. 469-472, 1994.
164. G.V. Rao et al., "Postbuckling of moderately thick circular plates with edge elastic restraint", J. Eng. Mech. ASCE 120 (10), pp. 2232-2238, 1994.
165. G.V. Rao et al., "Post-buckling behaviour of stepped circular plates under uniform compression", Comput. Struct. 54 (4), pp. 775-777, 1995.
166. R. Reitinger and E. Ramm, "Buckling and imperfection sensitivity in the optimization of shell structures", Thin-Wall. Struct. 23 (1/4), pp. 159-177, 1995.
167. Y. Ren and G. Wang, "Application of stochastic finite element method to strength and stability analysis of earth dams", Acta Mech. Solida Sinica 7 (1), pp. 80-86, 1994.
168. G. Rengarajan et al., "Improved assumed-stress hybrid shell element with drilling degrees of freedom for linear stress, buckling and free vibration analyses", Int. J. Numer. Methods Eng. 38 (11), pp. 1917-1943, 1995.
169. H.R. Ronagh and M. A. Bradford, "Parameters affecting distortional buckling of tapered steel members", J. Struct. Eng. ASCE 120 (11), pp. 3137-3155, 1994.
170. H.R. Ronagh and M.A. Bradford, "Elastic distortional buckling of tapered I - beams", Eng. Struct. 16 (2), pp. 97-110, 1994.
171. H.R. Ronagh and M.A. Bradford, "Some notes on finite element buckling formulations for beams", Comput. Struct. 52 (6), pp. 1119-1126, 1994.
172. H.R. Ronagh and M.A. Bradford, "A rational model for the distortional buckling of tapered members", Comp. Meth. Appl. Mech. Eng. 130 (3/4), pp. 263-277, 1996.
173. C.T.F. Ross, "Vibration and elastic instability of thin-walled conical shells under external pressure", Comput. Struct. 55 (1), pp. 85-94, 1995.
174. C.T.F. Ross, "Plastic collapse of thin-walled ring-stiffened conical shells under uniform external pressure", J. Ship Res. 39 (2), pp. 166-175, 1995.
175. C.T.F. Ross and H. Hamer, "Inelastic buckling of ring-stiffened circular conical shells under external pressure", 2nd Int. Conf. Comp. Str. Tech., Athens, pp. 109-113, 1994.
176. A.B. Sabir and F.Y. Chow, "Elastic buckling of plates with reinforced circular holes by the finite element method", Energy Sources Tech. Conf. Exh. PD 70, ASME, pp. 183-189, 1995.
177. A.B. Sabir and M.S. Djoudi, "Elastic buckling of stiffened plates by the finite element method", Energy Sources Tech. Conf. Exh. PD 70, ASME, pp. 191-198, 1995.
178. J.B. Salies et al., "Experimental and mathematical modeling of helical buckling of tubulars in directional well-bores", SPE Int. Petrol. Conf. Exhib., Veracruz, SPE, pp. 433-443, 1994.
179. J.B. Salies et al., "Experimental and mathematical modeling of helical buckling of pipes in horizontal well-bores", Energy-Source Tech. Conf. Exhib. PD 65, ASME, pp. 79-89, 1995.
180. T.M. Shakerley and C.J. Brown, "Elastic buckling of plates with eccentrically positioned rectangular perforations", Int. J. Mech. Sci. 38 (8/9), pp. 825-838, 1996.
181. P.K. Shaw and J.G. Bomba, "Finite-element analysis of pipeline upheaval buckling", 13th Int. Conf. Offshore Mech. Arctic Eng. OMAE 5, ASME, pp. 291-296, 1994.
182. M. She, "Buckle propagation and arrest in underwater pipelines", Ph.D. Thesis, Vanderbilt Univ., 1994.
183. J. Shi and G.F. Moita, "FE simulation of localized instability in hyperelastic axisymmetric membranes", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. J14-5, 1994.
184. H. Showkati and P. Ansourian, "Influence of primary boundary conditions on the buckling of shallow cylindrical shells", J. Constr. Steel Res. 36 (1), pp. 53-75, 1996.
185. D.N. Singh and P.K. Basudhar, "Stability of a trapdoor", Soils Found. 35 (3), pp. 111-115, 1995.
186. G. Singh et al., "Post-buckling of moderately thick elliptical plates", Comput. Struct. 60 (3), pp. 481-486, 1996.
187. U.K. Singh and D.G. Rao, "Evaluation of shaft pillar stability using numerical modelling methods - a case study", J. Mines Metals Fuels 42 (8/9), pp. 195-205, 1994.
188. S.W. Sloan and A. Assadi, "Undrained stability of a plane strain heading", Canad. Geotech. J. 31 (3), pp. 443-450, 1994.
189. J.P. Smith, "Buckling of shear deformable plates using the p-version of the finite element method", Comput. Struct. 57 (3), pp. 527-532, 1995.
190. A.K.W. So and S.L. Chan, "Stability and strength analysis of glass wall systems stiffened by glass fins", Finite Elem. Anal. Des. 23 (1), pp. 57-75, 1996.
191. H.W. Song and J.L. Tassoulas, "Large deformation buckle analysis of an inelastic ring under external pressure", Comput. Struct. 51 (2), pp. 225-233, 1994.
192. Y. Song et al., "Thermoelastoviscoplastic buckling behavior of cylindrical shells", J. Eng. Mech. ASCE 121 (1), pp. 62-70, 1995.
193. S.E.J. Spierenburg and J.A.M. Teunissen, "Slope stability during overtopping", in: H.J. Siriwardane (ed.) Comp. Meth. Adv. Geomech., Balkema, pp. 2499-3404, 1994.
194. S. Sridharan, "Analysis of stiffened cylindrical shells under interactive buckling", 10th Conf. Eng. Mech., Boulder, ASCE, pp. 509-512, 1995.
195. S. Sridharan et al., "Mode interaction analysis of stiffened shells using locally buckled elements", Int. J. Solids Struct. 31 (17), pp. 2347-2366, 1994.
196. E. Stein et al., "Adaptive finite element analysis of geometrically non-linear plates and shells, especially buckling", Int. J. Numer. Methods Eng. 37 (15), pp. 2631-2655, 1994.
197. C. Sun et al., "Discrete element model for buckling analysis of thin ring confined within rigid boundary", J. Eng. Mech. ASCE 121 (1), pp. 71-79, 1995.
198. J. Sun, "Analysis of the influence of local buckling on globe instability for space truss structures", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. J10-3, 1994.
199. J.L. Tassoulas et al., "Finite element analysis of tube stability in deep water", 2nd Int. Conf. Comp. Str. Technol., Part 1, Athens, pp. 45-60, 1994.
200. J.G. Teng, "Cone-cylinder intersection under internal pressure: nonsymmetric buckling", J. Eng. Mech., ASCE 121 (12), pp. 1298-1305, 1995.
201. S.C. Tillman, "A finite element study of the effects of connector spacing and distribution on the initial buckling stress of a twin-celled box column", Thin-Wall. Struct. 22 (1), pp. 1-8, 1995.
202. Y. Ueda et al., "Effect of local buckling on hysteretic behavior of beam-column with circular cross-section", 4th Int. Offshore Polar Eng. Conf., Osaka, pp. 58-64, 1994.
203. C.L. Wang et al., "The stability of a deviated well-bore in shale rocks", in: H. J. Siriwardane (ed.) Comp. Meth. Adv. Geomech., Balkema, pp. 2195-2200, 1994.
204. X. Wang et al., "Model study of borehole stability", Energy-Sources Tech. Conf. PD 56, ASME, pp. 69-77, 1994.
205. X. Wang et al., "Stability analysis of inclined boreholes including moisture adsorption process", Energy-Sources Tech. Conf. Exhib. PD 65, ASME, pp. 339-346, 1995.
206. Y. Wang and D. Liu, "The research on solving the external pressure stability of the stiffened penstocks by using semi-analytical finite element method (SAFEM)", 1st Int. Conf. Eng. Comput. Comp. Simul., Changsha, pp. 413-419, 1995.
207. M.H. Wallace and H.J. Melosh, "Buckling of a pervasively faulted litosphere", Pure Appl. Geophys. 142 (2), pp. 239-261, 1994.
208. K. Watashi and K. Iwata, "Thermal buckling and progressive ovalization of pipes: experiences at the TTS sodium test facility and their analysis", Nucl. Eng. Des. 153 (2/3), pp. 319-330, 1995.
209. J.C. Wohlever and T.J. Healey, "A group theoretic approach to the global bifurcation analysis of an axially compressed cylindrical shell", Comp. Meth. Appl. Mech. Eng. 122 (3/4), pp. 315-349, 1995.
210. W.C. Xie, "Buckling mode localization in randomly disordered multispan continuous beams", AIAA J. 33 (6), pp. 142-1149, 1995.
211. Y.M. Xie and G.P. Steven, "Improving finite element predictions of buckling of beams and frames", Comput. Struct. 52 (2), pp. 381-385, 1994.
212. S. Yamada and T. Taguchi, "Nonlinear buckling response of single layer latticed barrel vaults", IASS-ASCE Int. Symp. Spat. Latt. Tens. Str. Atlanta, pp. 519-528, 1994.
213. S. Yamada et al., "Reduced stiffness buckling analysis of rigidly jointed single-layer latticed domes", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. J10-1, 1994.
214. C.Y. Yau and S.L. Chan, "Inelastic and stability analysis of flexibly connected steel frames by springs-in-series model", J. Struct. Eng. ASCE 120 (10), pp. 2803-2819, 1994.
215. S. Yoshida, "Buckling of thin cylindrical shells with two-step variable thickness under external pressure", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. J11-4, 1994.
216. T.H. Young and F.Y. Chen, "Stability of skew plates subjected to aerodynamic and in-plane forces", J. Sound Vib. 171 (5), pp. 603-615, 1994.
217. J.W. Zhang and W.B. Kratzig, "Buckling analysis of rectangular plates using a four-noded finite element", Comput. Struct. 50 (1), pp. 79-86, 1994.
218. L. Zhao et al., "Study on the behavior of geometric nonlinear stability under construction of long-span arch bridges by FEM", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. J12-4, 1994.
219. Z. Zhou and D.W. Murray, "An incremental solution technique for unstable equilibrium paths of shell structures", Comput. Struct. 55 (5), pp. 749-759, 1995.
220. Z. Zhou and D.W. Murray, "Analysis of postbuckling behavior of line pipe subjected to combined loads", Int. J. Solids Struct. 32 (20), pp. 3015-3036, 1995.
221. J. Argyris and L. Tenek, "Buckling of multilayered composite plates by natural shear deformation matrix theory", Comp. Meth. Appl. Mech. Eng. 111 (1/2), pp. 37-59, 1994.
222. J. Argyris and L. Tenek, "High-temperature bending, buckling and postbuckling of laminated composite plates using the natural mode method", Comp. Meth. Appl. Mech. Eng. 117 (1/2), pp. 105-142, 1994.
223. J. Argyris and L. Tenek, "Postbuckling of composite laminates under compressive load and temperature", Comp. Meth. Appl. Mech. Eng. 128 (1/2), pp. 49-80, 1995.
224. J.M. Aribert, "Effect of the local plate buckling on the ultimate strength of continuous composite beams", Thin-Wall. Struct. 20 (1/4), pp. 279-300, 1994.
225. V. Balamurugan et al., "Nonlinear dynamic instability of laminated composite plates using finite element method", Comput. Struct. 60 (1), pp. 125-130, 1996.
226. E.J. Barbero et al., "Finite elements for post-buckling analysis. II-Application to composite plate assemblies", Comput. Struct. 56 (6), pp. 1019-1028, 1995.
227. O. Barton and R. Reiss, "Buckling of rectangular symmetric laminated plates determined by eigensensitivity analysis", 35th Str., Str. Dyn. Mater. Conf. AIAA, pp. 2008-2018, 1994.
228. A.M. Baz and T. Chen, "Active control of the lateral buckling of nitinol-reinforced composite beams", Proc. SPIE, 2427, pp. 30-48, 1995.
229. B. Bhushan et al., "Asymmetric buckling of layered orthotropic circular and annular plates of varying thickness using a computationally economic semianalytical FE approach", Comput. Struct. 59 (1), pp. 21-33, 1996.
230. S. Biggers and S. Srinivasan, "Postbuckling response of piece-wise uniform tailored composite plates in compression", J. Reinf. Plast. Compos. 13 (9), pp. 803-821, 1994.
231. S.B. Biggers and S.S. Pageau, "Shear buckling response of tailored composite plates", AIAA J. 32 (5), pp. 1100-1103, 1994.
232. V.O. Britt, "Shear and compression buckling analysis for anisotropic panels with elliptical cutouts", AIAA J. 32 (11), pp. 2293-2299, 1994.
233. R.J. Brooks and G.J. Turvey, "Lateral buckling of pultruded GRP I-section cantilevers", Compos. Struct. 32 (1/4), pp. 203-215, 1995.
234. D. Bruno et al., "Nonlinear analysis of bimodular composite plates", Comp. Mech. 14 (1), pp. 28-37, 1994.
235. E. Carrera and M. Villani, "Large deflections and stability FEM analysis of shear deformable compressed anisotropic flat panels", Compos. Struct. 29 (4), pp. 433-444, 1994.
236. E. Carrera and M. Villani, "Effects of boundary conditions on postbuckling of compressed, symmetrically laminated thick plates", AIAA J. 33 (8), pp. 1543-1546, 1995.
237. C.P. Chaplin and A.N. Palazotto, "The collapse of composite cylindrical panels with various thickness using finite element analysis", Comput. Struct. 60 (5), pp. 797-815, 1996.
238. W.T. Chow and S.N. Atluri, "Prediction of post-buckling strength of stiffened laminated composite panels based on the criterion of mixed-mode stress intensity factors", Comp. Mech. 18 (3), pp. 215-224, 1996.
239. A. Dasgupta and M.H. Chen, "Influence of thickness and lamination sequence on fiber microbuckling strength in thick composites", 8th Tech. Conf. Amer. Soc. Compos., Cleveland, pp. 129-138, 1994.
240. B.D. Davidson and T.M. Krafchak, "A comparison of energy release rates for locally buckled laminates containing symmetrically and asymmetrically located delaminations", J. Compos. Mater. 29 (6), pp. 700-713, 1995.
241. S.B. Dong and P. Etitum, "Three-dimensional stability analysis of laminated anisotropic circular cylinders", Int. J. Solids Struct. 32 (8/9), pp. 1211-1230, 1995.
242. J. Eiblmeier and J. Loughlan, "Buckling response of carbon fibre composite panels with reinforced cutouts", Compos. Struct. 32 (1/4), pp. 97-113, 1995.
243. B.G. Falzon and G.P. Steven, "Postbuckling behaviour of hat-stiffened thin-skinned carbon-fibre composite panels", 36th Str. Dyn. Mater. Conf., New Orleans, AIAA, pp. 2663-2671, 1995.
244. N.A. Fleck and J.Y. Shu, "Microbuckle initiation in fibre composites: a finite element study", J. Mech. Phys. Solids 43 (12), pp. 1887-1918, 1995.
245. B. Folz and R.O. Foschi, "Stochastic stiffness properties and buckling of laminated wood columns", in: G.I. Schueller (ed.) Struct. Safety & Reliab., Balkema, pp. 577-584, 1994.
246. M. Ganapathi et al., "Dynamic instability of laminated composite curved panels using finite element method", Comput. Struct. 53 (2), pp. 335-342, 1994.
247. A.K. Ghosh and S.S. Dey, "Buckling of laminated plates-a simple finite element based on higher-order theory", Finite Elem. Anal. Design 15 (4), pp. 289-302, 1994.
248. M. Goldmanis and A. Riekstinsh, "Post-buckling finite element analysis of composite cylindrical panels in axial compression", Compos. Struct. 29 (4), pp. 457-462, 1994.
249. R. Gopalakrishnan, "Dynamic stability of cylindrical composite shells", Ph.D. Thesis, State Univ. of New York, Stony Brook, 1994.
250. P.K. Gotsis and J.D. Guptill, "Fiber composite thin shells subjected to thermal buckling loads", Comput. Struct. 53 (6), pp. 1263-1274, 1994.
251. R. Guo and A. Chattopadhyay, "Development of a finite element based design sensitivity analysis for buckling and postbuckling of composite plates", 36th Str., Str. Dyn. Mater. Conf., New Orleans, AIAA, pp. 1119-1131, 1995.
252. Z. Guo and H. Chen, "Thermal buckling analysis of laminated composite plates with temperature-dependent material properties", J. Dalian Univ. Tech. 35 (4), pp. 463-467, 1995.
253. H.T. Hu, "Buckling analyses of fiber-composite laminate plates with material nonlinearity", Finite Elem. Anal. Design 19 (3), pp. 169-179, 1995.
254. N. Jaunky et al., "Buckling of arbitrary quadrilateral anisotropic plates", 35th Str., Str. Dyn. Mater. Conf. AIAA, pp. 493-503, 1994.
255. N. Jaunky et al., "Buckling of arbitrary quadrilateral anisotropic plates", AIAA J. 33 (5), pp. 938-944, 1995.
256. T.Y. Kam and K.H. Chu, "Buckling of laminated composite plates subject to nonuniform in-plane edge loads", Energy Sources Tech. Conf. Exh. PD 71, ASME, pp. 207-215, 1995.
257. A. Kasagi, "Interactive buckling of rigid-stiffened composite cylindrical shells", Ph.D. Thesis, Washington Univ., 1994.
258. T.B. Kermanidis and G.N. Labeas, "Static and stability analysis of composite plates by a semi-analytical method", Comput. Struct. 57 (4), pp. 673-679, 1995.
259. G.I. Kim and M.E. Tuttle, "Buckling analysis for a stiffened panel", 35th Str., Str. Dyn. Mater. Conf., AIAA, pp. 1423-1433, 1994.
260. Y. Kim et al., "Delamination buckling of a short orthotropic tube under axial compression", Comput. Struct. 58 (1), pp. 173-182, 1996.
261. Y.H. Kim and A.K. Noor, "Buckling and postbuckling of composite panels with cutouts subjected to combined loads", Finite Elem. Anal. Des. 22 (2), pp. 163-185, 1996.
262. Y.S. Kim and S.V. Hoa, "Bi-axial buckling behavior of composite rectangular plates", Compos. Struct. 31 (4), pp. 247-252, 1995.
263. Z.G. Kim et al., "Postbuckling analysis of stringer-stiffened composite laminated cylindrical panels", J. Reinf. Plast. Compos. 14 (8), pp. 827-846, 1995.
264. J.H. Kweon and C.S. Hong, "An improved arc-length method for postbuckling analysis of composite cylindrical panels", Comput. Struct. 53 (3), pp. 541-549, 1994.
265. J.H. Kweon et al., "Postbuckling compressive strength of graphite/epoxy laminated cylindrical panels loaded in compression", 35th Str., Str. Dyn. Mater. Conf., AIAA, pp. 290-298, 1994.
266. J.H. Kweon et al., "Postbuckling compressive strength of graphite-epoxy laminated cylindrical panels loaded in compression", AIAA J. 33 (2), pp. 217-222, 1995.
267. S. Kyriakides et al., "Instability and failure of fiber composites in compression", Appl. Mech. Rev. 47 (6), pp. S262-68, 1994.
268. J. Lee, "Thermal buckling of laminated composites by a layer-wise theory", 36th Str., Str. Dyn. Mater. Conf., New Orleans , AIAA, pp. 2958-2963, 1995.
269. J. Lee et al., "Buckling and postbuckling of circular plates containing concentric penny-shaped delaminations", Comput. Struct. 56 (6), pp. 1053-1063, 1995.
270. J. Lee et al., "Postbuckling of laminated composites with delaminations", AIAA J. 33 (10), pp. 1963-1970, 1995.
271. J. Lee et al., "Buckling and postbuckling of circular plates containing concentric penny-shaped delaminations", Comput. Struct. 58 (5), pp. 1045-1054, 1996.
272. R.P. Ley et al., "Buckling of imperfect, anisotropic, ring-stiffened cylinders under combined loads", AIAA J. 32 (6), pp. 1302-1309, 1994.
273. C.L. Liao and C.R. Cheng, "Dynamic stability of stiffened laminated composite plates and shells subjected to in-plane pulsating forces", J. Sound Vib. 174 (3), pp. 335-351, 1994.
274. C.L. Liao and C.R. Cheng, "Dynamic stability of stiffened laminated composite plates and shells subjected to in-plane pulsating forces", Int. J. Numer. Methods Eng. 37 (24), pp. 4167-4183, 1994.
275. Y.B. Lim, "Buckling and postbuckling analysis of delaminated beams under compressive loads", Ph.D. Thesis, Univ. of Illinois, Urbana, 1994.
276. I.W. Liu, "An element for static, vibration and buckling analysis of thick laminated plates", Comput. Struct. 59 (6), pp. 1051-1058, 1996.
277. E. Madenci and A. Barut, "Pre-and postbuckling response of curved, thin, composite panels with cutouts under compression", Int. J. Numer. Methods. Eng. 37 (9), pp. 1499-1510, 1994.
278. E. Madenci and A. Barut, "Thermal postbuckling analysis of cylindrically curved composite laminates with a hole", Int. J. Numer. Methods. Eng. 37 (12), pp. 2073-2091, 1994.
279. S. Nagendra et al., "Buckling and failure characteristics of compression-loaded stiffened composite panels with a hole", Compos. Struct. 28 (1), pp. 1-17, 1994.
280. S.L. Nair et al., "Stability of laminated composite plates subjected to various types of in-plane loadings", Int. J. Mech. Sci. 38 (2), pp. 191-202, 1996.
281. K.F. Nilsson and A. Giannakopoulos, "A finite element analysis of configurational stability and finite growth of buckling driven delamination", J. Mech. Phys. Solids 43 (12), pp. 1983-2021, 1995.
282. A.K. Noor, "Finite element buckling and postbuckling analyses", 1994 Int. Mech. Eng. Cong. Expo., AD 41, ASME, pp. 1-37, 1994.
283. A.K. Noor and Y.H. Kim, "Buckling and postbuckling of composite panels with cutouts subjected to combined edge shear and temperature change", Comput. Struct. 60 (2), pp. 203-222, 1996.
284. A.K. Noor and J.M. Peters, "Finite element buckling and postbuckling solutions for multilayered composite panels", Finite Eiern. Anal. Des. 15 (4), pp. 343-367, 1994.
285. A.K. Noor and J.M. Peters, "Nonlinear and postbuckling analyses of curved composite panels subjected to combined temperature change and edge shear", Comput. Struct. 60 (6), pp. 853-874, 1996.
286. T.M. Nordstrand, "Parametric study of the post-buckling strength of structural core sandwich panels", Compos. Struct. 30 (4), pp. 441-451, 1995.
287. B.T. Owen et al., "Buckling analysis of laminated composite beams with multiple delaminations", 35th Str., Str. Dyn. Mater. Conf., AIAA, pp. 1998-2007, 1994.
288. K. Parsa and L. Hollaway, "Stability of polymer/fibre composite continuum/skeletal structural units under in-plane loading", Composites 26 (5), pp. 323-337, 1995.
289. M.J. Pavier and M.P. Clarke, "Specialized composite plate element for problems of delamination buckling and growth", Compos. Struct. 34 (1), pp. 43-53, 1996.
290. A.B. Peabody and J.W. Wekezer, "Buckling strength of wood power poles using finite elements", J. Struct. Eng. ASCE 120 (6), pp. 1893-1908, 1994.
291. M.R. Prabhu and R. Dhanaraj, "Thermal buckling of laminated composite plates", Comput. Struct. 53 (5), pp. 1193-1204, 1994.
292. I.G. Raftoyiannis, "Buckling mode interaction in FRP columns", Ph.D. Thesis, West Virginia Univ., 1994.
293. H.D. Randloff et al., "Buckling of composite plates with trapezoidal planform", 36th Str., Str. Dyn. Mater. Conf., New Orleans, AIAA, pp. 1989-98, 1995.
294. A.R.K. Reddy and R. Palaninathan, "Buckling of laminated skew plates", Thin-Wall. Struct. 22 (4), pp. 241-259, 1995.
295. S.P. Renze and D.H. Laananen, "Buckling behavior of bead-stiffened composite panels", Compos. Sci. Tech. 50 (2), pp. 157-166, 1994.
296. J. Ro and A. Baz, "NITINOL-reinforced plates: Part II-Static and buckling characteristics", Compos. Eng. 5 (1), pp. 77-90, 1995.
297. A. Schokker et al., "Dynamic buckling of composite shells", Comput. Struct. 59 (1), pp. 43-53, 1996.
298. I. Sheinman et al., "High-order element for prebuckling and buckling analysis of laminated plane frames", Int. J. Num. Meth. Eng. 39 (13), pp. 2155-2168, 1996.
299. L.C. Shiau and T.Y. Wu, "Application of the finite element method to postbuckling analysis of laminated plates", AIAA J. 33 (12), pp. 2379-2385, 1995.
300. G. Singh et al., "Thermal postbuckling behavior of laminated composite plates", AIAA J. 32 (6), pp. 1336-1338, 1994.
301. I.C. Skrna-Jakl et al., "Numerical investigations of an imperfect stringer-stiffened composite wing torsion box - an analysis concept", Composites: Part B 27 (1), pp. 59-69, 1996.
302. L. Sobel and D. Sharp, "Comparison of analytical and experimental results for the postbuckling behavior of a stiffened, flat, composite shear panel", 35th Str., Str. Dyn. Mater. Conf., AIAA, pp. 449-457, 1994.
303. K.A. Stevens et al., "Buckling and postbuckling of composite structures", Composites 26 (3), pp. 189-199, 1995.
304. M.A. Stiftinger et al., "Buckling and postbuckling investigations of imperfect curved composite shells, Part B: Computational investigations", Thin-Wall. Struct. 23, pp. 339-350, 1995.
305. P. Sundaresan et al., "Buckling and post-buckling analysis of moderately thick laminated rectangular plates", Comput. Struct. 61 (1), pp. 79-86, 1996.
306. N. Watanabe and K. Teranishi, "Stiffness and buckling analysis for sandwich plates with thermal buckling CFRP face sheets: qualitative approach", 35th Str., Str. Dyn. Mater. Conf., AIAA, pp. 2019-2027, 1994.
307. M.R. Wisnom, "Finite element modeling of shear instability under compression in unidirectional carbon-fiber composites", J. Thermoplast. Compos. Mat. 1 (4), pp. 352-363, 1994.
308. M.R. Wisnom and J. Haberle, "Prediction of buckling and failure of unidirectional carbon fiber-epoxy struts", Compos. Struct. 28 (3), pp. 229-239, 1994.
309. M.K. Yeh and C.M. Tan, "Buckling of eliptically delaminated composite plates", J. Compos. Mater. 28 (1), pp. 36-52, 1994.
310. M.K. Yeh and Y.L. You, "Buckling of laminated plates with adhesive joints", J. Compos. Mater. 29 (12), pp. 1565-1580, 1995.
311. G. Zhang and R.A. Latour, "An analytical and numerical study of fiber microbuckling", Compos. Sci. Tech. 51 (1), pp. 95-109, 1994.
312. Z. W. Zhong et al., "Buckling and postbuckling of shape memory alloy fiber-reinforced composite plates", 1994 Int. Mech. Eng. Cong. Expo. AD 41, ASME, pp. 115-132, 1994.
313. J.F. Zhu and H.P. Yang, "A study of postbuckling strength and failure for laminated composite plate structures", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. K2-3, 1994.
314. J. Ari-Gur and S.R. Simonetta, "Pulse buckling of composite plates", 35th Str., Str. Dyn. Mater. Conf., AIAA, pp. 1039-1047, 1994.
315. V. Balamurugan et al., "Nonlinear dynamic instability of laminated composite plates using finite element method", Comput. Struct. 60 (1), pp. 125-130, 1996.
316. A. Catarig et al., "Nonlinear analysis of static and dynamic stability of metallic chimneys", Thin-Wall. Struct. 20 (1/4), pp. 129-138, 1994.
317. E. Ceretti et al., "Redefining vibration stability by FEM analysis", Werkstatt. Betrieb. 128 (5), pp. 1-4, 1995.
318. L.W. Chen and H.K. Chen, "Whirl speeds and stability of rotating shaft subjected to end loads", AIAA J. 33 (9), pp. 1569-1573, 1995.
319. L.W. Chen and H.K. Chen, "Stability analyses of a cracked shaft subjected to the end load", J. Sound Vib. 188 (4), pp. 497-513, 1995.
320. L. W. Chen and W.K. Peng, "Dynamic stability of rotating blades with geometric non-linearity", J. Sound Vib. 187 (3), pp. 421-433, 1995.
321. W.J. Chen, "Instability treshold and stability boundaries of rotor-bearing systems", Struct. Dyn. Vib., London, PD 64, ASME, pp. 211-218, 1994.
322. E.M. Daya and M. Potier-Ferry, "Vibration and stability modes of long flexible structures", 2nd Int. Conf. Comp. Str. Technol., Part 1, Athens, pp. 171-177, 1994.
323. A.W. Eustes et al., "Selection of slim hole core rods by vibratory analysis", J. Energy Res. Technol., ASME 116 (4), pp. 251-257, 1994.
324. C.R. Farrar et al., "Simplified method for evaluating the seismic buckling capacity of unstiffened steel containment structures", Nucl. Eng. Des. 158 (1), pp. 31-45, 1995.
325. M. Ganapathi and T.K. Varadan, "Dynamic buckling of laminated anisotropic spherical caps", J. Appl. Mech., ASME 62 (1), pp. 13-19, 1995.
326. K. Higuchi, "Experimental model of a flexible free-free column in dynamic instability due to an end thrust", 35th Str., Str. Dyn. Mater. Conf, AIAA, pp. 2402-2408, 1994.
327. Y.Y. Huang et al., "Finite element study on the dynamics and the arrest of the propagating buckle on chater's beam", Comput. Struct. 51 (6), pp. 729-735, 1994.
328. T.M.V. Kaiser et al., "Nonlinear harmonic analysis applied to axisymmetric structures", Comput. Struct. 55 (6), pp. 1107-1118, 1995.
329. H. Katori and T. Nishimura, "Vibration and dynamic stability of anisotropic plates (free vibration and panel flutter)", JSME Int. J., Ser C 37 (1), pp. 28-32, 1994.
330. G. Kawiecki and N.T. Sivaneri, "Bilinear formulation applied to the response and stability of helicopter rotor blade", AIAA J. 32 (10), pp. 2036-2043, 1994.
331. X. Kong et al., "Dynamic snap buckling of an elastoplastic shallow arch with elastically supported and clamped ends", Comput. Struct. 55 (1), pp. 163-166, 1995.
332. J.B. Kosmatka, "Stability and natural frequencies of axial-loaded shear-deformable beams using an improved two-node finite element", 35th Str., Str. Dyn. Mater. Conf., AIAA, pp. 193-201, 1994.
333. D.M. Ku and L.W. Chen, "Stability and whirl speeds of rotating shaft under axial loads", Modal Anal. 9 (2), pp. 111-123, 1994.
334. C.L. Liao and C.R. Cheng, "Dynamic stability of stiffened laminated composite plates and shells subjected to in-plane pulsating forces", J. Sound Vib. 174 (3), pp. 335-351, 1994.
335. C.L. Liao and C.R. Cheng, "Dynamic stability of stiffened laminated composite plates and shells subjected to in-plane pulsating forces", Int. J. Numer. Methods Eng. 37 (24), pp. 4167-4183, 1994.
336. C.L. Liao and B.W. Huang, "Parametric resonance of a spinning pretwisted beam with time-dependent spinning rate", J. Sound Vib. 180 (1), pp. 47-65, 1995.
337. C.L. Liao and B.W. Huang, "Parametric instability of a spinning pretwisted beam under periodic axial force", Int. J. Mech. Sci. 37 (4), pp. 423-439, 1995.
338. K.L. Lim and M.A. Crisfield, "Dynamic finite element analysis applied to a simple model exhibiting dynamic instability", Eng. Comput. 11 (6), pp. 483-494, 1994.
339. L.A. Louca and J.E. Harding, "Buckling behaviour of stiffened panels under static and dynamic loading with particular emphasis on the response of the stiffener outstands", Proc. Int. Conf. Offshore Mech. Arctic Eng. OMAE 1, ASME, pp. 451-465, 1995.
340. N.G. Milne et al., "Finite element analysis of rotor stability in an axial-drive micromotor", J. Micromech. Microeng. 4 (2), pp. 74-83, 1994.
341. T.C.K. Molyneaux and L.Y. Li, "Dynamic elastic instability of long circular cylindrical shells under pure bending", Thin-Wall. Struct. 24 (2), pp. 123-133, 1996.
342. S.L. Nayar et al., "Axisymmetric free vibrations of internally compressed moderately thick annular plates", Comput. Struct. 53 (3), pp. 759-765, 1994.
343. Y. Ooka et al., "Simulative analyses of dynamic buckling of bellows", 1994 Press. Vess. Piping Conf. PVP 279, ASME, pp. 51-57, 1994.
344. Y. Ooka et al., "Simulative analyses of dynamic buckling of bellows", J. Press. Vess. Tech., ASME 118 (2), pp. 129-136, 1996.
345. N.G. Pegg, "Numerical study of dynamic pulse buckling of cylindrical structures", Marine Struct. 7 (2/5), pp. 189-212, 1994.
346. N.G. Pegg, "Effects of impulse duration and combined impulse-hydrostatic pressure on buckling stability of cylindrical structures", J. Ship Res. 38 (2), pp. 164-171, 1994.
347. B. Ren and X. Kuai, "Dynamic stability analysis of frame structures using finite element method", 1st Int. Conf. Eng. Comput. Comp. Simulat., Changsha, pp. 263-267, 1995.
348. B.J. Ryu and Y. Sugiyama, "Dynamic stability of cantilevered Timoshenko columns subjected to a rocket thrust", Comput. Struct. 51 (4), pp. 331-335, 1994.
349. A. Schokker et al., "Dynamic buckling of composite shells", Comput. Struct. 59 (1), pp. 43-53, 1996.
350. M. Stylianou and B. Tabarrok, "Finite element analysis of an axially moving beam, Part 2: Stability analysis", J. Sound Vib. 178 (4), pp. 455-481, 1994.
351. A.G. Taylor and A. Craggs, "A finite element model for a flexible non-symmetric rotor on distributed bearing: a stability study", J. Sound Vib. 173 (1), pp. 1-21, 1994.
352. A.G. Taylor and A. Craggs, "The effect of damping on the stability of a finite element model of a flexible non-axisymmetric rotor on tilting pad bearings", J. Sound Vib. 185 (5), pp. 809-825, 1995.
353. L.R. Taylor et al., "Seismic stability analysis for geosynthetic clay liner landfill cover placement on steep slopes", Proc. Geotech. Eng. Div., San Diego, No 54, ASCE, pp. 196-211, 1995.
354. Y. Toi and D. Isobe, "Finite element analysis of quasi-static and dynamic collapse behaviors of framed structures by the adaptively shifted integration technique", Comput. Struct. 58 (5), pp. 947-955, 1996.
355. A.C. Wijeyewickrema and L. M. Keer, "Critical speeds and buckling loads of a pre-twisted rotor", J. Sound Vib. 179 (1), pp. 109-129, 1995.
356. B. Yardimoglu and M. Sabuncu, "Dynamic stability of discs with variable thickness and restrained elastically at the inner edge", Des.: Anal. Synth. Appl., London, PD 64, ASME, pp. 69-76, 1994. Other reviews and books
357. D. Bushnell, Computerized Buckling Analysis of Shells, M. Nijhoff Publ., The Netherlands, 1985.
358. D. Bushnell, "Static collapse: a survey of methods and modes of behavior", Finite Elem. Anal. Des. 1, pp. 165-205, 1985.
359. J.M. Davies, "Sandwich panels", Thin-Wall. Struct. 16 (1/4), pp. 179-198, 1993.
360. M. Farshad, Stability of Structures, Elsevier, Amsterdam, 1994.
361. P.L. Gould, Analysis of Plates and Shells, Springer, Berlin, 1987.
362. M.D. Kotsovos and M.N. Pavlovic, Structural Concrete: Finite-Element Analysis for Limit-State Design, Telford, London, 1995.
363. M.R. McLean and M.A. Addis, "Wellbore stability analysis. A review of current methods of analysis and their field application", IADC/SPE 1990 Drilling Conf., Dallas, SPE, pp. 261-274, 1990.
364. H.D. Mittelmann and H. Weber, "Numerical methods for bifurcation problems-a survey and classification", in: Bifurc. Prob. Numer. Solut., ISNM 54, Birkhauser, pp. 1-45, 1980.
365. J. Padovan, "Solving postbuckling collapse of structures", Finite Elem. Anal Des 1, pp. 363-385, 1985.
366. E. Riks, "Some computational aspects of the stability analysis of nonlinear structures", Comp. Meth. Appl. Mech. Eng. 47, pp. 219-259, 1984.
367. A.N. Sherbourne and H.A. El-Ghazaly, "Ultimate capacity of nonsymmetrical moment connections: review and parametric study", Comput. Struct. 22 (4), pp. 599-617, 1986.
368. N.G. Tsuvalis and V.J. Papazoglou, "Theories of the bending and static buckling of laminated anisotropic rectangular plates: a survey", in: S.A. Paipetis (ed.) Phase Inter. Comp. Mat., Omega Sci., pp. 439-446, 1992.
369. Z. Waszczyszyn et al., Stability of Structures by Finite Element Methods, Elsevier, Amsterdam, 1994.
370. F.W. Williams, "Review of exact buckling and frequency calculations with optional multi-level substructuring", Comput. Struct. 48 (3), pp. 547-552, 1993.
371. F.W. Williams and W.H. Wittrick, "Exact buckling and frequency calculations surveyed", J. Struct. Eng., ASCE 109 (1), pp. 169-187, 1983.
372. D.Q. Cao and Z.Z. Shu, "Robust stability bounds for multi-degree-of-freedom linear systems with structured perturbations", Dyn. Stability Syst. 9 (1), pp. 79-87, 1994.
373. C.J. Cheng and R. Wang, "Boundary integral equations and the boundary element method for buckling analysis of perforated plates", Eng. Anal. Boundary Elem. 17 (1), pp. 57-68, 1996.
374. Y.J. Chiou and S.Y. Chi, "Study on buckling of offshore pipelines", J. Offshore Mech. Arctic Eng., ASME 118 (1), pp. 62-70, 1996.
375. J.T. Hogan and A. Martynov, "Sensitivity of ITER MHD global stability to edge pressure gradients", Fusion Technol. 26 (3), pp. 322-326, 1994.
376. F. Kasza, "Dual reciprocity method for statics and stability of varying cross section beams and structure elements", 3rd World Cong. Comp. Mech., Chiba, Japan, pp. F12-5, 1994.
377. C.Y. Lee et al., "Simplified pile-slope stability analysis", Comp. Geotechnics 17 (1), pp. 1-16, 1995.
378. H.G. Poulos, "Design of reinforcing piles to increase slope stability", Canad. Geotech. J. 32 (5), pp. 808-818, 1995.
379. U.K. Singh and D.G. Rao, "Evaluation of shaft pillar stability using numerical modelling methods - a case study", J. Mines Metals Fuels 42 (8/9), pp. 195-205, 1994.
380. V. Sladek and J. Sladek, "Multiple reciprocity method in BEM formulations for solution of plate bending problems", Eng. Anal. Boundary Elem. 17 (2), pp. 161-173, 1996.
381. W. Sulisz, "Stability analysis for multilayered rubble bases", J. Waterway, Port, Coast. Ocean Eng. 120 (3), pp. 269-282, 1994.
382. S. Syngellakis and A. Elzein, "Plate buckling loads by the boundary element method", Int. J. Numer Methods. Eng. 37 (10), pp. 1763-1778, 1994.
383. M. Tanaka et al., "Application of BEM to the linear buckling problem of thin elastic plates", in: S. N. Atluri et al., eds., Comp. Mech.'95, Springer, Berlin, pp. 2708-2713, 1995.
384. J. Xu and Z. Chen, "Stability analysis of tunnel engineering by elasto-plastic boundary element method", 1st Int. Conf. Eng. Comput. Comp. Simul., Changsha, pp. 494-500, 1995.
385. J. Ye, "Axisymmetric elastic postbuckling of circular plates", Int. J. Press. Vess. Piping 62 (3), pp. 213-217, 1995.
386. A. Elzein et al., Plate Stability by Boundary Element Method, Springer, New York, 1991.