Determination of processing-induced stresses and properties of layered and graded coatings: Experimental method and results for plasma-sprayed Ni-Al2O3

Acta Materialia

Volumn 45, Issue 8, 1997, Pages 3123-3134

  Kesler, O ^a   Finot, M ^a,b   Suresh, S ^a   Sampath, S ^c  

^a Massachusetts Institute of Technology Cambridge   (United States)

^b LAFARGE CENTRE DE RECHERCHE   (France)

^c STONY BROOK UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITION; ELASTIC MODULI; MATERIALS TESTING; PLASMA SPRAYING; STRAIN; STRESSES; THERMAL CYCLING; THERMAL EXPANSION; THERMAL LOAD;

FOUR POINT BEND TEST; PLASMA SPRAYED NICKEL ALUMINA; THERMAL EXPANSION COEFFICIENT; THERMAL EXPANSION MISMATCH; THERMOMECHANICAL ANALYSES; YOUNG MODULUS;

SPRAYED COATINGS;

EID: 0031200102     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-6454(97)00015-3     Document Type: Article

References (48)

1. Rabin, B. H. and Shiota, I. (ed.), Special Issue on Functionally Gradient Materials, MRS Bull., 1995, 20.
2. Mortensen, A. and Suresh, S., Int. Mater. Rev., 1995, 40, 239.
3. Giannakopoulos, A. E., Suresh, S., Finot, M. and Olsson, M., Acta metall. mater., 1995, 43, 1335.
4. Finot, M., Suresh, S., Bull, C. and Sampath, S., Mater. Sci. Engng A, 1996, 205A, 59.
5. Weissenbek, E., Pettermann, H. E. and Suresh, S., Acta mater., in press.
6. Williamson, R. L., Wright, J. K. and Maggs, K. J., Mater. Sci. Engng, 1994, 187, 87.
7. Drake, J. T., Williamson, R. L. and Rabin, B. H., J. appl. Phys., 1993, 74, 1321.
8. Fitzgerald, E. A., Xie, Y.-H., Monroe, D., Silverman, P. J., Kuo, J.-M., Kortar, A. R., Thiel, F. A., Weir, B. E. and Feldman, L. C., J. Vac. Sci. and Technol., 1992, B10, 1807.
9. Society for Experimental Mechanics, Handbook of Measurement of Residual Stresses, ed. Jian Lu. Fairmount Press, Inc., Lilburn, GA, 1996.
10. Clyne, T. W. and Gill, S. C., J. Therm. Spray Technol., 1996, 5(4), 401.
11. Gudge, M., Rickerby, D. S., Kingswell, R. and Scott, K. T., Proc. 3rd Int. Therm. Spray Conf., Long Beach, CA. Thermal Spray Society, Materials Park, OH, 1990, pp. 331-337.
12. Greving, D. J., Rybicki, E. F. and Shadley, J. R., Proc. 7th Nat. Spray Conf., Boston, MA. Thermal Spray Society, Materials Park, OH, 1994, pp. 647-653.
13. Bialucki, P., Kaczmar, W. and Gladysz, J., Advances in Thermal Spraying: Proc. 11th Int. Therm. Spray Conf., Welding Institute of Canada, Pergamon Press, New-York, 1986, p. 837.
14. Hobbs, M. K. and Reiter, H., Thermal Spray: Advances in Coatings Technology. ASM, Materials Park, OH, 1988, pp. 285-290.
15. Gill, S. C. and Clyne, T. W., Metall. Trans. B, 1991, 21, 377.
16. Gill, S. C. and Clyne, T. W., Proc. 7th Nat. Spray Conf., Boston, MA. Thermal Spray Society, Materials Park, OH, 1994, pp. 581-586.
17. Gill, S. C. and Clyne, T. W., Thin Solid Films, 1994, 250, 172.
18. Kuroda, S., Colloquium, SUNY, Stonybrook, NY, 1996.
19. Shull, A. L., Zolla, H. G. and Spaepen, F., Proc. MRS Fall '94 Symp. on Thin Films: Stresses and Mechanical Properties V, Boston, MA. Mater. Res. Society, Pittsburgh, 1994, pp. 211-216..
20. Clyne, T. W. and Tsui, Y. C., 3rd Int. Symp. on Structural and Functional Gradient Materials, Lausanne, Switzerland, ed. B. Ilschner and N. Cherradi. EPFL, Lausanne, 1994, pp. 411-415.
21. Howard, S. J. and Clyne, T. W., Proc. 7th Nat. Spray Conf., Boston, MA. Thermal Spray Society, Materials Park, OH, 1994
22. Leger, A. C., Grimaud, A., Fauchais, P. and Catteau, C., National Thermal Spray Conf., 1996, in press.
23. Tani, N., Ishida, T., Kawano, M. and Kamachi, K., Advances in Thermal Spraying; Proc. 11th Int. Therm. Spray. Conf., Welding Institute of Canada, Pergamon Press, New York, 1986, p. 605.
24. Tobe, S., Misawa, H., Akita, K. and Kon, Y., Proc. 7th Nat. Therm. Spray Conf., Boston, MA. Thermal Spray Society, Materials Park, OH, 1994.
25. Zhuong, H. and Zhang, T., 2nd Plasma Technik Symp., 1989. 3, 331.
26. Knight, R. and Smith, R. W., Proc. 6th Nat. Spray Conf., Anaheim, CA, 1993, pp. 607-612.
27. Ma, Q. and Clarke, D. R., Acta metall. mater., 1993, 41, 1811.
28. Ma, Q. and Clarke, D. R., Acta metall. mater., 1993, 41, 1817.
29. Freund, L. B., J. Mech. Phys. Solids, 1996, 44, 723.
30. Kuroda, S. and Clyne, T. W., Thin Solid Films, 1991, 200, 49.
31. Finot, M. and Suresh, S., J. Mech. Phys. Solids, 1996, 44, 683.
32. Ho, S. and Lavernia, E. J., Metall. Mater. Trans. A, 1996, 27A, 3241.
33. Parthasarathi, S., Tittmann, B. R., Sampath, K. and Onesto, E. J., J. Therm. Spray Technol., 1995, 4, 367.
34. Rybicki, E. F., Shadley, J. R., Xiong, Y. and Greving, D. J., J. Therm. Spray Technol., 1995, 4, 377.
35. Leigh, S. H., Lin, C. K., Sampath, S., Herman, H. and Berndt, C. C., Proc. Int. Therm. Spray Conf., Kobe, 1995, pp. 945-950.
36. Chiu, C.-C. and Case, E. D., Mater. Sci. Engng, 1991, A132, 39.
37. Chiu, C.-C., Mater. Sci. Engng, 1992, A150, 139.
38. Weihs, T. P., Hong, S., Bravman, J. C. and Nix, W. D., Mater. Res. Soc. Symp. Proc., 1989, 130, 87.
39. Finot, M., Kesler, O. and Suresh, S., Method and apparatus for the evaluation of a depth profile of thermo-mechanical properties of material and coatings, MIT case no. 7358, Cambridge, MA, US Patent filed July 1996.
40. Timoshenko, S. P. and Goodier, J. N., Theory of Elasticity, 3rd edn. McGraw-Hill, New York, 1970.
41. Crandall, S. H., Dahl, N. L. and Lardner, T. J., An Introduction to the Mechanics of Solids, 2nd edn. McGraw-Hill, New York, 1978.
42. Stoney, G. G., Proc. R. Soc. Lond. Ser. A, 1909, 82, 172.
43. Pajares, A., Wei, L., Lawn, B., Padture, N. and Berndt, C., Mater. Sci. Engng, 1996, A208, 158.
44. Hillery, R. V., Pilsner, B. H., McKnight, R. L., Cook, T. S. and Hartle, M. S., NASA Contractor Report 180807, 1988.
45. Suresh, S., Giannakopoulos, A. E. and Alcala, J., Acta mater., in press.
46. McPherson, R., Proc. 5th Conf. Aluminum Oxide, Prague, Czechoslovakia. Prague Inst. of Chem. Tech., 1990, p. 1.
47. Sturlese, S., Dal Maschio, R., Bartuli, G., Zacchetti, N. and Berardo, M., High Performance Ceramic Films and Coatings, ed. P. Vicenzini. Elsevier Science Publish., 1991, p. 353.
48. Mallick, P. K., Fiber-Reinforced Composites, 2nd edn. Marcel Dekker, New York, 1993.