Finite element modeling and experimental verification of lower extremity shape change under load

Journal of Biomechanics

Volumn 30, Issue 5, 1997, Pages 531-536

  Commean, P K ^a   Smith, K E ^a   Vannier, Michael W ^a,c   Szabo, B A ^b   Actis, R L ^b  

^a WASHINGTON UNIVERSITY SCHOOL OF MEDICINE   (United States)

^b WASHINGTON UNIVERSITY   (United States)

^c UNIVERSITY OF IOWA   (United States)

Author keywords

Anthropometry; Finite element modeling; Lower limb prosthetics; Material properties determination; Spiral computed tomography

Indexed keywords

ANTHROPOMETRY; BIOMECHANICS; COMPUTERIZED TOMOGRAPHY; ELASTICITY; ESTIMATION; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; TISSUE;

SPIRAL X RAY COMPUTED TOMOGRAPHY (SXCT);

ARTIFICIAL LIMBS;

ANTHROPOMETRY; ARTICLE; BONE PROSTHESIS; HUMAN; LEG; METHODOLOGY; MODEL; PRIORITY JOURNAL; SOFT TISSUE; SPIRAL COMPUTER ASSISTED TOMOGRAPHY; WEIGHT BEARING;

ANTHROPOMETRY; ARTIFICIAL LIMBS; ELASTICITY; HUMANS; LEG; MODELS, BIOLOGICAL; TOMOGRAPHY, X-RAY COMPUTED; WEIGHT-BEARING;

EID: 0031148570     PISSN: 00219290     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0021-9290(96)00179-0     Document Type: Article

References (34)

1. Babuska, I. and Suri, M. (1990) The p and h-p versions of the finite element method, an overview. Comput. Methods Appl. Mech. Engng 80, 5-26.
2. Babuska, I., Szabo, B. A. and Katz, I. N. (1981) The p-version of the finite element method SIAM. J. Numer. Anal. 18, 515-545.
3. Basu, P. K., Beall, A. G., Simmons, D. and Vannier, M. W. (1986) Three-D femoral stress analysis using CT scans and p-version FEM. Biomat. Med. Dev. Artif. Org. 13(3-4), 163-186.
4. Commean, P. K., Smith, K. E., Cheverud, J. M. and Vannier, M. W. (1996) Precision of surface measurements for below knee residua. Archives of physical medicine and rehabilitation research. Arch. Phys. Med. Rehabil. 77, 477-486.
5. Commean, P. K., Smith, K. E. and Vannier, M. W. (1997) Lower extremity residual limb slippage within the prosthesis. Arch. Phys. Med. Rehabil. (in press).
6. Crawford, C. R. and King, K. F. (1990) Computed tomography scanning with simultaneous patient translation. Med. Phys. 17, 967-982.
7. Creswell, L. L., Moulton, M. H., Wyers, S. G., Pirolo, J. S., Fishman, D. S., Perman, W. H., Myers, K. W., Actis, R. L., Vannier, M. W., Szabo, B. A. and Pasque, M. K. (1994) An experimental method for evaluating constitutive models of the myocardium in in vivo heart. Am. Physiology Society, Modeling Physiol. 363-6135/94, H853-H863.
8. Creswell, L. L., Pirolo, J. S., Szabo, B. A., Myers, K. W., Bresina, S. J., Perman, W. H., Vannier, M. W. and Pasque, M. K. (1992) Estimation of regional myocardial stress: p-version finite element analysis using an MRI-based solid mathematical model. Automedica 14, 319-334.
9. Faulkner, V. W. and Walsh, N. E. (1989) Computer designed prosthetic socket from analysis of computed tomography data. J. Prosth. Orthot. 1(3), 154-164.
10. Kalender, W. A. and Polacin, A. (1991) Physical performance characteristics of spiral CT scanning. Med. Phys. 18, 910-915.
11. Kalender, W. A., Polacin, A. and Suss, C. (1994) A comparison of conventional and spiral CT: an experimental study on the detection of spherical lesions. J. Comput. Assist. Tomogr. 18(2), 167-176.
12. Kalender, W. A., Seissler, W., Klotz, E. and Vock, P. (1990) Spiral volumetric CT with single-breath-hold technique, continuous transport, and continuous scanner rotation. Radiology 176, 181-183.
13. Moulton, M. J., Creswell, L. L., Wyers, S. G., Actis, R. L., Szabo, B. A., Vannier, M. W. and Pasque, M. K. (1993) An inverse material identification algorithm for determining in vivo myocardial material properties. Part 2: medical informatics, ethics, cardiology, instrumentation. Proc. Annual Int. Conf. IEEE EMBS, Vol. 15, 901-902.
14. Nissan, M. (1977) A simplified model for the short-below knee stump. J Biomechanics 10, 651-658.
15. Noel, A. T. and Szabo, B. A. (1996) Solution of geometrically nonlinear problems using spatial reference and the p-version of the finite element method. Proceedings of 1996 ASME Design Engineering Technical Conference, Computer Engineering Conference, 18-20 August, 1996, Irvine, CA. CDROM I395CD.
16. Pirolo, J. S., Bresina S. J., Creswell, L. L., Myers, K. W., Szabo, B. A., Vannier, M. W. and Pasque, M. K. (1993) Mathematical three-dimensional solid modeling of biventricular geometry. Ann. Biomed. Engng 21(3), 199-219.
17. Pirolo, J. S., Creswell, L. L., Bresina, S. J., Perman, W. H., Szabo, B. A., Myers, K. W., Vannier, M. W. and Pasque, M. K. (1991) Regional myocardial stress distribution from magnetic resonance image-based mathematical models. Ann. Thorac. Surg. 52, 276-284.
18. Polacin, A., Kalender, W. A. and Marchai, G. (1992) Evaluation of section sensitivity profiles and image noise in spiral CT. Radiology 185, 29-35.
19. Quesada, P. and Skinner, H. B. (1991) Analysis of a below-knee patellar tendon-bearing prosthesis: a finite element study J. Rehab. Res. Dev. 28(3), 1-12.
20. Reynolds, D. P. and Lord, M. (1992) Interface load analysis for computer-aided design of below-knee prosthetic sockets. Med. Biol. Engng Comput. 30, 419-426.
21. Robb, R. A. (1995) Three-Dimensional Biomedical Imaging: Principles and Practice. VCH Publishers, New York.
22. Robb, R. A. and Barillot, C. (1988) Interactive 3-D image display and analysis. In SPIE Proc. (Edited by Casasent, D. P. and Tescher, A. G.), Vol. 939, pp. 173-202.
23. Robb, R. A. and Barillot, C. (1989) Interactive display and analysis of 3-D medical images. IEEE Trans. Med. Imaging 8(3), 217-226.
24. Sanders, J. E. and Daly, C. H. (1993) Normal and shear stresses on a residual limb in a prosthetic socket during ambulation: comparison of finite element results with experimental measurements. J. Rehab. Res. Dev. 30(2), 191-204.
25. Silver-Thorn, M. B. (1991) Prediction and experimental verification of residual limb/prosthetic socket interface pressures for below-knee amputees. Dissertation. Evanston, IL, Northwestern University.
26. Steege, J. W., Schnur, D. S. and Childress, D. S. (1987) Finite element prediction of pressure at the below-knee socket interface. In Biomechanics of Normal and Prosthetic Gait (ASME), BED 4, pp. 39-44.
27. Szabo, B. A. and Actis, R. L. (1996) Finite element analysis in professional practice. Comput. Meth. Appl. Mech. Engng 133, 209-228.
28. Szabo, B. A., Actis, R. L. and Holzer, S. M. (1995) Solution of elastic-plastic stress analysis problems by the p-version of the finite element method. The IMA Volumes in Mathematics and its Applications, Vol. 75, pp. 395-416. Springer, Berlin.
29. Szabo, B. A. and Babuska, I. (1991) Finite Element Analysis. Wiley, New York.
30. User Reference Manual (Version 1.2) (1995) Stress Check™. Engineering Software Research and Development, St. Louis, MO.
31. Vannier, M. W., Smith, K. E., Commean, P. K. and Bhatia, G. (1995) In situ evaluation of lower limb prosthesis fit by spiral computed tomography. SPIE Proc. 2434, 438-451.
32. Wang, G. and Vannier, M. W. (1994) Longitudinal resolution in volumetric X-ray CT - Analytical comparison between conventional and helical CT. Med. Phys. 21, 429-433.
33. Williams, R. B., Porter D., Roberts, V. C. and Regan, J. F. (1992) Triaxial force transducer for investigating stresses at the stump/socket interface. Med. Biol. Engng Comput 30, 89-96.
34. Zeman, R. K., Brink, J. A., Costello, P., Davros, W. J., Richmond, D. J., Silverman, P. M. and Vieco, P. T. (1995) Helical/Spiral CT: A Practical Approach. McGraw-Hill, New York.