Model identification of batch cooling crystallizations through calorimetry and image analysis

Chemical Engineering Science

Volumn 52, Issue 7, 1997, Pages 1125-1139

  Monnier, O ^a   Fevotte, G ^b   Hoff, C ^a   Klein, J P ^b  

^a SANOFI   (France)

^b UNIVERSITÉ LYON 1   (France)

Author keywords

crystal size distribution; kinetic modelling; numerical simulation; reaction calorimetry; Solution crystallization

Indexed keywords

CALORIMETERS; COMPUTER SIMULATION; COOLING; CURVE FITTING; IMAGE ANALYSIS; MATHEMATICAL MODELS; ONLINE SYSTEMS; PARAMETER ESTIMATION; PARTICLE SIZE ANALYSIS; REACTION KINETICS; SENSORS; SUPERSATURATION;

BATCH COOLING CYRSTALLIZATIONS; GRANULOMETRIC METHOD; POPULATION BALANCE EQUATIONS;

CRYSTALLIZATION;

EID: 0031127547     PISSN: 00092509     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0009-2509(96)00482-4     Document Type: Article

References (39)

1. Bohlin, M. and Rasmuson, A. C. (1992) Application of controlled cooling and seeding in batch crystallization. Can. J. Chem. Engng 70, 120-126.
2. Canegallo, S., Storti, G., Morbidelli, M. and Carra, S. (1993) Densimetry for on-line conversion monitoring in emulsion homo-and copolymerization. J. Appl. Poly. Sci. 47, 961-979.
3. Eek, R. A., Both, J. and Van der Hof, P. M. J. (1994) Closed-loop identification of a continuous crystallization process. In Selected Topics in Identification, Modelling and Control. Delft University Press, Delft.
4. Févotte, G. and Klein, J. P. (1994) Application of On-line calorimetry to the advanced control of batch crystallizers. Chem. Engng Sci. 49, 1323-1336.
5. Févotte, G. and Klein, J. P. (1995) Crystallization calorimetry for the assessment of batch seeding and cooling policies. Chem. Engng J. 59, 143-152.
6. Févotte, G. and Klein, J. P. (1996) A new policy for the estimation of the course of supersaturation in batch crystallization. Can. J. Chem. Engng 74, 372-384.
7. Garside, J. (1971) The concept of effectiveness factors in crystal growth. Chem. Engng Sci. 26, 1425-1431.
8. Grob, B., Riesen, R. and Vogel, K. (1987) Reaction calorimetry for the development of chemical reactors. Thermochim. Acta 114, 83-93.
9. Gutwald, T. and Mersmann, A. (1990) Batch cooling crystallization at constant supersaturation: technique and experimental results. Chem. Engng Technol. 13, 229-237.
10. Heffels, S. K., de Jong, E. J. and Nienoord, M. (1991) Improved operation and control of batch crystallizers. A.I.Ch.E. Symp. Ser. 87, 170-181.
11. Hlozny, L., Sato, A. and Kubota, N. (1992) On-line measurement of supersaturation during batch cooling crystallization of ammonium alum. J. Chem. Engng Japan 25, 604-606.
12. Hulburt, H. and Katz, S. (1964) Some problems in particle technology. Chem. Engng Sci. 19, 555.
13. Jager, J., Kramer, H. J., de Jong, E. J., de Wolf, S., Bosgra, O. H., Boxman, A., Merkus, H. G. and Scarlett, B. S. (1992) Control of industrial crystallizers. Powder Technol. 69, 11-20.
14. Jones, A. G. (1974) Optimal operation of a batch cooling crystallizer. Chem. Engng Sci. 29, 1075-1087.
15. Jones, A. G. and Chianese, A. (1987) Fines destruction during batch crystallization. Chem. Engng Commun. 62, 5-16.
16. Karlsen, L. G. and Villadsen, J. (1987a) Isothermal reaction calorimeters - I. A literature review. Chem. Engng Sci. 42, 1153-1164.
17. Karlsen, L. G. and Villadsen, J. (1987b) Isothermal reaction calorimeters - II. Data treatment. Chem. Engng Sci. 42, 1165-1173.
18. König, A., Emons, H. H. and Rylov, V. L. (1990) Calorimetric determination of the kinetic parameters of crystallization. Translated from Zhurnal Prikladnoi Khimii, 63, 2231-2236.
19. Levins, D. M. and Glastonbury, J. R. (1972) Particle-liquid hydrodynamics and mass-transfer in a stirred vessel. Part II. Mass transfer. Trans. Instn Chem. Engrs 50, 132-146.
20. Marchal, P. (1989) Génie de la cristallisation: application à l'acide adipique. Ph.D. thesis, INPL Nancy, France (in French).
21. Marchal, P., David, R., Klein, J. P. and Villermaux, J. (1988) Crystallization and precipitation engineering - I. An efficient method for solving population balance in crystallization with agglomeration. Chem. Engng Sci. 43, 59-67.
22. Marison, I. W., Birou, B. and Von Stockar, U. (1985) Use of a novel heat-flux calorimeter for the measurement of heat generated during growth of K. fragilis on lactose. Thermochim. Acta 85, 497-500.
23. Mersmann, A. (1995) Fundamentals of crystallization. In Crystallization Technology Handbook, ed. A. Mersmann, Marcel Dekker, New York, U.S.A.
24. Miller, S. M. and Rawlings, J. B. (1994) Model identification and control strategies for batch cooling crystallizers. A.I.Ch.E. J. 40, 1312-1327.
25. Monnier, O., Klein, J. P., Hoff, C. and Ratsimba, B. (1996) Particle size determination by laser reflection: methodology and problems. Part. Part. Syst. Charact. 13, 10-17.
26. Moritz, H. U. (1989) Polymerization calorimetry - A powerful tool for reactor control. In Polymer Reaction Engineering, ed. K. H. Reichert and U. Geiseler, pp. 248-266. VCH Verlag, Berlin, Germany.
27. Qui, Y. and Rasmuson, A. C. (1994) Estimation of crystallization kinetics from batch cooling experiments. A.I.Ch.E. J. 40, 799-812.
28. Rawlings, J. B., Witkowski, W. R. and Eaton, J. W. (1992) Modelling and control of crystallizers. Powder Technol. 69, 3-9.
29. Rawlings, J. B., Miller, S. M. and Witkowski, W. R. (1993) Model identification and control of solution crystallization processes: a review. Ind. Engng Chem. Res. 32, 1275-1296.
30. Regenass, W. (1985) Calorimetric monitoring of industrial chemical processes. Thermochim. Acta 95, 351-368.
31. Riebel, U., Kofler, V. and Löffler, F. (1990) Control of supersaturation in instationary suspension crystallization. In Industrial Crystallization '90, 11th Symp. on Industrial Crystallization, Garmish Partenkirschen, ed. A. Mersmann, pp. 595-599.
32. Riesen, R. (1992) Optimization of industrial crystallization processes. Chem. Plants and Processing, July 2629.
33. Rohani, S. and Paine, J. K. (1987) Measurement of solid concentration of a soluble compound in a saturated slurry. Can. J. Chem. Engng 65, 163-165.
34. Schmidt, C. U. and Reichert, K. H. (1987) Reaction calorimeter. A contribution to safe operation of exothermic polymerization. 10th ISCRE. Chem. Engng Sci. 43, 2133-2137.
35. Schuler, H. and Schmidt, C. U. (1992) Calorimetric state estimators for chemical reactor diagnosis and control: review of methods and applications. Chem. Engng Sci., 47, 899-915.
36. Sikdar, S. K. and Randolph, A. D. (1976) Secondary nucleation of two fast growth systems in a mixed suspension crystallizer: magnesium sulphate and citric acid water systems. A.I.Ch.E. J. 22, 110-117.
37. Singh, B. (1993) Using a crystal size distribution sensor to improve the operation and control of batch crystallizers. Anal. Proc. 30, 495-496.
38. Wey, J. S. (1985) Analysis of batch crystallization processes. Chem. Engng Commun. 35, 231-252.
39. de Wolf, S., Jager, J., Bosgra, O. H. and Kramer, H. J. (1990) Identification and control of a 970 litre evaporative crystallizer. In Industrial Crystallization '90, 11th Symposium on Industrial Crystallization, Garmish Partenkirschen, ed. A. Mersmann.