Solidification of binary hypoeutectic alloy matrix composite castings

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 27, Issue 3, 1996, Pages 595-609

  Mortensen, Andreas ^a   Flemings, Merton C ^a  

^a Massachusetts Institute of Technology Cambridge   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; ALUMINUM COPPER ALLOYS; BINARY ALLOYS; GEOMETRY; METAL CASTINGS; MICROSTRUCTURE; NUCLEATION; PHASE TRANSITIONS; REINFORCEMENT; SEGREGATION (METALLOGRAPHY); SOLIDIFICATION;

BINARY HYPOEUTECTIC ALLOY MATRIX COMPOSITE CASTINGS; INTERSTICES; MATRIX COOLING RATE; MICROSEGREGATION; MICROSTRUCTURAL TRANSITIONS;

METALLIC MATRIX COMPOSITES;

EID: 0030109117     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02648949     Document Type: Article

References (49)

1. R. Trivedi, S.H. Han, and J.A. Sekhar: in Solidification of Metal-Matrix Composites, Proc. Conf., Indianapolis, IN, 1989, P.K. Rohatgi, ed., TMS-AIME, Warrendale, PA, 1989, pp. 23-37.
2. A. Mortensen and I. Jin: Int. Mater. Rev., 1992, vol. 37, pp. 101-28.
3. A. Mortensen: Mater. Sci. Eng., 1993, vol. A173, pp. 205-12.
4. A. Mortensen, L.J. Masur, J.A. Cornie, and M.C. Flemings: Metall. Trans. A, 1989, vol. 20A, pp. 2535-47.
5. A. Mortensen and V. Michaud: Metall. Trans. A, 1990, vol. 21A, pp. 2059-72.
6. S. Ho and A. Saigal: Scripta Metall. Mater., 1994, vol. 31, pp. 351-56.
7. M.A. Khan and P.K. Rohatgi: in Microstructure Formation during Solidification of Metal Matrix Composites, Proc. Conf., Chicago, IL, 1992, P.K. Rohatgi, ed., TMS, Warrendale, PA, 1993, pp. 97-116.
8. M.A. Khan and P.K. Rohatgi: Compos. Eng., 1993, vol. 3, pp. 995-1006.
9. L.M. Fabietti and J.A. Sekhar: in Nature and Properties of Semi-Solid Materials, Proc. Conf., San Diego, CA, 1991; J.A. Sekhar and J. Dantzig, eds., TMS Warrendale, PA, 1991, pp. 41-67.
10. L.M. Fabietti and J.A. Sekhar: Metall. Trans. A, 1992, vol. 23A, pp. 3361-68.
11. L.M. Fabietti and J.A. Sekhar: J. Mater. Sci., 1994, vol. 29, pp. 473-77.
12. A. Mortensen and M.C. Flemings: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 595-609.
13. N.F. Dean, A. Mortensen, and M.C. Flemings: in Principles of Solidification of Cast Composites, Proc. Conf., Chicago, IL, 1992, P.K. Rohatgi, ed., TMS, Warrendale, PA, 1993, pp. 83-96.
14. W. Wang, F. Ajersch, and J.P.A. Löfvander: Mater. Sci. Eng., 1994, vol. A187, pp. 65-75.
15. A. Mortensen, M.N. Gungor, J.A. Cornie, and M.C. Flemings: J. Met., 1986, vol. 38, pp. 30-35.
16. J.D. Bryant, L. Christodoulou, and J.R. Maisano: Scripta Metall. Mater., 1990, vol. 24, pp. 33-38.
17. A. Luo: Scripta Metall. Mater., 1994, vol. 31, pp. 1253-58.
18. R. Trivedi and W. Kurz: Int. Mater. Rev., 1994, vol. 39, pp. 49-74.
19. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974, pp. 328-34 and 141-46.
20. E.E. Underwood: Quantitative Stereology, 1st ed., Addison-Wesley Publishing Company, Reading, MA, 1970, ch. 4.
21. J.A. Sekhar and R. Trivedi: Mater. Sci. Eng., 1989, vol. A114, pp. 133-46.
22. L.M. Fabietti, V. Seetharaman, and R. Trivedi: Metall. Trans. A, 1990, vol. 21A, pp. 1299-1310.
23. J.A. Sekhar and R. Trivedi: Mater. Sci. Eng., 1991, vol. A147, pp. 9-21.
24. K.P. Young and D.H. Kirkwood: Metall. Trans. A, 1975, vol. 6A, pp. 197-205.
25. A. Mortensen: Metall. Trans. A, 1989, vol. 19A, pp. 247-53.
26. M.N. Gungor, J.A. Cornie, and M.C. Flemings: in Cast Reinforced Metal Composites, Proc. Conf., Chicago, IL, 1988, S.G. Fishman and A.K. Dhingra, eds., ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 39-45.
27. A. Mortensen, J.A. Cornie, and M.C. Flemings: Metall. Trans. A, 1988, vol. 19A, pp. 709-21.
28. J.D. Hunt and S.Z. Lu: Mater. Sci. Eng., 1993, vol. A173, pp. 79-83.
29. S.Z. Lu and J.D. Hunt: J. Cryst. Growth, 1992, vol. 123, pp. 17-34.
30. A. Karma and P. Pelcé: Phys. Rev. A, 1989, vol. 39, pp. 4162-69.
31. N.F. Dean, A. Mortensen, and M.C. Flemings: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2295-2301.
32. W. Kurz and D.J. Fisher: Fundamentals of Solidification, 3rd ed., Trans Tech Publications, Aedermannsdorf, Switzerland, 1989, pp. 289-92.
33. H.D. Brody and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 615-24.
34. C.F. Pezzee and D.C. Dunand: Acta Metall. Mater., 1994, vol. 42, pp. 1509-24.
35. A.M. Redsten, E.M. Klier, A.M. Brown, and D.C. Dunand: Mater. Sci. Eng., 1995, in press.
36. Q.F. Li, D.G. McCartney, and A.M. Walker: Mater. Sci., 1991, vol. 26, pp. 3565-74.
37. D.J. Lloyd: Compos. Sci. Technol., 1989, vol. 35, pp. 159-79.
38. H. Lagacé and D.J. Lloyd: Can. Metall. Q., 1989, vol. 28, pp. 145-52.
39. D. Lloyd: in Metal Matrix Composites - Processing, Microstructure and Properties, 12th Risø Int. Symp. on Materials Science, Proc. Conf., Risø, Denmark, 1991, N. Hansen, D. Juul-Jensen, T. Leffers, H. Lilholt, T. Lorentzen, A.S. Pedersen, O.B. Pedersen, and B. Ralph, eds., Risø National Laboratory, Roskilde, Denmark, 1991, pp. 81-99.
40. S. Gowri and F.H. Samuel: Metall. Trans. A, 1992, vol. 23A, pp. 3369-76.
41. A. Kolsgaard, L. Arnberg, and S. Brusethaug: Mater. Sci. Eng., 1993, vol. A173, pp. 243-50.
42. P.K. Rohatgi, K. Pasciak, C.S. Narendranath, S. Ray, and A. Sachdev: J. Mater. Sci., 1994, vol. 29, pp. 5357-66.
43. A.P. Majidi, J.M. Yang, and T.W. Chou: in Interfaces in Metal Matrix Composites, Proc. Conf., New Orleans, LA, 1986, A.K. Dhingra and S.G. Fishman, eds., TMS, Warrendale, PA, 1986, pp. 27-44.
44. Z. Xia, Y. Zhou, Z. Mao, and B. Shang: Metall. Trans. B, 1992, vol. 23B, pp. 295-302.
45. Z. Xia, Z. Mao, and Y. Zhou: Z. Metallkd., 1991, vol. 82, pp. 766-68.
46. M.P. Watson and J.D. Hunt: Metall. Trans. A, 1977, vol. 8A, pp. 1793-98.
47. M. Gunduz and J.D. Hunt: Acta Metall., 1985, vol. 9, pp. 1651-72.
48. J.B. Murphy: Acta Metall., 1961, vol. 9, pp. 563-69.
49. L.J. Masur, A. Mortensen, J.A. Cornie, and M.C. Flemings: Metall. Trans. A, 1989, vol. 20A, pp. 2549-57.