Corrosion monitoring techniques for thermally driven wet and dry conditions

NACE - International Corrosion Conference Series

Volumn 2000-March, Issue , 2000, Pages

  Sridhar, N ^a   Dunn, D S ^a   Brossia, C S ^a   Moghissi, O ^a  

^a SOUTHWEST RESEARCH INSTITUTE   (United States)

Author keywords

Corrosion; High level radioactive waste; Monitoring; Sensors

Indexed keywords

CORROSION; MONITORING; SENSORS;

CORROSION MONITORING; ELECTROCHEMICAL PARAMETERS; HIGH LEVEL NUCLEAR WASTES; HIGH LEVEL RADIOACTIVE WASTES; HYDROLOGIC PROCESS; MODEL PREDICTION; PARTIALLY SATURATED; THERMALLY DRIVEN;

RADIOACTIVE WASTES;

EID: 0012798071     PISSN: 03614409     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Conference Paper

References (57)

1. U. S. Department of Energy, Viability Assessment of a Repository at Yucca Mountain, Overview. Washington, DC, Office of Civilian Radioactive Waste Management, DOE/RW-0508, (December, 1998).
2. U. S. Department of Energy, Viability Assessment of a Repository at Yucca Mountain, Total System Performance Assessment. Washington, DC, Office of Civilian Radioactive Waste Management, DOE/RW-0508, Volume 3, (December, 1998).
3. U. S. Department of Energy, Viability Assessment of a Repository at Yucca Mountain, Costs to Construct and Operate the Repository. Washington, DC, Office of Civilian Radioactive Waste Management, DOE/RW-0508, Volume 5, (December, 1998).
4. S. Mohanty, R. Codell, R. W. Rice, J. Weldy, Y. Lu, R. M. Byrne, T. J. McCartin, M. Jarzemba, and G. W. Wittmeyer, System-level Repository Sensitivity Analyses Using TPA Version 3.2 Code, San Antonio, Texas, Center for Nuclear Waste Regulatory Analyses, CNWRA 99-002, (August, 1999).
5. S. Brossia, D. S. Dunn, and N. Sridhar, Effects of Environmental Factors on Container Life, San Antonio, Texas, Center for Nuclear Waste Regulatory Analyses, CNWRA 98-008, (July, 1998).
6. T. Dietz and K. G. Kreider, Review of Materials for pH Sensing for Nuclear Waste Containment, Washington, D. C., National Institute of Standards and Technology, NBSIR 85-3237, (September, 1985).
7. K. G. Kreider, M. J. Tarlow, and P. H. Huang, Assessment of Uncertainties in Measurement of pH in Hostile Environments Characteristic of Nuclear Repositories, Washington, D. C., Nuclear Regulatory Commission, NUREG/CR-5711, (October, 1991).
8. D. D. Macdonald, S. Hettiarachchi, H. Song, K. Makela, R. Emerson, and M. Ben-Haim. Measurement of pH in subcritical and supercritical aqueous systems. Journal of Solution Chemistry 21(8): 849-881, (1992).
9. M. J. Madou, and S. R. Morrison, Chemical Sensing with Solid State Devices. Boston: Academic Press, (1987).
10. L. W. Niedrach, A new membrane-type pH sensor for use in high temperature-high pressure water. Journal of the Electrochemical Society 127(10): 2, 122-2, 130, (1980).
11. M. J. Danielson, O. H. Kaski, and J. Myers, J. of the Electrochemical Society, 132(2): 496, (1985).
12. th International Corrosion Congress, V. 6, 4, 286-4, 294, Houston, TX: NACE International, (September, 1993).
13. D. Midgley, A review of pH measurements at high temperatures, Talanta, 37(8): 767-781, (1990).
14. M. J. Madou and M. Esashi. Sensors and Actuators 1:77, (1981).
15. K. Kinoshita and M. J. Madou, J. Of Electrochemical Society, 131(5): 1, 089-1, 094, (1984).
16. P. VanHoudt, Z. Lewandowski, and B. Little, Biotechnology and Bioengineering, 40:601-608, (1992).
17. R. S. Glass, K. C. Hong, J. C. Estill, R. Reibold, W. M. Thompson, D. W. O'Brien, D. R. Ciarlo, and V. E. Granstaff, Electrochemical Array Sensors for Plating Waste Stream Monitoring, UCRL-JC-108819, Livermore, CA: Lawrence Livermore National Laboratories, (March, 1992).
18. J. H. Payer, K. Fink, and I. Song, Corrosion/97, Paper No. 308, Houston, TX: NACE International, (1997).
19. P. J. Kinlen, J. E. Heider, D. E. Hubbard. A solid-state pH sensor based on a Nafion-coated iridium oxide indicator electrode and a polymer-based silver chloride reference electrode. Sensors and Actuators, B22:13-25, (1994).
20. L. B. Kriksunov, D. D. Macdonald, and P. J. Millet, J. of Electrochemical Society, 141(11): 3, 002-3, 005, (November, 1994).
21. th International Corrosion Congress, V. 6, 4224-4236, Houston, TX: NACE International, (September, 1993).
22. D. F. Taylor, Corrosion, 47(2): 115-122, (February, 1991).
23. M. J. Danielson, Corrosion, 51(6): 450-455, (June, 1995).
24. M. A. Nolan, S. H. Tan, S. P. Kounaves. Fabrication and characterization of a solid state reference electrode for electroanalysis of natural waters with ultramicroelectrodes Analytical Chemistry 69:1, 244-1, 247, (1997).
25. N. L. Pickup, M. Lam, D. Milojevic, R. Y. Bi, J. S. Shapiro, and D. K. Y. Wong. Investigations of the feasibility of constructing a polypyrrole-mercury/mercury chloride reference electrode. Polymer 38(10): 2, 561-2, 565, (1997).
26. K. Nagy, K. Eine, K. Syverud, and O. Aune. Promising new solid-state reference electrode. Journal of the Electrochemical Society 144(1): L1-L2, (1997).
27. D. Desmond, B. Lane, J. Alderman, J. D. Glennon, D. Diamond, D. W. M. Arrigan. Evaluation of a miniaturized solid state reference electrodes on a silicon based component. Sensors and Actuators, B44:389-396, (1997).
28. H. Suzuki, A. Hiratsuka, S. Sasaki, I. Karube. Problems associated with the thin-film Ag/AgCl reference electrode and a novel structure with improved durability. Sensors and Actuators, B46:104-113, (1998).
29. H. Suzuki, A. Hiratsuka, S. Sasaki, I. Karube. An integrated three-electrode system with a micromachined liquid junction Ag/AgCl reference electrode. Analytica Chemica Acta 387:103-112, (1999).
30. B. C. LaRoy, A. C. Lilly, C. O. Tiller. A solid-state electrode for reducible gases. Journal of the Electrochemical Society 120(12): 1, 668-1, 673, (1973).
31. M. Koudelka, Sensors and Actuators 9:249, (1986).
32. R. M. Diwan, A. Raman, P. K. Battacharya, and R. Lee, Corrosion/95, Paper No. 227, Houston, TX: NACE International, (1995).
33. F. Mansfield, Journal of the Electrochemical Society 135:1, 354-1, 358, (1988).
34. A. M. G. Pacheco, M. G. S. Ferreira. Corrosion Science 36(5): 797-813, (1994).
35. T. Shinohara, S. Tsujikawa, S. Motoda, Y. Suzuki, W. Oshikawa, S. Itomura, T. Fukushima, S. Izumo, Evaluation of Corrosivity of Marine Atmosphere by ACM (Atmosphere Corrosion Monitor) Type Corrosion Sensor, International Symposium on Plant Aging and Life Predictions of Corrodible Structures, Sapporo, Japan: Japan Society of Corrosion Engineering, (1995).
36. Chawala, S. K. T. Anguish, and J. H. Payer. Microsensors for corrosion control Corrosion 45(7): 595-601, (1989).
37. D. S. Dunn, M. B. Bogart, C. S. Brossia, and G. A. Cragnolino, Corrosion/99, Paper No. 223, Houston, TX: NACE International, (1999).
38. N. Sridhar and D. S. Dunn, Journal of the Electrochemical Society, 144, 4, 243, (1997).
39. C. S. Brossia, D. S. Dunn, and N. Sridhar, in Critical Factors in Localized Corrosion HI, 98-17, 485, Pennington, NJ: The Electrochemical Society, (1999).
40. T. H. Lilley, Raman spectroscopy of aqueous electrolyte solutions, Chapter 6, Water, A Comprehensive Treatise, V. 3, F. Franks (ed.), New York: Plenum Press, (1973).
41. D. R. Lombardi, C. Wang, B. Sun, A. W. Fountain III, T. J. Vickers, C. K. Mann, F. R. Reich, J. G. Douglas, B. A. Crawford, and F. L. Kohlasch, Applied Spectroscopy, 48(7): 875-883, (1994).
42. M. J. P. Leiner and P. Hartmann, Sensors and Actuators, B11:281, (1993).
43. S. H. Alabbas, D. C. Ashworth, B. Bezzaa, S. A. Momin, and R. Narayanaswamy, Sensors and Actuators, A129:51(1996).
44. Y. V. Kostov, Sensors and Actuators, B8:99, (1992).
45. C. Dafu, C. Qiang, H. Jinghong, C. Jinge, L. Yating, and Z. Zemin, Sensors and Actuators, B12:29, (1993).
46. T. Hao, X. Xing, and C.-C. Liu, Sensors and Actuators, B10:155, (1993).
47. J. I. Peterson, S. R. Goldstein, R. V. Fitzgerald, and D. K. Buckhold, Analytical Chemistry, 53, 864, (1980).
48. P. Boutin, J. Mugnier, and B. Valeur, Journal of Fluorescence, 7, 215S, (1997).
49. A. MacLean, W. C. Michie, S. G. Pierce, G. Thursby, B. Culshaw, C. Moran, and N. B. Graham, Proceedings of SPIE-The International Society for Optical Engineering, vol. 3, 330, 134, (1998).
50. P. Cosentino, B. Grossman, C. Shieh, S. Doi, H. Xi, and P. Erbland, Journal of Geotechnical Engineering, 617, (August 1995).
51. A. M. Smith, Materials Interactions in Optical Fiber Sensors, in Optical Fiber Sensors: Principles and Components, vol. 1, 189, Norwood MA: Artech House, Inc., (1988).
52. C. E. Brossia and S. C. Wu, Proceedings of SPIE-The International Society for Optical Engineering, vol. 1, 368, 115, (1990).
53. A. J. Ricco, The Electrochemical Society Interface, 3(4): 38-44, (1994).
54. ASTM G4, Conducting Corrosion Coupon Tests in Field Applications, Philadelphia, PA.: American Society for Testing and Materials.
55. NACE RP0775-91, Preparation and Installation of Corrosion Coupons and Interpretation of Test Data in Oilfield Operations, Houston, TX: NACE International.
56. D. S. Dunn, N. Sridhar, and G. A. Cragnolino, Corrosion/94, Paper No. 138, Houston, TX: NACE International, (1994).
57. R. D. McCright, Corrosion Data and Modeling: Update for Viability Assessment, Engineered Materials Characterization Report, Volume 3, Revision 1.1, UCRL-ID-119564, (July 1998).