Characterization of the mesostructure of fused-deposition acrylonitrile-butadiene-styrene materials

Rapid Prototyping Journal

Volumn 6, Issue 3, 2000, Pages 175-185

  Rodriguez, Jose F ^a   Thomas, James P ^a   Renaud, John E ^a  

^a University of Notre Dame   (United States)

Author keywords

Deposition; Fibre

Indexed keywords

ANISOTROPY; CHARACTERIZATION; COMPUTER AIDED DESIGN; EXTRUSION; OPTIMIZATION; SOFTWARE PROTOTYPING; STIFFNESS; STYRENE;

FIBER GAP; FIBRE; FUSED DEPOSITION (FD); MESOSTRUCTURAL FEATURES;

DEPOSITION;

EID: 0004495157     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552540010337056     Document Type: Article

References (29)

1. Abrams, H. (1971), "Practical applications of quantitative metallography", Stereology and Quantitative Metallography. ASTM STP 504, ASTM, Philadelphia, PA, pp. 138-82.
2. Agarwala, M.K., Jamalabad, V., Langrana, N., Safari, A., Whalen, P.J. and Danforth, S.C. (1996a), "Structural quality of parts processed by fused deposition", Rapid Prototyping Journal, Vol. 2 No. 4, pp. 4-19.
3. Agarwala, M.K., van Weeren, R., Bandyophadyay, A., Safari, A., Danforth, S.C. and Priedeman, W.R. (1996b), "Filament feed materials for fused deposition of ceramics and metals", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 451-8.
4. Agarwala, M.K., van Weeren, R., Bandyophadyay, A., Whalen, P., Safari, A. and Danforth, S.C. (1996c), "Fused deposition of ceramics and metals: an overview", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 385-92.
5. ASTM (1998), "Standard test method for determining volume fractions by systematic manual point count", E562-95, ASTM Standards, Vol. 03.01, ASTM, Philadelphia, PA, pp. 507-12.
6. Bertoldi, M., Yardimci, M.A., Pistor, C.M., Güçeri, S.I. and Sala, G. (1998), "Mechanical characterization of parts processed via fused deposition", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 549-56.
7. Blake, P., Fodran, E., Koch, M., Menon, U., Priedeman, B. and Sharp, S. (1997), "FDM of ABS patterns for investment casting", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 195-202.
8. Bosett, E., Rivera, L., Qui, D., McCuiston, R., Langrana, N., Rangarajan, S., Venkataraman, N., Danforth, S. and Safari, A. (1998), "Real time microscopy for the fused deposition method", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 113-20.
9. Dvorak, P. (1993), "Rapid prototypes for production parts", Machine Design, October, pp. 48-54.
10. Dvorak, P. (1998), "Here comes rapid tooling", Machine Design, July, pp. 57-64.
11. Elkins, K., Nordby, H., Janak, C., Gray, R.W. IV, Bøhn, J.H. and Baird, D.G. (1997), "Soft elastomers for fused deposition modeling", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 441-8.
12. Gray, R.W., Baird, D.G. and Bohn, J.H. (1998), "Effects of processing conditions on short TLCP fiber reinforced FDM parts", Rapid Prototyping Journal, Vol. 4, pp. 14-25.
13. Jamalabad, V.R., Agarwala, M.K., Langrana, N.A. and Danforth, S.C. (1996), "Progress improvements in fused deposition of ceramics (FDC)", No. DFM1279, Proc. 1996 ASME Design Engr. Tech. Conf., Irvine, CA.
14. Jamalabad, V.R., Chard, J.A., Gasdaska, C.J. and Clancy, R.B. (1998), "Topology driven improvement of build parameters", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 319-25.
15. Kai, C.C. and Fai, L.K. (1997), Rapid Prototyping, Wiley, NY, pp. 95-97 and Appendix B: Nos. 20-27.
16. Kulkarni, P. and Dutta, D. (1997), "Deposition strategies and resulting part stiffnesses in layered manufacturing", No. DAC3987, Proc. 1997 ASME Design Engr. Tech. Conf., Sacramento, CA.
17. McNulty, T.F., Cornejo, I., Mohammadi, F., Danforth, S.C. and Safari, A. (1998), "Development of a binder formulation for fused deposition of ceramics", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 613-20.
18. Pekin, S., Zangvil, A. and Ellingson, W. (1998), "Binder formulation in EVA-WAZ systems for fused deposition of ceramics", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 613-20.
19. Rodriguez, J.F., Thomas, J.P. and Renaud, J.E. (1997), "Characterizing the microstructure of fused deposition polymer components", CAE and Intelligent Processing of Polymeric Materials, MD-Vol. 79, ASME, NY, pp. 299-308.
20. Rodriguez, J.F., Thomas, J.P. and Renaud, J.E. (1999a), "Tailoring the mechanical properties of fused-deposition manufactured components", Proc. Rapid Prototyping and Manufacturing '99, Vol. 3, Society of Manufacturing Engineers, Dearborn, MI, pp. 629-43.
21. Rodriguez, J.F., Thomas, J.P. and Renaud, J.E. (1999b), "Maximizing the strength of fused-deposition ABS plastic parts", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 335-42.
22. Rovick, J.S. (1994), "An additive fabricator for high speed production of artificial limbs", 5th International Conference on Rapid Prototyping, Dayton, OH, pp. 47-56.
23. Sarkis, B.E. and Kennerknecht, S. (1994), "Rapid prototype casting (RPC)", 5th International Conference on Rapid Prototyping, Dayton, OH, pp. 291-300.
24. Stratasys (1995), "FDM1600 User Manual".
25. Stratasys (1997), private communication.
26. Stratasys (1999), private communication.
27. Van Weeren, R., Agarwala, M., Jamalabad, V.R., Bandyophadyay, A., Vaidyanathan, R., Langrana, N., Safari, A., Whalen, P., Danforth, S.C. and Ballard, C. (1995), "Quality of parts processed by fused deposition", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 314-21.
28. Yardimci, M.A. and Güçeri, S. (1996), "Conceptual framework for the thermal process modeling of fused deposition", Rapid Prototyping Journal, Vol. 2, pp. 26-31.
29. Yardimci, M.A., Takeshi, H., Güçeri, S. and Danforth, S.C. (1997), "Thermal analysis of fused deposition", Proc. Solid Freeform Fabrication Symposium, Austin, TX, pp. 689-98.