Layered manufacturing: Current status and future trends

Journal of Computing and Information Science in Engineering

Volumn 1, Issue 1, 2001, Pages 60-71

  Dutta, Debasish ^a   Prinz, Fritz B ^b   Rosen, David ^c   Weiss, Lee ^d  

^a UNIVERSITY OF MICHIGAN   (United States)

^b Stanford University   (United States)

^c GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^d CARNEGIE MELLON UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0002734098     PISSN: 15309827     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1355029     Document Type: Article

References (80)

1. SME RPA, 1999. Rapid Prototyping Industry Trends, Volume 1, Rapid Prototyping Association of SME.
2. Kumar, V., and Dutta, D., 1997, “An Assessment of Data Formats for Layered Manufacturing,” Adv. Eng. Softw., 28, No. 3, March, pp. 151-164.
3. Kumar, V., 1999. “Solid Modeling and Algorithms for Heterogeneous Objects,” Ph.D. Dissertation, University of Michigan. 70 /Vol. 1, MARCH 2001
4. Jackson, T., Liu, H., Patrikalakis, N. M., Sachs, E. M., and Cima, M. J., 1999. “Modeling and Designing Functionally Graded Material Components for Fabrication with Local Composition Control,” Materials and Design, special issue, Elsevier Science, Netherlands.
5. Kumar, V. Ashok, and Wood, Aaron, 1999, “Representation and Design of Heterogeneous Components,” Proceedings of SFF Conference, August, Austin, TX.
6. Stanton, E. L., Crain, L. M., and Neu, T. F., 1977, “A Parametric Cubic Modeling System for General Solids of Composite Material,” Int. J. Numer. Methods Eng., 11, pp. 653-670.
7. Wu, Z. W., Soon, S. H., and Feng, L., 1999. “NURBS-based Volume Modeling,” International Workshop on Volume Graphics, pp. 321-330.
8. Jackson, T, 2000, “Analysis of Functionally Graded Material Representation Methods,” Ph.D. thesis, Massachusetts Institute of Technology, Cambridge, MA.
9. Shin, K. H. and Dutta, D., 2000, “Constructive Representations of Heterogeneous Objects,” ASME J. Comput. Inf. Sci. Eng., in review.
10. Bhashyam, S., Shin, K. H., and Dutta, D., 2000, “An Integrated CAD System for Design of Heterogeneous Objects,” Rapid Prototyping Journal, 6, No. 2.
11. Kumar, V., and Dutta, D., 1998, “An Approach to Modeling and Representation of Heterogeneous Objects,” ASME J. Mech. Des., 120, No. 4, December.
12. Bendsoe, M. P., and Kikuchi, N., 1988, “Generating Optimal Topologies in Structural Design Using a Homogenization Method,” Comput. Methods Appl. Mech. Eng., 71, pp. 197-224.
13. Marsan, A., and Dutta, D., 1999, “Computational Techniques for Automatically Tiling and Skinning Branched Objects,” Computers & Graphics, 23, No. 1, pp. 111-126.
14. Rvachev, V. L., Sheiko, T. I., Shaipro, V., and Tsukanov, I., 2000, “Tranfinite Interpolation over Implicitly Defined Sets,” Technical Reports SAL 2000-1, Spatial Automation Laboratory, University of Wisconsin-Madison.
15. Prinz, F., 1997, JTEC/WTEC Panel Report on Rapid Prototyping in Europe and Japan Volume 1. Analytical Chapters, March.
16. Nickel, A., 1999, “Analysis of Thermal Stresses in Shape Deposition Manufacturing of Metal Part,” Ph.D. thesis, Stanford University, August.
17. Allen, Seth, and Dutta, Deba, 1995, “Determination and Evaluation of Support Structures in Layered Manufacturing,” J. Des. Manufac., 5, pp. 153-162.
18. Thompson, David C., and Richard H., Crawford, 1995, “Optimizing Part Quality with Orientation,” Solid Freeform Fabrication Symposium, H. L. Marcus et al., Eds., University of Texas, Austin, August.
19. Suh, Yong S., and Wozny, Michael 1995, “Integration of a Solid Freeform Fabrication Process into a Feature-Based CAD System Environment,” Solid Freeform Fabrication Symposium, H. L. Marcus et al., Eds., University of Texas, Austin, August.
20. Bablani, Minoo, and Bagchi, Amit, 1995, “Quantification of Errors in Rapid Prototyping Processes, and Determination of Preferred Orientation of Parts,” Transactions of the North American Manufacturing Research Institution of the SME, Vol. XXIII, SME, Houghton, MI, May, pp. 319-324.
21. Marsan, Anne, and Dutta, Debasish, 1997, “A Survey of Process Planning Techniques for Layered Manufacturing,” Proceedings of the 1997ASME Design Automation Conference, Sacramento, CA, Sept.
22. Lan, Po-Ting, Chou, Shuo-Yan, Chen, Lin-Lin, and Gemmill, Douglas, 1997, “Determining Fabrication Orientations for Rapid Prototyping with Stere-olithography Apparatus,” Comput.-Aided Des., 29, No. 1, pp. 53-62.
23. Cheng, W., Fuh, J. Y. H., Nee, A. Y. C., Wong, Y. S., Logh, H. T., and Miyazawa, T., 1995, “Multi-objective Optimization of Part Building Orientation in Stereolithography,” Rapid Prototyp. In. J., 1, No. 4, pp. 12-23.
24. Kirschman, C. F., Jara-Almonte, C. C., Bagchi, A., Dooley, R. L., and Ogale, A. A., 1991, “Computer Aided Design of Support Structures for Stereolitho-graphic Components,” Proceedings of the 1991 ASME Computers in Engineering Conference, Santa Clara, CA, August, pp. 443-448.
25. Webb, D., Verdes, V., and Cassapis, C., 1994, “Computer-aided Support-Structure Design for Stereolithography Models,” Proceedings of the Fifth International Conference on Rapid Prototyping, R. P. Chartoff, A. J. Lightman, and J. A. Schenk, Eds. University of Dayton, June, pp. 221-228.
26. Swaelens, B., Pauwels, J., and Vancraen, W., 1995, “Support Generation for Rapid Prototyping,” Proceedings of the Sixth International Conference on Rapid Prototyping, R. P. Chartoff and A. J. Lightman, Eds. University of Dayton, June, pp. 115-121.
27. Chalasani, Kumar, Jones, Larry, and Roscoe, Larry, 1995, “Support Generation for Fused Deposition Modeling,” Solid Freeform Fabrication Symposium, H. L. Marcus et al., Eds., University of Texas, Austin, August, pp. 229-241.
28. Otto, Harald E., Kimura, Fumihiko, Mandorli, Ferruccio, and Cugini, Umberto, 1995, “Extension of Feature-Based CAD Systems Using TAE Structures to Support Integrated Rapid Prototyping,” Proceedings of the Computers in Engineering Conference and the Engineering Database Symposium, ASME, pp. 779-793.
29. Allen, Seth, and Dutta, Deba, 1997, “Wall Thickness Control in Layered Manufacturing.” Proceedings of the 13th Annual ACM Symposium on Computational Geometry, Nice, France.
30. Rock, Stephen J., and Wozny, Michael J., 1991, “Utilizing Topological Information to Increase Scan Vector Generation Efficiency,” Solid Freeform Fabrication Symposium, H. L. Marcus et al., Eds., University of Texas, Austin, August, pp. 28-36.
31. Chalasani, K. L., Grogan, B. N., Bagchi A, 1991, A. Jara-Almonte, C. C., Ogale, A. A., and Dooley, R. L., “An Algorithm to Slice 3D Shapes for Reconstruction in Prototyping Systems,” Proceedings of the 1991 ASME Computers in Engineering Conference, August, pp. 209-216.
32. Kirschman, C. F., and Jara-Almonte, C. C., 1992, “A Parallel Slicing Algorithm for Solid Freeform Fabrication Processes,” Solid Freeform Fabrication Symposium, H. L. Marcus, et al., Eds., University of Texas, Austin, August. pp. 26-33.
33. Dolenc, A., and Makela, I., 1994, “Slicing Procedures for Layered Manufacturing Techniques,” Comput.-Aided Des., 26, No. 2, February, pp. 119-126.
34. Tata, K., and Fadel, G., 1996, “Feature Extraction from Tessellated and Sliced Data in Layered Manufacturing,” Solid Freeform Fabrication Symposium H. L. Marcus et al., Eds., University of Texas, Austin, August, pp. 587-595.
35. Sabourin, E., Houser, S. A., and Bohn, J., 1996, “ Adaptive Slicing Using Stepwise Uniform Refinement,” Rapid Prototyp. J., 2, No. 4, pp. 20-26.
36. Kulkarni, P., and Dutta, D., 1996, “An Accurate Slicing Procedure for Layered Manufacturing,” Comput.-Aided Des., 28, No. 9, pp. 683-697.
37. Jamieson, Ron, and Hacker, Herbert, 1995, “Direct Slicing of CAD Models for Rapid Prototyping,” Rapid Prototyp. J., 1, No. 2, pp. 4-12.
38. Suh, Yong Seok, and Wozny, Michael J., 1993, “Adaptive Slicing for Solid Freeform Fabrication Processes.” Solid Freeform Fabrication Symposium, H. L. Marcus et al., Eds., University of Texas, Austin, August, pp. 404-410.
39. Guduri, S., Crawford, R. H., and Beaman, J. J., 1993, “Direct Generation of Contour Files from Constructive Solid Geometry Representations,” Solid Freeform Fabrication Symposium H. L. Marcus et al., eds., University of Texas, Austin, August, pp. 291-302.
40. Rajagopalan, M., Aziz, N. M., and Huey, Jr., C. O., 1995, “A Model for Interfacing Geometric Modeling Data with Rapid Phototyping Systems,” Adv. Eng. Softw., 23, pp. 89-96.
41. Farouki, R. T., and Konig, T., 1996, “Computational Methods for Rapid Phototyping of Analytic Solid Models,” Rapid Prototyp. J., 2, No. 3, pp. 41-49.
42. Kumar, V., Kulkarni P., and Dutta, D., 1998, “Adaptive Slicing of Heterogeneous Solid Models for Layered Manufacturing,” ASME-DETC, Computers in Engineering Conference, Atlanta.
43. Singh, P., and Dutta, D., 2000, “Multiple Direction Slicing for Layered Manufacturing,” Proceedings of ASME Design Automation Conference.
44. Chang, Wei-Ren, 1989, “CAD/CAM for the Selective Laser Sintering Process,” M. S. thesis, University of Texas, Austin, TX.
45. Chari, J. K., and Hall, J. L., 1993, “Robust Phototyping,” Solid Freeform Fabrication Symposium, 1993, H. L. Marcus et al., Eds., University of Texas, Austin, pp. 135-142.
46. Badrinarayan, B., and Barlow, J. W., 1995, “Effect of Processing Parameters in SLS of Metal-Polymer Powders,” Solid Freeform Fabrication Symposium, 1995, H. L. Marcus et al., Eds., University of Texas, Austin, pp. 55-63.
47. Agarwala, M. K., Bourell, D. L., Wu, B., and Beaman, J. J., 1993, “An Evaluation of the Mechanical Behavior of Bronze-Ni Composites Produced by Selective Laser Sintering,” Solid Freeform Fabrication Symposium, 1993, H. L. Marcus et al., Eds., University of Texas, Austin, pp. 193-203.
48. Fodran, Eric, Koch, Martin, and Menon, Unny, 1996, “Mechanical and Dimensional Characteristics of Fused Deposition Modeling Build Styles,” Solid Freeform Fabrication Symposium, 1996, D. L. Bourell et al., Eds., University of Texas, Austin, pp. 419-442.
49. Feldman, L. A., 1992, “Mechanical Testing of Laser-Cured Photopolymers for Multiple-Layer Structures,” J. Mater. Sci. Lett., 11, pp. 1231-1233.
50. Yardimci, A. M., Guceri, S. I., and Danforth, S. C., 1995, “A Phenomenological Numerical Model for Fused Deposition Processing of Particle Filled Parts,” Proceedings of the Solid Freeform Fabrication Symposium, The University of Texas, pp. 189-195.
51. Bleuth, J. L., andNarayan, S. H., 1996, “Residual Stress Driven Delamination in Deposited Multi-Layers,” Int. J. Solids Struct., 33, No. 1, pp. 65-78.
52. Krishnan, Ramaswami, Yamaguchi, Yasushi, and Prinz, Fritz, 1997, “Spatial Partitioning of Solids for Solid Freeform Fabrication,” Proceedings of the Fourth Symposium on Solid Modeling and Applications, Association for Computing Machinery, Atlanta, pp. 346-353.
53. Crawford, Richard H., 1993, “Computer Aspects of Solid Freeform Fabrication: Geometry, Process Control, and Design,” Solid Freeform Fabrication Symposium, 1993, H. L. Marcus et al., Eds., University of Texas, Austin, pp. 102-112.
54. Yang, Daniel C. H., Jou, Yungsen, Kong, Tom, and Chuang, Jui-Jen, 1995, “Laser Beam Diameter Compensation for Helisys LOM Machine,” Proceedings of the Sixth International Conference on Rapid Phototyping, R. P. Chart-off and A. J. Lightman, Eds., University of Dayton, pp. 171-178.
55. Chen, K., Crawford, R. H., and Beaman, J. J., 1996, “Parametric Representation of Part Contours in SLS Process,” Solid Freeform Fabrication Symposium, 1996, D. L. Bourell et al., Eds., University of Texas, Austin, pp. 597-608.
56. Farouki, R. T., Tarabanis, K., Korein, J. U., Batchelder, J. S., and Abrams, S. R. 1994, “Offset Curves in Layered Manufacturing,” Proceedings of the 1994 International Mechanical Engineering Congress and Exposition, PED Vol. 68-72, pp. 557-567.
57. Coquillart, S., 1987, “Computing 0ffsets of B-spline Curves,” Comput.-Aided Des., 19, No. 6, July/August, pp. 305-309.
58. Hope, R. L., Jacobs, P. A., and Roth, R. N., 1997, “Rapid Prototyping with Sloping Surfaces,” Rapid Prototyp. J., 3, No. 1, pp. 12-19.
59. de Jager, P. J., 1996, “Using Slanted and Ruled Layers for Rapid Phototyping,” Proceedings of the Fifth European Conference on Rapid Phototyping and Manufacturing, Helsinki, pp. 15-29.
60. Kulkarni, P., and Dutta, D., 1999, “Deposition Strategies and Resulting Part Stiffness in Layered Manufacturing,” ASME J. Manuf. Sci. Eng., pp. 93-103.
61. Qian, X., and Dutta, D., 1999, “Features Based Fabrication in Layered Manufacturing,” to appear in ASME J. Mech. Des.
62. Lynn, C. M., 1998, “Accuracy Models for SLA Build Style Decision Support,” Masters thesis, Georgia Institute of Technology.
63. Myers, R. H., and Montgomery, D. C., 1995, Response Surface Methodology: Process and Product Optimization Using Designed Experiments, Wiley, New York.
64. McClurkin, J., and Rosen, D. W., 1998, “Computer-aided Build Style Decision Support for Stereolithography,” Rapid Prototyp. J., 4, No. 1, pp. 4-13.
65. West, A. P., 1999, “A Decision Support System for Fabrication Process Planning in Stereolithography,” Masters thesis, Georgia Institute of Technology.
66. West, A. P., Sambu, S., and Rosen, D. W., 2001, “A Process Planning Method for Improving Build Performance in Stereolithography,” Comput.-Aided Des., 33, No. 1, pp. 65-80.
67. Mistree, F., Hughes, O. F., and Bras, B. A., 1993, “The Compromise Decision Support Problem and the Adaptive Linear Programming Algorithm,” Structural Optimization: Status and Promise, Washington, D.C., M. P. K., Ed., pp. 247-289.
68. Jacobs, P. F., 1992, Rapid Prototyping & Manufacturing, Fundamentals of Stereolithography, Society of Manufacturing Engineers.
69. National Center for Manufacturing Sciences (NCMS), 1998, “The Road to Manufacturing,” 1998 Industrial Roadmap for the Rapid Phototyping Industry, Rapid Phototyping Technology Advancement II Program, NCMS Report 0199RE98, Ann Arbor, MI.
70. Jurrens, Kevin K., 1999, “Standards for the Rapid Phototyping Industry,” Rapid Prototyp. J., 5, No. 4, pp. 169-178.
71. Patil, L., Dutta, D., Bhatt, A. D., Lyons, K., Jurrens, K., Pratt, M. J., and Sriram, R. D., 2000, “Representation of heterogeneous objects in IS0 10303 (STEP),” ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida.
72. Qian, X., and Dutta, D., 1998, “An Architecture for Interoperability of Layered Manufacturing Data,” ASME-DETC, Computers in Engineering Conference, Atlanta.
73. Diez, J., Kataria, A., Wang, H., Ebert-Uphoff, I., and Rosen, D. W., 2000, “RAPITR0NICS-on the Potential of Rapid Phototyping Technology to Fabricate Mechatronic Systems,” submitted to IEEE/ASME Transactions on Mechatronics.
74. Laliberte, T., Gosselin, C. M., and et Cote, G., 1999, “Rapid Phototyping of Mechanisms,” Tenth World Congress on the Theory of Machines and Mechanisms, pp. 959-964, Oulu, Finland, 20-24.
75. Alam, M., Mavroidis, C., Langrana, N., and Bidaud, P., 1999, “Mechanism Design Using Rapid Phototyping,” Tenth World Congress on the Theory of Machines and Mechanisms, Oulu, Finland, 20-24.
76. Binnard, M., 1999, Design by Composition for Rapid Phototyping, 1st Ed., Kluwer Academic, Dordrecht.
77. Kataria, A., and Rosen, D. W., 2000, “Building Around Inserts: Methods for Fabricating Complex Devices in Stereolithography,” ASME Mechanisms Conference, paper #DETC00/MECH-14206, Baltimore.
78. Goldfarb, M., and Speich, J. E., 1999, “A Well-Behaved Revolute Flexure Joint for Compliant Mechanism Design,” ASME J. Mech. Des., 121, pp. 424-429.
79. Canfield, S., and Frecker, M. I., 1999, “Design of Compliant Mechanisms for Amplification of Induced Strain Actuators,” Proceedings ASME Design Automation Conference, paper #DETC99/DAC-8602, Las Vegas, NV.
80. Mazumder, J., Schiffer, A., and Choi, J., 1999, “Direct Material Deposition: Designed Maco and Microstucture,” J. of Materials Research Innovation, Springer Verlag, 3, pp. 118-131.