Automobile exhaust emission control by catalysts

Current Opinion in Solid State and Materials Science

Volumn 4, Issue 1, 1999, Pages 97-102

  Belton, David N ^a   Taylor, Kathleen C ^a  

^a GENERAL MOTORS CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0002550412     PISSN: 13590286     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-0286(99)80017-5     Document Type: Article

References (103)

1. Becker E, Watson R: Future trends in automotive emission control. SAE Paper No. 980413. Warrendale, PA: Society of Automotive Engineers; 1998.
2. Williamson W, Denison G, Starin G, Robota H: Palladium-rhodium catalyst strategies for LEV emission applications. SAE Paper No. 972844. Warrendale, PA: Society of Automotive Engineers; 1997.
3. Anderson P, Rieck J: Advances in Pd containing three way catalyst activity. SAE Paper No. 970739. Warrendale, PA: Society of Automotive Engineers; 1997.
4. Taniguchi S, Yoskikawa T, Horiuchi M, Lidner D, Mussman L, Jenkin M: New low cost and high performance catalyst-single layer Pd/Rh catalyst development. SAE Paper No. 980667. Warrendale, PA: Society of Automotive Engineers; 1998.
5. Waltner A, Loose G, Hirschmann A, Mussmann L, Lindner D, Muller W: Development of close-coupled catalyst systems for European driving conditions. SAE Paper No. 980663. Warrendale, PA: Society of Automotive Engineers; 1998.
6. Gulati S, Jones L, Brady M, Baker R, Kessler B, Zammitt M, Snider B, Rajadurai S: Advanced three-way converter system for high temperature exhaust aftertreatment. SAE Paper No. 970265. Warrendale, PA: Society of Automotive Engineers; 1997.
7. Tagliaferri S, Koppel R, Baiker A: Influence of rhodium- and ceria-promotion of automotive palladium catalyst on its catalytic behavior under steady-state and dynamic operation. Appl Catal B 1998, 15:159-177.
8. Rogemond E, Frety R, Perrichon V, Primet M, Chevrier M, Gauthier C, Mathis F: Evolution of the ceria surface area of Pt-Rh ceria-alumina catalysts submitted to hydrothermal aging at 1273K. Appl Catal A 1997, 156:253-265.
9. More K, Kenik E, Coffey D, Geer T, LaBarge W, Beckmeyer R, Theis J: Thermally-induced microstructural changes in a three-way automotive catalyst. SAE Paper No. 972905. Warrendale, PA: Society of Automotive Engineers; 1997.
10. Fiedorow R, Wanke S: Effect of γ-alumina crystallinity on the state of rhodium during high-temperature treatments in oxygen and hydrogen. Appl Catal B 1997, 14:249-259.
11. Zhang G, Hirota T, Hosokawa U, Muraki M: Thermally stable Pt/Rh catalysts. SAE Paper No. 972909. Warrendale, PA: Society of Automotive Engineers; 1997.
12. 2 system. Appl Catal B 1998, 16:105-117.
13. Bunluesin T, Gorte R, Graham G: CO oxidation for the characterization of reducibility in oxygen storage components of three-way automotive catalysts. Appl Catal B 1997, 14:105-115.
14. Meeyoo V, Trimm D, Cant N: The effect of sulphur containing pollutants on the oxidation activity of precious metals used in vehicle exhaust catalysts. Appl Catal B 1998, 16:L101-L104.
15. Thoss J, Rieck J, Bennett CJ: The impact of fuel sulfur level on FTP emissions-effect of PGM type. SAE Paper No. 970737. Warrendale, PA: Society of Automotive Engineers; 1997.
16. 4). Appl Catal B 1997, 14:161-173.
17. Putna E, Shereck B, Gorte R: Adsorption and reactivity of lanthana With CO. Appl Catal B 1998, 17:101-106.
18. 2 catalysts. Influence of the reduction/reoxidation conditions. Appl Catal B 1998, 16:127-138.
19. Weng-Sieh Z, Gronsky R, Bell A: Effects of support interaction on the phase stability of Rh oxides formed during the aging of γ-alumina supported Rh in air. J Catal 1998, 174:22-33.
20. 3 prepared by sol-gel method. Appl Catal B 1998, 17:221-231.
21. Castillo S, Moran-Pineda M, Molina V, Lopez T: Catalytic reduction of nitric oxide on Pt and Rh catalysts supported on alumina and titania synthesized by the sol-gel method. Appl Catal B 1998, 15:203-209.
22. Hu Z, Allen F, Wan C, Heck R, Steger J, Lakis R, Lyman C: Performance and structure of Pt-Rh three-way catalysts: mechanism for Pt/Rh synergism. J Catal 1998, 174:13-21.
23. 2. J Catal 1997, 171:358-373.
24. Granger P, Dathy C, Lecomete J, Leclercq L, Prigent M, Mabilon G, Leclercq G: Kinetics of the NO and CO reaction over platinum catalysts. J Catal 1998, 173:304-314.
25. Granger P, Lecomte J, Dathy C, Leclercq G: Kinetics of the CO+NO reaction over rhodium and platinum-rhodium on alumina. J Catal 1998, 175:194-203.
26. 3 under net-oxidizing conditions. J Catal 1998, 173:95-104.
27. 2 over Rh(111). Catal Lett 1997, 47:5-15.
28. 4 hydrocarbons on platinum in the presence of oxygen: influence of sulfur dioxide. J Catal 1998, 172:3-12.
29. Bazin P, Saur O, Lavalley J, Blanchard G, Visciglio V, Touret O: Influence of platinum on ceria sulfation. Appl Catal B 1997, 13:265-275.
30. Fernandez-Garcia M, Rebollo E, Ruiz A, Conesa J, Soria J: Influence of ceria on the dispersion and reduction/oxidation behaviour of alumina-supported copper catalysts. J Catal 1997, 172:146-159.
31. 4-(x = 0.00-1.50) perovskite-type oxides. Appl Catal A 1997, 165:73-85.
32. 2 and CO-NO. Appl Catal B 1998, 17:233-244.
33. Zhou R-X, Jiang X-Y, Mao J-X, Zheng X-M: Oxidation of carbon monoxide catalyzed by copper-zirconium composite oxides. Appl Catal A 1997, 162:213-222.
34. Wu H, Yang S, Wang A, Kao H: Emission control technologies for 50 and 125 cc motorcycles in Taiwan. SAE Paper No. 980938. Warrendale, PA: Society of Automotive Engineers; 1998.
35. Ballinger T, Manning W, Lafyatis D: Hydrocarbon trap technology for the reduction of cold-start hydrocarbon emissions. SAE Paper No. 970741. Warrendale, PA: Society of Automotive Engineers; 1997.
36. Silver R, Dou D, Kirby C, Richmond R, Balland J, Dunne S: A durable in-line hydrocarbon adsorber for reduced cold start exhaust emissions. SAE Paper No. 972843. Warrendale, PA: Society of Automotive Engineers; 1997.
37. Noda N, Takahaski A, Mizuno H: In-line hydrocarbon adsorber system for cold start emissions. SAE Paper No. 970266. Warrendale, PA: Society of Automotive Engineers; 1997.
38. Buhrmaster C, Locker R, Patil M, Nagel J, Socha L: Evaluation of inline adsorber technology. SAE Paper No. 972843. Warrendale, PA: Society of Automotive Engineers; 1997.
39. Noda N, Takahaski A, Shibagaki Y, Mizuno H: In-line adsorber technology for cold start emissions - part II. SAE Paper No. 980423. Warrendale, PA: Society of Automotive Engineers; 1998.
40. Abthoff J, Kemmler R, Klein H, Matt M, Robota H, Wolsing W, Wiehl J, Dunne S: Application of in-line hydrocarbon adsorber systems. SAE Paper No. 980422. Warrendale, PA: Society of Automotive Engineers; 1998.
41. Patil M, Peng Y, Morse K: Airless In-line hydrocarbon adsorber system for reducing cold start HC emissions. SAE Paper No. 980419. Warrendale, PA: Society of Automotive Engineers; 1998.
42. Lafyatis D, Ballinger T, Lammey G, Frost J: Ambient temperature light-off aftertreatment system for meeting ULEV emission standards. SAE Paper No. 980421. Warrendale, PA: Society of Automotive Engineers; 1998.
43. x reduction catalyst for gasoline lean-burn engines. SAE Paper No. 972850. Warrendale, PA: Society of Automotive Engineers; 1997.
44. x catalysts. SAE Paper No. 980930. Warrendale, PA: Society of Automotive Engineers; 1998.
45. x reduction in SI engine exhaust using selective catalytic reduction technique. SAE Paper No. 980935. Warrendale, PA: Society of Automotive Engineers; 1998.
46. x reduction over Pd/ZSM-5 catalysts. Appl Catal B 1997, 14:1-11.
47. 2 on Cu-ZSM-5. Appl Catal B 1997, 14:147-159.
48. 4 over Cu/ZSM-5: influences of oxygen partial pressure and incorporated rhodia. Appl Catal B 1998, 15:275-289.
49. x reduction with propane over Cu/ZSM-5 catalysts (by ESR, TPD, and IR-spectroscopy in situ). J Catal 1997, 171:245-254.
50. 3 solids during redox treatments. Correlation with the selective reduction of nitric oxide by hydrocarbons. Appl Catal B 1998, 16:359-374.
51. Henriques C, Ribeiro M, Abreu C, Murphy D, Prohnant F, Saussey J, Lavalley J: An FT-IR study of NO adsorption over Cu-exchanged MFI catalysts: effect of Si/Al ratio, copper loading and catalyst pre-treatment. Appl Catal B 1998, 16:79-95.
52. 3-. Appl Catal B 1998, 16:245-254.
53. Liese T, Grunert W: Cu-Na-ZSM-5 catalysts prepared by chemical transport: investigations on the role of Bronsted acidity and of excess copper in the selective catalytic reduction of NO by propene. J Catal 1997, 172:34-45.
54. Maunula T, Kintaichi Y, Inaba M, Haneda M, Sato K, Hamada H: Enhanced activity of In and Ga-supported sol-gel alumina catalysts for NO reduction by hydrocarbons in lean conditions. Appl Catal B 1998, 15:291-304.
55. Shichi A, Satsuma A, Iwase M, Shimizu K, Komai S, Hattori T: Catalyst effectiveness factor of cobalt-exchanged mordenites for the selective reduction of NO with hydrocarbons. Appl Catal B 1998, 17:107-113.
56. 2-TPR studies for characterisation of CuMOR catalysts The role of Si/Al ratio, copper content and cocation. Appl Catal B 1997, 14:261-272.
57. x and diesel soot particulate. Appl Catal B 1998, 16:149-154.
58. Wang C-B, Chang J-G, Wu R-C, Yeh C-T: Promotion effect of coating alumina supported palladium with sodium hydroxide on the catalytic conversion of nitric oxide. Appl Catal B 1998, 17:51-62.
59. Tanaka T, Yokota K, Isomura N, Doi H, Sugiura M: Effect of the addition of Mo and Na to Pt catalysts on the reduction of NO. Appl Catal B 1998, 16:199-208.
60. 3 catalysts. Appl Catal B 1998, 16:319-326.
61. Iwamoto M, Zengyo T, Hernandez A, Araki H: Intermediate addition of reductant between an oxidation and a reduction catalyst for highly selective reduction of NO in excess oxygen. Appl Catal B 1998, 17:259-266.
62. Pophal C, Yogo T, Yanada K, Segawa K: Selective reduction of nitrous oxide over Fe-MFI in the presence of propene as reductant. Appl Catal B 1998, 16:177-186.
63. 3 catalysts. Appl Catal B 1997, 14:189-202.
64. 6. J Catal 1997, 172:93-102.
65. Torre-Abreu C, Ribeiro M, Henriques C, Ribeiro F: Copper-exchanged mordenites as active catalysts for NO selective catalytic reduction by propene under oxidising conditions: effect of Si/Al ratio, copper content and Bronsted acidity. Appl Catal B 1997, 13:251-264.
66. Amiridis M, Roberts K, Periera C: The selective reduction of NO by propylene over Pt supported dealuminated Y zeolite. Appl Catal B 1997, 14:203-209.
67. 2 without formation of harmful by-products. Appl Catal B 1998, 16:155-164.
68. Miyadera T: Selective reduction of nitric oxide with ethanol over an alumina-supported silver catalyst. Appl Catal B 1997, 13:157-165.
69. 3 under lean-burn conditions. J Catal 1998, 176:204-214.
70. Delahay G, Ensuque E, Coq B, Figueras F: Selective catalytic reduction of nitric oxide by n-decane on Cu/sulfated-zirconia catalyst in oxygen rich atmosphere. J Catal 1998, 175:7-15.
71. 8 as reductants. Appl Catal B 1998, 17:115-129.
72. 2 over perovskite-like mixed oxides. Appl Catal B 1998, 16:339-345.
73. Burch R, Ottery D: The selective reduction of nitrogen oxides by higher hydrocarbons on Pt catalysts under lean-burn conditions. Appl Catal B 1997, 13:105-111.
74. 3 under lean-burn conditions. Appl Catal B 1998, 17:131-139.
75. Brogan M, Clark A, Brisley R: Recent progress in NOx trap technology. SAE Paper No. 980933. Warrendale, PA: Society of Automotive Engineers; 1998.
76. x storage reduction system. SAE Paper No. 980932. Warrendale, PA: Society of Automotive Engineers; 1998.
77. Kisenyi J, Cumming B, Stark R, Marshall R, Gibbons E, Hoost T, Webb D: Correlation between dyanamometer- and vehicle-aged catalysts for automotive lean burn applications. SAE Paper No. 980934. Warrendale, PA: Society of Automotive Engineers; 1998.
78. x adsorber catalysts. SAE Paper No. 972845. Warrendale, PA: Society of Automotive Engineers; 1997.
79. x storage catalysts for lean burn gasoline fueled passenger cars. SAE Paper No. 970746. Warrendale, PA: Society of Automotive Engineers; 1997.
80. x trap reaction by thermodynamic calculation. SAE Paper No. 970745. Warrendale, PA: Society of Automotive Engineers; 1997.
81. 3. Appl Catal B 1998, 16:69-77.
82. Shinjoh H, Takahashi N, Yokota K, Sugiura M: Effect of periodic operation over Pt catalysts in simulated oxidizing exhaust gas. Appl Catal B 1998, 15:189-201.
83. Yang R, Li W, Chen N: Reversible chemisorption of nitric oxide in the presence of oxygen on titania and titania modified with surface sulfate. Appl Catal A 1998, 169:215-225.
84. y and Ce-ZSM-5. Appl Catal B 1998, 13:141-149.
85. Cant N, Angove D, Chambers D: Nitrous oxide formation during the reaction of simulated exhaust streams over rhodium, platinum and palladium catalysts. Appl Catal B 1998, 17:63-73.
86. 3 catalysts. Appl Catal B 1998, 16:291-301.
87. Lampert J, Kazi M, Farrauto R: Palladium catalyst performance for methane emissions abatement from lean burn natural gas vehicles. Appl Catal B 1997, 14:211-223.
88. 4 studied by EXAFS/XANES. Appl Catal B 1997, 14:13-22.
89. Li Z, Flytzani-Stephanopoulos M: Selective catalytic reduction of nitric oxide by methane over cerium and silver ion-exchanged ZSM-5 zeolites. Appl Catal A 1997, 165:15-34.
90. 3. Appl Catal B 1997, 14:175-188.
91. 3. Appl Catal B 1998, 17:183-193.
92. Descorme C, Gelin P, Lecuyer C, Primet M: Palladium-exchanged MFI-type zeolites in the catalytic reduction of nitrogen monoxide by methane Influence of the Si/Al ratio on the activity and the hydrothermal stability. Appl Catal B 1997, 13:185-195.
93. In C, Kim S, Kim C, Cho W: Catalyst technologies satisfying low emission of natural gas vehicle. SAE Paper No. 970744. Warrendale, PA: Society of Automotive Engineers; 1997.
94. Walsh M: Global trends in diesel emissions control - a 1998 update. SAE Paper No. 980186. Warrendale, PA: Society of Automotive Engineers; 1998.
95. x control in heavy duty diesel engines - what is the limit? SAE Paper No. 980174. Warrendale, PA: Society of Automotive Engineers; 1998.
96. Yoro K, Itsuaki S, Saito J, Nakajima S, Okamoto S: Diesel particulate filter made of porous metal. SAE Paper No. 980187. Warrendale, PA: Society of Automotive Engineers; 1998.
97. Smith A, Tidmarsh D, Lattke B: The efficiency of an oxidation catalyst fitted to a modern high speed diesel engine running under steady state conditions. SAE Paper No. 980192. Warrendale, PA: Society of Automotive Engineers; 1998.
98. Klein H, Lox E, Kreuzer T, Kawanami M, Ried T, Bachmann K: Diesel particulate emissions of passenger cars - new insights into structural changes during the process of exhaust aftertreatment using diesel oxidation catalysts. SAE Paper No. 980196. Warrendale, PA: Society of Automotive Engineers; 1998.
99. Blackwood A, Tidmarsh D, Willcock M: The effect of an oxidation catalyst on cold start diesel emissions in the first 120 seconds of running. SAE Paper No. 980193. Warrendale, PA: Society of Automotive Engineers; 1998.
100. Querini C, Ulla M, Requejo F, Soria J, Sedran U, Miro E: Catalytic combustion of diesel soot particles. Activity and characterization of Co/MgO and Co,K/MgO catalysts. Appl Catal B 1998, 15:5-19.
101. Ueno H, Furutani T, Nagami T, Aono N, Goshima H, Kasahara K: Development of catalyst for diesel engine. SAE Paper No. 980195. Warrendale, PA: Society of Automotive Engineers; 1998.
102. Katoh K, Kosaki Y, Watanabe T, Funabiki M: Compatibility of NOx and PM abatement in diesel catalysts. SAE Paper No. 980931. Warrendale, PA: Society of Automotive Engineers; 1998.
103. x reduction on a passenger car diesel common rail engine. SAE Paper No. 980191. Warrendale, PA: Society of Automotive Engineers; 1998.