Representing the effect of crystallographic texture on the anisotropic performance behavior of rolled aluminum plate

Journal of Engineering Materials and Technology, Transactions of the ASME

Volumn 122, Issue 1, 2000, Pages 10-17

  Miller, M P ^a   Barton, N R ^a  

^a School of Operations Research and Industrial Engineering   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0002450581     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.482759     Document Type: Article

References (49)

1. Asaro, R. J., and Needleman, A., 1985, “Texture Development and Strain Hardening in Rate Dependent Polycrystals,” Acta Metall., Vol. 33, pp. 923-953.
2. Barlat, F., 1987, “Crystallographic Texture, Anisotropic Yield Surfaces and Forming Limits of Sheet Metals,” Materials Science and Engineering, Vol. 91, pp. 55-72.
3. Barlat, F., Liu, J., and Weiland, H., 1996, “On Precipitate-Induced Anisotropy Modeling in Binary Al-Cu Alloys,” Mat. Sci. Forum, Vols. 217-222, pp. 635-640.
4. Barton, N., Dawson, P. R., and Miller, M. P., 1999, “Yield Strength Asymmetry Predictions from Polycrystal Elastoplasticity,” ASME Journal of Engineering Materials and Technology, (in press).
5. Bate, P., Roberts, W. T., and Wilson, D. V., 1981, “The Plastic Anisotropy of Two-Phase Aluminum Alloys-I. Anisotropy in Unidirectional Deformation,” Acta Met., Vol. 29, pp. 1797-1814.
6. Baudin, T., and Penelle, 1993, “Determination of the Total Texture Function from Individual Orientation Measurements by Electron Backscattering Pattern,” Met. Trans. A, Vol. 24A, pp. 2299-2311.
7. Beaudoin, A. J., Dawson, P. R., Mathur, K. K., and Kocks, U. F., 1995a, “A Hybrid Finite Element Formulation for Polycrystal Plasticity with Consideration of Macro-structural and Microstructural Linking,” Int. J. Plasticity, Vol. 11, 501-521.
8. Beaudoin, A. J., Mecking, H., and Kocks, U. F., 1995b, “Development of local shear bands and orientation gradients,” Simulation of Materials Processing: Theory, Methods, and Applications, Shen and Dawson, eds., pp. 225-230, Balkema, Rotterdam.
9. Becker, S., and Panchanadeeswaran, S., 1989, “Crystal Rotations Represented as Rodriquez Vectors,” Textures and Microstructures, Vol. 10, pp. 167-194.
10. Cailletaud, G., 1992, “a Micromechanical Approach to Inelastic Behavior of Metals,” Int. J. Plas., Vol. 8, pp. 55-73.
11. Czyzak, S. J., Bow, N., and Payne, H., 1961, “On the Tensile Stress-Strain Relation and the Bauschinger Effect for Polycrystalline Materials From Taylor’s Model,” J. Mech. Phys. Solids, Vol. 9, pp. 63-66.
12. Dawson, P. R., Beaudoin, A. J., and Mathur, K. K., 1994, “Finite Element Modeling of Polycrystalline Solids,” Numerical Predictions of Deformation Processes and the Behaviour of Real Materials, Anderson et al., eds., Riso National Laboratory, Roskilde, Denmark, pp. 33-43.
13. Feyel, F., Calloch, S., Marquis, D., and Cailletaud, G., 1997, “F. E. Computation of a Triaxial Specimen Using a Polycrystalline Model,” Comp. Mat. Sci., Vol. 9, pp. 141-157.
14. Frank, F. C., 1988, “Orientation Mapping,” Met. Trans. A., Vol. 19A, pp. 403-408.
15. Hansen, N., and Juul Jensen, J., 1992, “Flow Stress Anisotropy Caused by Geometrically Necessary Boundaries,” Acta Metallurgica et Materiala, Vol. 40, pp. 3265-3275.
16. Harvey, S. J., 1985, “The Use of Anisotropic Yield Surfaces in Cyclic Plasticity,” Multiaxial Fatigue, ASTM STP 853, ASTM, Philadelphia, PA, 1985, pp. 49-53.
17. Harren, S. V., and Asaro, R. J., 1989, “Nonuniform Deformations in Polycrystals and Aspects of the Validity of the Taylor Theory,” J. Mech. Phys. Solids, Vol. 37, pp. 191-232.
18. Hatch, J. E. (ed.), 1984, Aluminum: Properties and Physical Metallurgy, American Society for Metals, Metals Park, Ohio, pp. 376-377.
19. Havlicek, F., Tokuda, M., Hino, S., and Kratochvil, J., 1992, “Finite Element Method Analysis of Micro-Macro Transition in Polycrystalline Plasticity,” Int. J. Plasticity, Vol. 8, pp. 477-499.
20. Hill, R., 1948, “A Theory of the Yield and Plastic Flow of Anisotropic Metals,” Proc. Roy. Soc. (London), Series A193, pp. 281-297.
21. Hosford, W. F., and Zeisloft, R. H., 1972, “The Anisotropy of Age-Hardened Al-4 Pct Cu Single Crystals During Plain-Strain Compression,” Met. Trans., Vol. 3, pp. 113-147.
22. Hutchinson, J. W., 1964a, “Plastic Stress-Strain Relations of FCC Polycrystalline Metals Hardening According to Taylor’s Rule,” J. Mech. Phys. Solids, Vol. 12, pp. 11-24.
23. Hutchinson, J. W., 1964b, “Plastic Deformation of BCC Polycrystals,” J. Mech. Phys. Solids, Vol. 12, pp. 25-33.
24. Iwakuma, T., and Nemat-Nasser, S., 1984, “Finite Elastic-Plastic Deformation of Polycrystalline Metals,” Proc. Royal Soc. (London), Series A394, pp. 87-119.
25. Juul Jensen, D., and Hansen, N., 1990, “Flow Stress Anisotropy in Aluminum,” Acta Metallurgica et Materiala, Vol. 38, No. 8, 1369-1380.
26. Karafillis, A. P., and Boyce, M. C., 1993, “General Anisotropic Yield Criterion Using Bounds and a Transformation Weighting Tensor,” J. Mech. Phys. Sol., Vol. 41, No. 12, pp. 1859-1886.
27. Kallend, J. S., Kocks, U. F., Rollett, A. D., and Wend, H., 1991, “Operational Texture Analysis,” Mater. Sci. and Eng., Vol. A132, pp. 1-11.
28. Kocks, U. F., 1987, “Constitutive Behavior Based on Crystal Plasticity,” Unified Constitutive Equations for Plastic Deformation and Creep of Engineering Alloys, A. K. Miller, ed., pp. 1-88. Elsevier Applied Science.
29. Kocks, U. F., Tome, C. N., and Wenk, H.-R., 1998, Texture and Anisotropy, Cambridge University Press, Cambridge, p. 365 ff.
30. Lebensohn, R. A., and Tome, C. N., 1994, “A Self-Consistent Viscoplastic Model: Prediction of Rolling Textures of Anisotropic Polycrystals,” Mater. Sci. and Eng., Vol. A175, pp. 71-82.
31. Lin, H., and Nayeb-Hashemi, H., 1993, “Effects of Material Anisotropy on Cyclic Deformation and Biaxial Fatigue Behavior of Al-6061 T6,” Advances in Multiaxial Fatigue, ASTM STP 191, McDowell and Ellis, eds., ASTM, Philadelphia, pp. 151-182.
32. Lipinski, P., and Berveiller, M., 1989, “Elastoplasticity of Micro-Inhomogeneous Metals at Large Strain,” Int. J. Plas., Vol. 5, pp. 149-172.
33. Marin, E. B., and Dawson, P. R., 1998, “On Modeling the Elasto-Viscoplastic Response of Metals Using Polycrystal Plasticity,” Comp. Methods Appl. Mech. and Eng., Vol. 165, pp. 1-21.
34. Mathur, K. K., and Dawson, P. R., 1989, “On Modeling the Development of Crystallographic Texture in Bulk Forming Processes,” Int. J. Plas., Vol. 5, pp. 67-94.
35. Mathur, K. K., Dawson, P. R., and Kocks, U. F., 1990, “On modeling anisotropy in deformation processes involving polycrystals with distorted grain shapes,” Mech. Mater., Vol. 10, pp. 183-202.
36. McHugh, P. E., Varias, A. G., Asaro, R. J., and Shih, C. F., 1989, “Computational Modeling of Microstructures,” Future Gen. Comp. Sys., Vol. 5, pp. 295-318.
37. Mika, D. P., and Dawson, P. R., 1998, “Effects of Grain Interaction on Deformation in Polycrystals,” Mat. Sci. Engr., Vol. A257, pp. 62-76.
38. Mika, D. P., and Dawson, P. R., 1999, “Polycrystal Plasticity Modeling of Intracrystalline Boundary Textures,” Acta Mat., in press.
39. Miller, M. P., and Dawson, P. R., 1997, “Influence of Slip System Hardening Assumptions on Modeling Stress Dependence of Work Hardening,” Jour. Mech. Phys. of Solids, Vol. 45, pp. 1781-1804.
40. Miller, M. P., and Turner, T. J., 1999, “Quantification and Representation of Crystallographic Texture Fields in Processed Alloys,” accepted for publication, Int. J. Plas.
41. Mitchell, M. R., 1978, “Fundamentals of Modern Fatigue Analysis for Design,” Fatigue and Microstructure, M. Meshi, ed., pp. 385-438.
42. Molinari, A., Canova, G. R., and Ahzi, S., 1987, “A Self Consistent Approach of the Large Deformation Polycrystal Viscoplasticity,” Acta Metall., Vol. 35, No. 123, pp. 2983-2994.
43. Molinari, A., Ahzi, S., and Kouddane, R., 1997, “On the Self-Consistent Modeling of Elastic-Plastic Behavior of Polycrystals,” Mech. of Mat., Vol. 26, pp. 43-62.
44. Sachs, G., 1928, “Zur Ableitung Einer Fliessbedingung,” A. Ver. dt. Ing., Vol. 12, pp. 134-136.
45. Stout, M. G., Hecker, S. S., and Bourcier, R., 1983, “An Evaluation of Anisotropic Effective Stress-Strain Criteria for the Yield and Flow of 2024 Aluminum Tubes,” ASME Journal of Engineering Materials and Technology, Vol. 105, pp. 242-249.
46. Taylor, G. I., 1938, “Plastic Strain in Metals,” J. Inst. Met., Vol. 62, pp. 307-324.
47. Wright, S. I., and Adams, B. L., 1990, “An Evaluation of the Single Orientation Method for Texture Determination in Materials of Moderate Texture Strength,” Textures and Microstructures, Vol. 12, pp. 65-76.
48. Wright, S. I., and Kocks, U. F., 1996, “A Comparison of Different Texture Analysis Techniques,” Proceedings of the Eleventh International Conference on Textures of Materials, Liang, Zuo, and Chu, eds., The Metallurgical Society, pp. 53-62.
49. Zouhal, N., Molinari, A., and Toth, L. S., 1996, “Elastic-Plastic Effects During Cyclic Loading as Predicted by the Taylor-Lin Model of Polycrystal Viscoplasticity,” Int. J. Plas., Vol. 12, No. 3, pp. 343-360.