Structural ceramic composites

Current Opinion in Solid State and Materials Science

Volumn 4, Issue 5, 1999, Pages 445-451

  Kerans, Ronald J ^a   Hay, Randall S ^a   Parthasarathy, Triplicane A ^a  

^a AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0001463835     PISSN: 13590286     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-0286(99)00046-7     Document Type: Article

References (62)

1. Wilson M. Statistical tensile strength of Nextel 610 and Nextel 720 fibres. J. Mat. Sci. 32:1997;2535-2542. Good review and discussion of Nextel fiber properties.
2. Hay RS, Boakye EE, Petry MD, Berta Y, Von Lehmden K, Welch J. Grain growth and tensile strength of 3M Nextel 720 after thermal exposure. Ceram Eng Sci Proc 1999;20, in press. Presents data and suggests three regimes governing strength after thermal exposure: (1) environmental (low T); (2) flaw healing (intermediate T); (3) correlated with but not necessarily caused by grain growth (high T).
3. Goldsby J.C., Yun H.M., Morscher G.N., DiCarlo J.A. Annealing effects on creep of polycrystalline alumina-based fibers. Mat. Sci. Eng. A. 242:1998;278-283.
4. Wilson D.M., Lieder S.L., Lunenburg D.C. Microstructure and high temperature properties of Nextel 720 fibers. Cer. Eng. Sci. Proc. 16:(5):1995;1005-1014.
5. Campbell S., Leone E., McNallan M. The effect of processing parameters on the surface nitridation of Nextel™ 312 ceramic. Cer. Eng. Sci. Proc. 18:(4):1997;391-398.
6. Wakai F., Nagano T., Iga T. Hardening in creep of alumina by zirconium segregation at the grain boundary. J. Am. Ceram. Soc. 80:(9):1997;2361-2366.
7. Cho J., Harmer M.P., Chan H.M., Rickman J.M., Thompson A.M. Effect of yttrium and lanthanum on the tensile creep behavior of aluminum oxide. J. Am. Ceram. Soc. 80:(4):1997;1013-1017. Attributes reduced creep to boundary segregation.
8. Gulgun M.A., Putlayev V., Ruhle M. Effects of yttrium doping alpha-alumina. I. Microstructure and microchemistry. J. Am. Ceram. Soc. 82:(7):1999;1849-1856. Differs with [7]; attributes reduced creep to intergranular precipitation.
9. Boakye E., Hay R.S., Petry M.D. Continuous coating of oxide fiber tows using liquid precursors: Monazite coatings on Nextel 720. J Am Ceram Soc. 82:(9):1999;2321-2331. Shows that coated fiber strength is related to coating precursor chemistry.
10. 4. J Eur Ceram Soc. 19:(13-14):1999;2421-2426.
11. Romoscanu A. Topography characterization of alumina-mullite fibers using atomic force microscopy and relationship to mechanical properties. Materials Science. 1998;114 University of Pennsylvania, Philadelphia.
12. Morscher G.N., Chen K.C., Mazdiyasni K.S. Creep resistance of developmental polycrystalline yttrium-aluminum garnet fibers. Cer. Eng. Sci. Proc. 15:(4):1994;181-188.
13. Liu Y., Zhang Z.-F., Halloran J., Laine R.M. Yttrium aluminum garnet fibers from metallorganic precursors. J. Am. Ceram. Soc. 81:(3):1998;629-645. A thorough discussion of YAG fiber processing.
14. 3-seeded boehmite-derived alumina. J. Am. Ceram. Soc. 76:(1):1993;214-222.
15. 3 synthesized from liquid precursors. J. Am. Ceram. Soc. 79:(7):1996;1745-1755.
16. Urano A., Sakamoto J., Takeda M., Imai Y., Araki H., Noda T. Microstructure and mechanical properties of SiC fiber 'Hi-Nicalon Type S' reinforced SiC composites. Ceram Eng Sci Proc. 19:(3):1998;55-63.
17. Berger M.-H., Hochet N., Bunsell A.R. Microstructure and high temperature mechanical behavior of new polymer derived SiC-based fibers. Cer. Eng. Sci. Proc. 19:(3):1998;39-46. Good review of the properties and microstructure of advanced SiC fibers.
18. Ishikawa T., Kohtoku Y., Kumagawa K., Yamamura T., Nagasawa T. High-strength alkali-resistant sintered SiC fibre stable to 2200°C. Nature. 391:1998;773-774. Discussion of Tyranno SA properties, including environmental effect.
19. Lipowitz J., Rabe J.A., Zangvil A., Xu Y. Structure and properties of sylramic silicon carbide fiber: A polycrystalline, stoichiometric, beta-SiC composition. Ceram. Eng. Sci. Proc. 18:(3):1997;147.
20. Sacks M.D., Scheiffele G.W., Zhang L., Yang Y., Brennan J.J. Polymer-derived SiC-based fibers with high tensile strength and improved creep resistance. Ceram. Eng. Sci. Proc. 19:(3):1998;73-86. Thorough discussion of SiC fiber processing and characterization.
21. Parthasarathy T.A., Folsom C.A., Zawada L.P. Combined effects of exposure to salt (NaCl) water and oxidation on the strength of uncoated and BN-coated Nicalon fibers. J. Am. Ceram. Soc. 81:(7):1998;1812-1818.
22. 3C fiber. These results should be controversial.
23. 4 system. J. Am. Ceram. Soc. 81:(4):1998;951-956. Shows that reaction between monazite and alumina only occur if monazite is off stoichiometry.
24. Morgan P.E.D., Marshall D.B. Ceramic composites of monazite and alumina. J. Am. Ceram. Soc. 78:(6):1995;1553-1563.
25. Keller K.A., Parthasarathy T.A., Mah T., Boakye E. Evaluation of monazite fiber coatings in dense matrix composites. Ceram Eng Sci Proc. 20:1999;. in press.
26. Parthasarathy TA, Boakye EE, Cinibulk MK, Petry DM. Fabrication and testing of oxide/oxide microcomposites with lanthanum phosphate and calcium hekaluminate as interlayers. J Am Ceram Soc, in press.
27. Kanazawa C, Johnson SM, Porter JR. Monazite coating promotes fiber pullout. J Am Ceram Soc 1997;80(7): back cover.
28. Kuo D.-H., Kriven W.M. Microstructure and mechanical evaluation of yttrium phosphate-containing and lanthanum phosphate-containing zirconia laminates. Ceram. Eng. Sci. Proc. 18:(4):1997;129-136.
29. Goettler R.W., Sambasivan S., Dravid V., Kim S. Interfaces in oxide fiber-oxide matrix ceramic composites. Pechenik A., Kalia R., Vashishta P. Computer aided design of high temperature materials. 1999;333-349 Oxford University Press.
30. Davis J.B., Marshall D.B., Housley R.M., Morgan P.E.D. Machinable ceramics containing rare-earth phosphates. J. Am. Ceram. Soc. 81:(8):1998;2169-2175. Reports that monazite and monazite-oxide mixtures can be drilled with tungsten carbide.
31. Lee W.Y., Lara-Curzio E., More K.L. Multilayered oxide interphase concept for ceramic-matrix composites. J. Am. Ceram. Soc. 81:(3):1998;717-720.
32. Cinibulk M.K. Effect of precursors and dopants on the synthesis and grain growth of calcium hexaluminate. J. Am. Ceram. Soc. 81:(12):1998;3157-3168. Good discussion of efforts to lower the formation temperature of hibonite.
33. Cinibulk M.K. Synthesis of calcium hexaluminate and lanthanum hexaluminate fiber coatings. Ceram. Eng. Sci. Proc. 19:(3):1998;27-35.
34. Sudre O., Molliex L. Alumina single-crystal fibre reinforced alumina matrix for combustor tiles. Ceram. Eng. Sci. Proc. 19:(4):1998;273-280.
35. Boakye E., Petry M.D., Hay R.S. Porous aluminum oxide and lanthanum phosphate fiber coatings. Cer. Eng. Sci. Proc. 17:(4):1996;53-60.
36. Opila E.J. Variation of the oxidation rate of silicon carbide with water-vapor pressure. J. Am. Ceram. Soc. 82:(3):1999;625-626. Shows a large increase in SiC oxidation kinetics in the presence of water.
37. Parthasarathy T.A., Folsom C.A., Zawada L.P. Combined effects of exposure to salt (NaCl) water and oxidation on the strength of uncoated and BN-coated Nicalon™ fibers. J. Am. Ceram. Soc. 81:(7):1998;1812-1818.
38. 2 scale volatility under combustion conditions. I. Experimental results and empirical model. J. Am. Ceram. Soc. 82:(7):1999;1817-1825. Shows that Si-containing material may easily be degraded by recession in combustion environments at 1200-1400°C.
39. Lee K.A. Contamination effects on interfacial porosity during cyclic oxidation of mullite-coated silicon carbide. J. Am. Ceram. Soc. 81:(12):1998;3329-3332.
40. Morscher G.N., Gyekenyesi J.Z., Bhatt R.T. Damage accumulation in woven SiC/SiC composites. Jenkins M.G. Environmental, mechanical, and thermal properties and performance of continuous fiber ceramic composites (CFCC) materials and components, ASTM STP 1392. 1999;American Society for Testing and Materials, West Conshohocken, PA. Good analysis of early damage development and related degradation in several SiC/BN/SiC systems.
41. Jacobson N., Farmer S. High-temperature oxidation of boron nitride. I. Monolithic boron nitride. J. Am. Ceram. Soc. 82:(2):1999;393-398.
42. Jacobson N.S., Morscher G.N. High-temperature oxidation of boron nitride. II. Boron nitride layers in composites. J. Am. Ceram. Soc. 82:(6):1999;1473-1482. Extensive study of BN layer oxidation that demonstrates great increase in kinetics in the presence of water vapor.
43. More K.L., Ailey K.S., Lowden R.A., Lin H.T. Evaluating the effect of oxygen content in BN interfacial coatings on the stability of SiC/BN/SiC composites. Composites, Part A. 30:1999;463-470. Thorough characterization of an important impurity effect.
44. Brennan J.J. Interfacial design and properties of layered BN(+C) coated Nicalon fiber-reinforced glass-ceramic matrix composites. Tomsia A.P., Glaeser A. Ceramic microstructure: Control at the atomic level. 1998;705-712 Plenum Press, New York. Careful characterization of BN and BN/SiC dual layer in a glass-ceramic matrix.
45. Lamouroux F., Bertrand S., Pailler R., Naslain R., Cataldi M. Oxidation-resistant carbon-fiber-reinforced ceramic-matrix composites. Comp. Sci. Tech. 59:1999;1073-1085.
46. Carrere P., Lamon J. Cyclic fatigue behavior at high temperature of a ceramic matrix composite with a self healing matrix. Proc Intl Conf on Fatigue of Composites, 1997, Cite Internationale Universitaire de Paris :1997;SF2M Société Française de Metallurgie et de Materiaux.
47. Zawada L.P. Longitudinal and transthickness tensile behavior of several oxide-oxide composites. Cer. Eng. Sci. Proc. 19:(3):1998;327-339. Good review of the mechanical behavior of several different porous-matrix. Influence of environment on properties is also discussed.
48. Levi C.G., Yang J.Y., Dalgleish B.J., Zok F.W., Evans A.G. Processing and performance of an all-oxide ceramic composite. J. Am. Ceram. Soc. 81:(8):1998;2077-2086. Thorough discussion of processing and mechanical properties of a novel porous-matrix composite that may be more resistant to thermal exposure.
49. Janssen R., Wendorff J., Claussen N. Fiber reinforcement of reaction bonded oxide ceramics. Evans A.G., Naslain R. High-temperature ceramic-matrix composites. II. Manufacturing and materials development. Vol. 58:1995;American Ceramic Society.
50. Kramb VA, John R, Zawada LP. Notched fracture behavior of an oxide-oxide ceramic matrix composite. J Am Ceram Soc, in press. Shows that the notch sensitivity of porous-matrix composites increases with temperature.
51. Lee SS, Stinchcomb WW, Henneke EG II. Effects of heat treatment on tensile strength and failure mode of Nicalon/CAS ceramic composites. In: Sacks MD, editor. Advanced composite materials, American Ceramic Society, OH, 1990:809-815.
52. John R., Zawada L.P., Kroupa J.L. Stresses due to temperature gradients in ceramic-matrix composite aerospace components. J. Am. Ceram. Soc. 82:(1):1999;161-168.
53. Morscher G.N. Fiber effects on minicomposite mechanical properties for several silicon carbide fiber-chemically vapor-infiltrated silicon carbide matrix systems. J. Am. Ceram. Soc. 82:(1):1999;145-155.
54. Parthasarathy T.A., Kerans R.J., Pagano N.J. Effective fiber properties to incorporate coating thermoelastic effects in to fiber/matrix composite models. J. Am. Ceram. Soc. 82:(3):1999;579-584.
55. Parthasarathy T., Kerans R.J. Predicted effects of interfacial roughness on the behavior of selected ceramic composites. J. Am. Ceram. Soc. 80:(8):1997;2043-2055. Provides indicators of large debond path roughness effects on interface properties.
56. Kerans R.J., Parthasarathy T.A., Rebillat F., Lamon J. Interface properties in high-strength Nicalon/C/SIC composites, as determined by rough surface analysis of fiber push-out tests. J. Am. Ceram. Soc. 81:(7):1998;1881-1887. First application of a rough-interface formalism to actual data.
57. Curtin W.A., Ahn B.K., Takeda N. Modeling brittle and tough stress-strain behavior in unidirectional ceramic matrix composites. Acta Mater. 46:(10):1998;3409-3420. Logical and tractable approach to the entire stress-strain curve.
58. Pagano N. On the micromechanical failure modes in a class of ideal brittle matrix composites. Part 1. Coated-fiber composites. Composites. 29B:1998;121-130.
59. Pagano N. On the micromechanical failure modes in a class of ideal brittle matrix composites. Part 2. Axial tension loading of uncoated-fiber composites. Composites. 29B:1998;93-119. Part one and two provide the most rigorous and comprehensive micromechanical approach to crack deflection extant.
60. Dutton RE, Pagano NJ, Kim RY, Pathasarathy TA. Modeling the ultimate tensile strength of unidirectional glass matrix composites. J Am Ceram Soc, in press.
61. McNulty J.C., Zok F.W., Genin G.M., Evans A.G. Notch-sensitivity of fiber-reinforced ceramic-matrix composites: Effects of inelastic straining and volume-dependent strength. J. Am. Ceram. Soc. 82:(5):1999;1217-1228. A thorough analysis of distributed damage toughening.
62. Genin G.M., Hutchinson J.W. Composite laminates in plane stress: Constitutive modeling and stress redistribution due to matrix cracking. J. Am. Ceram. Soc. 80:(5):1997;1245-1255. The beginning of a tractable approach to a design level treatment of composite behavior.