Yttrium aluminum garnet fibers from metalloorganic precursors

Journal of the American Ceramic Society

Volumn 81, Issue 3, 1998, Pages 629-645

  Liu, Yin ^a,b   Zhang, Zhi Fan ^a   Halloran, John ^a,b   Laine, Richard M ^a,b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b AMERICAN CERAMIC SOCIETY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM COMPOUNDS; CRYSTALLINE MATERIALS; DENSITY (SPECIFIC GRAVITY); DIFFERENTIAL THERMAL ANALYSIS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; GRAIN SIZE AND SHAPE; ORGANOMETALLICS; PYROLYSIS; SINTERING; STOICHIOMETRY; THERMOGRAVIMETRIC ANALYSIS; X RAY CRYSTALLOGRAPHY;

YTTRIUM ALUMINUM GARNET;

CERAMIC FIBERS;

EID: 0032022656     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.1998.tb02383.x     Document Type: Article

References (54)

1. Y. Liu, Z.-F. Zhang, B. King, J. W. Halloran, and R. M. Laine, "Synthesis of Yttrium Aluminum Garnet from Yttrium and Aluminum Isobutyrate Precursors," J. Am. Ceram. Soc., 79 [2] 385-94 (1996).
2. (a) G. S. Corman, "High-Temperature Creep of Some Single Crystal Oxides," Ceram. Eng. Sci. Proc., 12 [9-10] 1745-66 (1991).
3. (b) T. A. Parthasarathy, T. Mah, and K. Keller, "High-Temperature Deformation Behavior of Polycrystalline Yttrium Aluminum Garnet (YAG)," Ceram. Eng. Sci. Proc., 12 [9-10] 1767-73 (1991).
4. E. M. Levin, C. R. Robbins, and H. F. McMurdie, Phase Diagrams for Ceramists; p. 122. American Ceramic Society, Columbus, OH, 1969.
5. A. H. Chokshi and J. R. Porter, "Analysis of Concurrent Grain Growth During Creep of Polycrystalline Alumina," J. Am. Ceram. Soc., 69 [2] C-37-C-39 (1986).
6. D. Hull, An Introduction to Composite Materials; pp. 1-8. Edited by R. W. Cahn, E. A. Davis, and I. M. Ward. Cambridge University Press, Cambridge, U.K., 1985.
7. (a) F. T. Wallenberger, N. E. Weston, and S. A. Dunn, "Inviscid Melt Spinning: As-Spun Crystalline Alumina Fibers," J. Mater. Res., 5 [11] 2682-86 (1990).
8. (b) F. T. Wallenberger, N. E. Weston, K. Motzfeldt, and D. G. Swartzfager. "Inviscid Melt Spinning of Alumina Fibers: Chemical Jet Stabilization," J. Am. Ceram. Soc., 75 [3] 629-36 (1992).
9. (c) F. T. Wallenberger, "Melt Spinning of Amorphous Alumina Fibers," Am. Ceram. Soc. Bull., 69 [10] 1646-48 (1990).
10. T. F. Cooke, "Inorganic Fibers - A Literature Review," J. Am. Ceram. Soc., 74 [12] 2959-78 (1991).
11. L. E. Seulert, "Alumina Fiber," U.S. Pat. No. 3 808 015, 1974.
12. Z.-F. Zhang, "Processing Silicon Carbide Fibers from Organosilicon Precursors"; Ph.D. Dissertation. The University of Michigan, Ann Arbor, MI, 1994.
13. (a) B. H. King, Y. Liu, R. M. Laine, and J. W. Halloran, "Fabrication of Yttrium Aluminate Fibers," Ceram. Eng. Sci. Proc., 14 [7-8] 639-50 (1993).
14. (b) S. D. Nunn, D. Popovic, S. Baskaran, J. W. Halloran, G. Subramanian, and S. G. Bike, "Suspension Dry Spinning and Rheological Behavior of Ceramic-Powder-Loaded Polymer Solutions," J. Am. Ceram. Soc., 76 [10] 2460-64 (1993).
15. G. Gowda, "Synthesis of Yttrium Aluminates by the Sol-Gel Process," J. Mater. Sci. Lett., 5, 1029-32 (1986).
16. (a) R. M. Laine, K. A. Youngdahl, R. A. Kennish, M. L. Hoppe, Z.-F. Zhang, and D. J. Ray, "Superconducting Fibers from Organometallic Precursors, Part II: Chemistry and Low Temperature Processing," J. Mater. Res., 6, 895 (1991).
17. (b) Z.-F. Zhang, R. A. Kennish, K. A. Blohowiak, M. L. Hoppe, and R. M. Laine, "Superconducting Fibers From Organometallic Precursors. Part III. High Temperature Pyrolytic Processing," J. Mater. Res., 8, 1777-90 (1993).
18. (c) R. M. Laine and K. A. Youngdahl, U.S. Pat. No. 5 071 833, 1993.
19. R. S. Hay, "Phase Transformations and Microstructure Evolution in Sol-Gel Derived Yttrium-Aluminum Garnet Films," J. Mater. Res., 8, 578-604 (1993).
20. R. Baranwal, A. Zika, B. L. Mueller, and R. M. Laine, "Preceramic Polymer Routes to Amorphous and Crystalline Aluminosilicate Powders for Electrorheological Applications. I."; pp. 157-69 in Progress in Electrorheology. Edited by K. Havelka and F. E. Filisko. Plenum Press, New York, 1995.
21. (a)S. Yajima, "Synthesis of a Polytitanocarbosilane and Its Conversion into Inorganic Compounds," J. Mater. Sci., 16, 1349-55 (1981).
22. (b) S. Yajima, "Special Heat-Resisting Materials from Organometallic Polymers," Am. Ceram. Soc. Bull., 62 [8] 893-98 (1983).
23. J. C. Romine, "Aluminum Oxide Fibers"; pp. 151-75 in Handbook of Fiber Science and Technology: Vol. III, High Technology Fibers Part B. Edited by M. Lewin and J. Preston. Marcel Dekker, New York, 1983.
24. Sumitomo Chemical Industries, Jpn. Pat. Nos., 83 98 428 and 58 98 428, 1983.
25. D. D. Johnson, J. Coated Fabr., 11, 282 (1981).
26. G. F. Everitt, "Stabilized Aluminum Acetate Used for an Alumina Source in Ceramic Fibers"; in Ultrastructure Processing of Advanced Ceramics. Edited by J. D. Mackenzie and D. R. Ulrich. Wiley, New York, 1988.
27. H. G. Sowman and T. T. Tran, "Refractory Fibers of Alumina and Amorphous Phosphorus Pentoxide," U.S. Pat. No. 4 801 562, 1989.
28. T. E. Wood and D. M. Wilson, "Macrocrystalline Alumina-Based Ceramic Articles," U.S. Pat. No. 4 954 462, 1990.
29. (a) H. G. Sowman, "Refractory Fibers of Alumina and Organic Residue," U.S. Pat. No. 4 929 578, 1990.
30. (b) D. M. Wilson, D. C. Lueneburg, and S. L. Lieder, "High Temperature Properties of Nextel 610 and Alumina-Based Nanocomposite Fibers," Ceram. Eng. Sci. Proc., 14 [7-8] 609-21 (1993).
31. (a) K. Pallavi; unpublished paper on mullite fibers.
32. (b) G. D. Soraru, M. Mercadini, R. D. Maschio, F. Taulelle, and F. Babonneau, "Si-Al-O-N Fibers from Polymeric Precursor: Synthesis, Structural, and Mechanical Characterization," J. Am. Ceram. Soc., 76 [10] 2595-600 (1993).
33. (c) O. Funayama, H. Nakahara, A. Tezuka, T. Ishii, and T. Isoda, "Development of Si-B-O-N Fibers from Polyborosilazane," J. Mater. Sci., 29, 2238-44 (1994).
34. (d) D. B. Marshall, F. F. Lange, and P. D. Morgan, "High-Strength Zirconia Fibers," J. Am. Ceram. Soc., 70 [8] C-187-C-188 (1987).
35. (e) M. E. P. Fernandez, C. Rang, and P. L. Mangonon, "Processing Ceramic Fibers by Sol-Gel," Chem. Eng. Prog., 89 [9] 49-53 (1993).
36. (f) G. Emig, R. Wirth, and R. Zimmermann-Chopin, "Sol/Gel-Based Precursors for Manufacturing Refractory Oxide Fibers," J. Mater. Sci., 29, 4559-66 (1994).
37. 3 Eutectic Fiber," J. Am. Ceram. Soc., 79 [5] 1218-22 (1996).
38. 12 (YAG) Eutectic Composite," Ceram. Eng. Sci. Proc., 11 [9-10] 1617 (1990).
39. (a) B. M. Tissue, W. Jia, L. Lu, and W. M. Yen, "Coloration of Chromium-Doped Yttrium Aluminum Garnet Single-Crystal Fibers Using a Divalent Codopant," J. Appl. Phys., 70 [7] 3775-77 (1991).
40. (b) G. S. Corman, "Strength and Creep of Single Crystal YAG Fibers"; presented at the 94th Annual Meeting of the American Ceramic Society, Minneapolis, MN, April 12-16, 1992 (Paper No. 64-SII-92).
41. G. N. Morscher, K. C. Chen, and K. S. Mazdiyasni, "Creep-Resistance of Developmental Polycrystalline Yttrium-Aluminum Garnet Fibers," Ceram. Eng. Sci. Proc., 14 [7-8] 181-88 (1994).
42. Y. Liu, B. H. King, Z.-F. Zhang, J. W. Halloran, and R. M. Laine, "Creep Resistant Oxide Fibers," Paper No. WL-TR-94-4100, Materials Directorate, Wright Laboratory, Air Force Material Command, Wright-Patterson AFB, OH, March 1994.
43. B. H. King and J. W. Halloran, "Polycrystalline Yttrium Aluminum Garnet Fibers from Colloidal Sols," J. Am. Ceram. Soc., 78 [8] 2141-48 (1995).
44. P. A. Siemers, R. L. Mehan, and H. Moran, "A Comparison of the Uniaxial Tensile and Pure Bending Strength of SiC Filaments," J. Mater. Sci., 23, 1329-33 (1988).
45. J. T. Kwon, "Aluminum Formate: Part I, The Synthesis of Aluminum Formates. Pan II, The Pyrolysis Reactions of Aluminum Formates"; Ph.D Dissertation; pp. 9-19. Cornell University, New York, 1963.
46. 2O," Russ. J. Inorg. Chem. (Engl. Transl.), 29 [9] 1260-63 (1984).
47. T. Sato, "Thermal Decomposition of Inorganic and Organic Acid Salts of Aluminum and Thermal Transformation of the Formed Aluminas," Netsu Sokutei, 13 [3] 113-22 (1986).
48. L. M. Seaverson, S.-Q. Luo, P.-L. Chien and J. F. McClelland, "Carbonate Associated with Hydroxide Sol-Gel Processing of Yttria: An Infrared Spectroscopic Study," J. Am. Ceram. Soc., 69 [5] 423-29 (1986).
49. G. A. M. Hussein, "Formation of High Surface-Area Yttrium Oxide by the Thermal Decomposition of Different Inorganic Precursors," Thermochim. Acta, 244, 139-51 (1994).
50. V. N. Maksimov, K. N. Semenenko, T. N. Naumova, and A. V. Novoselova, "The Aluminum Acetates," Russ. J. Inorg. Chem. (Engl. Transl.), 5 [3] 267-70 (1960).
51. W. Weng, J. Yang, and Z. Ding, "The Sol-Gel Process of the Yttrium Complex from Yttrium Acetate," J. Non-Cryst. Solids. 169, 177-82 (1994).
52. P. Apte, H. Burke, and H. Pickup, "Synthesis of Yttrium Aluminum Garnet by Reverse Strike Precipitation," J. Mater. Res., 7 [3] 706-11 (1992).
53. V. Lavaste, J. Besson, M. Berger, and A. R. Bunsell, "Elastic and Creep Properties of Alumina-Based Single Fibers," J. Am. Ceram. Soc., 78 [11] 3081-87 (1995).
54. D. J. Pysher and R. E. Tressler, "Creep Rupture Studies of Two Alumina-Based Ceramic Fibers," J. Mater. Sci., 27, 423-28 (1992).