Application of soft X-ray absorption spectroscopy in chemical characterization of antiwear films generated by ZDDP Part I: The effects of physical parameters

Wear

Volumn 202, Issue 2, 1997, Pages 172-191

  Yin, Zhanfeng ^a,d   Kasrai, Masoud ^a   Fuller, Marina ^a   Bancroft, G Michael ^a   Fyfe, Kim ^b   Tan, Kim H ^c  

^a UNIVERSITY OF WESTERN ONTARIO   (Canada)

^b Sarnia Research Centre   (Canada)

^c UNIVERSITY OF WISCONSIN MADISON   (United States)

^d NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

Author keywords

Antiwear; Film formation mechanisms; Polyphosphates; XANES

Indexed keywords

COMPOSITION; DECOMPOSITION; ELECTRONS; FLUORESCENCE; STEEL; SULFUR; SULFUR COMPOUNDS; SURFACES; THERMAL EFFECTS; WEAR RESISTANCE; X RAY SPECTROSCOPY; ZINC COMPOUNDS;

ANTIWEAR FILMS; DEPTH PROFILING; FILM FORMATION MECHANISM; FLUORESCENCE YIELD; POLYPHOSPHATES; TOTAL ELECTION YIELD; X RAY ABSORPTION NEAR EDGE STRUCTURE SPECTROSCOPY; ZINC DIALKYLDITHIOPHOSPHATES;

PROTECTIVE COATINGS;

ANTIWEAR; FILMS;

EID: 0000559486     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(96)07272-9     Document Type: Article

References (65)

1. D. Klamman (ed.), Lubricants and Related Products, Weinheim, Deerfield Beach, Fla., 1984, Chapter 9, Additives.
2. W.J. Bartz, Engine Oils and Automotive Lubrication, Marcel Dekker, New York, 1993.
3. J.S. Sheasby, T.A. Caughlin, A.G. Blahey, and K.F. Laycock, A reciprocating wear test for evaluating boundary lubrication, Tribol. Int., 23 (1990) 301-307.
4. F.G. Rounds, Some factors affecting the decomposition of three commercial zinc organodithiophosphates, ASLE Trans., 18 (1975) 79-89.
5. R.J. Bird, and G.D. Galvin, The application of photoelectron spectroscopy to the study of E.P. films on lubricated surfaces, Wear, 37 (1976) 143-167.
6. H. Spedding, and R.C. Watkins, The antiwear mechanism of ZDDPs, Part I, Tribol. Int., 15 (1982) 9-12.
7. R.C. Watkins, The antiwear mechanism of ZDDPs, Part II, Tribol. Int., 15 (1982) 13-15.
8. S. Jahanmir, Wear reduction and surface layer formation by a ZDDP additive, J. Tribol., 109 (1987) 577-586.
9. W.A. Glaeser, D. Baer, and M. Engelhardt, In situ wear experiments in the scanning Auger spectrometer, Wear, 162-164 (1993) 132-138.
10. P.A. Willermet, J.M. Pieprzak, D.P. Dailey, R.O. Carter III, N.E. Lindsay, L.P. Haack, and J.E. de Vries, The composition of surface layers formed in a lubricated cam/tappet contact, ASME Trans., 113 (1991) 38-47.
11. P.A. Willermet, R.O. Carter III, E.N. Boulos, Lubricant-derived tribochemical films: an infrared spectroscopic study, Tribol. Int., 25 (1992) 371-380.
12. P.A. Willermet, D.P. Dailey, R.O. Carter III, P.J. Schmitz, W. Zhu, J.C. Bell and D. Park, The composition of lubricant-derived surface layers formed in a lubricated cam/tappet contact, II: effects of adding overbased detergent and dispersant to a simple ZDTP solution, Tribol. Int., 28 (1995) 163-175.
13. J.M. Martin, M. Belin, J.L. Mansot, H. Dexpert, and P. Lagarde, Friction-induced amorphization with ZDDP: an EXAFS study, ASLE Trans., 29 (1986) 523-531.
14. M. Belin, J.M. Martin, J.L. Mansot, Role of iron in the amorphization process in friction-induced phosphate glasses, ASLE Trans., 32 (1989) 410-413.
15. J.C. Bell, K.M. Delargy, and A.M. Seeney, The removal of substrate material through thick zinc dithiophosphate anti-wear films, Proc. 18th Leeds-Lyon Symp. on Tribology, Lyon, France, September 1991, Elsevier, Amsterdam, 1992, pp. 387-396.
16. J.C. Bell, and K.M. Delargy, The composition and structure of model zinc dialkyldithiophosphate anti-wear films, Proc. 6th Int. Congr. on Tribology 'Eurotrib 93', Budapest, 2, 1993, p. 328.
17. Z. Yin, M. Kasrai, G.M. Bancroft, K.F. Laycock, and K.H. Tan, Chemical characterization of antiwear films using X-ray absorbance near edge structure (XANES) spectroscopy, Tribol. Int., 26 (1993) 383-387.
18. M. Kasrai, Z. Yin, Z., G.M. Bancroft, K.F. Laycock, K.H. Tan, X.H. Feng, Chemical characterization of tribochemical films using X-ray absorption spectroscopy, Proc. European Academy of Surface Technology, Eugen G. Leuze, Saulgag/Württ, 1994, pp. 79-85.
19. M. Kasrai, M. Fuller, M. Scaini, Z. Yin, R.W. Brunner, G.M. Bancroft, M.E. Fleet, K. Fyfe and K.H. Tan, Study of tribochemical film formation using X-ray absorption and photoelectron spectroscopies, in D. Dowson et al. (eds.), Lubricants and Lubrication, Elsevier, Amsterdam, 1995, pp. 659-669.
20. Z. Yin, M. Kasrai, G.M. Bancroft and K.H. Tan, X-ray absorption spectroscopy study of sodium polyphosphates, Phys. Rev., B 51 (1995) 742-750.
21. M. Kasrai, W.N. Lennard, R.W. Brunner, G.M. Bancroft, J.A. Bardwell, K.H. Tan, Sampling depth of total electron and fluorescence measurements in Si L-edge and K-edge absorption spectroscopy, Appl. Surf. Sci., 99 (1996) 303-312.
22. D.C. Koningsberger and R. Prins (eds.), X-ray Absorption: Principles, Applications, Techniques of EXAFS, SEXAFS and XANES, Wiley, New York, 1988.
23. M. Kasrai, Z. Yin, G.M. Bancroft and K.H. Tan, X-ray fluorescence measurements of Si, P and S L-edge, J. Vac. Sci. Technol., A 11 (1993) 2694-2699.
24. 31P NMR spectroscopy, Tribol. Trans., 33 (1990) 15-20.
25. F.T. Barcroft, R.J. Bird, J.F. Hutton and D. Park, The mechanism of action of zinc thiophosphates as extreme pressure agents, Wear, 77 (1982) 355-384.
26. B. Dacre and C.H. Bovington, The effect of metal composition on the adsorption of zinc di-isopropyldithiophosphate, ASLE Trans., 26 (1983) 333-343.
27. B. Dacre, C.H. Bovington, The adsorption and desorption of zinc diisopropyldithiophosphate on steel, ASLE Trans., 24 (1981) 546-554.
28. J.J. Habeeb and W.H. Stover, The role of hydroperoxides in engine wear and the effect of zinc dialkyldithiophosphates, ASLE Trans., 30 (1987) 419-426.
29. H. So, Y.C. Lin, The theory of antiwear for ZDDP at elevated temperature in boundary lubrication condition, Wear, 177 (1994) 105-115.
30. J.M. Palacios, Thickness and chemical composition of films formed by antimony dithiocarbamate and zinc dithiophosphate, Tribol. Int., 19 (1986) 35-39.
31. S. Plaza, The adsorption of zinc dibutyldithiophosphates on iron and iron oxide powders, ASLE Trans., 30 (1987) 233-240.
32. P.A. Willermet, S.K. Kandah, W.O. Siegl and R.E. Chase, The influence of molecular oxygen on wear protection by surface-active compounds, ASLE Trans., 26 (1983) 523-531.
33. P.A. Willermet, and S.K. Kandah, Some observations on the role of oxygen in lubricated water, Lubr. Sci., 5 (1993) 129-147.
34. R.C. Coy and R.B. Jones, The thermal degradation and EP performance of zinc dialkyldithiophosphate additives in white oil, ASLE Trans., 24 (1981) 77-90.
35. R.B. Jones and R.C. Coy, The chemistry of the thermal degradation of zinc dialkyldithiophosphate additives, ASLE Trans., 24 (1981) 91-97.
36. C.H. Bovington and B. Dacre, The adsorption and reaction of decomposition products of zinc di-isopropyldithiophosphate, ASLE Trans., 27 (1984) 252-258.
37. J.J. Dickert and C.N. Rowe, The thermal decomposition of metal O,O-dialkylphosphorodithioates, J. Org. Chem., 32 (1967) 647-653.
38. J.M. Palacios, Films formed by antiwear additives and their incidence in wear and scuffing, Wear, 114 (1987) 41-49.
39. S.-H. Chao, K.C. Ludema, G.E. Potter, B.M. DeKoven, T.A. Morgan and K.K. Kar, A model of the dynamics of boundary film formation, Wear, 177 (1994) 33-45.
40. N.E. Lindsay, R.O. Carter III, P.J. Schmitz, L.P. Haack, R.E. Chase, J.E. de Vries, and P.A. Willermet, Characterization of films formed at a lubricated cam/tappet contact, Spectrochim. Acta, 49A (1993) 2057-2070.
41. P.G. Harrison and P. Brown, External reflection FTIR, 31P MAS NMR and SEM study of the thermal decomposition of zinc (π) bis(O,O′-dialkyldithiophosphates) on 316 stainless steel, Wear, 148 (1991) 123-134.
42. K.L. Rhodes, P.C. Stair, The effect of ZDPs on the surface chemistry of hydrocarbon films on oxidized iron substrates, Tribol. Trans., 36 (1993) 27-34.
43. F. Rounds, Effects of hydroperoxides on wear as measured in 4-ball wear tests, Tribol. Trans., 36 (1993) 297-303.
44. H. So, Y.C. Lin, G.G.S. Huang and S.T. Chang, Antiwear mechanism of zinc dialkyldithiophosphates added to paraffinic oil in the boundary lubrication condition, Wear, 166 (1993) 17-26.
45. G.M. Bancroft, New developments in far UV, soft X-ray research at the Canadian synchrotron facility, Canadian Chemical News, 44 (1992) 15-22.
46. D.A. Fischer, J. Colbert and J.L. Gland, Ultrasoft (C, N, O) X-ray fluorescence detection: proportional-counters, focusing multilayer mirrors, and scattered-light systematics, Rev. Sci. Instr., 60 (1989) 1596-1602.
47. J.G. Chen, D.A. Fischer, J.H. Hardenbergh, R.B. Hall, A fluorescence-yield near-edge spectroscopy (Fynes) investigation of the reaction-kinetics of NiO/Ni (100) with hydrogen, Surf. Sci., 279 (1992) 13-22.
48. 1-xO, Catalysis Lett., 23 (1994) 25-35.
49. A.G. Sharpe, Inorganic Chemistry, Longman, England, 1986, p. 362.
50. R. Gresch, W. Müller-Warmuth, H. Datz, X-ray photoelectron spectroscopy of sodium phosphate glasses, J. Non-Cryst. Solids, 34 (1979) 127-136.
51. R. Brückner, H.-U. Chun, H. Goretzki, M. Sammet, XPS measurements and structural aspects of silicate and phosphate glasses, J. Non-Cryst. Solids, 42 (1980) 49-60.
52. E.C. Onyiriuka, Zinc phosphate-glass surfaces studied by XPS, J. Non-Cryst. Solids, 163 (1993) 268-273.
53. N.S. McIntyre and D.G. Zetatak, X-ray photoelectron spectroscopic studies of iron oxides, Analytical Chem., 49 (1977) 1521-1529.
54. L.A. Grunes, R.D. Leapman, C.N. Wilker, R. Hoffmann, A.B. Kuntz, Oxygen-K near-edge fine-structure: an electron-energy-loss investigation with comparisons to new theory for selected 3D transition-metal oxides, Phys. Rev., B 25 (1982) 7157-7173.
55. L.A. Grunes, Study of the K edges of 3D transition-metals in pure and oxide form by X-ray-absorption spectroscopy, Phys. Rev., B 27 (1983) 2111-2131.
56. M. Kasrai, J.R. Brown, G.M. Bancroft, Z. Yin and K.H. Tan, Sulphur characterization in coal from X-ray absorption near edge spectroscopy, Int. J. Coal Geol. (accepted).
57. Z. Yin, M. Kasrai, G.M. Bancroft and K.H. Tan, To be published.
58. K.L. Rhodes and P.C. Stair, The surface chemistry of zinc dialkyldithiophosphate, an antiwear additive, on oxidized iron and steel foils, J. Vac. Sci. Technol., A6 (1988) 971-974.
59. I. Sieber, K. Meyer, H. Kloss and A. Schöpke, Characterization of boundary-layers formed by different metal dithiophosphates in a 4-ball machine, Wear, 85 (1983) 43-56.
60. L.L. Cao, Y.M. Sun and L.Q. Zheng, Chemical structure characterization of the boundary lubrication film using X-ray photoelectron spectroscopy and scanning Auger microprobe techniques, Wear, 140 (1990) 345-357.
61. J.M. Georges, J.M. Martin, T. Mathia, Ph. Kapsa, G. Meille and H. Montes, Mechanism of boundary lubrication with zinc dithiophosphate, Wear, 53 (1979) 9-32.
62. 5, J. Electrochem. Soc., 105 (1958) 125-130.
63. P.V. Kotvis, L.A. Huezo and W.T. Tysoe, Surface-chemistry of methylene-chloride on iron: a model for chlorinated-hydrocarbon lubricant additives, Langmuir, 9 (1993) 467-474.
64. G.P. Hastie, K.J. Roberts, D. Adam, D. Fischer and G. Meitzner, Investigating the structural chemistry at the interface formed between zinc dialkyldithiophosphate (ZDDP) and mild steel using ultra-soft X-ray absorption spectroscopy, Jpn. J. Appl. Phys., 32, Suppl. 32-2 (1993) 407-409.
65. P.A. Willermet, D.P. Dailey, R.O. Carter III, P.J. Schmitz, W. Zhu, Mechanism of formation of antiwear films from zinc dialkyldithiophosphates, Tribol. Int., 28 (1995) 177-187.