On material immanent ratchetting of two-phase materials under cyclic purely thermal loading

Archive of Applied Mechanics

Volumn 69, Issue 9-10, 1999, Pages 727-750

  Silberschmidt, V V ^a   Rammerstorfer, F G ^a   Werner, E A ^b   Fischer, F D ^c   Uggowitzer, P J ^d  

^a TECHNICAL UNIVERSITY OF MUNICH   (Germany)

^b VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

^c INSTITUTE OF MECHANICS   (Austria)

^d ETH ZURICH   (Switzerland)

Author keywords

Duplex steel; Metal matrix composites; Micromechanics; Ratchetting; Shakedown; Thermal cycling; Thermo elasto plasticity; Two phase materials

Indexed keywords

EID: 0000399043     PISSN: 09391533     EISSN: None     Source Type: Journal    
DOI: 10.1007/s004190050253     Document Type: Article

References (77)

1. Desch, C. H.: Discussion to paper by M. Cook "Crystal growth in cadmium". Trans. Faraday Soc. 19 (1923) 48
2. Fischer, F. D.; Rammerstorfer, F. G.; Bauer, F. J.: Fatigue and fracture of high-alloyed steel specimens subjected to purely thermal cycling. Metall. Trans. 21A (1990) 935-948
3. Siegmund, T.; Werner, E.; Fischer, F. D.: The irreversible deformation of a duplex stainless steel under thermal loading. Mater. Sci. Eng. A169 (1993) 125-133
4. Werner, E.; Siegmund, T.; Fischer, F. D.: A computer study on the thermomechanical deformation behaviour of a duplex steel. Comput. Mater. Sci. 3 (1994) 279-285
5. Boas, W.; Honeycombe, R. W. K.: Thermal fatigue of metals. Nature 153 (1944) 494
6. Boas, W.; Honeycombe, R. W. K.: The plastic deformation of non-cubic metals by heating and cooling. Proc. Royal Soc. London 186A (1946) 57-71
7. Burke, J. E.; Turkalo, A. M.: Deformation of zinc bicrystals by thermal ratchetting. Trans. AIME. J. Metals 4 (1952) 651-656
8. Chiswik, H. H.: The plastic deformation of uranium on thermal cycling. Trans. ASM 49 (1957) 622-646
9. Frankel, J. P.: Written discussion. Trans. ASM 49 (1957) 652
10. Chiswik, H. H.: Author's reply. Trans. ASM 49 (1957) 653-654
11. Dunand, D. C.; Bedell, C. M.: Transformation- mismatch superplasticity in reinforced and unreinforced titanium. Acta Mat. 44 (1996) 1063-1076
12. Fischer, F. D.; Sun, Q.-P.; Tanaka, K.: Transformation-induced plasticity (TRIP). Appl. Mech. Rev. 49 (1996) 317-364
13. Fischer, F. D.; Schlögl, S. M.: The influence of material anisotropy on transformation induced plasticity in steel subject to martensitic transformation. Mech. Mat. 21 (1995) 1-23
14. Grill, R.: Umwandlungsplastizität eines hochlegierten Nickelstahles bei ein- und zweiachsiger Spannung und ohne Last. Master Thesis, Montanuniversität Leoben 1995
15. Miller, R. D.: Thermal stress ratchet mechanism in pressure vessels. Trans. ASME. J. Basic. Eng. 81 (1959) 190-196
16. Burgreen, D.: The thermal ratchet mechanism. Trans. ASME. J. Basic. Eng. 90 (1968) 319-324
17. Burgreen, D.: Structural growth induced by thermal cycling. Trans. ASME. J. Basic. Eng. 90 (1968) 469-475
18. Bree, J.: Elastic-plastic behaviour of thin tubes subjected to internal pressure and intermittent high-heat fluxes with application to fast-nuclear reactor fuel elements. J. Strain Anal. 2 (1967) 226-238
19. Mulcachy, T. M.: An assessment of kinematic hardening thermal ratcheting. Trans. ASME. J. Eng. Mat. Technol. 96 (1974) 214-221
20. Mulcachy, T. M.: Thermal ratchetting of a beam element having an idealized Bauschinger effect. Trans. ASME. J. Eng. Mat. Technol. 98 (1976) 264-271
21. Goodman, A. M.: Incremental plastic deformation of a cylinder subjected to cyclic thermal loading. In: Stanley, P. (ed.) Non-linear problems in stress analysis, pp. 317-344. London: Applied Science Publ. 1978
22. Brunsvold, A. R.; Ahmed, H. U.; Stone, C. C.: Thermal ratchetting with kinematic hardening in a two-bar assembly with unequal areas and properties. Trans. ASME. J. Eng. Mat. Technol. 98 (1976) 256-263
23. Uga, T.: An experimental study of progressive strain growth due to thermal ratcheting. Trans. ASME. J. Eng. Mat. Technol. 100 (1978) 150-156
24. Megahed, M.; Ponter, A. R. S.; Morrison, C. J.: A theoretical and experimental investigation of material ratcheting in a Bree beam element. Int. J. Mech. Sci. 25 (1983) 917-933
25. Megahed, M.; Ponter, A. R. S.; Morrison, C. J.: Experimental investigation into the influence of cyclic phenomena of metals on structural ratcheting behaviour. Int. J. Mech. Sci. 26 (1984) 625-638
26. Jansson, S.; Leckie, F. A.: Mechanical behavior of a continuous fiber-reinforced aluminium matrix composite subjected to transverse and thermal loading. J. Mech. Phys. Solids 40 (1992) 593-612
27. Ponter, A. R. S.; Leckie, F. A.: Bounding properties of metal matrix composites subjected to cyclic thermal loading. J. Mech. Phys. Solids. 46 (1998) 697-717
28. Ponter, A. R. S.; Leckie, F. A.: On the behaviour of metal matrix composites subjected to cyclic thermal loading. J. Mech. Phys. Solids 46 (1998) 2183-2199
29. Ponter, A. R. S.; Cocks, A. C. F.: The incremental strain growth of an elastic-plastic body loaded in excess of the shakedown limit. Trans. ASME. J. Appl. Mech. 51 (1984) 465-469
30. Olsson, M.; Giannakopoulos, A. E.; Suresh, S.: Elastoplastic analysis of thermal cycling: ceramic particles in a metallic matrix. J. Mech. Phys. Solids 43 (1995) 1639-1671
31. Kobayashi, M.; Ohno, N.: Thermal ratchetting of a cylinder subjected to a moving temperature front: effect of kinematic hardening rules on the analysis. Int. J. Plasticity 12 (1996) 255-271
32. Armstrong, P. J.; Fredrick, C. O.: A mathematical representation of the multiaxial Bauschinger effect. CEGB Report, RD/B/N731, Berkley Nuclear Laboratories 1966
33. Chaboche, J. L.: Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int. J. Plasticity 5 (1989) 247-302
34. Chaboche, J. L.; Rousselier, G.: On the plastic and viscoplastic constitutive equations. Trans. ASME J. Pressure Vessel. Tech. 105 (1983) 153-164
35. Polizzotto, C.: On the conditions to prevent plastic shakedown of structures: Part I - Theory. Part II -The plastic shakedown load. Trans. ASME. J. Appl. Mech. 60 (1993) 15-25
36. Polizzotto, C.: On elastic plastic structures under cyclic loads. Eur. J. Mech. A/Solids 13 (1994) 149-173
37. Ponter, A. R. S.; Cocks, A. C. F.: The incremental strain growth of elastic-plastic bodies subjected to high levels of cyclic thermal loading. Trans. ASME. J. Appl. Mech. 51 (1984) 470-474
38. Gokhfeld, D. A.; Cherniavsky, O. F.: Limit analysis of structures at thermal cycling. Alphen aan den Rijn: Sijthoff & Noordhoff 1980
39. Koiter, W. T.: General theorems for elastic-plastic solids. In: Sneddon, J. N.; Hill, R. (eds.) Progress in solid mechanics. Vol. 1, pp. 167-221. Amsterdam: North Holland 1960
40. König, J. A.: Shakedown of elastic-plastic structures. Amsterdam e. a.: Elsevier 1987
41. Ponter, A. R. S.; Karadeniz, S.: An extended shakedown theory for structures that suffer cyclic thermal loading. Part I: Theory. Part II: Applications. Trans. ASME. J. Appl. Mech. 52 (1985) 877-889
42. Ng, H. W.; Nadarajah, C.: Biaxial ratcheting and cyclic plasticity for Bree-type loading - Part1: Finite element analysis. ASME J. Pressure Vessel Tech. 118 (1996) 154-160
43. Jansson, S.; Dal Bello, D. J.; Leckie, F. A.: Transverse and cyclic thermal loading of the fibre reinforced metal-matrix composite SCS6/Ti-15-3. Acta. Metall. Mat. 42 (1994) 4015-4024
44. Ponter, A. R. S.; Leckie, F. A.: Bounding properties of metal-matrix composites subjected to cyclic thermal loading. J. Mech. Phys. Solids 46 (1998) 697-717
45. Jansson, S.; Leckie, F. A.: Transverse tensile and inplane shear strength of weakly bonded fiber reinforced MMC's subjected to cyclic thermal loading. Mech. Mater 18 (1994) 205-212
46. Taya, M.; Armstrong, T. W.; Dunn, M.: Analytical study of dimensional changes in thermally cycled metal matrix composites. Mater. Sci. Eng. A143 (1991) 143-154
47. Zhang, H.-Y.; Anderson, P. M.; Daehn, C. S.: Analysis of thermally induced stress and strain in continous fiber-reinforced composites. Met. Trans. 25A (1994) 415-425
48. Weissenbek, E.; Böhm, H. J.; Rammerstorfer, F. G.: Micromechanical investigations of arrangement effects in particle reinforced metal matrix composites. Comp. Mater. Sci. 3 (1994) 263-278
49. Böhm, H. J.; Rammerstorfer, F. G.; Fischer, F. D.; Siegmund, T.: Microscale arrangement effects on the thermomechanical behaviour of advanced two-phase materials. Trans. ASME. J. Eng. Mat. Technol. 116 (1994) 268-273
50. Pettermann, H. E.; Plankensteiner, A. F.; Böhm, H. J.; Rammerstorfer, F. G.: A thermo-elasto-plastic constitutive material law based on an incremental Mori-Tanaka-approach, Comput. Struct. 71 (1999) 197-214
51. Horvath, W.; Prantl, W.; Werner, E.; Stüwe, H. P.: Influence of thermal cycling on the microstructure of a stainless ferritic-austenitic duplex steel. Mater. Charact. 34 (1995) 277-285
52. Siegmund, T.; Werner, E.; Fischer, F. D.: On the thermomechanical deformation behaviour of duplex-type materials. J. Mech. Phys. Solids 43 (1995) 495-532
53. Horvath, W.; Tabernig, B.; Werner, E.; Uggowitzer, P.: Microstructure and yield strength of nitrogen alloyed super duplex steels. Acta Mat. 45 (1997) 1645-1654
54. Exner, H. E.: Quantitative description of microstructures by image analysis. In: Lifshin, E. (ed.) Characterization of materials (Materials Science and Technology; Vol. 2, Pt. 2), pp. 281-350. Weinheim e. a.: VCH 1994
55. Werner, E.; Siegmund, T.; Weinhandl, H.; Fischer, F. D.: Properties of random polycrystalline two-phase materials. Appl. Mech. Rev. 47 (1994) S230-S240
56. Horvath, W.; Prantl, W.; Werner, E.: Elektronenmikroskopie an einem Duplexstahl. Sonderbände der Praktischen Metallographie 26 (1995) 227-236
57. Horvath, W.; Prantl, W.; Stroißnigg, H.; Werner, E.: Microhardness and microstructure of austenite and ferrite in nitrogen alloyed duplex steels between 20 and 500°C. Mat. Sci. Eng. A256 (1998) 227-236
58. Tvergaard, V.: Analysis of tensile properties for whisker reinforced MMC. Acta Metall. Mat. 38 (1990) 185-192
59. Silberschmidt, V. V.; Werner, E.: Analysis of thermal residual stresses in duplex-type materials. Comput. Mat. Sci. (to appear)
60. Rosen, B. W.; Hashin, Z.: Effective thermal expansion coefficients and specific heats of composite materials. Int. J. Eng. Sci. 8 (1970) 157-173
61. Rammerstorfer, F. G.; Böhm, H. J.: Micromechanics for macroscopic material description of FRPs. In: Huit, J.; Rammerstorfer, F. G. (eds.) Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures (CISM Courses and Lectures No. 348), pp. 9-49. Wien et al.: Springer-Verlag 1994
62. Böhm, H. J.: A short Introduction to Basic Aspects of Continuum Micromechanics (CDL-FMD-Report 3-1998). TU Wien 1998
63. Stellbrink, K. K. U.: Micromechanics of composites. Composite properties of fibre and matrix constituents. Munich e. a.: Hanser Publishers 1996
64. Nakamura, T.; Suresh, S.: Effects of thermal residual stresses and fiber packing on deformation of metal-matrix composites. Acta. Metall. Mat. 41 (1993) 1665-1681
65. Böhm, H. J.: Numerical investigation of microplastic effects in unidirectional long-fiber reinforced metal matrix composites. Modelling Simul. Mat. Sci. Eng. 1 (1993) 649-671
66. Weissenbek, E.; Rammerstorfer, F. G.: Influence of the fiber arrangement on the mechanical and thermo-mechanical behavior of short fiber reinforced MMCs. Acta Metall. Mat. 41 (1993) 2833-2844
67. Weissenbek, E.; Böhm, H. J.; Rammerstorfer, F. G.: Micromechanical investigations of arrangement effects in particle reinforced metal matrix composites. Comp. Mat. Sci. 3 (1994) 263-278
68. Aboudi, J.: Micromechanical analysis of composites by the method of cells. Appl. Mech. Rev. 42 (1989) 193-221
69. Böhm, H. J.: Computer based micromechanical investigations of the thermomechanical behavior of metal matrix composites (Reihe 18, Nr. 101). Düsseldorf: VDI 1991
70. Drugan, W. J.; Willis, J. R.: A micromechanics-based nonlocal constitutive equation and estimates of representative volume element size for elastic composites. J. Mech. Phys. Solids 44 (1996) 497-524
71. Gusev, A. A.: Representative volume element size for elastic composites: a numerical study. J. Mech. Phys. Solids 45 (1997) 1449-1459
72. Jäger, F.: Mikromechanische Modellierung von thermischen Zyklen an Duplexstählen. Master Thesis, Institut für Mechanik, Montanuniversität Leoben 1997
73. Weinhandl, H.; Werner, E.: Simulation von Nachbarschaftsverhältnissen in Zweiphasenwerkstoffen. Neue Hütte 37 (1992) 141-145
74. Pedersen, O. B.: Thermoelasticity and plasticity of composites. II. A model system. Acta Metall. Mat. 38 (1990) 1201-1219
75. Hibbit, Karlsson and Sorensen Inc.: ABAQUS - User's Manual. Version 5.8. Hibbit, Karlsson and Sorensen Inc.: Pawtucket 1998
76. Gokhfeld, D. A.; Sadakov, O. S.: Steady cyclic state of a structure: Methods of its direct determination. In: Mroz, Z.; Weichert, D.: Dorosz, S. (eds.) Inelastic behaviour of structures under variable loads, pp. 449-461. London: Kluwer Academic Press 1995
77. Nakamura, T.; Krempl, E.: An analysis of the two bar ratcheting behavior using the viscoplasticity theory based on overstress. Trans. ASME J. Pressure Vessel Tech. 119 (1997) 306-312