Plastic collapse analysis of longitudinally flawed pipes and vessels

Nuclear Engineering and Design

Volumn 234, Issue 1-3, 2004, Pages 25-43

  Staat, M ^a  

^a AACHEN UNIVERSITY OF APPLIED SCIENCES   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

APPROXIMATION THEORY; DATABASE SYSTEMS; DUCTILITY; ELASTICITY; FRACTURE MECHANICS; PRESSURE VESSELS;

DEEP DEFECTS; GLOBAL LIMIT LOADS; PRESSURE VESSEL STEELS;

PIPE;

EID: 9944219941     PISSN: 00295493     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.nucengdes.2004.08.002     Document Type: Article

References (40)

1. Agatonovic, P., 1997. Development of residual strength evaluation tool based on stress-strain approximation. Int. J. Fracture 88, 129-152.
2. Agatonovic, P., 2000. Private communication.
3. Al-Laham, S., 1999. Stress Intensity Factor and Limit Load Handbook. British Energy Report EPD/GEN/REP/0316/98, Issue 2.
4. Andersson, P., Bergman, M., Brickstad, B., Dahlberg, L., Nilsson, F., Sattari-Far, I., 1996. A Procedure for Safety Assessment of Components With Cracks - Handbook. SAQ/FoU-Report 96/08, SAQ Kontrol AB, Stockholm.
5. Ainsworth, R.A., 2000. Foreword: Special issue on flaw assessment methods. Int. J. Pressure Vessels Piping 77, 853.
6. Bodmann, E., Fuhlrott, H., 1981. Investigation of Critical Crack Geometries in Pipes. SMiRT 6, Paris, paper L6/6.
7. Brocks, W., Fuhlrott, H., Keller, H.P., Munz, D., Schulze, H.-D., 1990. Bruchmechanik druckbeanspruchter Bauteile. Hanser, München und TÜV Rheinland, Köln.
8. Carter, A.J., 1991. A Library of Limit Loads for FRACTURE.TWO. Nuclear Electric, Internal Report TD/SID/REP/0191.
9. Chakrabarry, J., 1987. Theory of Plasticity. McGraw-Hill, New York.
10. Fuhlrott, H., Schulze, H.-D., 1990. Längs- und Umfangsfehler in Rohren und Behältern unter Innendruck und äußeren Belastungen. In Brocks et al. (1990).
11. Geilenkeuser, H., Sturm, D., 1976. Rißausbreitung in Großrohren aus dem Stahl St 70. gwf-gas/erdgas 117, 40-43.
12. Görner, F., Munz, D., 1984. Plastische Instabilität. In: Munz, D. (Ed.), Leck-vor-Bruch-Verhalten druckbeaufschlagter Komponenten. Fortschr. Ber. VDI-Z. Reihe, 18, Nr. 14, VDI-Verlag, Düsseldorf.
13. Hahn, G.T., Sarrate, M., Rosenfield, A.R., 1969. Criteria for crack extension in cylindrical pressure vessels. Int. J. Fracture Mech. 5, 187-210.
14. Harrison, R.P., Loosemore, K., Milne, I., Dowling, A.R., 1980. Assessment of the integrity of structures containing defects. CEGB Report R/H/R6-Rev. 2.
15. Heitzer, M., Pop, G., Staat, M., 2000. Basis reduction for the shake-down problem for bounded kinematic hardening material. J. Global Optim. 17, 185-200.
16. Intes, 1988. FERMAS User's Reference Manuals. Stuttgart, Intes Publication Nos. 202, 207, 208, 302, UM 404, UM 405.
17. Kastner, W., Lochner, H., Rippel, R., Bartholomé, G., Keim, E., Gerscha, A., 1983. Untersuchung zur instabilen Rißausbreitung und zum Rißstoppverhalten. Kraftwerk Union Report R 914/83/018, Erlangen.
18. Keller, H.P., 1990. Leistungsvergleich von Methoden der Rißerfassung und -bewertung am Beispiel von axialen Oberflächenrissen in Behältern unter Innendruck. In Brocks et al. (1990).
19. Kiefner, J.F., Maxey, W.A., Eiber, R.J., Duffy, A.R., 1973. Failure Stress Loads of Flaws in Pressurized Cylinders. ASTM STP 536, Philadelphia, pp. 461-481.
20. Kumar, V., German, MD., Shih, C.F., 1981. An Engineering Approach for Elastic-Plastic Fracture Analysis. EPRI NP-1931, New York.
21. Miller, A.G., 1988. Review of limit loads of structures containing defects. Int. J. Pressure Vessels Piping 32, 197-327.
22. Mannucci, G., Demofonti, G., Harris, D., Barsanti, L., Hillenbrand, H.-G., 2001. Fracture Properties of API X100 Gas Pipeline Steels. EP-TP39-01en, Europipe, Ratingen, Germany.
23. R6, 2001. Assessment of the integrity of structures containing defects. British Energy, Rev. 4.
24. R5, 2003. An assessment procedure for the high temperature response of structures. British Energy, Rev. 3.
25. Schulze, H.D., Togler, G., Bodmann, E., 1980. Fracture mechanics analysis on the initiation and propagation of circumferential and longitudinal cracks in straight pipes and pipe bends. Nucl. Eng. Des. 58, 19-31.
26. Schwalbe, K.-H., Zerbst, U., Kim, Y.-J., Brocks, W., Cornec, A., Heerens, J., Amstutz, H., 1998. EFAM ETM 97 - the ETM method for assessing the significance of crack-like defects in engineering structures, comprising the versions ETM 97/1 and ETM 97/2. Report GKSS 98/E/6, Geesthacht.
27. Staat, M., 1995. Reliability of an HTR-Module Primary Circuit Pressure Boundary: Influences, Sensitivity, and Comparison with a PWR. Nucl. Eng. Des. 158, 333-340.
28. Staat, M., Heitzer, M., Yan, A.M., Khoi, V.D., Nguyen, D.H., Voldoire, F., Lahousse, A., 2000. Limit Analysis of Defects. Berichte des Forschungszentrums Jülich, Jül-3746.
29. Staat, M., Heitzer, M., 2001. LISA - a European Project for FEM-based Limit and Shakedown Analysis. Nucl. Eng. Des. 206, 151 166.
30. Staat, M., Heitzer, M. (Eds.), 2003. Numerical Methods for Limit and Shakedown Analysis. NIC-Series, vol. 15. John von Neumann Institute for Computing, Jülich, http://www.fz-juelich.de/nic-series/volume15/nic-series- band15.pdf.
31. Staat, M., 2004. Local and global collapse of longitudinally flawed pipes and cylindrical vessels. Int. J. Pressure Vessels Piping, in press.
32. Stoppler, W., Shen, S.M., de Boer, A., 1992. Versagensanalyse von längsfehlerbehafteten Rohren und Behältern. 22. Technischer Bericht, BMU-1992-347.
33. Stoppler, W., Sturm, D., Scott, P., Wilkowski, G., 1994. Analysis of the failure behaviour of longitudinally flawed pipes and vessels. Nucl. Eng. Des. 151, 425-448.
34. Stoppler, W., 2000. Private communication.
35. Sturm, D., Stoppler, W., 1985. Forschungsvorhaben Phänomenologische Behälterberstversuche - Traglast- und Berstverhalten von Rohren mit Längsfehlern. Förderkennzeichen 150 279, Phase l, Forschungsbericht MPA Stuttgart.
36. Szabó, I., 1972. Höhere Technische Mechanik. Springer, Berlin.
37. Taylor, N., et al., 1999. The Design-by-Analysis Manual. Report EUR 19020 EN, European Commission, DG-JRC/IAM, Petten (1999).
38. Uebing, D., 1959. Festigkeitsverhalten dickwandiger Hohlzylinder unter Innendruck im vollplastischen Bereich. Thesis, TH Stuttgart.
39. Wellinger, K., Sturm, D., 1971. Festigkeitsverhalten von zylindrischen Hohlkörpern. Fortschr. Ber. VDI-Z. Reihe 5, Nr. 13, VDI-Verlag, Düsseldorf.
40. Willoughby, A.A., Davey, T.G., 1989. Plastic Collapse in Part-Wall Flaws in Plates. ASTM STP 1020, Philadelphia, pp. 390-409.