Heat management in solid free-form fabrication based on deposition by welding

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 218, Issue 11, 2004, Pages 1525-1540

  Jandric, Z ^a   Kovacevic, R ^a  

^a SOUTHERN METHODIST UNIVERSITY   (United States)

Author keywords

Controller; Finite element model; Gas tungsten arc welding (GTAW); Heat management

Indexed keywords

AUSTENITE; COMPONENTS; CONTROL EQUIPMENT; DEPOSITION; ELECTRIC ARC WELDING; FINITE ELEMENT METHOD; LASER APPLICATIONS; MATHEMATICAL MODELS; MECHANICAL ENGINEERING; RAPID PROTOTYPING; SINTERING; THREE DIMENSIONAL;

FINITE ELEMENT MODELS; GAS-TUNGSTEN ARC WELDING (GTAW); HEAT MANAGEMENT; LASER-ENGINEERED NET SHAPING (LENS);

LAYERED MANUFACTURING;

EID: 9744241980     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/0954405042418545     Document Type: Conference Paper

References (39)

1. Prinz, F. B. and Weiss, L. E. Method and apparatus for fabrication of three-dimensional metal articles by weld deposition. US Pat. 5,207,371, 1993.
2. Kmecko, S. I., Kovacevic, R. and Jandric, Z. Machine vision based control of gas tungsten arc welding for rapid prototyping. In Proceedings of the 11th Annual Solid Freeform Fabrication Symposium, Austin, Texas, 2000, pp. 578-584.
3. Jandric, Z. and Kovacevic, R. New way of process parameters optimization in SFF based on deposition by welding. In Proceedings of the 12th Annual Solid Freeform Fabrication Symposium, Austin, Texas, 2001, pp. 110-119.
4. Baker, R. Method of making decorative articles. US Pat. 1,533,300, 1925.
5. Kovacevic, R. Rapid manufacturing of functional parts based on deposition by welding and 3D laser cladding. In Procedures of the MoldMaking Conference, 3-5 April 2001, pp. 263-276 (presented by the MoldMaking Technology Magazine).
6. Mort, D. and Hood, B. Apparatus for continuously cladding a dished surface. US Pat. 4,149,061, 1979.
7. Million, K. and Zimmermann, H. Method and apparatus for manufacturing a tube bend metal. US Pat. 4,517,434, 1985.
8. Bronowski, H. Device for building up a workpiece by deposit welding. US Pat. 4,621,762, 1986.
9. Million, K. and Zimmermann, H. Method of preparing structural components having a symmetrically curved wall by buildup welding. US Pat. 4,671,448, 1987.
10. Edmonds, D. P. and McAninch, M. D. Method and apparatus for building a workpiece by deposit welding. US Pat. 4,775,092, 1988.
11. Doyle, T. E., Edmonds, D. P., McAninch, M. D. and Ryan, P. M. Method and apparatus for building a workpiece by deposit welding. US Pat. 4,842,186, 1989.
12. Buhrmaster, C. L., Clark, D. E. and Smartt, H. B. Apparatus for gas-metal arc deposition. US Pat. 5,052,331, 1991.
13. Prinz, F. B. and Weiss, L. E. Method and apparatus for fabrication of three-dimensional metal articles by weld deposition. US Pat. 5,207,371, 1993.
14. Aleshin, S. Method for depositing material on the tip of a gas turbine engine airfoil using linear translational welding. US Pat. 5,160,822, 1992.
15. Schneebeli, F., Braun, O., Tanner, B. and Dekumbis, R. Method of production of workpieces by welding equipment. US Pat. 5,233,150, 1993.
16. Spencer, J. D. and Dickens, P. M. Production of metal parts featuring heavy sections using 3D welding. In Proceedings of the 1st National Conference on Developments in Rapid Prototyping and Tooling (Ed. G. Bennett), Buckinghamshire College, 1995, pp. 127-137.
17. Norman, R. D. and Dickens, P. M. 3D welding fabrication: strategies for sloped surfaces. In Proceedings of the 1st National Conference on Developments in Rapid Prototyping and Tooling (Ed. G. Bennett), Buckinghamshire College, 1995, pp. 51-65.
18. Ribero, D. A. and Norrish, J. Rapid prototyping process using metal directly. In Proceedings of 7th Solid Freeform Fabrication Symposium, 1996, pp. 249-256.
19. Ksiazkiewicz, R. and Gustafson, N. Robotic GTAW may prove key to higher gas turbine engine production. Weld. J., December 1996, 75(12), 33-37.
20. Krause, F. L., Ciesla, M., Stiel, C. and Ulbrich, A. Enhanced rapid prototyping for faster product development processes. Ann. CIRP, 46(1), 93.
21. Song, Y. A., Park, S., Hwang, K., Choi, D. and Jee, H. 3D welding and milling for direct prototyping of metallic parts. In Proceedings of the 9th Solid Freeform Fabrication Symposium, Austin, Texas, 1998, pp. 495-501.
22. Kovacevic, R. and Beardsley, H. E. New rapid prototyping technique based on 3-D welding. In Proceedings of the 31st CIRP International Seminar on Manufacturing Systems, May 1999, technical paper PE99-126, pp. 1-5 (Society of Manufacturing Engineers, Dearborn, Michigan).
23. Jandric, Z., Kmecko, I. S. and Kovacevic, R. Dynamic modeling of GTAW for rapid manufacturing. In Proceedings of the 11th International Conference on Computer Technology in Welding, NIST Special Publication 973, Columbus, Ohio, 5-9 December 2001.
24. Rosenthal, D. The theory of moving sources of heat and its application to metal treatments. Trans. ASME, 1946, 68(11), 849-866.
25. Rykalin, N. N. Calculation of Heat Process in Welding, 1960 (Mashgiz, Moscow).
26. Friedman, E. Thermodynamic analysis of the welding process using the finite elements method. Trans. ASME, J. Pressure Vessel Technol., 97, 206-213.
27. Rykalin, N. N. and Nikolaev, A. V. Welding arc heat flow. Weld. World, 1971, 9(3-4), 112-132.
28. Pavelic, V. Weld puddle shape and size correlation in a metal plate welded by the GTA process. In Arch. Physics and Weld Pool Behaviour: An International Conference, The Welding Conference, 1979, pp. 251-258.
29. Beuth, J. L. and Narayan, S. H. Residual stress-driven delamination in deposited multi-layers. Int. J. Solids Structcs, 1996, 33(1), 65-78.
30. Hu, Z., Labudovic, M., Wang, H. and Kovacevic, R. Computer simulation and experimental investigation of sheet metal bending using laser beam scanning. Int. J. Mach. Tools Mf., 2001, 41, 589-607.
31. Bonifaz, E. A. Finite element analysis of heat flow in single-pass arc welds. Weld. J., May 2000, 79(5), 121s-125s.
32. Kamtekar, A. G., Little, G. H. and Ji, T. An efficient finite element model for calculating transient temperatures during welding. Part I: procedure. Computer Modeling and Simulation in Engng: CMSE, 1998, 3(2), 75-86.
33. Little, G. H., Ji, T., Kamtekar, A. G. and Bani, S. B. An efficient finite element model for calculating transient temperatures during welding. Part II: applications. Computer Modeling and Simulation in Engng: CMSE, 1998, 3(2), 87-97.
34. Radaj, A., Christensen, N., DuPont, J. N. and Marder, A. R. Thermal efficiency of arc welding process. Weld. J., December 1995, 74(12), 406s-416s.
35. Myers, P. S., Uyehara, O. A. and Borman, G. L. Fundamentals of heat flow in welding. Weld. Res. Counc. Bull., July 1967, 123.
36. Brown, S. B. and Song, H. Implications of three-dimensional numerical simulations of welding of large structures. Weld. J., 1992, 71(2), 55s-62s.
37. Kim, C. S. Technical Report ANL-75-55, Argonne National Laboratory, Argonne, Illinois, 1994, pp. 1-24.
38. Kamala, V. and Goldak, J. A. Error due to two dimensional approximation in heat transfer analysis of welds. Weld. J., September 1993, 72(9), 440s-446s.
39. Kmecko, I. S., Jandric, Z. and Kovacevic, R. Influence of geometrical factor on heat conduct rate during GTAW for welding-based deposition. In Proceedings of the ASME Symposium on Nontraditional Manufacturing Research and Application, New York, 11-16 November 2001 (American Society of Mechanical Engineers, New York).