Tool length-dependent stability surfaces

Machining Science and Technology

Volumn 8, Issue 3, 2004, Pages 377-397

  Schmitz, Tony L ^a   Burns, Timothy J ^b   Ziegert, John C ^a   Dutterer, Brian ^c   Winfough, W R ^d  

^a UNIVERSITY OF FLORIDA   (United States)

^b Mathematical Division

^c NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^d Bourne and Koch Machine Tool Co   (United States)

Author keywords

Milling; Receptance coupling; Stability; Tool tuning

Indexed keywords

FREQUENCY RESPONSE; INTEGRATION; MACHINE VIBRATIONS; MATHEMATICAL MODELS; MILLING (MACHINING); STABILITY; STRUCTURAL ANALYSIS; TIME DOMAIN ANALYSIS;

MILLING STABILITY; MODE COUPLING EFFECT; RECEPTANCE COUPLING; TOOL TUNING;

MACHINE TOOLS;

EID: 9744233825     PISSN: 10910344     EISSN: None     Source Type: Journal    
DOI: 10.1081/MST-200038989     Document Type: Article

References (49)

1. Altintas, Y. (2001). Analytical prediction of three dimensional chatter stability in milling. Japan society of mechanical engineers. International journal series C: mechanical systems. Machine Elements and Manufacturing 44(3):717-723.
2. Altintas, Y., Budak, E. (1995). Analytical prediction of stability lobes in milling. Annals of the CIRP 44(1):357-362.
3. Arnold, R. N. (1946). The mechanism of tool vibration in the cutting of steel. Proceedings of the Institution of Mechanical Engineers 154(4):261-284.
4. Balachandran, B. (2001). Non-linear dynamics of milling process. Philosophical Transactions of the Royal Society of London A 359:793-819.
5. Bayly, P., Schmitz, T., Peters, D., Mann, B., Stépán, G., Insperger, T. (2002). Effects of radial immersion and cutting direction on chatter instability in end-milling. In: Proceedings of ASME International Mechanical Engineering Congress and Exposition. New Orleans, LA, IMECE2002-34116.
6. Bayly, P. V., Halley, J. E., Mann, B. P., Davies, M. A. (2001). Stability of interrupted cutting by temporal finite element analysis. In: Proceedings of the 18th Biennial Conference on Mechanical Vibration and Noise. DETC2001/VIB-21581, ASME Design Engineering Technical Conferences. Pittsburgh: PA, September 9-13.
7. Bishop, R. E. D., Johnson, D. C. (1960). The Mechanics of Vibration. Cambridge, UK: Cambridge University Press.
8. Budak, E., Altintas, Y. (1998). Analytical prediction of chatter stability conditions for multi-degree of freedom systems in milling, Part I: modeling, Part II: applications. Journal of Dynamic Systems, Measurement and Control 120:22-36.
9. Corpus, W. T., Endres, W. J. (year). A high order solution for the added stability lobes in intermittent machining. In: Proceeding of the Symposium on Machining Processes. Orlando, FL, 871-878, MED-11.
10. Davies, M., Balachandran, B. (2000). Impact dynamics in milling of thin-walled structures. Nonlinear Dynamics 22:375-392.
11. Davies, M., Dutterer, B., Pratt, J., Schaut, A. (1998). On the dynamics of high-speed milling with long, slender endmills. Annals of the CIRP 47(1):55-60.
12. Den Hartog, J. P. (1956). Mechanical Vibrations. 4th ed. New York: McGraw-Hill Book Co., Inc.
13. Duncan, W. J. (1947). Mechanical Admittances and their Applications to Oscillation Problems. London: Ministry of Supply, Aeronautical Research Council Reports and Memoranda No. 2000, His Majesty's Stationery Office.
14. Ferreira, J., Ewins, D. (1995). Nonlinear receptance coupling approach based on describing functions. In: Proceedings of the 14th International Modal Analysis Conference. Dearborn, MI, 1034-1040.
15. Fofana, M., Bukkapatnam, S. (2001). A nonlinear model of machining dynamics. In: Proceedings of the 18th Biennial Conference on Mechanical Vibration and Noise, ASME, Design Engineering Technical Conferences. Pittsburgh, PA, September, 9-13; DETC2001/VIB-21582.
16. Grabec, I. (1988). Chaotic dynamics of the cutting process. International Journal of Machine Tools and Manufacture 28:19-32.
17. Hanna, N. H., Tobias, S. A. (1974). A Theory of nonlinear regenerative chatter. Journal of Engineering for Industry 96:247-255. http://www.schunk-usa. com/hmhs/home.html.
18. Insperger, T., Stépán, G. (2002). Semi-discretization method for delayed systems. International Journal of Numerical Methods in Engineering 55(5):503-518.
19. Jensen, S., Shin, Y. (1999). Stability analysis in face milling operations, Part 1: theory of stability lobe prediction. Journal of Manufacturing Science and Engineering 121(4):600-605.
20. Kalmar-Nagy, T., Pratt, J. R., Davies, M. A., Kennedy, M. (1999). Experimental and analytical investigation of the subcritical instability in metal cutting. In: Proceedings of the 17th Biennial Conference on Mechanical Vibration and Noise, ASME Design and Technical Conferences. Las Vegas, NV, September 12-16.
21. Kegg, R. L. (1965). Cutting dynamics in machine tool chatter. Journal of Engineering for Industry 87(4):464-470.
22. Koenisberger, F., Tlusty, J. (1967). Machine Tool Structures: Stability Against Chatter. Pergamon Press, Vol. I.
23. Merrit, H. (1965). Theory of self-excited machine tool chatter. Journal of Engineering for Industry 87(4):447-454.
24. Minis, I., Yanushevsky, T., Tembo, R., Hocken, R. (1990). Analysis of linear and nonlinear chatter in milling. Annals of the CIRP 39(1):459-462.
25. Nayfeh, A. H., Chin, C.-M., Pratt, J. (1997). Applications of perturbation methods to tool chatter dynamics. Dynamics and Chaos in Manufacturing Processes. New York: Wiley.
26. Pratt, J., Davies, M. A., Evans, C. J., Kennedy, M. (1999). Dynamic interrogation of a basic cutting process. Annals of the CIRP 48(1):39-42.
27. Roa, B., Shin, Y. C. (1999). A comprehensive dynamic cutting force model of chatter prediction in turning. International Journal of Machine Tools and Manufacture 39(10):1631-1654.
28. Schmitz, T. (2002). Automatic trimming of machining stability lobes. International Journal of Machine Tools and Manufacture 42:1479-1486.
29. Schmitz, T., Donaldson, R. (2000). Predicting high-speed machining dynamics by substructure analysis. Annals of the CIRP 49(1):303-308.
30. Schmitz, T., Davies, M. (2001). Tool point frequency response prediction for high-speed machining by RCSA. Journal of Manufacturing Science and Engineering 123:700-707.
31. Schmitz, T., Burns, T. (2003). Receptance coupling for high-speed machining dynamics prediction. In: Proceedings of the 21st International Modal Analysis Conference. Kissimmee, FL, February 3-6 (on CD).
32. Schmitz, T., Davies, M., Medicus, K., Snyder, J. (2001). Improving high-speed machining material removal rates by rapid dynamic analysis. Annals of the CIRP 50(1):263-268.
33. Shridar, R., Hohn, R. E., Long, G. W. (1968). A stability algorithm for the general milling process. Journal of Engineering for Industry 90:330.
34. Smith, S., Tlusty, J. (1990). Update on high-speed milling dynamics. Journal of Engineering for Industry 112:142-149.
35. Smith, S., Tlusty, J. (1991). An overview of modeling and simulation of the milling process. Journal of Engineering for Industry 113:169-175.
36. Smith, S., Tlusty, J. (1993). Efficient simulation programs for chatter in milling. Annals of the CIRP 42(1):463-466.
37. Smith, S., Winfough, W., Halley, J. (1998). The effect of tool length on stable metal removal rate in high-speed milling. Annals of the CIRP 47(1):307-310.
38. Smith, S., Jacobs, T. P., Halley, J. (1999). The effect of drawbar force on metal removal rate in milling. Annals of the CIRP 48(1):293-296.
39. Stépán, G. (1989). Retarded Dynamical Systems: Stability and Characteristic Functions. UK: Longman, Harlow.
40. Stépán, G., Kalmar-Nagy, T. (1997). Nonlinear regenerative machine tool vibrations. In: Proceedings of the 16th Biennial Conference on Mechanical Vibration and Noise, ASME, Design Engineering Technical Conferences. Sacramento, CA, September, 14-17; DETC97/VIB-4021.
41. Taylor, F. W. (1907). On the art of cutting metals. Transactions of ASME 28:31-350.
42. Tlusty, J. (1985). Dynamics of high-speed milling. In: King, R. I., ed. Handbook of High-Speed Machining Technology. New York: Chapman and Hall, 48-153.
43. Tlusty, J., Polocek, M. (1963). The stability of the machine-tool against self-excited vibration in machining. In: Proceedings of the International Research in Production Engineering Conference. Pittsburgh, PA, New York: ASME, 465.
44. Tlusty, J., Zaton, W., Ismail, F. (1983). Stability lobes in milling. Annals of the CIRP 32(1):309-313.
45. Tlusty, J., Smith, S., Winfough, W. (1996). Techniques for the use of long slender end mills in high-speed machining. Annals of the CIRP 45(1):393-396.
46. Tobias, S. A. (1965). Machine-Tool Vibration. Glasgow, Scotland: Blackie and Sons Ltd.
47. Tobias, S. A., Fishwick, W. (1958a). The chatter of lathe tools under orthogonal cutting conditions. Transactions of the ASME 80:1079.
48. Tobias, S. A., Fishwick, W. (1958b). Theory of regenerative machine tool chatter. The Engineer. 205.
49. Trent, E. M., Wright, P. K. (2000). Metal Cutting. 4th ed. Table 7.2. Woburn, MA: Butterworth-Heinemann.