Effects of low-cycle fatigue on bending properties and fracture toughness of un-HIP'ed Ti-47Al-2Cr-2Nb-1B intermetallic

International Journal of Fatigue

Volumn 27, Issue 2, 2005, Pages 143-153

  Marino, Francesco ^a   Rebuffo, A ^b   Sorrentino, F ^c  

^a POLITECNICO DI TORINO   (Italy)

^b Phitec Ingegneria Srl   (Italy)

^c OSVAT Srl   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING (DEFORMATION); CERAMIC MATERIALS; COMPOSITION; CRUCIBLES; FRACTURE TOUGHNESS; HOT ISOSTATIC PRESSING; INTERMETALLICS; METALLOGRAPHIC MICROSTRUCTURE; PLASMA SPRAYING; PLASTIC DEFORMATION; STRENGTH OF MATERIALS; VACUUM;

CARAMIC CRUCIBLES; FATIGUE RESISTANCE; VACUUM INDUCTION MELTING (VIM);

FATIGUE OF MATERIALS;

EID: 9644294524     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2004.06.006     Document Type: Article

References (30)

1. Kim YW. Effects of microstructure on the deformation and fracture of gamma-TiAl alloys. Mater Sci Eng 1995;A 192/193: 519-33.
2. Gnanamoorthy R, Mutoh Y, Mizuhara Y. Fatigue crack growth behavior of equiaxed, duplex and lamellar microstructure gamma-base titanium aluminides. Intermetallics 1996;4:525-32.
3. Recina V, Karlsson B. Tensile properties and microstructure of Ti-48Al-2W-0.5Si gamma-titanium aluminide at temperatures between room temperature and 800°C. Mater Sci Technol 1999; 15:57-66.
4. Chan KS. Understanding fracture toughness in gamma TiAl. JOM 1992;44(5):30-8.
5. Yamaguchi M, Inui HS, Yokoshima K, Kishida D, Johnson R. Recent progress in our understanding of deformation and fracture of two-phase and single-phase Ti-Al alloys. Mater Sci Eng 1996;A213:25-31.
6. Chan KS. The fatigue resistance of TiAl-based alloys. JOM 1997;49(7):53-8.
7. Kim YW. Ordered intermetallic alloys, part III: gamma titanium aluminides. JOM 1994;46(7):30-40.
8. Dowling Jr WE, Worth BD, Allison JE, Jones JW. In: Kim YW, et al., editors. Microstructure/property relationships in titanium aluminides and alloys. Warrendale, PA, USA: TMS; 1991. p. 123-133.
9. Chan KS, Shih DS. Fundamental aspects of fatigue and fracture in a TiAl sheet alloy. Metall Mater Trans A 1998;29A(1):73-87.
10. Shih DS, Huang SC, Scarr GK, Jang H, Chesnutt JC. In: Kim YW, et al., editors. Microstructure/property relationships in titanium aluminides and alloys. Warrendale, PA, USA: TMS; 1991. p. 135-148.
11. Kruzic J, Campbell JP, Ritchie RO. Fatigue-crack propagation in gamma-based titanium aluminide alloys at large and small crack sizes. Proceedings of the MRS Fall Meeting, Boston, USA, 552, 1998. p. 2.3.1-2.3.7.
12. Kwai S, Chan KS, Donald S, Shih DS. Fatigue and fracture behavior of a fine-grained lamellar TiAl alloy. Metall Mater Trans A 1997;28A(1):79-90.
13. Choi C, Lee Y, Lee CS. Microstructural influence on the fatigue crack propagation of a gamma-TiAl alloy. Scripta Mater 1997;36(7):821-7.
14. Soboyejo WO, Aswath PB, Mercer C. Cyclic deformation and fracture mechanisms in a gamma-based titanium aluminide intermetallic. In: Soboyejo WO, et al., editors. Fatigue and fracture of ordered intermetallic materials, II. Warrendale, PA, USA: TMS; 1995. p. 57-84.
15. Lerch BA. Effect of defects on the fatigue life of gamma-TiAl. HITEMP Rev 1999;2:1-11 NASA CP-1999-208915.
16. Nazmy M, Staubli M, Onofrio G, Lupine V. Surface defect tolerance of a cast TiAl alloy in fatigue. Scripta Mater 2001;45:787-92.
17. Rebuffo A. Comportamento meccanico di un materiale intermetallico per la realizzazione di valvole destinate a motori endotermici. Thesis, Politecnico di Torino, Torino, Italy, 1997.
18. Larsen DE, Kampe S, Christodoulou L. Microstructure morphology effects on fracture toughness of cast gamma titanium aluminides. Proceedings of the MRS Symposium, 194, 1990. p. 285-292.
19. Soboyejo WO, Schwartz DS, Sastry SML. An investigation of the fracture behavior of gamma-based titanium aluminides: effects of annealing in the alfa + gamma and alfa2 + gamma phase fields. Metall Trans A 1992;23A:2039-59.
20. Pancheri P, Bosetti P, Dal Maschio R, Sglavo VM. Production of sharp cracks in ceramic materials by three point bending of sandwiched specimens. Eng Fract Mech 1997;59(4):445-7.
21. Schwartz DS, Shih DS. The influence of boron addition in cast Ti-47Al-2Cr-2Nb-0.8B. Proceedings of the MRS Symposium, Pittsburgh, PA, USA, 364, 1995. p. 787-791.
22. Godfrey AB, Loretto MH. The nature of complex precipitates associated with the addition of boron to a gamma-based titanium aluminide. Intermetallics 1996;4:47-53.
23. Liu CT, Schneibel JH, Maziasz PJ, Wright JL, Easton DS. Tensile properties and fracture toughness of TiAl alloys with controlled microstructures. Intermetallics 1996;4:429-40.
24. Huang SC, Hall HL. Plastic deformation and fracture of binary TiAl-base alloys. Metall Trans A 1991;22A:419-27.
25. Campbell JP, Venkateswara Rao KT, Ritchie RO. The effect of microstructure on fracture toughness and fatigue crack growth in γ-titanium aluminide based intermetallics. Metall Mater Trans A 1999;30A:563-77.
26. Dogan B, Schöneich D, Schwalbe KH, Wagner R. Fatigue precracking and fracture toughness testing of TiAl intermetallics. Intermetallics 1996;4:61-9.
27. Umakoshi Y, Yasuda HY, Nakano T. Plastic anisotropy and fatigue of TiAl PST crystals: a review. Intermetallics 1996;4: S65-S75.
28. Umakoshi Y, Yasuda HY, Nakano T. Plastic anisotropy and fracture behavior of cyclically deformed TiAl polysynthetically twinned crystals. Mater Sci Eng 1995;A192/193:511-7.
29. Bowen P, Rogers NJ, James AW. Fracture and fatigue of cast gamma TiAl based aluminides. Proceedings of the Conference on Gamma Titanium Aluminides. Las Vegas, NV, February. Warrendale, PA, USA: TMS; 1995. p. 849-865.
30. Kuang JP, Harding RA, Campbell J. Microstructures and mechanical properties of an investment cast gamma titanium aluminide. Mater Sci Technol 1999;15:840-50.