The effect of mechanical treatment on softwood kraft pulp fibers. Fiber surface layer

Paperi ja Puu/Paper and Timber

Volumn 86, Issue 7, 2004, Pages 508-513

  Joutsimo, Olli ^a   Robertsén, Leif ^a  

^a KCL   (Finland)

Author keywords

Fiber; Kraft pulping; Mixing; Reinforcement; Softwood; Strength properties; Surface

Indexed keywords

FIBERS; HIGH TEMPERATURE EFFECTS; MIXING; REINFORCEMENT; SOFTWOODS; STRENGTH OF MATERIALS; SURFACES;

FIBER DEFORMATIONS; FIBER SURFACE LAYERS; IMMUNOLABELLING; POLYMORPHS;

KRAFT PULP;

FIBERS; HIGH TEMPERATURE; KRAFT PULPING; KRAFT PULPS; MECHANICAL PROPERTIES; MIXING; REINFORCEMENT; SOFTWOODS; SURFACES;

EID: 9144258151     PISSN: 00311243     EISSN: None     Source Type: Trade Journal    
DOI: None     Document Type: Article

References (34)

1. Hägglund, E.: Om fiberstrukturens förändring vid vissa slag av sulfit- och sulfatkokningar Svensk Papperstidn. 38(1935): 5, 145-154.
2. Knutson, T., Stockman, L.: The Effect of Treatment During the Final Stages of the Cook on the Beating Properties and Strength of Sulphate pulp. Tappi J. 41(1958):11, 704-709.
3. Annergren, G. E., Öhrn, O. E, Rydholm, S. A.: Kraft pulp quality from batch and continuous cooking. Svensk Papperstidn. 66(1963):4, 110-114.
4. th Fundamental Research Symposium held Cambridge. 17-22 September 1989, ed. by C.F. Baker and V. W. Punton. Vol. 1. Mechanical Engineering Publications Limited, London, pp. 87-104.
5. Macleod, J.M., Cyr, M., Embley, D., Savage, P.: Where the strength is lost in kraft pulping of softwoods. J. Pulp Paper Sci. 13(1987):5, J87-J92.
6. MacLeod, J.M.: Pulp strength along the complete kraft pulp mill fiber lines. Tappi J. 78(1995):8, 153-160.
7. Page, D.H., Seth, R. S.: The elastic modulus of paper III. The effect of dislocations, microcompressions, curl and kinks. Tappi 63(1980) 10, 99-102.
8. Seth, R.S.: Zero-span tensile strength of paper making fibers. Pap. Puu 77 (2001):8, 597-604.
9. st Appita Annual General Conference, Melbourne, Australia, Apr. 28-May 2, 1997, Vol. 2, pp. 573-580.
10. Pihlava, M.: Fiber deformations and strength loss in kraft pulping of softwood. Licenciate Thesis, Helsinki University of Technology, 72 p., 1998.
11. Berggren, R., Berthold, F., Sjoholm, E., Lindstrom, M.: Fiber strength in relation to molecular mass distribution of hardwood kraft pulp.Degradation by ozone and acid hydrolysis. Nord. Pulp Pap. Res. J. 16(2001)4, pp 333-338.
12. Gurnagul, N., Page, D. H., Paice, M.G.: The effect of cellulose degradation on the strength of pulp wood fibers. Nordic Pulp Pap. Res. J. 7(1992):3, 152-154.
13. th Biennial Johan Gullichsen Colloqium 2003, 10 September 2003, Espoo, Finland, pp. 25-31.
14. Joutsimo, O., Robertsén L.: Mechanical treatment of softwood kraft pulp fibres. Pulp and fibre properties. Paperi ja puu 86 (2004):5, 359-364.
15. th Annual meeting, Montreal, Canada, Feb. 1-2, 1979, pp. B111-B117.
16. Clarke, B.: Furnish blend optimization and evaluation. Paper Maker, 41 (1972):4, 38-39, 41.
17. Howard, R.C., Kropholler, H.K.: Bonding measurement by image analysis. Pulp Pap. Mag. Can., 81(1980)12, T334-T338.
18. Sloane, C. M.: A preliminary study of the effect of recycling on the bonding potential of unbleached radiata pine and Scandinavian spruce kraft pulps. Appita Annual General Conference, Melbourne, Australia, Apr. 19-23, 1993, Vol. 2, pp. 533-540.
19. Österberg, M.: On the Interactions in Cellulose Systems: Surface Forces and Adsorption. Doctoral thesis, KTH, Stockholm 2000, 63 p.
20. Pere, J., Lappalainen, A., Tenkanen, M.: Immunochemical methods for chemical mapping of fibres. Microscopy as a Tool in Pulp and Paper Research and Development, Stockholm, Sweden, 21-22 Junel999, p. 90.
21. Wägberg, L., Winter, L, Lindström, T,: Determination of ion-exchanged capacity of carboxymethylated cellulose fibers using colloid and conductometric titrations. Papermaking Raw Materials: Their interaction with the production processes and their effect on paper properties. Fundamental Research Symposium, Oxford, September 1985, ed. by V. Punton. Vol. 2, Mechanical Engineering Publ. Ltd. London, pp. 917-923.
22. Limä, T., Maunu, S-L., Hortling, B.: Solid State NMR Studies on Cellulose Crystallinity in Fines and Bulk Fibres Separated from Refined Kraft Pulp. Holzforschung. 54(2000)6, 618-624.
23. Seth, R.S.: Zero-span tensile strength of papermaking fibres, Pulp and Paper Research Institute of Canada, 85th Annual meeting, Montreal, Canada, 26-29 Jan.1999, Preprints A, pp. A161-A173.
24. Omholt, I.: The effects of curl and microcompresisons on the combination of sheet properties. Norwegian Pulp and Paper Research Institute, 1999 International Paper Physics Conference, San Diego, CA, USA, 26-30 Sept. 1999, pp. 499-515.
25. Page, D.H., Seth, R.S., Jordan, B.D., Barbe, M.C.: Curl, crimps, kinks and microcompressions in pulp fibers- their origin, measurements and significance. Paper making raw materials: their interaction with the production process and their effect on paper properties. Transactions of the 8th Fundamental Research Symposium, Oxford, September 1985, ed by V. Punton. Vol. 1, Mechanical Engineering Publ. Ltd. London, pp. 183-227.
26. Paavilainen, L.: Influence of fiber morphology and processing on the softwood sulphate pulp fiber and paper properties, Dissertation at Helsinki University of Technology, 1993, 155 p.
27. Stone. J. E., Scallan, A. M.: A structural model for the cell wall of water-swollen pulp fibers based on their accessibility to macromolecules. Cellulose Chem. Technol. 2(1968), 343-358.
28. Panula-Qntto. S.: Fractionation of unbleached softwood kraft pulp with wedge wire pressure screen and hydrocyclone, Licenciate Thesis, Helsinki University of Technology, 2003, 86 p.
29. Hamer, R.J.: The characterization of stock properties. Paper Technology, 15(1974):5, T153-T160.
30. Lindström, T.: Chemical factors affecting the behaviour of fibers during paper making. Nord. Pulp Pap. Res. J. 7(1992): 4, 181-192.
31. Laine, J.: The effect of cooking and bleaching on the surface chemistry and charge properties of kraft pulp fibers. Dissertation at Helsinki University of Technology, 1993, 55p.
32. Emerton, H. W.: Fundamentals of the beating process, British Paper and Board Industry Research Association, Kenley 1957, 198 p.
33. Scallan, A.M.: The effect of acidic groups on the swelling of pulps: A review. Tappi J. 66(1983):11, 73-75.
34. 1. Jpn. Wood Res. Soc. 43(1997)4, 337-34