Carbon based refractories

Journal of the Ceramic Society of Japan

Volumn 112, Issue 1310, 2004, Pages 517-532

  Ewais, Emad Mohamed M ^a  

^a CENTRAL METALLURGICAL RESEARCH AND DEVELOPMENT INSTITUTE CMRDI   (Egypt)

Author keywords

Alumina; Antioxidants; Application; Bonding; Carbon; Chemical; Dolomite; Graphite; Magnesia; Manufacturing; Mechanical; Physical; Refractories; Thermal; Zirconia

Indexed keywords

ALUMINA; ANTIOXIDANTS; BONDING; CARBON; GRAPHITE; MAGNESIA; THERMAL CONDUCTIVITY; THERMAL EXPANSION; ZIRCONIA;

CHEMICAL; DOLOMITE; MECHANICAL; PHYSICAL; THERMAL;

REFRACTORY MATERIALS;

EID: 9144224876     PISSN: 09145400     EISSN: None     Source Type: Journal    
DOI: 10.2109/jcersj.112.517     Document Type: Review

References (167)

1. "Refractories manual," American Foundrymen's Society, Inc. Des Plaines, Illinois 60016-2277 (1989).
2. Shaw, K., "Classification of refractories," Hand book of refractories and their uses, Applied Science Publishers Ltd., London (1972) pp. 74-75.
3. Refractories products-classification of dense shaped refractory products, ISO 1109 (1975).
4. Classification of shaped heat-insulating refractory products, ASTMC155-88(92).
5. Coope, B., "The world magnesia industry," Ind. Min., [2], 21-31 & 43-48 (1987).
6. Routschka, G. and Barthel, H. "Classification," Pocket manual refractory materials, Vulkan-Verlag, Essen/Germany (1997) pp. 6-9.
7. Classification of dense shaped refractory products, BS EN 12475-1: (1998) and BS 57225-1.2: (1998).
8. Classification of dense shaped refractory products-Special products, BS EN 12475-4: (1999).
9. Routschka, G. and Barthel, H., "Refractory Base Materials," Pocket Manual Refractory Materials, Vulkan-Verlag, Essen/Germany (1997) pp. 2-2.
10. Semler, C. E., Ceramic Industry, [8], pp. 52-53 (1998).
11. Semler, C. E., Ceramic Industry, [2], pp. 44-47 (2000).
12. Nagruse, Y., Transactions ISIJ, Vol. 24, pp. 785-798 (1984).
13. Semler, C. E., The ongoing evolution of refractories technology, "http://www.ceramic-journals.com/english/objekte/ cn00_1.htm" (2000).
14. Shaw, K., "Carbon and graphite," Handbook of Refractories and their uses, Applied Science Publishers Ltd., London (1972) pp. 140-145.
15. Cooper, C. F., Refract J. Vol. 6 (1980).
16. Russell, F. S., Refract. J., Vol. 6, pp. 7-10 (1982).
17. Cooper, C. F., Chem. Ind., Vol. 18, pp. 678-685 (1982).
18. Ho, C. Y., Powell, R. W. and Liley, P. E., J. of Physical and Chemical Reference Data, Vol. 1, pp. 279-429 (1972).
19. Bauer, J. B., Schmidt-Whitley, R. D., Dumas, D., Du Mesnildot, B. and Kiehl, J. P., "New solutions for problem areas of blast furnace linings," Interceram., Special Issue, pp. 25-32 (1983).
20. Piel, K. T., "Carbon and graphite bricks/blocks," Pocket manual refractory materials, Vulkan-Verlag, Essen/Germany (1997) pp. 69-74.
21. Elderfield, R. N., "Blast-furnace refractories: Blast-furnace carbon: A reappraisal," ISI publication 116, London (1968) pp. 25-35.
22. Chester, J. H., "Refractories: Production and properties," Handbook published the iron and steel institute, London (1973).
23. Mortl, G. and Starzacher, A., "Lining proposals for hearth and hearth wall of blast furnaces," Interceram, Special Issue, pp. 72-75 (1983).
24. Wilkening, S., "Some of topical problems of the carbon lining of the blast furnaces," AIME Iron making proc., Vol. 36 (1979).
25. Miyamoto, M., Onoye, T. and Anarita, K., "Effect of alkalis and zinc on the wear of blast furnace refractories and tuyere displacement," Transaction ISIJ, Vol. 21, pp. 839-845 (1981).
26. McKee, D. W. and Chatterji, D., Carbon, Vol. 16, pp. 53-57 (1987).
27. Krol, L., "Characterisic of the destructive action of alkalis on blast furnace carbon and graphite lining," AIME Iron Making Proc., Vol. 37 (1978).
28. Chester, J. H., "Refractories for iron-and steelmaking," Handbook published the metals society, London (1974).
29. Barthel, H., "Carbon-containing magnesia and magnesia-carbon bricks," Pocket Manual Refractory Materials, Vulkan-Verlag, Essen/Germany (1997) pp. 139-152.
30. Blakeley T. H. and Earp, F. K., "Tars and pitches as binders for carbon and graphite," Industrial carbon and graphite, London, 24th-26th September (1957) pp. 173-177.
31. Hughes, R. H. and Morena, R., "Pitch bonded refractory," United state patent No. 4, 184, 883, January 22 (1980) pp. 1-14.
32. Bowman, R. C., Lang, E. J. and Grazen, F. S., "Resin composition and process for bond solid particles," US Patent No. 3, 852, 232, December 3 (1974) pp.1-16.
33. Gardziella, A., Suren, J. and Belsue, M., Interceram, Vol. 41 [7/8], pp. 461-467 (1992).
34. Geber, A. H., "Mixtures of phenolic novalacks for use with refractory aggregates and methods for making same," US Patent No. 5, 760, 104, June 2 (1998) pp. 1-22.
35. Geber, A. H., "Curative for phenolic novalacs," US Patent No. 6, 046, 252, April 4 (2000) pp. 1-15.
36. Suren, J., Gardziella, A. and Wandschneider, P., Interceram, Vol. 39[Sir],pp. 57-63 (1990).
37. Zoglmeyr, G., Interceram, Vol. 42[3], pp. 145-149 (1993).
38. Lyer, R. and Shah, R. C., "Phenolic resin binders for foundry and refractory uses," US Patent 4, 740, 535, April 26 (1988) pp. 1-15.
39. Barthel, H. and Kaltner, E., "The effect of carbon in carbon-containing magnesia bricks on the wear in basic oxygen furnaces," Reprint 1st Int. Conf. Refract., Tokyo (1983) pp. 91-104.
40. Itotagawa, S., Hashimoto, S. and Munekane, K., Refractories (Tokyo), Vol. 46[1], pp. 18-21 (1994).
41. Itotagawa, S., Hashimoto, S. and Munekane, K., Taikabutsu Overseas, Vol. 45[2], pp. 38-41 (1995).
42. Torigoe, A., Tada, H., Nomura, O. and Otani, T., Refractories (Tokyo], Vol. 48[11], pp. 598-598 (1996).
43. Yamamura, T., Nomura, O., Tada, H. and Torigoe, A., "Carbon- containing refractory and process for producing the same, "US Patent No. 6, 136, 227, October 24 (2000) pp.1-12.
44. Ruh, E., "Magnesia-carbon refractories, history, development, types & applications," International Ceramic Monographs, Vol. 1[2], pp. 772-793 (1994).
45. Spencer, D. R. F., Refract. J., Vol. 3, pp. 12-13 (1979).
46. Hardly, C. W. and Warman, M. O., "BOS vessel linings-experience with magnesia carbon in the united kingdom," Radex-Rrundsch., Vol. 3-4, pp. 457-463 (1987).
47. Kasai, K., "Recent advances in refractories technology for steelmaking," Nippon Steel Technical Report, Vol. 61, pp. 83-89 (1994).
48. Ruh, E., et al, International Ceramic Monographs, Vol. 1 [2], pp. 772-793 (1994).
49. Classification of dense shaped refractory products-Basic containing less than 7% residual carbon, BS EN 12475-2: (1998) and BS 7225-1-1.3: (1998).
50. Classification of dense shaped refractory products-Basic containing from 1% to 30% residual carbon, BS EN 12475-3: (1998) and BS 7225-1-1.4: (1998).
51. Riepl, K. and Barthel, H., "Large-crystal magnesia clinker for advanced refractories, an update and overview," UNITCER'91 Proc. Achen, 2nd ed. (1991) pp. 97-102.
52. Jhunjhunwala, R., Sahu, M. M. and Mishra, R., "Magnesia carbon refractories-The proven lining material for basic oxygen furnaces," Proceedings of International Symposium on Refractories: Refractory raw Materials & High Temperature Performance Refractory Products, August (1988) pp. 475-488.
53. Watanabe, A., Okamura T. and Saeki, G., "Carbon-bonded magnesia carbon bricks," US Patent No. 4, 431, 745, February 14 (1984) pp. 1-7.
54. Matsui, K. and Kawano, F., Refractories (Tokyo), Vol. 45 [6], pp. 555-566 (1993).
55. Matsui, K. and Kawano, F., Taikabutsu Overseas, Vol. 44[1], pp. 3-12 (1994).
56. Wolfert, A., Van Gaans, C. H. and Roovers, A., Trans. Indian. Ceram. Soc., Vol. 52[3], pp. 100-105 (1993).
57. Cooper, C. F., Can. Ceram. Q./J. Can. Ceram. Soc., Vol. 63 [3], pp. 197-208 (1994).
58. Kenan, W., "Graphite in refractories, past, present and future," Ind. Miner., [312], pp. 73-75 (1993).
59. Li, X. and Rigaud, M., "Effect of graphite quality on oxidation and corrosion resistance of magnesia-carbon refractories," Advances in refractories for the metallurgical Industries, II Proc. Int. Symp. Montreal, 24-29 August (1996) pp. 95-108.
60. Mikami, H. M. and Martinet, J. R., "Carbon-magnesia bricks in electric arc furnaces," Refract. J., pp. 25-32 (1979).
61. Landy, R. A., Darroud, T. and Hughes, R. H., Indust. Heat ing, April (1982).
62. Hayashi, T., "Recent trends in Japanese refractories technology," Transaction ISIJ, Vol. 21, pp. 603-617 (1981).
63. Bell, D., "Thermal shock of magnesia-graphite refractories," UNITECR'91 Int. Technical Conf. Refractories. Global advances in refractories. Preprints, Achen, 23-26 September (1991) pp.342-344.
64. Ichikawa, K., Itoh, K., Sato, K. and Hoshiyama, Y., Taikabustu Overseas, Vol. 13[1], pp. 21-26 (1993).
65. Hoshiyama, Y., Nomura, O., Nishio, H. and Ichikawa, K., "Effect of pitch addition on MgO-C bricks," UNITECR'95 Congress. Proc. Unified Int. Tech. Conf. On refractories, 4th Biennial worldwide Conf. On Refractories, "Global development of refractories," Vol. 3. Kyoto, 19-22 November (1995) pp.132-139.
66. Hayashi, S., Takahashi, H., Watanabe, A. and Miura, Y., J. Ceram. Soc. Japan, Vol. 102, pp. 23-28 (1994).
67. Zhu, D. and Cui, S., "Effect of additives on the properties and formation of MgO dense layer in MgO-C permeable samples," Unitecr'95 Congress. Proc. Unified Int. Tech. on Refractories: 4th Biennial Worldwide Conf. on Refractories, "Global Development of Refractories," Vol. 3, pp. 164-170, Kyoto, November (1995) pp. 19-22.
68. Gerald, B. and Stefan, P., "New high performance refractories for BOF-vessels," Veitch-Radex Rundschau [2], pp. 3-14 (1996).
69. Lee, W. E., Zhang, S. and Sarpoolaky, H., "Different types of in situ refractories," Refractories Application and News, [5], pp. 3-4 (2002).
70. Watanabe, K., Yabuta, K., Okamoto, H. and Yamamoto, H., "Oxidation behavior of MgO-C bricks with various additives," Unitecr'95 Congress. Proc. Unified Int. Tech. on Refractories: 4th Biennial Worldwide Conf. on Refractories, "Global Development of Refractories," Vol. 3, Kyoto, 9-22 November (1995) pp. 100-107.
71. Hunold, K., Ceramic Industry, [2], pp. 34-42 (2000).
72. Faghihi, M. A. and Yamaguchi, A., J. Ceram. Soc. Japan, Vol. 110, pp. 699-702 (2002).
73. Taffin, C. and Poirier, J., Interceram, Vol. 43[5], pp. 354-460 (1994).
74. Castro, J. C. V., Scudeller, L. A., Varela, J. A., Longo, E. and Baldo, J. B., Interceram., Vol. 44[6], pp. 399-342 (1995).
75. Apostolopoulos, D., Frith, M. and Strawbridge, I., "Al/Mg alloy as antioxidant in magnesia-graphite refractories," Steel times, Vol. 222[1], pp. 11-18 (1994).
76. Tawara, M., Fujii, K., Taniguchi, T., Hatae, E., Yositomi, J., Harada, M. and Kikugawa, S., Refractories (Tokyo), Vol. 46 [8], pp. 422-423 (1994).
77. Suruga, T., Refractories (Tokyo), Vol. 46[5], pp. 269-276 (1994).
78. Jitsumori, Y., Yoshida, T. and Yamaguchi, A., "Effect of starting materials characteristics on microstructures and properties of magnesia carbon refractories," Unitecr'95 Congress. Proc. Unified Int. Tech. on Refractories: 4th Biennial Worldwide Conf. on Refractories, "Global Development of Refractories," Vol. 3, Kyoto, 19-22 November (1995) pp. 140-147.
79. Yamuguchi, A., Taikabutsu Overseas, Vol. 4[3], pp. 14-18 (1984).
80. Yamuguchi, A., Taikabutsu Overseas, Vol. 7[2], pp. 4-13 (1987).
81. Yamuguchi, A., Taikabutsu Overseas, Vol. 7[1], pp. 11-16 (1987).
82. Yamuguchi, A., Taikabutsu, Vol. 36[10], pp. 558-563 (1987).
83. Yamuguchi, A. and Tanaka, H., "Role and behaviour of non-oxide compound added carbon-containing refractories," UNITECR'93 Proceedings, pp. 32-38.
84. Rymon-Lipinski, T., "Reactions of metal additives in magnesia-carbon brick in an oxygen converter (Part 1: the possible reaction sequence in the system MgO-C-Al, MgO-C-Mg, and MgO-C-Si in various atmospheres)," Stahl Eisen, Vol. 108 [22], pp. 1049-1055 (1988).
85. Rymon-Lipinski, T., "Reactions of metal additives in magnesia-carbon brick in an oxygen converter (Part 2: formation of metal suboxides and magnesia vapor)," Stahl Eisen, Vol. 108[22], pp. 1055-1059 (1988).
86. Poirier, J. and Riguad, M. A., J. Can. Ceram. Soc., Vol. 62 [1], pp. 370-376 (1993).
87. Mapiravana, J., Argent, B. B. and Rand, B., "Reactions of silicon and aluminium in MgO-graphite composites: 1, Effects on porosity and micro structure," UNITECR'93 Proceedings (1993) pp. 251-253.
88. Leveque, J., Pairesse, P. and Schimdt-Whitley, R. D., "Converter linings compromising between performance and economy," in XXVIIth Int. Colloquium on refractories, Achen, Germany, Oct. (1984) pp. 109-143.
89. Karakus, M., Smith, D. J. and Moore, R. E., Veitsch-Radex Rundschau, Vol. 1, pp. 24-32 (2000).
90. Zhang, S., Marriott, N. J. and W. E. Lee, J. Eur. Ceram. Soc., Vol. 21, 1037-1047 (2001).
91. Zhang, S. and Lee, W. E., Int. Mat. Rev., Vol. 45[2], pp. 41-58 (2000).
92. Takanaga, S., Taikabutsu Overseas, Vol. 13[4], pp. 8-11 (1993).
93. Matsuo, A., Miyagawa, S., Ogasahara, K., Yokoi, M., Uchimura, R. and Kumagai, M., Taikabutsu Overseas, Vol. 5 [2], pp. 3-6 (1993).
94. Tamaki, K., Taikabutsu Overseas, Vol. 13, pp. 20-29 (1985).
95. Ikesue, A., Yamamoto, H., Shikano, H., Hiragushi, K. and Kataoka, S., Taikabutsu (Refractories), Vol. 40, pp. 535-535 (1988).
96. Baker, B. H. and Brenzny, B., in Proc. United Int. Tech. Conf. On 'Refractories', (UNITECR '93), Sao Paulo, Brazil, 1993, Association of Latin American Refractories Manufacturers (ALAFAR) pp. 241-247.
97. Asano, K., Interceram, Special Issue, pp. 77-79 (1985).
98. Zhang, S. and Lee, W. E., J. Eur. Ceram. Soc., Vol. 21, pp. 2393-2405 (2001).
99. Surugu, T., Taikabutsu, Vol. 46[5], pp. 269-276 (1994).
100. Evans, D., Quin, J. and Whiteley, P. G., "Magnesia graphite refractories for basic oxygen converters," Steel Technology International (1994) pp. 105-108.
101. Matthews, J. and Reeves, T., "Development and use of improved magnesia carbon refractories," Ceramics adding the value Vol.1 Austceram 92, Proc. Int. Ceramic Conf. Melbourne, Australian Ceramic Society (1992) pp. 261-266.
102. Carniglia, S. C., Am. Ceram. Soc. Bull., Vol. 52[2], pp. 160-165 (1973).
103. Banerjee, S., "Recent developments in steel-making refractories," UNITECR'01, Cancun, Mixico, Asociacion Latinoa-mericana de Fabricantes de Refractories, 4-7 November (2001) pp. 1033-1041.
104. 3-MgO-C and MgO-C bricks," 44th Int. Colloquium on Refeactories, Achen, Germany, 26-27 July (2001) pp. 43-46.
105. Mukai, K., Toguri, J. M., Stubina, N. M. and Yoshitomi, J., "A mechanism for the local corrosion of immersion nozzles," ISIJ Int., Vol. 29 [6], pp. 469-476 (1989).
106. Heikkinen, E., Kokkonen, T. and Riku, R., "The chemical wear of the steel ladle slagline due to sequential contact with molten steel and ladle slag," Nordic Symposium for young scientist on Production Metallurgy for Iron, Steel and Ferroalloys, Oulu, Finland, 11th-13th June (2003) and http:// pyomet.oulu.fi/sympo03/sessions22.htm.
107. Zhong, X.-C., Interceram, Vol. 44[2], pp. 105-110 (1995).
108. Zoglmeyr, G. and Komei, D., Interceram, Vol. 40[2], pp. 81-89 (1991).
109. Xing, S. and Liu, J. "Refractories for Iron and Steel Industry of China (Mainland)," China's Refract., Vol. 2[4], pp. 3-11 (1993).
110. Peaslee, K. D., Smith, J. D. and Fang, H., "Recycling/Reuse Technology for Spent Refractories from Steel Producers," Electric furnace Conference Proceedings (1998) pp.255-266.
111. Koltermann, M. and Bartha, P., "Recent trends of Unfired Energy Saving Refractories for the Steel Industry," Proceedings of International Symposium on Refractories: Refractory raw Materials & High Temperature Performance Refractory Products, August (1988) pp. 333-354.
112. Chatillon, J. H. and Schmidt-Whitley, R. D., "Clean Steel & A Clean Environment with Fired Dolomite," Proceedings of International Symposium on Refractories: Refractory raw Materials & High Temperature Performance Refractory Products, August (1988) pp. 433-451.
113. Wenclawiak, C. and Malker, G., "Basic Products in the Modern Steelmaking Process," Proceedings of International Symposium on Refractories: Refractory raw Materials & High Temperature Performance Refractory Products, August (1988) pp. 452-466.
114. Shipping, H. and Yulian, L., "The manufacture of Magnesite Dolomite Carbon Brick & Its Usage in BOF," Proceedings of International Symposium on Refractories: Refractory raw Materials & High Temperature Performance Refractory Products, August (1988) pp. 467-474.
115. Scheerer, P. E. and Stendera, J. W., "BOF Refractory Campaign Life in US and Canada Past, Present and future," Unitecr'95 Congress. Proc. Unified Int. Tech. Conf. On Refractories: 4th Biennial Worldwide Conf. on Refractories, "Global Development of Refractories," Vol. 3, Kyoto, 19-22 November (1995) pp. 17-24.
116. Rigaud, M., Bombard, P., Li, X. and Gueoult, B., "Phase Evaluation in Various Carbon-Bonded Basic refractories," Unticr'93 Congress Refractories for the New World Economy. Proc. Conf. Sao Paulo, Paulo, 31 October-3 November (1993) pp. 360-371.
117. Nabeshima, S., Suzuki, H., Imaiida, Y., Kanatani, T. and Kuga, M., "Improvement in Refractory of Top and Bottom converter(K-Bop) at Chiba No.1 Steelmaking Shop," Unitecr'95 Congress. Proc. Unified Int. Tech. on Refractories: 4th Biennial Worldwide Conf. on Refractories, "Global Development of Refractories," Vol. 3, Kyoto, 19-22 November (1995) pp. 25-32.
118. Kappmyer, K. K. and Hubble, D. H., "High temperature oxides," Ed. Alper, A. M., Academic Press, N. Y. and London, Part I, pp. 1-76 (1970).
119. Routscka, G., "The 27th International Colloquia on Refractories: refractories for Steelmaking converters," Aachen, October (1984), Cfi/Ber. Dkg, Vol. 62[1], pp. 51-56 (1985).
120. Meyer, W., Franchi, A., Buchebner, G. and Willingshofer, M., "The use of dolomite-carbon-lined adles for the production of superclean steels," Veitsch-Radex Rundschau, [2], pp. 32-44 (1998).
121. Ewais, E. M. M., Ahmed, A. M. and El-Sherif, A. A., J. Ceram. Soc. Japan, Vol. 110, pp. 931-938 (2002).
122. Heumannskamper, D., "Graphite containing crucible," Pocket Manual Refractory Materials, Vulkan-Verlag, Essen/Germany (1997) pp. 88-93.
123. Ross, G. E. and Brown, D. W., "Some metallurgical applications of carbon and graphite," Industrial Carbon and Graphite conference, London, 24-26th September (1957) pp. 618-624.
124. Bolshakova, N. V., "Among others: Properties of graphite containing crucibles," Refractories, Vol. 28[5], pp. 242-247 (1987).
125. Chester, J. H., "Steelplant refractories," The united state companies Ltd. (1963) pp. 582-582.
126. Cooper, C. F., "The carbon mono oxide attack on graphite containing refractories," Interceram, Special Issue, pp. 97-100 (1983).
127. Sugita, K. and Shinohara, Y., "Refractories technology for blast furnace tapholes and troughs," Interceram, Special Issue, pp. 111-118 (1983).
128. Ruther, P., "Refractory materials in blast furnace plants," www.ceramic-journals.com/english/objeke/cn99_1 (1999).
129. Lee, S. J. and Thornton, A. W., "Continuous casting with graphitised alumina refractories," J. Inst. Refract. Eng, Spring, pp. 8-11 (1991).
130. Ogata, K., Refractories (Tokyo), Vol. 45[11], pp. 638-638 (1993).
131. Andoh, M., Muroi, T. and Ozeki, H., "Alumina graphite nozzles for continuous casting," Refractories (Tokyo], Vol. 47[4], pp. 193-200 (1995).
132. Minami, M., Furusato, I., Fukuoka, H., Kaneko, T. and Iitsuka, S., Refractories (Tokyo), Vol. 46[5], pp. 277-282 (1994).
133. Zhong, X., "Refractories developments for iron and steel making in china," Naihuo Cailiao, Vol. 30[1], pp. 4-9 (1994).
134. Zhang, C., Zhao, C. and Han, Y., "Development and application of high alumina-spinel-carbon unfired nozzle," Naihuo Cailiao, Vol. 31 [1], pp. 36-37 (1997).
135. Rabah, M. A., Interceram, Vol. 38[1], pp. 25-28 (1989).
136. Luhrsen, E., "Carbon-containing non-basic materials," Pocket manual refractory materials, Vulkan-Verlag, Essen/Germany (1997) pp. 80-87.
137. Takeshita, S., Hasegawa, S., Artani, K. and Kawakami, T., Taikabutsu (Refractories), Vol. 39[6], pp. 345-347 (1987).
138. 3-C based refractories to the melts containing titania," China's Refractories, Vol. 11[1], pp. 3-8 (2002).
139. Lee, W. E. and Moore, R. E., J. Am. Ceram. Soc., Vol. 81, pp. 1385-410 (1998).
140. Jakson, B. and Webster, R., "Developments continue in magnesia-carbon refractories for EAF and BOF use," ISI, Vol. 4, pp. 67-78 (1981).
141. Buchebner, A., Lasser, K. and Weitzer, P., "Economical use of magnesia carbon bricks in electric arc furnaces and in after-treatment equipment," Metallurgical Plant and Technology, Vol. 1, pp. 34-37 (1987).
142. Zhang, Y., Naihuo Cailiao, Vol. 30[4], pp. 212-214 (1996).
143. Buhr, A., "Refractories for steel secondary metallurgy., CN Refractories, Vol. 6[3], pp. 19-30 (1999).
144. Vert, T., "A comparison of precast bottom materials/designs at Dofasco Inc. Iron and Steelmaker," Vol. 26[6], pp. 25-31 (1999).
145. Henry, F. J. and Standera, J., "Recent development in spinel forming castable use in steel plants iron and steelmaker," Vol. 26[6], pp. 33-37 (1999).
146. Moore, R., "Shortcreting monolithic steel ladle safety linings at Dofasco Iron and Steelmaker," Vol. 29[4], pp. 21-27 (2002).
147. Blumenfeld, P., Puillet, M., Delorgeril, J. and Verrelle, D., "Effect of service conditions on wear mechanisms of steel ladle refractories," UNITECR'97, New Orleans, Louisina, USA, The American Ceramic Society, 4-7 November (1997) pp. 213-219.
148. Franken, M., Siebring, R. and deWit, T., "New refractory lining for steel ladle bOS' no. 2 Corus Ijmuiden," UNITECR'01, Cancun, Mixico, Asociacion Latinoamericana de Fabricantes de Refractories, 4-7 November (2001) pp. 128-138.
149. Riguad, M., Palco, S. and Zhou, N., "Alumina and magnesia-based castables containing graphite: a comparision," UNITECR'01, Cancun, Mixico, Asociacion Latinoamericana de Fabricantes de Refractories, 4-7 November (2001) pp. 336-349.
150. Figueiredo, A., Bellandi, N., Vanola, N. and Zamboni, L., "Technological evolution of magnesia-carbon bricks for steel ladles in argentina," UNITECR'01, Cancun, Mixico, Asociacion Latinoamericana de Fabricantes de Refractories, 4-7 November (2001) pp. 157-166.
151. Mattila, R., Vatanen, J. and Harkki, J., "Chemical wearing mechanism of refractory materials in a steel ladle slag line," 6th Int. Conf. On molten slags and salts, Stockholm, Sweden and Hhhelsinki, Finland, Department of Material Science and Engineering, KTH, 12-17 June (2000).
152. Jia-quan, L., "Status and developments of refractories for iron-steelmaking in china," Proceedings of International Symposium on Refractories: Refractory raw Materials & High Temperature Performance Refractory Products, August (1988) pp. 321-332.
153. Zuniga, M. and De Novales, J. L., Bol. Soc. Esp. Ceram. Vidrio, Vol. 28[5], pp. 371-378 (1989).
154. Brewster, A. J., Frith, M. and Evans, D. T., Rev. Metall. Cah. Inf. Tech. (France), Vol. 90[3], pp. 369-378 (1993).
155. Dasand, T. and Toledo, O. D., "Development of magnesiaspinel-carbon for ladles of secondary metallurgy," UNITECR'95 Congress. Proc. Unified Int. Tech. Conf. On Refractories 4th Biennial Worldwide Conf. On Refractories. "Global Development of Refractories," Vol. 3. Kyoto, 19-22 November (1995) pp. 278-285.
156. Doty, J. R. and Conrad, J. P., "Ladle bricks that eliminate steel penetration and extend ladle lives," Iron & Steel Society/ AIME (USA), Vol. 54, pp. 389-392 (1996).
157. 3-MgO-C bricks in con casting ladle lining," Naihuo Cailiao, Vol. 30[1], pp. 40-41 (1996).
158. Warner, M., Kingsbury, K., Yoder, P. and Harvey, J., "Improvements in ladle refractory practices at IPSCO-Muscatine," I & SM, Vol. 28[6], pp. 17-21 (2001).
159. Meyer, W., Franshi, A., Buchebner, G. and Willingshofer, M., "The use of dolomite carbon-lined ladles for the production of super clean steel," Veitsch-Radex Rundschau, Vol. 2, pp. 32-44 (1998).
160. Gupta, A. D. and Vikram, K., "Development of resin-bonded alumina-magnersia-carbon bricks for steel ladle applications," Interceram, Vol. 48[5], pp. 307-310 (1999).
161. Miglani, S. and Uchno, J. J., "Resin bonded alumina-magnesia-carbon bricks for ladles," Veitsch-Radex Rundschau, Vol. 2, pp. 3-12 (1998).
162. Filho, G. C., Santos, F. D., Rodrigues, J. A., Varela, J. A. and Longo, E., "Dense layer in MgO-C refractory for ladles," UNITECR'93 Congress. Refractories for the New World Economy. Proc. Conf. Sao Paulo, 31 October (1993) pp. 1585-1594.
163. Poirier, J., Guiban, M. A., Blumenfeld, Ph., Boher, M. and Bourrier, Ph., "Contribution of refractories to the steel quality and cleanliness," Rev. Met. Paris, pp. 1145-1159 (2000).
164. Benson, P. M., Rancoule, G., DeBastiani, D. L., Robinson, Q. K., Stephenson, D., Dumas, P. and Hanse, E., "Method and compositions for making refractory shapes having dense, carbon free surface and shapes made therefrom," US patent No. 5,681,499, 28 October (1997) pp.1-23.
165. Rancoule, G. I., "Zirconia graphite slide gate plates," US patent No. 5, 335, 833, August 9 (1994).
166. Rancoule, G. and DeBastiani, D. L., "Improved magnesia-carbon refractory composition for slide gate plates and method of manufacture, "WO 9321128A1, 28 October (1993) pp. 1-20.
167. Ogata, K. and Iitsuka, S., "Alumina-magnesia-graphite type refractory," WO9938818A1, Aug. 5 (1999).