Coupled hydromechanical modeling of rock fractures under normal stress

Canadian Geotechnical Journal

Volumn 41, Issue 4, 2004, Pages 686-697

  Bart, M ^a   Shao, J F ^a   Lydzba, D ^a,b   Haji Sotoudeh, M ^a  

^a LABORATOIRE DE MÉCANIQUE DE LILLE   (France)

^b WROCLAW UNIVERSITY OF TECHNOLOGY   (Poland)

Author keywords

Fractures; Hydromechanical coupling; Interfaces; Joints; Poroelasticity; Rock mechanics

Indexed keywords

COMPUTER SIMULATION; DATA REDUCTION; FLOW OF FLUIDS; GEOTECHNICAL ENGINEERING; MATHEMATICAL MODELS; PARAMETER ESTIMATION; STRESS ANALYSIS;

FRACTURE DISPLACEMENTS; MODIFICATION PROCESSES; POROMECHANICAL MODEL; ROCK FRACTURES;

ROCK MECHANICS;

FRACTURE MECHANICS; GEOTECHNICAL PROPERTY; HYDROMECHANICS; MODELING; ROCK MECHANICS;

EID: 8744239188     PISSN: 00083674     EISSN: None     Source Type: Journal    
DOI: 10.1139/T04-018     Document Type: Article

References (38)

1. Amadei, B., and Saeb, S. 1990. Constitutive models of rock joints. In Rock Joints: Proceedings of the International Symposium on Rock Joints, Loen, Norway, 4-6 June 1990. Edited by N. Barton and O. Stephansson. A.A. Balkema, Rotterdam, The Netherlands, pp. 587-594.
2. Bandis, S. 1980. Experimental studies of scale effects on shear strength and deformation of rock joints. Ph.D. thesis, Department of Earth Science, University of Leeds, Leeds, UK.
3. Bandis, S., Lumsden, A., and Barton, N. 1983. Fundamentals of rock joint deformation. International Journal of Rock Mechanics and Mining Sciences, 20(6): 249-268.
4. Bart, M. 2000. Contributions to modeling of hydromechanical behavior of rock masses involving fractures. Ph.D. thesis, University of Lille, Lille, France. [In French.]
5. Barton, N., and Bakhtar, K. 1983. Rock joint description and modeling for the hydrothermomechanical design of nuclear waste repositories. Contract Report to Mining Research Laboratories, CANMET, Ottawa, Ont. Parts 1-5.
6. Barton, N., and Choubey, V. 1977. The shear strength of rock joints in theory and practice. Rock Mechanics, 10(1): 1-54.
7. Barton, N., and de Quadros, E.F. 1997. Joint aperture and roughness in the prediction of flow and groutability of rock masses. International Journal of Rock Mechanics and Mining Sciences, 34(3-4): 700-701.
8. Barton, N., Bandis, S., and Bakhtar, K. 1985. Strength deformation and conductivity coupling in rock joint. International Journal of Rock Mechanics and Mining Sciences, 22(3): 121-140.
9. Biot, M.A. 1941. General theory of three dimensional consolidation. Journal of Applied Physics, 12: 155-164.
10. Biot, M.A. 1973. Non-linear and semi-linear rheology of porous solids. Journal of Geophysical Research, 78: 4924-4937.
11. Boulon, M., Armand, G., Hoteit, N., and Divoux, P. 2002. Experimental investigations and modeling of shearing of calcite healed discontinuities of granodiorite under typical stresses. Engineering Geology, 64(2-3): 117-133.
12. Chen, Z., Narayan, S.P., Yang, Z., and Rahman, S.S. 2000. An experimental investigation of hydraulic behaviour of fractures and joints in granitic rock. International Journal of Rock Mechanics and Mining Sciences, 37(7): 1061-1071.
13. Coussy, O. 1995. Mechanics of porous continua. Wiley, New York.
14. Desai, C.S., Drumm, E., and Zaman, M.M. 1985. Cyclic testing and modeling of interfaces. Journal of Geotechnical Engineering, ASCE, 111: 793-815.
15. Esaki, T., Du, S., Mitani, Y., Ikusada, K., and Jing, L. 1999. Development of a shear-flow test apparatus and determination of coupled properties for a single rock joint. International Journal of Rock Mechanics and Mining Sciences, 36(5): 641-650.
16. Gentier, S. 1986. Morphology and hydromechanical behavior of a natural fracture in granite under normal stress. Doctoral thesis, Université d'Orléans, Orléans, France. [In French.]
17. Goodman, R.E. 1976. Methods of geological engineering in discontinuous rock. West Publishing Company, New York.
18. Grasselli, G., Wirth, J., and Egger, P. 2002. Quantitative three-dimensional description of a rough surface and parameter evolution with shearing. International Journal of Rock Mechanics and Mining Sciences, 39(6): 789-800.
19. Haji-Sotoudeh, M. 1995. Experimental study and modeling of hydromechanical coupling in rock joints. Doctoral thesis, University of Lille, Lille, France. [In French.]
20. Haji-Sotoudeh, S.M., Sibai, M., and Henry, J.P. 1995. Experimental study of hydromechanical behavior of rock joint. In Mechanics of Jointed and Faulted Rock: Proceedings of the 2nd International Conference on the Mechanics of Jointed and Faulted Rock (MJFR2), Vienna, Austria, 10-14 April 1995. Edited by H.-P. Rossmanith. A.A. Balkema, Rotterdam, The Netherlands. Vol. 2, pp. 31-36.
21. Indraratna, B., and Ranjith, P.G. 2001. Hydromechanical aspects and unsaturated flow in jointed rock. A.A. Balkema Publishers, Rotterdam, The Netherlands.
22. Kulatilake, P.H.S., He, W., Um, J., and Wang, H. 1997. A physical model study of jointed rock mass strength under uniaxial compressive loading. International Journal of Rock Mechanics and Mining Sciences, 34(3-4): 692-693.
23. Lanru, J. 1990. A two dimensional constitutive model of rock joints with pre-post peak behavior. In Rock Joints: Proceedings of the International Symposium on Rock Joints, Loen, Norway, 4-6 June 1990. Edited by N. Barton and O. Stephansson. A.A. Balkema, Rotterdam, The Netherlands. pp. 633-638.
24. Lee, H.S., Park, Y.J., Cho, T.F., and You, K.H. 2001. Influence of asperity degradation on the mechanical behavior of rough rock joints under cyclic shear loading. International Journal of Rock Mechanics and Mining Sciences, 38(7): 967-980.
25. Ng, K.L.A., and Small, J.C. 1997. Behavior of joints and interfaces subjected to water pressure. Computers and Geotechnics, 20(1): 71-93.
26. Nguyen, T.S., and Selvadurai, A.P.S. 1998. A model for coupled mechanical and hydraulic behavior of a rock joint. International Journal for Numerical and Analytical Methods in Geomechanics, 22: 29-48.
27. Plesha, M.E. 1987. Constitutive models for rock discontinuities with dilatancy and surface degradation. International Journal for Numerical and Analytical Methods in Geomechanics, 11: 345-362.
28. Riss, J., Gentier, S., Sirieix, C., Archambault, G., and Flamand, R. 1996. Degradation characterization of sheared joint wall surface morphology. In Rock Mechanics: Tools and Techniques - Proceedings of the 2nd North American Rock Mechanics Symposium (NARMS'96), Montréal, Que., 19-21 June 1996. Edited by M. Aubertin, F. Hassani, and H. Mitri. A.A. Balkema, Rotterdam, The Netherlands. pp. 1343-1349.
29. Romm, E.S. 1966. Flow characteristics of fractured rocks. Nedra, Moscow. [In Russian.]
30. Seidel, J., and Haberfield, C. 1995. Towards an understanding of joint roughness. Rock Mechanics and Rock Engineering, 28(2): 69-92.
31. Selvadurai, A.P.S., and Nguyen, T.S. 1995. Computational modeling of isothermal consolidation of fractured porous media. Computers and Geotechnics, 17(1): 39-73.
32. Selvadurai, A.P.S., and Nguyen, T.S. 1999. Mechanics and fluid transport in a degradable discontinuity. Engineering Geology, 53(3-4): 243-249.
33. Swoboda, G., Shen, X.P., and Rosas, L. 1998. Damage model for jointed rock mass and its application to tunneling. Computers and Geotechnics, 22(3-4): 183-203.
34. Tsang, Y.W., and Witherspoon, P.A. 1981. Hydromechanical behavior of a deformable rock fracture subject to normal stress. Journal of Geophysical Research, 86(B10): 9287-9298.
35. Tse, R., and Cruden, D.M. 1979. Estimating joint roughness coefficients. International Journal of Rock Mechanics and Mining Sciences, 16: 303-307.
36. Vychytil, J., and Horii, H. 1998. Micromechanics-based continuum model for hydraulic fracturing of jointed rock masses during HDR simulation. Mechanics of Materials, 28(1-4): 123-135.
37. Wei, Z.Q., Egger, P., and Descoeudres, F. 1995. Permeability predictions for jointed rock masses. International Journal of Rock Mechanics and Mining Sciences, 32(3): 251-261.
38. Yang, Z.Y., and Di, C.C. 2001. A directional method for directly calculating the fractal parameters of joint surface roughness. International Journal of Rock Mechanics and Mining Sciences, 38(8): 1201-1210.