On the influence of in-situ reactions on grain size during reactive atomization and deposition

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35 A, Issue 10, 2004, Pages 3251-3263

  Lin, Yaojun ^a   Zhou, Yizhang ^a   Lavernia, Enrique J ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIZATION; DEPOSITION; GRAIN SIZE AND SHAPE; NUCLEATION; REACTION KINETICS; SOLIDIFICATION; TEMPERATURE MEASUREMENT;

IN SITU REACTIONS; REACTIVE ATOMIZATION-AND-DEPOSITION; SPRAY DEPOSITION;

ALUMINUM ALLOYS;

EID: 8644274778     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-0068-x     Document Type: Article

References (57)

1. E.J. Lavernia and Y. Wu: Spray Atomization and Deposition, John Wiley & Sons, Inc., New York, NY, 1996, pp. 278-79.
2. P.S. Grant: Progr. Mater. Sci., 1995, vol. 39, pp. 497-545.
3. S.Y. Chang, J.G. Lee, K.T. Park, and D.H. Shin: Mater. Trans., 2001, vol. 42, pp. 1074-80.
4. H. Imamura and N. Ridley: Proc. JSRS Symp. on Superplasticity in Advanced Materials, S. Hori, M. Tokizane, and N. Furushiro, eds., Japan Society for Research on Superplasticity, Osaka, Japan, 1991, pp. 453-58.
5. F. Li, W.T. Roberts, and P.S. Bate: Scripta Metall. Mater., 1993, vol. 29, pp. 875-80.
6. S.L. Dai, J.-P. Delplanque, and E.J. Lavernia: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2597-2611.
7. H. Liu, R.H. Rangel, and E.J. Lavernia: Acta Metall. Mater., 1994, vol. 42, pp. 3277-89.
8. X. Zeng, H. Liu, M. Chu, and E.J. Lavenia: Metall. Trans. A, 1992, vol. 23A, pp. 3394-99.
9. J.F. Perez and D.G. Morris: Scripta Metall. Mater., 1994, vol. 31, pp. 231-35.
10. Y. Unigame, A. Lawley, and D. Apelian: Proc. 1993 Powder Metallurgy World Congr., Japan Powder Metallurgy Association, Kyoto, Japan, 1993, paper no. 14E-T6-6.
11. X. Zeng, S. Nutt, and E.J. Lavernia: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 817-27.
12. E.J. Lavernia, J.-P. Delplanque, and K.M. McHugh: Spray Rolling Aluminum Strip, a proposal to the United States Department of Energy, 1999, p. 14.
13. Y. Unigame: Master's Thesis, Drexel University, Philadelphia, PA, 1989.
14. R. Ranganathan, A. Lawley, and D. Apelian: Proc. 1993 Powder Metallurgy World Congr., Japan Powder Metallurgy Association, Kyoto, Japan, 1993, paper no. 14E-T6-6.
15. Q. Xu, V.V. Gupta, and E.J. Lavernia: Acta Mater., 2000, vol. 48, pp. 835-49.
16. X. Liang and E.J. Lavernia: Mater. Sci. Eng. A, 1993, vol. 161, pp. 221-35.
17. X. Liang, J.C. Earthman, and E.J. Lavernia: Acta Metall. Mater., 1992, vol. 40, pp. 3003-16.
18. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974, pp. 151-54 and 293.
19. T.J. Carney, P. Tsakiropoulos, J.F. Watts, and J.E. Castle: Int. J. Rapid Solidification, 1990, vol. 5, pp. 189-217.
20. Q. Xu and E.J. Lavernia: Acta Mater., 2001, vol. 49, pp. 3849-61.
21. P.S. Grant, B. Cantor, and L. Katgerman: Acta Metall. Mater., 1993, vol. 41, pp. 3097-108.
22. P.S. Grant and B. Cantor: Acta Metall. Mater., 1995, vol. 43, pp. 913-21.
23. E. Lee and S. Ahn: Acta Metall. Mater., 1994, vol. 42, pp. 3231-43.
24. W. Cai and E.J. Lavernia: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 1085-96.
25. J.H. Perepezko: Mater. Sci. Eng. A, 1994, vol. 178A, pp. 105-11.
26. X. Zhang: Acta Mater., 1998, vol. 46, pp. 1135-41.
27. G.X. Liu: Principles of Metals Science, Metallurgical Industry Press, Beijing, China, 1980, p. 75.
28. D. Turnbull: Thermodynamics in Physical Metallurgy, ASM, Metals Park, OH, 1949, p. 283.
29. K.A. Jackson and B. Chalmers: Can. J. Phys., 1956, vol. 34, pp. 473-90.
30. Y.J. Lin, Y. Zhou, and E.J. Lavernia: Metall. Mater. Trans. B, 2004, in press.
31. W.E. Ranz and W.R. Marshall: Chem. Eng. Progr., 1952, vol. 48, pp. 141-46 and 173-80.
32. Q.Q. Lu, J.R. Fontaine, and G. Aubertin: Int. J. Heat Mass Transfer, 1993, vol. 36, pp. 79-87.
33. G.H. Ganser: Powder Technol., 1993, vol. 77, pp. 143-52.
34. R. Clift, J.R. Grace, and M.E. Weber: Bubbles, Drops and Particles, Academic Press, New York, NY, 1978, p. 111.
35. K. Lubanska: JOM, 1970, vol. 22, pp. 45-49.
36. A. Lawley: Atomization: the Production of Metal Powders, MPIF, Princeton, NJ, 1992, p. 74.
37. E.J. Lavernia, T.S. Srivatsan, and R.H. Rangel: Atomization Sprays, 1992, vol. 2, pp. 253-74.
38. A. Unal: Metall. Trans. B, 1989, vol. 20B, pp. 61-69.
39. P.S. Grant, B. Cantor and L. Katgerman: Acta Metall. Mater., 1993, vol. 41, pp. 3109-18.
40. B.C. Moon, Z.H. Lee, D.R. White, and E.J. Lavernia: J. Mater. Res., 2000, vol. 15, pp. 1669-78.
41. R. Verma, A.K. Ghosh, S. Kim, and C. Kim: Mater. Sci. Eng. A, 1995, vol. 191A, pp. 143-50.
42. K. Kannan, J.S. Vetrano, and C.H. Hamilton: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2947-57.
43. S.L. Dai, J. P. Delplanque, and E.J. Lavernia: Scripta Mater., 1999, vol. 40, pp. 145-51.
44. S.L. Dai, J.-P. Delplanque, and E.J. Lavernia: J. Mater. Res., 1999, vol. 14, pp. 2814-23.
45. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, United Kingdom, 1995, p. 147.
46. S. Annavarapu and R.D. Doherty: Acta Metall. Mater., 1995, vol. 43 pp. 3207-30.
47. Y.W. Kim, W.M. Griffith, and F.H. Froes: JOM, 1985, vol. 37, August, pp. 27-33.
48. J. Szekely and N.J. Themelis: Rate Phenomena in Process Metallurgy, Wiley-Interscience, New York, NY, 1971.
49. D.R. Poirier and G.H. Geiger: Transport Phenomena in Materials Processing, TMS, Warrendale, PA, 1994.
50. R.W. Fox and A.T. McDonald: Introduction to Fluid Mechanics, John Wiley & Sons, Inc., New York, NY, 1992, p. 633.
51. J.E.A. John: Gas Dynamics, Allyn and Bacon, Inc., Boston, MA, 1969, p. 17.
52. Y.J. Lin, Y. Zhou, and E.J. Lavernia: in Powder Materials: Current Research and Industrial Practices, F.D. Marquis, S. Thadhani, and N. Barrera, eds., TMS, Warrendale, PA, 2001, pp. 41-57.
53. Y.J. Lin, Y. Zhou, and E.J. Lavernia: J. Mater. Res., 2004, in press.
54. Y.J. Lin, Y. Zhou, and E.J. Lavernia: 2004, unpublished research.
55. R.M. German: Liquid Phase Sintering, Plenum Press, New York, NY, 1985, p. 158.
56. E.D. Manson-Whitton, I.C. Stone, P.S. Grant, B. Cantor, and S. Blackham: in Solidification 1998, S.P. Marsh, J.A. Dantzig, R. Trivedi, W. Hofmeister, M.G. Chu, E.J. Lavernia, and J.H. Chun, eds., TMS, Warrendale, PA, 1998, pp. 415-25.
57. G.V. Samsonov: Oxide Handbook, translated by C.N. Turton and T.I. Turton, IFI/Plenum Data Corporation, New York, NY, 1973, p. 122.