SIMULATION OF MICRO-PORE FORMATION IN SPRAY DEPOSITION PROCESSES

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

Volumn 1996-AG, Issue , 1996, Pages 275-282

  Delplanque, J P ^a   Lavernia, E J ^a   Rangel, R H ^a  

^a University of California at Irvine   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEPOSITS; DROPS; HEAT TRANSFER; JETS; MULTIPHASE FLOW; PORE SIZE; REYNOLDS NUMBER; SOLIDIFICATION;

DEPOSITION PROCESS; DROPLET SOLIDIFICATION; DROPLET SPREADING; LIQUID-JET; MICROPORES; NAVIER-STOKES EQUATION; PORE FORMATION; POROSITY FORMATION; POSSIBLE MECHANISMS; SPRAY DEPOSITION;

NAVIER STOKES EQUATIONS;

EID: 85169619323     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE1996-1056     Document Type: Conference Paper

References (28)

1. Anderson, D. M., and Davis, S. H., 1994, “Local fluid and heat flow near contact lines,” Journal ofFluid Mechanics, Vol. 268, pp. 231-265.
2. Bennett, T., and Poulikakos, D., 1993, “Splat-quench solidification: estimating the maximum spreading of a droplet impacting a solid surface,” Journal ofMaterials Science, Vol. 28, pp. 963-970.
3. Benz, M., Sawyer, T., Carter, W., Zabala, R., and Dupree, P., 1994, “Nitrogen in spray formed superalloys,” Powder Metallurgy, Vol. 37, pp. 213-218.
4. Bourges, C., and Shanahan, M., 1993, “L'influence de l'evaporation sur l'angle de contact des gouttes d'eau,” C.R. Acad. Sci. Paris, Vol. 316, pp. 311-316, Serie II.
5. Cai, W., Sickinger, A., Muehlberger, E., Bailey, D., and Lavernia, E. J., 1994, 1994 InternationaConference on Tungsten and Refractory Metals, Washington, DC.
6. de Gennes, P. G., Hua, X., and Levinson, P., 1990, “Dynamics of wetting: local contact angles,” Journal ofFluidMechanics, Vol. 212, pp. 55-63.
7. Delplanque, J.-P., Lavernia, E. J., and Rangel, R. H., 1995, “Multi-directional solidification model for the description of micro-pore formation in spray deposition processes,” Numerical Heat Transfer, Part A: Applications, Accepted for publication. Also presented at the 1995 ASME Winter Annual Meeting, November 12-17, San Francisco, California.
8. Delplanque, J.-P., and Rangel, R., 1995, "An improved model for droplet solidification on a flat surface," Journal of I Materials Science, Submitted.
9. Drelich, J., and Miller, J., 1994, “The effect of solid surface heterogeneity and roughness on the contact angle/drop (bubble) size relationship,” Journal of Colloid and Interface Science, Vol. 164, pp. 252-259.
10. Fukai, J., Zhao, Z., Poulikakos, D., Megaridis, C. M., and Miyatake, O., 1993, “Modeling of the deformation of a liquid droplet impinging on a flat surface,” Physics ofFluids, Vol. 5, No. 11, pp. 2588-2599.
11. Hocking, L., 1992, “Rival contact-angle models and the spreading of drops,” Journal ofFluid Mechanics, Vol. 239, pp. 671-681.
12. Inada, S., and Yang, W.-J., 1994, “Solidification of molten metal droplets impinging on a cold surface,” Experimental Heat Transfer, Vol. 7, pp. 93-100.
13. Kothe, D. B., and Mjolsness, R. C., 1992, “RIPPLE - a new model for incompressible flows with free surfaces.,” AIAA Journal, Vol. 30, No. 11, pp. 2694-2700.
14. Lavernia, E., and Wu, Y., 1995, Spray Atomization and Deposition, John Wiley & Sons, In Press.
15. Lavernia, E. J., 1989, “The evolution of microstructure during spray atomization and deposition,” InternationalJournal ofRapidSolidification, Vol. 5, No. 1, pp. 47-85.
16. Liu, H., Lavernia, E. J., and Rangel, R. H., 1993, “Numerical simulation of substrate impact and freezing of droplets in plasma spray processes,” J. Phys. D: Appl. Phys., Vol. 26, pp. 1900-1908.
17. Liu, H., Lavernia, E. J., and Rangel, R. H., 1994, “Numerical investigation of micro-pore formation during substrate impact of molten droplets in plasma spray processes,” Atomization and Sprays, Vol. 4, pp. 369-384.
18. Liu, H., Lavernia, E. J., and Rangel, R. H., 1995, “Modeling of molten droplet impingement on a non-flat surface,” Acta Metallurgica et Materialia, Vol. 43, No. 5, pp. 2053-2072.
19. Orme, M., 1993, “A novel technique of rapid solidification net-form materials synthesis,” Journal ofMaterials Engineering and Performance, Vol. 2, No. 3, pp. 399-405.
20. Passow, C, H., Chun, J.-H., and Ando, T., 1993, “Spray deposition of a Sn-40 wt. pet. Pb alloy with uniform droplets,” Metallurgical TransactionsA-Physical MetallurgyandMaterials Science, Vol. 24A, pp. 1187-1193.
21. Popov, V., 1992, “Effect of real wetting conditions on the hysteresis of the contact angle of drops,” Teplofizika Vysokikh Temperatur, Vol. 30, pp. 915-923.
22. Poulikakos, D., and Waldvogel, J., 1995, “Transport phenomena relevant to the impact regime of the process of spray deposition; a review,”, presented at the 24th National Heat Transfer Conference, Heat Transfer division of the ASME Portland, Ore.
23. Rangel, R., and Bian, X., 1996, “A metal-droplet deformation and solidification model with substrate remelting,”, Submitted for presentation at the 1996 ASME IMECE, Second International Symposium on Multiphase Flows and Heat Transfer in Materials Processing, Atlanta, Georgia.
24. Rein, M., 1993, “Phenomena of liquid drop impac on solid and liquid surface,” Fluid Dynamics Research, Vol. 12, pp. 61-93.
25. Sampath, S., and Herman, H., 1993, “Plasma spray forming metals, intermetallics, and composites,” JOM: The Journal of the Minerals, Metals & Materials Society, Vol. 45, No. 7, pp. 42-49.
26. Sobolev, V., and Guilemany, J., 1994, “Investigation of coating porosity formation during high-velocity oxy-fuel (HVOF) spraying,” Materials Letters, Vol. 18, pp. 304-308.
27. Trapaga, G., Matthys, E. F., Valencia, J. J., and Szekely, J., 1992, “Fluid flow, heat transfer, and solidification of molten metal droplets impinging on substrates - comparison of numerical and experimental results,” Metallurgical Transactions B-Process Metallurgy, Vol. 23B, pp. 701-718.
28. Zhang, J., Gungor, M. N„ and Lavernia, E. J., 1993, “The effect of porosity on the microstructural damping response of 6061 aluminum alloy,” Journal ofMaterials Science, Vol. 28, No. 6, pp. 1515-1524.