TRANSPORT PHENOMENA IN THE IMPACT OF A MOLTEN DROPLET ON A SURFACE: MACROSCOPIC PHENOMENOLOGY AND MICROSCOPIC CONSIDERATIONS PART I: FLUID DYNAMICS

Annual Review of Heat Transfer

Volumn 11, Issue , 2000, Pages 65-143

  Haferl, S ^a   Attinger, D ^a   Zhao, Z ^a   Giannakouros, J ^a   Poulikakos, D ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

DROP BREAKUP; HEAT TRANSFER; INCOMPRESSIBLE FLOW; LIQUID METALS; MASS TRANSFER; NEWTONIAN LIQUIDS; PHASE INTERFACES; SURFACE TENSION; THERMAL GRADIENTS; TRANSPORT PROPERTIES; WETTING;

FLUID-DYNAMICS; FREE LIQUID SURFACE; GASEOUS ENVIRONMENTS; IMPACT PROBLEM; LIQUID DROPLETS; MOLTEN DROPLETS; SOLID SURFACE; THERMOCAPILLARITY; TRANSFER MODES; TRANSPORT PHENOMENON;

SOLIDIFICATION;

EID: 85162899922     PISSN: 10490787     EISSN: 23750294     Source Type: Book Series    
DOI: 10.1615/AnnualRevHeatTransfer.v11.40     Document Type: Chapter

References (178)

1. A. M. Worthington, On the Forms Assumed by Drops of Liquids Falling Vertically on a Horizontal Plate, Prot: Roy. Sot: London, Vol. 25, pp. 261-271, 1877.
2. A. M. Worthington, A Second Paper on the Forms Assumed by Drops of Liquids Falling Vertically on a Horizontal Plate, Prot: Roy. Sot: London, Vol. 25, pp. 498-503, 1877.
3. R. L. Panton, Incompressible Flow, Wiley, New York, 1984.
4. L. D. Landau and E. M. Lifshitz, FluidMechanics: Course ofTheoreticalPhysics, 1 st ed., Vol. 6, pp. 230-235, Pergamon, Oxford, 1959.
5. J. U. Brackbill, D. B. Kothe, and C. Zemach, A Continuum Method for Modeling Surface Tension, J. Compt. Phys., Vol. 100, pp. 335-354, 1992.
6. H. Lass, Vector and Tensor Analysis, 1st ed., pp. 70-80, McGraw-Hill, New York, 1950.
7. C. D. Stow and M. G. Hadfield, An Experimental Investigation of Fluid Flow Resulting from the Impact of a Water Drop with an Unyielding Dry Surface, Proc. Roy. Sot: London A, Vol. 373, pp. 419-441, 1981.
8. J. Bernardin, C. J. Stcbbins, and I. Mudawar, Mapping of Impact and Heat Transfer Regimes of Water Drops Impinging on a Polished Surface, Int. J. Heat Mass Transfer, Vol. 40, pp. 247-267, 1997.
9. F. J. Hymann, High-Speed Impact between a Liquid Drop and a Solid Surface, J. Appi Phys., Vol. 40, pp. 5113-5122, 1969.
10. M. B. Lesser, Analytic Solutions of Liquid-Drop Impact Problems, Proc. Roy. Soc. London A, Vol. 377, pp. 289-308, 1981.
11. J. Fukai, Z. Zhao, D. Poulikakos, C. M. Megaridis, and O. Miyatake, Modeling of the Deformation of a Liquid Droplet Impinging upon a Flat Surface, Phys. Fluids A, Vol. 5, pp. 2588-2599, 1993.
12. S. Schiaffino and A. A. Sonin, Motion and Arrest of a Molten Contact Line on a Cold Surface: An Experimental Study, Phys. Fluids, Vol. 9, pp. 2217-2226, 1997.
13. X. Zhang and O. A. Basaran, Dynamic Surface Tension Effects in Impact of a Drop with a Solid Surface, J. Coll. Inter. Sci, Vol. 187, pp. 166-178, 1997.
14. C. Mundo, M. Sommerfeld, and C. Tropea, Droplet-Wall Collisions: Experimental Studies of the Deformation and Breakup Process, Int. J. Multiphase Flow, Vol. 21, pp. 151-173, 1995.
15. J. Madejski, Solidification of Droplets on a Cold Surface, Int. .1. Heat Mass Transfer, Vol. 19, pp. 1009-1013, 1976.
16. O. G. Engel, Waterdrop Collisions with Solid Surfaces, J. Res. Nat. Rur. Stand., Vol. 54, pp. 281-298, 1955.
17. S. Schiaffino and A. A. Sonin, On the Theory for the Arrest of an Advancing Molten Contact Line on a Cold Solid of the Same Material, Phys. Fluids, Vol. 9, pp. 2227-2233, 1997.
18. D. Poulikakos and J. Waldvogel, Heat Transfer and Fluid Dynamics in the Process of Spray Deposition, Adv. Heat Transfer, Vol. 28, pp. 1-74, 1996.
19. T. Bennett and D. Poulikakos, Splat-Quench Solidification: Estimating the Maximum Spreading of a Droplet Impacting a Solid Surface, /. Mat. Sci., Vol. 28, pp. 963-970, 1993.
20. E. W. Collings, A. J. Markworth, J. K. McCoy, and J. H. Saunders, Splat-Quench Solidification of Freely Falling Liquid-Metal Drops by Impact on a Planar Substrate, J. Mat. Sci., Vol. 25, pp. 3677-3682, 1990.
21. S. Chandra and C. T. Avedisian, On the Collision of a Droplet with a Solid Surface, Proc. Roy. Soc. London A, Vol. 432, pp. 13-41, 1991.
22. M. Pasandideh-Fard, Y. M. Qiao, S. Chandra, and J. Mostaghimi, Capillary Effects during Droplet Impact on a Solid Surface, Phys. Fluids, Vol. 8, pp. 650-659, 1996.
23. F. H. Harlow and J. P. Shannon, The Splash of a Liquid Drop, J. Appi. Phys., Vol. 38, pp. 3855-3866, 1967.
24. M. Bertagnolli, M. Marchese, G. Jacucci, I. S. Doltsinis, and S. Noelting, Thermomechanical Simulation of the Splashing of Ceramic Droplets on a Rigid Substrate, /. Comp. Phys., Vol. 133, pp. 205-221, 1997.
25. G. Trapaga and J. Szekeley, Mathematical Modeling of the Isothermal Impingement of Liquid Droplets in Spraying Processes, Metal. Trans. B, Vol. 22, pp. 901-914, 1991.
26. J. Fukai, Y. Shiba, T. Yamamoto, O. Miyatake, D. Poulikakos, C. M. Megaridis, and Z. Zhao, Wetting Effects on the Spreading of a Liquid Droplet Colliding with a Flat Surface: Experiment and Modeling, Phys. Fluids, Vol. 7, pp. 236-247, 1995.
27. Z. Zhao, D. Poulikakos, and J. Fukai, Heat Transfer and Fluid Dynamics during the Collision of a Liquid Droplet on a Substrate: I-Modeling, Int. J. Heat Mass Transfer, Vol. 39, pp. 2771-2789, 1996.
28. J. M. Waldvogel, D. Poulikakos, D. B. Wallace, and R. Marusak, Transport Phenomena in Picoliter Size Solder Droplet Dispension on Composite Substrate, J. Heat Transfer, Vol. 118, pp. 148-156, 1996.
29. J. M. Waldvogel and D. Poulikakos, Solidification Phenomena in Picoliter Size Droplet Deposition on a Composite Substrate, Int. J. HeatMass Transfer, Vol. 40, pp. 295-309, 1997.
30. B. Xiong, C. M. Megaridis, D. Poulikakos, and H. Hoang, An Investigation of Key Factors Affecting Solder Microdroplet Deposition, J. Heat Transfer, Vol. 120, pp. 259-270, 1998.
31. J. M. Waldvogel, G. Diversiev, D. Poulikakos, C. M. Megaridis, D. Attinger, B. Xiong, and D. B. Wallace, Impact and Solidification of Molten-Metal Droplets on Electronic Substrates, J, Heat Transfer, Vol. 120, p. 539, 1998.
32. K. Tsurutani, M. Yao, J. Senda, and H. Fujimoto, Numerical Analysis of the Deformation Process of a Droplet Impinging upon a Wall, JSMEInt. J Ser. 11, Vol. 33, pp. 555-561, 1990.
33. T. Watanabe, I. Kuribayashi, T. Honda, and A. Kanzawa, Deformation and Solidification of a Droplet on a Cold Substrate, Chem. Eng. Sci., Vol. 47, pp. 3059-3065, 1992.
34. H. Liu, E. J. Lavernia, and R. H. Rangel, Numerical Simulation of Substrate Impact and Freezing of Droplets in Plasma Spray Processes, J. Phys. D: Appi. Phys., Vol. 26, pp. 1900-1908, 1993.
35. H. Liu, E. J. Lavernia, and R. H. Rangel, Numerical Investigation of Micropore Formation during Substrate Impact of Molten Droplets in Plasma Spray Processes, Atomiz/ition and Sprays, Vol. 4, pp. 369-384, 1994.
36. J.-P. Delplanque, E. J. Lavernia, and R. H. Rangel, Multi-directional Solidification Model for the Description of Micro-pore Formation in Spray Deposition Processes, J. Num. Heat Transfer A, Vol. 30, pp. 1-18, 1996.
37. A. Y. Tong and B. R. Holt, A Numerical Study on the Solidification of Liquid Metal Droplet Impacting onto a Substrate, J. Num. Heat Transfer A, Vol. 31, pp. 797-817, 1997.
38. M. Pasandideh-Fard and J. Mostaghimi, Deformation and Solidification of a Molten Particle on a Substrate in Thermal Plasma Spraying, in Prot: 7th Nat. Thermal Spray Conf. Boston, 1994, pp. 405-414.
39. G. Trapaga, E. F. Matthys, J. J. Valencia, and J. Szekely, Fluid Flow, Heat Transfer and Solidification of Molten Metal Droplets Impinging on Substrates: Comparison of Numerical and Experimental Results, Metall. Trans. B, Vol. 23, pp. 70-718, 1992.
40. N. Hatta, H. Fujimoto, and H. Takuda, Deformation Process of a Water Droplet Impinging on a Solid Surface, Trans. ASME J. Fluids Eng., Vol. 117, pp. 394-401, 1995.
41. M. Bertagnolli, M. Marchese, and G. Jacucci, Modeling of Particles Impacting on a Rigid Substrate under Plasma Spraying Conditions, J. Therm. Spray Tech., Vol. 4, pp. 41-49, 1995.
42. S. E. Bechtel, D. B. Bogy, and F. E. Talke, Impact of a Liquid Drop against a Flat Substrate, IBM J. Res. Develop., Vol. 25, pp. 963-971, 1981.
43. Y. C. Huang, F. G. Hammit, and W.-J. Yang, Hydrodynamie Phenomena during High-speed Collision between Liquid Droplet and Rigid Plane, Trans. ASME./. Fluids Eng., Vol., pp. 276-294, 1973.
44. S. C. Marchi, H. Liu, A. Sickinger, E. Muhlenberg, E. J. Lavernia, and R. H. Rangel, Numerical Analysis of the Deformation and Solidification of a Single Droplet Impinging onto a Flat Substrate, J. Mat. Sci, Vol. 28, pp. 3313-3321, 1993.
45. M. Denesuk, J. P. Cronin, B. J. J. Zelinski, N. J. Kreidl, and D. R. Uhlmann, Predictive Modeling of Liquids Spreading on Solid Surfaces, Physics and Chemistry of Glasses, Vol. 34, pp. 203-211, 1993.
46. R. H. Rangel and X. Bian, Metal-Droplet Deposition Model Including Liquid Deformation and Substrate Remelting, Int. J. Heat Mass Transfer, Vol. 40, pp. 2549-2564, 1997.
47. A. Karl, M. Ricbcr, M. SchcJklc, K, Anders, and A. Frohn, Comparison of New Numerical Results for Droplet Wall Interactions with Experimental Results, ASME 1996 Fluids Engineering Division Conf, Vol. 236, pp. 201-206, J 996.
48. X. Shan and H. Chen, Simulation of Non-ideal Gases and Liquid-Gas Phase Transitions by the Lattice Boltzmann Equation, Phys. Rev. E, Vol. 49, pp. 2941-2948, 1994.
49. S. Toda, A Study of Mist Cooling, Heat Transfer Japanese Res., Vol, 3, pp. 1 -44, 1974.
50. S. Inada, Y. Miyasaka, K. Nishida, and G. R. Chandratilleke, Transient Temperature Variation of a Hot Wall due to an Impinging Water Drop—Effect of Subcooling of the Water Drop, Prot: ASME-JSME Therm. Eng. Joint Conf, Vol. I, pp. 173-182, 1983.
51. P. Savie and G. T. Boult, The Fluid Flow Associated with the Impact of Liquid Drops with Solid Surfaces, Nat. Res. Council Canada, Rep. no. MT-26, 1955.
52. T. Ueda, T. Enomoto, and M. Kanetsuki, Heat Transfer Characteristics and Dynamic Behavior of Saturated Droplets Impinging on a Heated Vertical Surface, Bull. JAME, Vol. 22, pp. 724-732, 1979.
53. C. O. Pedersen, An Experimental Study of the Dynamic Behavior and Heat Transfer Characteristics of Water Droplets Impinging upon a Heated Surface, Int. J. Heat Mass Transfer, Vol. 13, pp. 369-381, 1970.
54. L. H. Wächters and N. A. J. Westerling, The Heat Transfer from a Hot Wall to Impinging Water Drops in the Spherical State, Cltem. Eng. Sci., Vol. 21, pp. 1047—1056, 1966.
55. A. L. Yarin and D. A. Weiss, Impact of Drops on Solid Surfaces: Self-similar Capillary Waves, and Splashing as a New Type of Kinematic Discontinuity, J. Fluid Mech., Vol. 283, pp. 141-173, 1995.
56. Z. Zhao, D. Poulikakos, and J. Fukai, Heat Transfer and Fluid Dynamics during the Collision of a Liquid Droplet on a Substrate: I I. Experiments, int. J. Heat Mass Transfer, Vol. 39, pp. 2791-2802, 1996.
57. M. H. Shi and J. C. Chen, Behaviour of a Liquid Droplet Impinging on a Solid Surface, ASME, Vol. 83-WA/HT-I04, 1983.
58. H. Huppert, Flow and Instability of a Viscous Current Down a Slope, Nature, Vol. 300, pp. 427-429, 1982.
59. L. W. Schwartz, Viscous Flows Down an Inclined Plane: Instability and Finger Formation, Phys. Fluids A, Vol. 1, pp. 443-445, 1989.
60. F. Melo, J. F. Joanny, and F. Fauve, Fingering Instabilities of Spinning Drops, Phys. Rev. Lett., Vol. 63, pp. 1958-1961, 1989.
61. R. Goodwin and G. M. Homsy, Viscous Flow Down a Slope in the Vicinity of a Contact Line, Phys. Fluids A, Vol. 3, pp. 515-528, 1991.
62. S. M. Troian, E. Herbolzheimer, S. A. Safran, and J. F. Joanny, Fingering Instabilities of Driven Spreading Films, Europhys. Lett., Vol. 10, pp. 25-30, 1989.
63. J. B. Brzoska, F. Brochard-Wyart, and F. Rondelez, Exponential Growth of Fingering Instabilities of Spreading Films under Horizontal Thermal Gradients, Europhys. Lett., Vol. 19, pp. 97-102, 1992.
64. J. M. Jerrett and J. R. deBruyn, Fingering Instability of a Gravitationally Driven Contact Line, Phys. Fluids, Vol. 4, pp. 234-242, 1992.
65. M. A. Spaid and G. M. Homsy, Stability of Viscoelastic Dynamic Contact Lines: An Experimental Study, Phys. Fluids, Vol. 9, pp. 823-832, 1997.
66. A. L. Bertozzi and M. P. Brenner, Linear Stability and Transient Growth in Driven Contact Lines, Phys. Fluids, Vol. 9, pp. 530-539, 1997.
67. M. Rein, The Transitional Regime between Coalescing and Splashing Drops, in S. Morioka and L. v. Wijngaarden (ed.), ¡UTAM Symp. on Waves in Liquid/Gas and Liquid/Vapor Two Phase Systems, pp. 145-165, Kluwer Academic, Norwell, MA, 1996.
68. M. Rein, Phenomena of Liquid Drop Impact on Solid and Liquid Surfaces, Fluid Dyn. Res., Vol. 12, pp. 61-93, 1993.
69. M. Rein, Wave Phenomena during Droplet Impact, in S. Morioka and L. v. Wijngaarden (ed.), IUTAM Symp. on Waves in Liquid/Gas and LiquiciïVapor Two Phase Systems, pp. 171-191, Kluwer Academic, Norwell, MA, 1995.
70. S. P. Lin, Stabilizing Effects of Surface-Active Agents on a Film-Flow, AIChE J., Vol. 16, pp. 375-379, 1970.
71. P. E. Schunk and L. E. Seri ven. Surfactant Effects in Coating Processes, in S. E. Kistler and P. M. Schweizer (ed.), Liquid Film Coating, 1st ed., Chapman and Hall, London, 1997.
72. T. Stoebe, Z. Lin, R. M. Hill, M. D. Ward, and H. T. Davis, Surfaclanl-Enhanced Spreading, Langmuir, Vol. 12, pp. 337-344, 1996.
73. L. Leger and J. F. Joanny, Liquid Spreading, Rep. Prog. Phys., Vol. 55, pp. 431 -486, 1992.
74. P. G. deGennes, Wetting: Statics and Dynamics, Rev. Mod. Phys., Vol. 57, pp. 827-863, 1985.
75. A. W. Adamson and A. Gast (ed.), Physical Chemistry of Surfaces, 6th ed., Wiley, New York, 1997.
76. P. Sheng and M. Zhou, Immiscible Fluid Displacement: Contact-Line Dynamics and the Velocity-Dependent Capillary Pressure, Phys. Rev., Vol. 45, pp. 5694-5708, 1992.
77. E. B. Dussan V, On the Spreading of Liquids on Solid Surfaces: Static and Dynamic Contact Lines, Ann. Rev. Fluid Meek, Vol. 11, pp. 371-400, 1979.
78. A. M. Cazabat, How Does a Droplet Spread? Contemp. Phys., Vol. 28, pp. 347-364, 1987.
79. S. Chandra and C. T. Avedisian, Observations of Droplet Impingement on a Ceramic Porous Surface, Int. J. Heat Mass Transfer, Vol. 35, pp. 2377-2388, 1992.
80. H. Liu, E. J. Lavernia, and R. H. Range), Modeling of Molten Droplet Impingement on a Non-flat Surface, 1994 Int. Mech. Eng. Cong, and Exposition, Chicago, 1994.
81. P. J. Haley and M. J. Miksis, The Effect of the Contact Line on Droplet Spreading, J. Fluid Mech., Vol. 223, pp. 57-81, 1991.
82. L. M. Hocking and A. D. Rivers, The Spreading of a Drop by Capillary Action, J. Fluid Mech., Vol. 121, pp. 425-442, 1982.
83. C. Huh and S. G. Mason, The Steady Movement of a Liquid Meniscus in a Capillary Tube, J. Fluid Mech., Vol. 81, pp. 401-419, 1977.
84. Z. Levin and P. V. Hobbs, Splashing of Water Drops on Solid and Wetted Surfaces: Hydrodynamics and Charge Separations, Phil. Trans. R. Soc. London A, Vol. 269, pp. 555-585, 1971.
85. C. K. Mutchter and C. L. Larson, Splash Amounts from Waterdrop Impact on a Smooth Surface, Water Resour. Res., Vol. 7, pp. 195-200, 1971.
86. C. D. Stow and R. D. Stainer, The Physical Products of a Splashing Water Drop, J. Meteorol. Soc. Jap., Vol. 55, pp. 518-531, 1977.
87. M. Orme, C. Huang, and J. Courier, Deposition Strategies for Control ofMicrostructures Microporosily and Surface Roughness in Droplet-Based Solid Freeform Fabrication of Structural Materials, in E. F. Matthys and W. G. Truckner (eds.), Melt Spinning, Strip Casting and Slab Casting, pp. 125-143, The Minerals, Metals and Materials Society, Warrendale, PA, 1996.
88. M. Rosenblatt, Y. M. Ito, and L. DeAngelo, in 5th Int. Conf. on Erosion by Liquidand Solid Impact (Cambridge, U.K., 1979), pp. 4.1-4.10.
89. J. P. Dear and J. E. Field, High-Speed Photography of Surface Geometry Effects in Liquid/Solid Impact, J. Appi. Phys., Vol. 63, pp. 1015-1021, 1988.
90. O. A. Povarov, K. K. Shal'nev, O. I. Nazarov, and I. A. Shalobasov, Collision of Droplets with a Moving Plane Surface, Sow Phys. Dokl., Vol. 20, pp. 782-783, 1976.
91. I. P. Faddeyev, S. L. Khaviya, and B. Y. Mosenzhnik, Oblique Impingement of a Spherical Liquid Droplet on a Solid Wall, Fluid Meek-Soviet Res., Vol. 17, pp. 38-44, 1988.
92. R. J. Hand, J. E. Field, and D. Townsend, The Use of Liquid Jets to Simulate Angled Drop Impact, J. Appi. Phys., Vol. 70, pp. 7111-7118, 1991.
93. V. Sobolev and J. M. Guileinany, Effect of Droplet Impact Angle on Flattening of Splat in Thermal Spraying, Materials Lett., Vol. 32, pp. 197-201, 1997.
94. V. Sobolev, J. M. Guilemany, J. Nutting, and J. R. Miguel, Development of Substrate-Coating Adhesion in Thermal Spraying, Int. Materials Rev., Vol. 42, pp. 117-136, 1997.
95. V. Sobolev and J. M. Guilemany, Influence of Drop Impact Angle on Droplet-Substrate Mechanical Interaction in Thermal Spraying, Mat. Lett., Vol. 33, pp. 315-319, 1998.
96. V. Sobolev and J. M. Guilemany, Droplet-Substrate Impact Interaction in Thermal Spraying, Mat. Lett., Vol. 28, pp. 331-335, 1996.
97. S. T. Thoroddsen and J. Sakakibara, Evolution of the Fingering Pattern of an Impacting Drop, Phys. Fluids, Vol. 10, pp. 1359-1374, 1998.
98. M. Schelke, M. Rieber, and A. Frohn, Comparison of Lattice Boltzmann and Navier-Stokes Simulations of Three-Dimensional Free-Surface Flows, 1996 Fluids Eng. Div. Conf., Vol. 1, pp. 207-212, ASME, 1996.
99. M. Pasandideh-Fard, R. Bhola, S. Chandra, and J. Mostaghimi, Deposition of Tin Droplets on a Steel Plate: Simulations and Experiments, Int. J. Heat Mass Transfer, Vol. 41, pp. 2929-2945, 1998.
100. J. Che, S. Ceccio, and G. Tryggvason, in Pmc. 1998 ASME Fluids Eng. Div. Summer Meeting (Washington DC, 1998), pp. 1-6.
101. S. Fantassi, M. Vardelle, A. Vardelle, and P. Fauchais, Influence of the Velocity of Plasma-Sprayed Particles on Splat Formation, J. Therm. Spray Tech., Vol. 2, pp. 379-384, 1993.
102. F. J. Heymann, High-Speed Impact between a Liquid Drop and a Solid Surface, J. Appi. Phys., Vol. 40, pp. 5113-5122, 1969.
103. F. P. Bowden and J. H. Brunton, The Deformation of Solids by Liquid Impact at Supersonic Speeds, Proc. Roy. Soc. London A, Vol. 263, pp. 433-450, 1961.
104. J. E. Field, M. B. Lesser, and J. P. Dear, Studies of Two-dimensional Liquid-Wedge Impact and Their Relevance to Liquid-Drop Impact Problems, Proc. Roy. Soc. London A, Vol. 401, pp. 225-249, 1985.
105. F. P. Bowden and J. E. Field, The Brittle Fracture of Solids by Liquid Impact, by Solid Impact and by Shock., Proc. Roy. Soc. London A, Vol. 282, pp. 331-352, 1964.
106. S. P. Marsh, LASL Shock Hugoniot Data, Vol., U.C. Press 1980.
107. W. F. Adler, Waterdrop Impact Modeling, Wear, Vol. 186-187, pp. 341-351, 1995.
108. J.-P. Delplanque and R. H. Rangel, An Improved Model for Droplet Solidification on a Flat Surface, J. Mat. Sci., Vol. 32, pp. 1519-1530, 1997.
109. R. G. Perel'man, Effect of Gas Medium on the Dimensions of the Contact Area in High-Speed Droplet Impact on a Target, Fluid Mech.-Soviet Res., Vol. 4, pp. 108-113, 1988.
110. A. L. Gonor and V. Y. Yakovlev, Impact of a Drop on a Solid Surface, Mekh. Zh. Gaza, Vol. 5, pp. 151-155, 1977.
111. V. V. Poddubenko and R. M. Yablonik, Impact of a Droplet on a Solid Surface, Fluid Mech.-Soviet Res., Vol. 19, pp. 111-116, 1990.
112. S. K. Godunov and G. P. Prokopov, The Use of Moving Meshes in Gas-Dynamical Computations, Zh. Vychisl. Mat. Mat. Fit., Vol. 12, pp. 429-440, 1972.
113. N. Apazidis and M. B. Lesser, On Generation and Convergence of Polygonal-Shaped Shock Waves, J. Fluid Mech., Vol. 309, pp. 301-319, 1996.
114. G. H. Miller and E. G. Puckett, A High-Order Godunov Method for Multiple Condensed Phases, J. Comp. Phys., Vol. 128, pp. 134-164, 1996.
115. F. J. Heymann, On the Shock-Wave Velocity and Impact Pressure in High-Speed Liquid-Solid Impact, J. Basic Eng., Trans. ASME, pp. 400-402, 1968.
116. C. Huh and L. E. Scriven, Hydrodynamic Model of Steady Movement of a Solid/ Liquid/Fluid Contact Line, J. Coll. Inter. Sci, Vol. 35, pp. 85-101, 1971.
117. E. B. Dussan V. and S. H. Davis, On the Motion of a Fluid-Fluid Interface along a Solid Surface, J. Fluid Mech., Vol. 65, pp. 71-95, 1974.
118. S. F. Kistler, Hydrodynamics of Wetting, in J. C. Berg (ed.), Wettability, 1st ed., Dekker, New York, 1993.
119. J. Drelich, The Effect of Drop (Bubble) Size on Contact Angle at Solid Surfaces, J. Adhesion, Vol. 63, pp. 31-51, 1997.
120. R. L. Hoffmann, A Study of the Advancing Interface: I. Interface Shape in Liquid-Gas Systems, J. Coll. Inter. Sci., Vol. 50, pp. 228-241, 1975.
121. L. H. Tanner, The Spreading of Silicone Oil Drops on Horizontal Surfaces, J. Phys. D: Appi. Phys, Vol. 12, pp. 1473-1484, 1979.
122. O. V. Voinov, Hydrodynamics of Wetting, Fluid Dynamics, Vol. 11, pp. 714-721, 1976.
123. J. M. Waldvogel, Transport Phenomena and Solidification in Picoliter Solder Droplet Deposition, Ph.D. Thesis, University of Illinois at Chicago, Chicago, 1995.
124. J. D. Chen, Experiments on a Spreading Drop and Its Contact Angle on a Solid,./. Coll. Inter. Sci., Vol. 122, pp. 60-72, 1988.
125. D. Ausserré, A. M. Picard, and L. Léger, Existence and Role of the Precursor Film in the Spreading of Polymer Liquids, Phys. Rev. Lett., Vol. 57, pp. 2671-2674, 1986.
126. S. Schiaffino and A. A. Sonin, Molten Droplet Deposition and Solidification at Low Weber Numbers, Phys. Fluids, Vol. 9, pp. 3172-3187, 1997.
127. D. M. Anderson and S. H. Davis, Local Fluid and Heat Flow Near Contact Lines, J. Fluid Meek, Vol. 268, pp. 231-265, 1994.
128. G. B. Foote, The Water Drop Rebound Problem: Dynamics of Collision, J. Atmos. Sci, Vol. 32, p. 390, 1975.
129. J. C. Berg (ed.), Wettability, 1st ed., Dekker, New York, 1993.
130. S. E. Kistler and P. M. Schweizer (ed.), Liquid Film Coating, 1st ed., Chapman and Hall, London, 1997.
131. J. Koplik, J. R. Banavar, and J. F. Willemsen, Molecular Dynamics of Fluid Flow at Solid Surfaces, Phys. Fluids A, Vol. 1, pp. 781-794, 1989.
132. J. Koplik, J. R. Banavar, and J. F. Willemsen, Molecular Dynamics of Poiseuille Flow and Moving Contact Lines, Phys. Rev. Lett., Vol. 60, pp. 1282-1285, 1988.
133. P. A. Thompson and M. O. Robbins, Simulations of Contact-Line Motion: Slip and the Dynamic Contact Angle, Phys. Rev. Lett., Vol. 63, pp. 766-769, 1989.
134. P. A. Thompson and S. M. Troian, A General Boundary Condition for Liquid Flow at Solid Surfaces, Nature, Vol. 389, pp. 360-362, 1997.
135. C. L. M. H. Navier, Mémoire sur les lois du mouvement des fluides, Mém. Acad. R. Sei. Inst. Fr., Vol. 6, pp. 389-440, 1827.
136. S. H. Davis, Contact Line Problems in Fluid Mechanics, J. Appi. Mech., Vol. 50, pp. 977-982, 1983.
137. H. P. Greenspan, On the Motion of a Small Viscous Droplet That Wets a Surface, J. Fluid Mech., Vol. 84, pp. 125-143, 1978.
138. E. B. Dussan V., The Moving Contact Line: The Slip Boundary Condition, J. Fluid Mech., Vol. 77, pp. 665-684, 1976.
139. P. A. Durbin, Considerations on the Moving Contact-Line Singularity, with Application to Frictional Drag on a Slender Drop, J. Fluid Mech., Vol. 197, pp. 157-169, 1988.
140. P. Bach and O. Hassager, An Algorithm for the Use of the Lagrangian Specification in Newtonian Fluid Mechanics and Applications to Free-Surface Flow, J. Fluid Mech., Vol. 152, pp. 173-190, 1985.
141. T. D. Blake, Dynamic Contact Angles and Wetting Kinetics, in J. C. Berg (ed.), Wettability, Ist ed., Dekker, New York, 1993.
142. P. Neogi and C. A. Miller, Spreading Kinetics of a Drop on a Smooth Solid Surface, J. Coll. Inter. Sci., Vol. 86, pp. 525-538, 1982.
143. E. Ruckenstein and C. S. Dunn, Slip Velocity during Wetting of Solids, /. Coll. Inter. Sci. Vol. 59, pp. 135-138, 1977.
144. T. D. Blake and J. M. Haynes, Kinetics of Liquid/Liquid Displacement, J. Coll. Inter. Sci., Vol. 30, pp. 421-423, 1969.
145. B. W. Cherry and C. M. Holmes, Kinetics of Wetting of Surfaces by Polymers, J. Colt. Inter. Sci, Vol. 29, pp. 174-176, 1969.
146. L. M. Hocking, A Moving Fluid Interface on a Rough Surface, J. Fluid Mech., Vol. 76, pp. 801-817, 1976.
147. G. F. Teletzke, H. T. Davis, and L. E. Scriven, Wetting Hydrodynamics, Rev. Phys. Appi, Vol. 23, pp. 989-1007, 1988.
148. K. M. Jansons, Moving Contact-Lines at Non-zero Capillary Numbers, J. Fluid Mech., Vol. 167, pp. 393-407, 1986.
149. P. Neogi and C. A. Miller, Spreading Kinetics of a Drop on a Rough Solid Surface, J. Coll. Inter. Sci, Vol. 92, pp. 338-349, 1983.
150. R. J. Hansen and T. Y. Toong, Dynamic Contact Angle and Its Relationship to Forces of Hydrodynamic Origin, J. Coll. Inter. Sci., Vol. 37, pp. 196-207, 1971.
151. N. Tilton, Viscocapillary Slip Flows with Special Application to Microdisplacement in Porous Media, Ph.D. Thesis, University of Houston, Houston, 1985.
152. R. G. Cox, The Dynamics of the Spreading of Liquids on a Solid Surface. I. Viscous Flows, / Fluid Mech., Vol. 168, pp. 169-194, 1986.
153. T. D. Blake and K. J. Ruschak, Wetting: Static and Dynamic Contact Lines, in S. E. Kistler and P. M. Schweizer (eds.), Liquid Film Coating, 1st ed., Chapman and Hall, London, 1997.
154. P. C. Wayner, Spreading of a Liquid Film with a Finite Contact Angle by the Evaporation/Condensation Process, Langmuir, Vol. 9, pp. 294-299, 1993.
155. P. G. deGennes, X. Hua, and P. Levinson, Dynamics of Wetting, Local Contact Angles, J. Fluid Mech., Vol. 212, pp. 55-63, 1990.
156. H. J. Eyring, S. Glasstone, and K. J. Laidler, The Theory ofRate Processes, 1st ed., McGraw-Hill, New York, 1941.
157. G. Yarnold and B. Mason, A Theory of the Angle of Contact, Proc. Phys. Soc. London, Vol. 62, pp. 121-125, 1949.
158. T. D. Blake and K. J. Ruschak, A Maximum Speed of Wetting, Nature, Vol. 282, pp. 489-491, 1979.
159. E. B. Dussan V, E. Rame, and S. Garoff, On Identifying the Appropriate Boundary Condition at a Moving Contact Line, J. Fluid Mech., Vol. 230, pp. 97-116, 1991.
160. F. Brochard-Wyart and P. G. deGennes, Dynamics of Partial Wetting, Adv. Coll. Inter. Sci., Vol. 39, pp. 1-11, 1992.
161. B. T. Atwood and W. R. Schowalter, Measurements of Slip at the Wall during Flow of High-Density Polyethylene through a Rectangular Conduit, Rheol. Acta, Vol. 28, pp. 134-146, 1989.
162. J. Yang, J. Koplik, and J. R. Banavar, Terraced Spreading of Simple Liquids on Solid Surfaces, Phys. Rev. A, Vol. 46, pp. 7738-7749, 1992.
163. W. D. Bascom, R. L. Cottington, and C. R. Singleterry, Dynamic Surface Phenomena in the Spontaneous Spreading of Oils on Solids, in R. F. Gould (ed.), Contact Angle, Wettability and Adhesion, American Chemical Society, 1964.
164. A. M. Cazabat, N. Fraysse, and F. Heslot, Molecular Wetting Films, Progr. Coll. Polym. Sci., Vol. 83, pp. 52-55, 1990.
165. A. M. Cazabat, N. Fraysse, and F. Heslot, Thin Wetting Films, Colloids and Surfaces, Vol. 52, pp. 1-8, 1991.
166. F. Heslot, A. M. Cazabat, N. Fraysse, and P. Levinson, Experiments on Spreading Droplets and Thin Films, Adv. Coll. Inter. Sci, Vol. 39, pp. 129-145, 1992.
167. N. Fraysse, M. P. Valignat, A. M. Cazabat, F. Heslot, and P. Levinson, The Spreading of Layered Microdroplets, J. Coll. Inter. Sci, Vol. 158, pp. 27-32, 1993.
168. J. Hu, R. W. Carpick, M. Salmerón, and X. Xiao, Imaging and Manipulation of Nanometer-Size Liquid Droplets by Scanning Polarization Force Microscopy, 7. Vac. Sci. Technol. B, Vol. 14, pp. 1341-1343, 1995.
169. T. Pompe, A. Fery, and S. Herminghaus, Imaging Liquid Structures on Inhomogenous Surfaces by Scanning Force Microscopy, Langmuir, Vol. 14, pp. 2585-2588, 1998.
170. S. Haferl, D. Poulikakos, and Z. Zhao, Employing Scanning Force Microscopy to Investigate the Free Surface of Liquid Microstructures and their Wetting Behavior on Smooth Surfaces: Gathered Experiences, to be published.
171. L. Cheng, Dynamic Spreading of Drops Impacting onto a Solid Surface, Ind. Eng. Chem., Vol. 16, pp. 192-197, 1977.
172. K. Araki and A. Moriyama, Theory on Deformation Behavior of a Liquid Droplet Impinging onto a Hot Metal Surface, Trans. ISIJ, Vol. 21, pp. 583-590, 1981.
173. L. Bolle and J. C. Moureau, Spray Cooling of Hot Surfaces, Multiphase Sci. Technol., Vol. 1, pp. 1-97, 1982.
174. Y. M. Qiao and S. Chandra, Boiling of Droplets on a Hot Surface in Low Gravity, Int. J. Heat Mass Transfer, Vol. 39, pp. 1379-1393, 1996.
175. D. Attinger, Z. Zhao, and D. Poulikakos. Analytical Estimation of the Maximum Spreading Diameter during Impact of a Drop on a Colder Surface Including Thermocapillary and Gravitational Effects, ILASS 1999 Confi, Spray Impact on Wall and Films, pp. 1-6. Toulouse 5-7 July 1999.
176. J. E. Field, J. P. Dear, and J. E. Ogren, The Effects of Target Compliance on Liquid Drop Impact, J. Appi. Phys., Vol. 62, pp. 533-540, 1988.
177. R. Burley and B. S. Kennedy, A Study of the Dynamic Wetting Behaviour of Polyester Tapes, Brit. Polym. J., Vol. 8, pp. 140-143, 1976.
178. R. Burley and B. S. Kennedy, An Experimental Study of Air Entrainment at a Solid/ Liquid/Gas Interface, Chem. Eng. Sci., Vol. 31, pp. 901-911, 1976.