STEP-NC in Support of Machining Process Optimization

Springer Series in Advanced Manufacturing

Volumn , Issue , 2009, Pages 169-196

  Xu, Liangji ^a  

^a BOEING COMPANY   (United States)

Author keywords

Chip Thickness; Machine Process; Material Removal Rate; Radial Depth; Tool Path

Indexed keywords

EID: 85151494355     PISSN: 18605168     EISSN: 21961735     Source Type: Book Series    
DOI: 10.1007/978-1-84882-739-4_8     Document Type: Chapter

References (42)

1. [8.1] Merchant, M. E. 1944. Basic Mechanics of the Metal Cutting Process, Journal of Applied Mechanics, Vol. 11, pp. 168-175.
2. Merchant, M. E. 1945. Mechanics of the Metal Cutting Process, I. Orthogonal Cutting and Type 2 Chip, Journal of Applied Physics, Vol. 16, pp. 267-275.
3. Shaw, M. C.; Cook, N. H.; Finnie, I. 1953. The Shear-Angle Relationship in Metal Cutting, Transaction of ASME, Vol. 75, pp 273-288.
4. Oxley, P. 1962. Shear Angle Solution in Orthogonal Machining, International Journal of Machine Tool Design and Research, Vol. 2, pp 219-229.
5. Rowe, G. W. and Spick, P. T. 1967. A New Approach to Determination of the Shear-Plane Angle in Machining, Journal of Engineering for Industry; August, pp 530-538.
6. Martellotti, M. E. 1941. An Analysis of the Milling Process, Transactions of the ASME, Vol. 63, pp. 677-700.
7. Koenigsberger F. and Sabberwal A. J. P. 1961. An Investigation into the Cutting Force Pulsations during Milling Operations, International Journal of Machine Tool Design and Research, Vol. 1, pp 15-33.
8. Kline, W. A., DeVor, R. E. and Lindberg, J. R. 1982. The Prediction of Cutting Forces in End Milling with Application to Cornering Cuts, Dynamics of High Speed Milling, International Journal of Machine Tool Design and Research, Vol. 22, pp 7-22.
9. Bayoumi, A. E., Yucesan, G. and Kendall, L. A. 1994. An Analytic Mechanistic Cutting Force Model for Milling Operations: A Theory and Methodology, Journal of Engineering for Industry, Vol. 116, pp 324-330.
10. Feng, H. Y. and Menq, C. H. 1994. The Prediction of Cutting Forces in the Ball End Milling Process, I. Model Formulation and Model Building Procedure, International Journal of Machine Tools and Manufacture, Vol. 34, pp 697-710.
11. Feng, H. Y. and Menq, C. H. 1994. The Prediction of Cutting Forces in the Ball End Milling Process, II. Cut Geometry Analysis and Model Verification, International Journal of Machine Tools and Manufacture, Vol. 34, pp 711-719.
12. Merritt, H. E. 1965. Theory of Self-Excited Machine-Tool Chatter, Journal of Engineering for Industry, November, pp 447-454.
13. Das, M. K. and Tobias, S. A. 1967. The Relation between the Static and the Dynamic Cutting of Metals, International Journal of Machine Tool Design and Research, Vol. 7, pp 63-89.
14. Andrew, C. and Tobias, S. A. 1962. Vibration in Horizontal Milling, International Journal of Machine Tool Design and Research, Vol. 2, pp 369-378.
15. Tlusty, J. and MacNeil, P. 1975. Dynamic of Cutting Forces in End Milling, Annals of the CIRP, Vol. 24, pp 21-25.
16. Tlusty, J. 1986. Dynamics of High Speed Milling, Journal of Engineering for Industry, Vol. 108, pp 59-67.
17. Smith, S. and Tlusty, J. 1991. An Overview of Modeling and Simulation of the Milling Process, Journal of Engineering for Industry, Vol. 113, pp 169-175.
18. Smith, S. and Tlusty, J. 1993. Efficient Simulation Programs for Chatter in Milling, Annals of the CIRP, Vol. 42/1, pp 463-466.
19. Altintas, Y. and Budak, E. 1995. Analytical Prediction of Stability Lobes in Milling, Annals of the CIRP, Vol. 44/1, pp 357-362.
20. Altintas, Y. and Lee P. 1996. A General Mechanics and Dynamics Model for Helical End Mills, Annals of the CIRP, Vol. 45/1, pp 59-64.
21. Altintas, Y. and Weck, M. 2004. Chatter Stability of Metal Cutting and Grinding, Annals of the CIRP, Vol. 53/2, pp 619-642.
22. Zhu, R., Kappor, S.G. and DeVor, R. E. 2001. Mechanistic Modeling of the Ball End Milling Process for Multi-Axis Machining of Free-Form Surfaces, Journal of Manufacturing Science and Engineering, Vol. 123, pp 369-379.
23. Fussell, B. K., Jerard, R. B. and Hemmett, J. G. 2003. Modeling of cutting Geometry and Forces for 5-axis Sculptured Surface Machining, Computer-Aided Design, Vol. 35, pp 333-346.
24. Ferry, W. B. and Altintas, Y. 2008. Virtual Five-Axis Flank Milling of Jet Engine Impellers – Part I: Mechanics of Five-Axis Flank Milling, Journal of Manufacturing Science and Engineering, Vol. 130, pp 011005-1-11.
25. Ferry, W. B. and Altintas, Y. 2008. Virtual Five-Axis Flank Milling of Jet Engine Impellers – Part II: Feed Rate Optimization of Five-Axis Flank Milling, Journal of Manufacturing Science and Engineering, Vol. 130, pp 011013-1-13.
26. Altintas, Y. and Spence, A. 1991. End Milling Force Algorithms for CAD Systems, Annals of the CIRP, Vol. 40/1, pp 31-34.
27. Spence, A. and Altintas, Y. 1994. A Solid Modeller Based Milling Process Simulation and Planning System, Journal of Engineering for Industry, Vol. 116, pp 61-69.
28. Yazar, Z., Koch, K., Merrick, T. and Altan T. 1994. Feed Rate Optimization based on Cutting Force Calculations in 3-Axis Milling of Dies and Molds with Sculptured Surfaces, International Journal of Machine Tools and Manufacture, Vol. 34, pp 365-377.
29. Fussell, B. K., Jerard, R. B. and Hemmet, J. G. 2001. Robust Feedrate Selection for 3-Axis NC Machining Using Discrete Models, Journal of Manufacturing Science and Engineering, Vol. 123, pp 214-224.
30. Tounsi, N. and Elbestawi, M. A. 2003. Optimized Feed Scheduling in Three Axes Machining. Part I: Fundamentals of the Optimized Feed Scheduling Strategy, International Journal of Machine Tools and Manufacture, Vol. 43, pp 253-267.
31. Tounsi, N. and Elbestawi, M. A. 2003. Optimized Feed Scheduling in Three Axes Machining. Part II: Experimental Validation, International Journal of Machine Tools and Manufacture, Vol. 43, pp 269-282.
32. Guzel, B. U. and Lazoglu, I. 2004. Increasing Productivity in Sculpture Surface Machining via Off-line Piecewise Variable Feedrate Scheduling based the Force System Model, International Journal of Machine Tools and Manufacture, Vol. 44, pp 21-28.
33. Budak, E., Lazoglu, I. and Guzel, B. U. 2004. Improving Cycle Time in Sculptured Surface Machining Through Force Modeling, Annals of the CIRP, Vol. 53/1, pp 103-106.
34. Erdim, H, Lazoglu, I. and Ozturk B. 2006. Feedrate Scheduling Strategies for Free-form Surfaces, International Journal of Machine Tools and Manufacture, Vol. 46, pp 747-757.
35. Altintas Y. and Merdol, S. D. 2007. Virtual High Performance Milling, Annals of the CIRP, Vol. 56/1, pp 81-84.
36. Merdol, S. D. and Altintas Y. 2008. Virtual Simulation and Optimization of Milling Operations – Part I: Process Simulation, Journal of Manufacturing Science and Engineering, Vol. 130, pp 051004-1-12.
37. Merdol, S. D. and Altintas Y. 2008. Virtual Simulation and Optimization of Milling Operations – Part II: Optimization and Feedrate Scheduling, Journal of Manufacturing Science and Engineering, Vol. 130, pp 051005-1-10.
38. El Mounayri, H. Spence, A. D. and Elbestawi, M. A. 1998. Milling Process Simulation – A Generic Solid Moduller Based Paradigm, Journal of Manufacturing Science and Engineering, Vol. 120, pp 213-221.
39. [8.39] Roth, D., Gary, P., Ismail, F. and Bedi, S. 2007. Mechanistic Modelling of 5-axis Milling Using an Adaptive and Local Depth Buffer, Computer-Aided Design, Vol. 39, pp 302-312.
40. Shaw, M. C. 1984. Metal Cutting Principles, Oxford Science Publications.
41. Smith, S. and Tlusty, J. 1990. Update on High-Speed Milling Dynamics, Journal of Engineering for Industry, Vol. 112, pp 142-149.
42. Budak, E. and Tekali, A. 2005. Maximizing Chatter Free Material Removal Rate in Milling through Optimal Selection of Axial and Radial Depth of Cut Pairs, Annals of the CIRP, Vol. 54/1, pp 353-356.