Practical Ship Hydrodynamics, Second Edition

Practical Ship Hydrodynamics, Second Edition

Volumn , Issue , 2011, Pages 1-382

  Bertram, Volker ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85144390090     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2010-0-68326-X     Document Type: Book

References (172)

1. I. Abbott and A. Doenhoff (1959) A theory of wing sections. Dover Publ.
2. C. Abt and S. Harries (2007) A new approach to integration of CAD and CFD for naval architects. 6th Conf. Computer and IT Applications in the Maritime Industries (COMPIT) Cortona
3. R.G. Allan (2004) Tugs and towboats. Ship Design & Construction, SNAME
4. J. Allison (1993) Marine waterjet propulsion. Trans. SNAME 101 275-335.
5. B. Alte and M. Baur (1986) Propulsion. Handbuch der Werften, XVIII Hansa, p. 132
6. P. Andersen, J. Friesch and J. Kappel (2002) Development and full-scale evaluation of a new marine propeller type. Jahrbuch Schiffbautechnische Gesellschaft Springer 465-476.
7. ANEp II-I (1983) Standardized wave and wind environments for NATO operational areas. Allied Naval Engineering Publication
8. I. Asmussen, W. Menzel and H. Mumm (1998) Schiffsschwingungen. Handbuch der Werften XXIV 75-147. Hansa-Verlag
9. D. Bailey (1976) The NPL high-speed round bilge displacement hull series. Maritime Technology Monograph, 4 RINA
10. V. Bertram (1992) Wellenwiderstandsberechnung für SWATH-Schiffe und Katamarane. Jahrbuch Schiffbautechnische Gesellschaft Springer 343-351.
11. V. Bertram (1998) Marching towards the numerical ship model basin. Euromech Conf. 374 3-17. Poitiers
12. Bertram, V. (1998). Numerical investigation of steady flow effects in three-dimensional seakeeping computations. 22nd Symp. Naval Hydrodynamics, Wasshington.
13. Bertram, V. (1999). Panel methods for wave resistance computations. 31 Wegemt school ‘CFD for ship and offshore design’, WEGEMT, London.
14. Bertram, V. & Bentin, M. (2001). Tugs. 36th WEGEMT Summer School "Manoeuvring and Manoeuvring Devices", WEGEMT, London.
15. V. Bertram and P. Couser (2010) Aspects of selecting the appropriate CAD and CFD software. 9th Conf. Computer and IT Applications in the Maritime Industries (COMPIT) Gubbio
16. Bertram, V. & Jensen, G. (1994). Recent applications of computational fluid dynamics. Ship Technology Research, 41/3, 131–134.
17. Bertram, V. & Mesbahi, E. (2004). Estimating resistance and power of fast monohulls employing artificial neural nets, 4th Int. Conf. High-Performance Marine Vehicles (HIPER), Rome.
18. V. Bertram and G. Thiart (1998) A Kutta condition for ship seakeeping computations with a Rankine panel method. Ship Technology Research 45 54-63.
19. V. Bertram and H. Yasukawa (1996) Rankine source methods for seakeeping problems. Jahrbuch Schiffbautechnische Gesellschaft Springer 411-425.
20. A. Biran (2003) Ship Hydrostatics and Stability. Oxford: Butterworth-Heinemann
21. J. Blaurock (1990) An appraisal of unconventional aftbody configurations and propulsion devices. Marine Technology 27/6 325.
22. W. Blendermann (1993) Parameter identification of wind loads on ships. Journal of Wind Engineering and Industrial Aerodynamics 51 339-351.
23. W. Blendermann (1996) Wind loading of ships – Collected data from wind tunnel tests in uniform flow. IfS Report Univ. Hamburg 574
24. W. Blendermann (1998) Parameters of the long-term wind conditions above the oceans. Ship Technology Research 45 99-104.
25. D.L. Blount and E.P. Clement (1963) Resistance tests of a systematic series of planing hull forms. Trans. SNAME 71 491.
26. P. Blume (1979) Experimentelle Bestimmung von Koeffizienten der wirksamen Rolldämpfung und ihre Anwendung zur Abschätzung extremer Rollwinkel. Schiffstechnik 26 3-19.
27. H.J. Bohlmann (1989) Vorausberechnung des Bewegungsverhaltens von Ubooten. Jahrbuch Schiffbautechnische Gesellschaft Springer
28. H.J. Bohlmann (1990) Berechnung hydrodynamischer Koeffizienten von Ubooten zur Vorhersage des Bewegungsverhaltens. IfS Report. 513 Univ. Hamburg
29. J.P. Breslin and P. Andersen (1994) Hydrodynamics of Ship Propellers. Cambridge University Press
30. J. Brix (Ed.) (1993) Manoeuvring Technical Manual Seehafen-Verlag
31. J. Brix, A. Nolte and S. Heinzel (1971) Konstruktive Maßnahmen zur Verhinderung der Kavitation an der Rudersohle. Hansa 16 1579-1587.
32. Buhaug, Ø., Corbett, J. J., Endresen, Ø., Eyring, V., Faber, J., Hanayama, S., Lee, D. S., Lee, D., Lindstad, H., Markowska, A. Z., Mjelde, A., Nelissen, D., Nilsen, J., Pålsson, C., Winebrake, J. J., Wu, W. Q., & Yoshida, K. (2009). Second IMO GHG study 2009. Int. Maritime Organization (IMO), London.
33. Y. Cao, W. Schultz and R.F. Beck (1991) Three-dimensional desingularized boundary integral methods for potential problems. Int. J. Num. Methods in Fluids 12 785-803.
34. J. Carlton (2007) Marine Propellers and Propulsion. Oxford: Butterworth-Heinemann
35. F. Celik (2007) A numerical study for effectiveness of a wake equalizing duct. Ocean Engineering 34 2138-2145.
36. B.C. Chang and P. Blume (1998) Survivability of damaged roro passenger vessels. Ship Technology Research 45 105-117.
37. R.B. Chapman (1975) Free-surface effects for yawed surface piercing plates. J. Ship Research 20 125-132.
38. S.L. Chuang (1967) Experiments on slamming of wedge-shaped bodies. J. Ship Research 11 190-198.
39. T.J. Chung (1978) Finite element analysis in fluid dynamics. McGraw-Hill
40. D. Clarke, P. Gedling and G. Hine (1983) The application of manoeuvring criteria in hull design using linear theory. The Naval Architect 45-68.
41. E.C.M. Danckwardt (1969) Ermittlung des Widerstandes von Frachtschiffen und Hecktrawlern beim Entwurf. Schiffbauforschung 8 124-160.
42. G. Donath and L. Bryndum (1988) Schwingungen auf Schiffen im Zusammenhang mit der Antriebsanlage. Handbuch der Werften XIX 126-200. Hansa-Verlag
43. J. Doyle and S. Loh (1997) Wave propagation in structures: Spectral analysis using fast discrete Fourier transforms. Springer
44. O. Faltinsen (1993) Sea loads on ships and offshore structures. Cambridge University Press
45. O. Faltinsen (2005) Hydrodynamics of high-speed marine vehicles. Cambridge University Press
46. J.H. Ferziger and M. Peric (1996) Computational methods in fluid dynamics. 2nd ed. Springer
47. Foeth, E. J. (2008). Decreasing frictional resistance by air lubrication. 20th Int. Hiswa Symp. Yacht Design and Yacht Construction, Amsterdam.
48. W. Fricke (2002) Festigkeitsanalysen der Schiffskonstruktion mit der Methode der finiten Elemente. Handbuch der Werften XXVI 13-44. Hansa-Verlag
49. Fritsch, M. & Bertram, V. (2002). Power prediction and hull improvement for conventional fast vessels, 3rd Int. Conf. High-Performance Marine Vehicles (HIPER), Bergen, pp. 167–177.
50. M. Gertler (1954) A reanalysis of the original test data for the Taylor standard series. DTMB report 806. Bethesda: David Taylor Model Basin
51. P.S. Granville (1956) The viscous resistance of surface vessels and the skin friction of flat plates. Trans. Society of Naval Architects and Marine Engineers 64 209-240.
52. O. Grim (1980) Propeller and vane wheel. J. Ship Research 24/4 203-226.
53. H. Grothues-Spork (1988) Bilge vortex control devices and their benefits for propulsion. Int. Shipb. Progr. 35 183-214.
54. H.E. Guldhammer and S.A. Harvald (1974) Ship resistance, effect of form and principal dimensions. Akademisk Forlag Copenhagen
55. J.B. Hadler (1966) The prediction of power performance of planing craft. Trans. SNAME 74 563-610.
56. Hansen, H. & Freund, M. (2010). Assistance tools for operational fuel efficiency. 9th Conf. Computer and IT Applications in the Maritime Industries (COMPIT), Gubbio.
57. Harries, S. & Tillig, F. (2011). Numerical hull series. 10th Conf. Computer and IT Applications in the Maritime Industries (COMPIT), Berlin.
58. Harries, S. & Vesting, F. (2010). Aerodynamic optimization of superstructures and components. 9th Conf. Computer and IT Applications in the Maritime Industries (COMPIT), Gubbio.
59. G. Helm (1980) Systematische Propulsions-Untersuchungen von Kleinschiffen. Hamburg: Forschungszentrum des Deutschen Schiffbaus Rep. 100
60. W. Henschke (1965) Schiffbautechnisches Handbuch. 2nd ed. Verlag Technik
61. J.L. Hess (1986) Review of the source panel technique for flow computation. Innovative Numerical Methods in Engineering Springer 197-210.
62. J.L. Hess (1990) Panel methods in computational fluid dynamics. Annual Rev. Fluid Mech. 22 255-274.
63. J.L. Hess and A.M.O. Smith (1964) Calculation of nonlifting potential flow about arbitrary three-dimensional bodies. J. Ship Research 8 22-44.
64. K. Holden, O. Fagerjord and R. Frostad (1980) Early design stage approach to reducing hull surface forces due to propeller cavitation. Trans. SNAME 88 403-442.
65. U. Hollenbach (1998) Estimating resistance and propulsion for single-screw and twin-screw ships. Ship Technology Research 45 72-76.
66. Hollenbach, U. (1999). Estimating resistance and propulsion for single-screw and twin-screw ships in the preliminary design. 10th ICCAS Conf., Cambridge.
67. Hollenbach, U. & Friesch, J. (2007). Efficient hull forms – What can be gained, 1st Int. Conf. on Ship Efficiency, Hamburg.
68. J. Holtrop (1977) A statistical analysis of performance test results. Int. Shipb. Progr. 24 23-28.
69. J. Holtrop (1978) Statistical data for the extrapolation of model performance. Int. Shipb. Progr 25 122-126.
70. J. Holtrop (1984) A statistical re-analysis of resistance and propulsion data. Int. Shipbuilding Progress 31 272-276.
71. J. Holtrop and G.G. Mennen (1978) A statistical power prediction method. Int. Shipbuilding Progress 25 253-256.
72. J. Holtrop and G.G. Mennen (1982) An approximate power prediction method. Int. Shipbuilding Progress 29 166-170.
73. T. Hoshino, A. Oshima, K. Fujita, T. Kuroiwa, F. Hayashi and E. Yamazaki (2004) Development of high-performance stator fin by using advanced panel method. MHI Technical Review 41/6 1-4.
74. Hughes, M. & Bertram, V. (1995). A higher-order panel method for 3-d free surface flows. IfS Report 558, Univ. Hamburg.
75. S. Inoue and K. Kijima (1978) The hydrodynamic derivatives on ship manoeuvrability in the trimmed condition. ITTC Vol. 2 87-92.
76. W.H. Isay (1964) Propellertheorie – Hydrodynamische Probleme. Springer
77. W.H. Isay (1989) Kavitation. Hansa-Verlag
78. ISO (1997) Mechanical vibration and shock – Evaluation of human exposure to whole-body vibration ISO 2631
79. ISO (2000) Mechanical vibration. Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships BS ISO 6954
80. ISO (1996) Mechanical vibration of non-reciprocating machines – Measurements on rotating shafts and evaluation criteria ISO 7919
81. ISO (1996) Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts ISO 10816
82. ISSC (1994). Int. Ship and Offshore Structures Congress, In: N. E. Jeffery, A. M. Kendrick (Eds.), St. John's.
83. ITTC (1990) Report of the powering performance committee. 19th Int. Towing Tank Conf. Madrid
84. ITTC (1999) The specialist committee on unconventional propulsors. 22nd Int. Towing Tank Conf. Seoul
85. C.E. Janson (1996) Potential flow panel methods for the calculation of free surface flows with lift. Chalmers University of Technology PhD Thesis
86. G. Jensen (1994) Moderne Schiffslinien. Handbuch der Werften XXII Hansa
87. Jensen, G. (1988). Berechnung der stationären Potentialströmung um ein Schiff unter Berücksichtigung der nichtlinearen Randbedingung an der freien Wasseroberfläche. IfS Report 484, Univ. Hamburg.
88. M. Kashiwagi (1997) Numerical seakeeping calculations based on slender ship theory. Ship Technology Research 44 167-192.
89. W.H. Keller (1973) Extended diagrams for determining the resistance and required power for single-screw ships. Int. Shipbuilding Progress 20 133-142.
90. J.E. Kerwin (1986) Marine propellers. Ann. Rev. Fluid Mech. 18 387-403.
91. J.E. Kerwin, S.A. Kinnas, J.T. Lee and W.Z. Shih (1987) A surface panel method for the hydrodynamic analysis of ducted propellers. Trans. SNAME 95 93-122.
92. S.A. Kinnas (1996) Theory and numerical methods for the hydrodynamic analysis of marine propulsors. Advances in Marine Hydrodynamics 279-322. Comp. Mech. Publ
93. A. Korobkin (1996) Water impact problems in ship hydrodynamics. Advances in Marine Hydrodynamics pp. 323–371, Comp. Mech. Publ
94. K. Kose (1982) On the new mathematical model of manoeuvring motions of a ship and applications. Int. Shipb. Progr. 29 205-220.
95. A. Kracht (1987) Kavitation an Rudern. Jahrbuch Schiffbautechnische Gesellschaft Springer 167-179.
96. C. Kruppa (1994) Wasserstrahlantriebe. Handbuch der Werften XXII 111-136. Hansa-Verlag
97. H. Lackenby (1963) The effect of shallow water on ship speed. Shipbuilder and Marine Engineer 70 446-450.
98. T. Lamb (1969) A ship design procedure. Marine Technology 6(4),
99. A.J.W. Lap (1954) Diagrams for determining the resistance of single screw ships. Int. Shipb. Progr. 179.
100. L. Larsson (1997) CFD in ship design – Prospects and limitations. Ship Technology Research 44 133-154.
101. L. Larsson and E. Baba (1996) Ship resistance and flow computations. M. Ohkusu (Ed.) Advances in marine hydrodynamics Comp. Mech. Publ 1-75.
102. L. Larsson, B. Regnström, L. Broberg, D.Q. Li and C.E. Janson (1998) Failures, fantasies, and feats in the theoretical/numerical prediction of ship performance. 22. Symp. Naval Shiphydrodyn. Washington
103. B.E. Launder and D.B. Spalding (1974) The numerical computation of turbulent flows. Computer Methods in Applied Mechanics and Engineering 3
104. E. Lehmann (2000) Grundzüge des Schiffbaus Bd 1. Natural-Verlag, TU Hamburg-Harburg
105. H. Lerbs (1952) Moderately loaded propellers with a finite number of blades and an arbitrary distribution of circulation. Trans. SNAME 60 73-123.
106. H. Lerbs (1955) Ergebnisse der angewandten Theorie des Schiffspropellers. Jahrbuch Schiffbautechnische Gesellschaft Springer 163-206.
107. Lewis, E.V. (Ed.) (1990). Principles of Naval Architecture. Soc. Naval Arch. Marine Eng.
108. F.M. Lewis (1929) The inertia of the water surrounding a vibrating ship. Trans. SNAME 37 1-20.
109. D.M. MacPherson (1993) Reliable performance prediction: techniques using a personal computer. Marine Technology 30/4 243-257.
110. W. Menzel, O. El Moctar and H. Mumm (2008) Advanced thinking on tricky excitations. The Naval Architect, March 64-69.
111. F. Mewis (2001) Pod drives – pros and cons. Hansa 138/8 25-30.
112. F. Mewis (2009) A novel power-saving device for full-form vessels. 1st Int. Symp. Marine Propulsors (SMP’09) Trondheim
113. S. Mizoguchi and K. Tanizawa (1996) Impact wave loads due to slamming – A review. Ship Technology Research 43 139-154.
114. W.B. Morgan and W.C. Lin (1998) Predicting ship hydrodynamic performance in today's world. Naval Engineers J. 91-98. September
115. L. Morino (1975) Steady and oscillatory subsonic and supersonic aerodynamics around complex configurations. AIAA J. 13/3 368-374.
116. L. Morino and C.C. Kuo (1974) Subsonic potential aerodynamics for complex configurations: A general theory. AIAA J. 12/2 191-197.
117. T. Munk (2006) Fuel conservation through managing hull resistance. Copenhagen: Motorship Propulsion Conf
118. T. Munk and D. Kane (2009) The effects of corrosion and fouling on the performance of ocean-going vessels: A naval architect perspective. Advances in Marine Antifouling Coatings and Technologies. CRC Press
119. D. Nakos (1990) Ship wave patterns and motions by a three-dimensional Rankine panel method. MIT Ph.D. thesis
120. D. Nakos and P. Sclavounos (1990) Steady and unsteady wave patterns. J. Fluid Mechanics 215 256-288.
121. J.N. Newman (1965) The exciting forces on a moving body in waves. J. Ship Research 10 190-199.
122. J.N. Newman (1977) Marine hydrodynamics. MIT Press
123. J.N. Newman (1978) The theory of ship motions. Adv. Appl. Mech. 18 222-283.
124. J.P. Ok (2005) Numerical investigation of scale effects of a wake-equalizing duct. Ship Technology Research 52 34-53.
125. G. Oortmerssen G.van (1971) A power prediction method and its application to small ships. Int. Shipbuilding Progress 18 397-415.
126. Östergaard, C. (1996). Schiffspropulsion. In: Technikgeschichte des industriellen Schiffbaus in Deutschland, Vol. 2, Ed. L.U. Scholl. Ernst Kabel Verlag, p. 65.
127. M.G. Parsons (2004) Parametric design. Ship Design & Construction, SNAME
128. R. Pereira (1988) Simulation nichtlinearer Seegangslasten. Schiffstechnik 35 173-193.
129. G. Perez Gomez and J. Gonzalez-Adalid (1997) Detailed Design of Ship Propellers. Madrid: FEIN
130. Peric, M. & Bertram, V. (2011). Trends in industry applications of CFD to maritime flows. 10th Conf. Computer and IT Applications in the Maritime Industries (COMPIT), Berlin.
131. R. Peyret and T.D. Taylor (1985) Computational methods for fluid flow. Springer
132. H. Raven (1996) A solution method for the nonlinear ship wave resistance problem. TU Delft PhD Thesis
133. Y. Reich, V. Bertram and J. Friesch (1997) The development of a decision support system for propeller design. ICCAS’97, Yokohama 363-378.
134. F.W. Riegels (1958) Aerodynamische Profile. R. Oldenbourg
135. N. Salvesen, E.O. Tuck and O. Faltinsen (1970) Ship motions and sea loads. Trans. SNAME 78 250-287.
136. H. Schlichting (1979) Boundary layer theory. 7th ed. McGraw-Hill
137. H. Schneekluth (1986) Wake equalizing duct. The Naval Architect 103 147-150. April
138. H. Schneekluth and V. Bertram (1998) Ship design for efficiency and economy. Butterworth-Heinemann
139. H. Schwanecke (1963) Gedanken zur Frage der hydrodynamisch erregten Schwingungen des Propellers und der Wellenleitung. Jahrbuch Schiffbautechnische Gesellschaft Springer 252-280.
140. S.D. Sharma (1986) Kräfte am Unter- und Überwasserschiff. Handbuch der Werften XVIII 31-43.
141. H. Söding (1982) Prediction of ship steering capabilities. Schiffstechnik 3-29.
142. H. Söding (1984) Bewertung der Manövriereigenschaften im Entwurfsstadium. Jahrbuch Schiffbautechnische Gesellschaft Springer 179-201.
143. H. Söding (1986) Kräfte am Ruder. Handbuch der Werften XVIII 47-56. Hansa-Verlag
144. H. Söding (1987) Ermittlung der Kentergefahr aus Bewegungssimulationen. Schiffstechnik 34 28-39.
145. H. Söding (1992) Speed optimization in ship operation. Ship Technology Research 39 167-174.
146. H. Söding (1993) CFD for manoeuvring of ships. 19th WEGEMT School Nantes
147. H. Söding (1993) A method for accurate force calculations in potential flow. Ship Technology Research 40 176-186.
148. H. Söding (1994) Was kann und sollte unsere Forschung im nächsten Jahrzehnt leisten? Schiff & Hafen 46/12 47-51.
149. H. Söding (1995) Wave resistance by Michell integral. Ship Technology Research 42 163-164.
150. H. Söding (1997) Wind wave spectrum. Ship Technology Research 44 71-72.
151. H. Söding (1998) Limits of potential theory in rudder flow predictions. Ship Technology Research 45 141-155.
152. H. Söding (1998) Limits of potential theory in rudder flow predictions. 22 Symp. Naval Hydrodynamics Washington
153. H. Söding and V. Bertram (1998) Schiffe im Seegang. Handbuch der Werften XXIV 151-189. Hansa-Verlag
154. J.A. Sparenberg and J. de Vries (1987) An optimum screw propeller with endplates. Int. Shipbuilding Progress 34(395), 124-133.
155. SSC (1995). Hydrodynamic impact on displacement ship hulls. Ship Structure Committee, SSC-385, SSC-385A.
156. H. Streckwall (1993) Anwendung auf Propeller. 27 Kontakt-Studium ‘Numerische Methoden in der Strömungsmechanik’. IfS Univ. Hamburg
157. Streckwall, H. (1999). Numerical techniques for propeller design. 31 WEGEMT school ‘CFD for ship and offshore design’, WEGEMT, London.
158. Swain, G. W. (2010). The importance of ship hull coatings and maintenance as drivers for environmental sustainability. RINA Conf. Ship Design and Operation for Environmental Sustainability, London.
159. K. Tanizawa and V. Bertram (1998) Slamming. Handbuch der Werften XXIV 191-210. Hansa-Verlag
160. Terswiga, T. J. C. van (1996). Waterjet-hull interaction. Ph.D. Thesis, TU Delft, ISBN 90-75757-01-8.
161. Thieme, H. (1962). Zur Formgebung von Schiffsrudern. In: Jahrbuch Schiffbautechnische Gesellschaft. Springer, pp. 381–426.
162. J.F. Thompson, Z.U.A. Warsi and C.W. Mastin (1985) Numerical Grid Generation. North-Holland
163. R.L. Townsin, D. Byrne, A. Milne and T. Svensen (1980) Speed, power and roughness: the economics of outer bottom maintenance. Trans. RINA 122 459-483.
164. R.L. Townsin and Y.J. Kwon (1983) Approximate formulae for the speed loss due to added resistance in wind and waves. Trans. RINA 125 199-207.
165. J.D. Van Manen and A. Sentic (1956) Contra-rotating propellers. Int. Shipbuilding Progress 3
166. H.K. Versteeg and W. Malalasekera (1995) An introduction to computational fluid dynamics – The finite volume method. Addison Wesley Longman
167. H. Völker (1974) Entwerfen von Schiffen. Handbuch der Werften XII 17. Hansa
168. T. Von Karman (1929) The impact of seaplane floats during landing. Washington: NACA TN 321
169. Watanabe (1986) Analytical expression of hydrodynamic impact pressure by matched asymptotic expansion technique. Trans. West-Japan Soc. Naval Arch. 71
170. L.F. Whicker and L.F. Fehlner (1958) Free stream characteristics of a family of low aspect ratio control surfaces for application to ship design. Washington: David Taylor Model Basin DTMB Report 933
171. Wolff, K. (1981). Ermittlung der Manövriereigenschaften fünf repräsentativer Schiffstypen mit Hilfe von CPMC-Modellversuchen. IfS Report. 412. Univ. Hamburg.
172. Zou, Z. J. (1990). Hydrodynamische Kräfte am manövrierenden Schiff auf flachem Wasser bei endlicher Froudezahl. IfS Report. 503. Univ. Hamburg.