Processing and Biomedical Applications of Degradable Polymeric Fibers

Biodegradable Systems in Tissue Engineering and Regenerative Medicine

Volumn , Issue , 2004, Pages 163-176

  Tuzlakoglu, K ^a   Reis, Rui L ^a  

^a UNIVERSITY OF MINHO   (Portugal)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85144159040     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9780203491232-16     Document Type: Chapter

References (73)

1. Hoffman, A.S., Medical applications of polymeric fibers, J. Appl. Poly. Sci: Appl. Poly. Symp., 31, 313, 1977.
2. Fambri, L. et al., Biodegradable fibres of poly(L-lactic acid) produced by melt spinning, Polymer, 38, 79, 1997.
3. Leenslag, J.W. and Pennings, A.J., High-strength poly(L-lactide) fibres by a dry-spinning/hot-drawing process, Polymer, 28, 1695, 1987.
4. Agboh, O.C. and Qin, Y., Chitin and chitosan fibers, Polym. Adv. Technol., 8, 335, 1997.
5. Yuan, X. et al., Characterization of poly(L-lactic acid) fibers produced by melt spinning, J. Appl. Polym. Sci., 81, 251, 2001.
6. Yamane, H. et al., Mechanical properties and higher order structure of bacterial homo poly(3-hydroxybutyrate) melt spun fibers, Polymer, 42, 3241, 2001.
7. Penning, J.P., Dijkstra, H., and Pennings, A. J., Preparation and properties of absorbable fibers from L-lactide copolymers, Polymer, 34, 942, 1993.
8. Eling, B., Gogolewski, S., and Pennings, A.J., Biodegradable materials of poly(L-lactic acid): 1. Meltspun and solution-spun fibres, Polymer, 23, 1587, 1982.
9. Postema, A.R. and Pennings, A.J., Study on the drawing behaviour of poly(L-lactide) to obtain highstrength fibers, J. Appl. Polym. Sci., 37, 2351, 1989.
10. Fu, B. et al., Structure and property of bioabsorbable poly(glycolide-co-lactide) fiber during processing and in vitro degradation, Polymer, 43, 5527, 2002.
11. Schmack, G. et al., Biodegradable fibers of poly(3-hydroxybutyrate) produced by high-speed melt spinning and spin drawing, J. Polym. Sci: Polym. Phys., 38, 2841, 2000.
12. Qian, Z. et al., Structure and property study of biodegradable polyesteramide fibers: processing and alkaline degradation behaviour, Polym. Degrad. Stab., in press.
13. Nakajima, M., Atsumi, K., and Kifune, K., Development of absorbable sutures from chitin, in Chitin, Chitosan and Related Enzymes, Zikkakis, J.P., Ed., Academic Press, Orlando, 1984, p. 227.
14. Tokura, S., Nishi, N., and Noguchi, J., Studies on chitin: preparation of chitin fibers, Polym. J., 11, 781, 1979.
15. Hirano, S. and Midorikawa, T., Novel method for the preparation of N-acylchitosan fiber and Nacylchitosan- cellulose fiber, Biomaterials, 19, 293, 1998.
16. Struszczyk, H., Wawro, D., and Nicktaszcwicz, A., in Advances in Chitin and Chitosan, Brinc, C.J., Sandford, P.A., and Zikakis, J.P., Eds., Elsevier, London, 1992, p. 580.
17. Knaul, J.Z., Hudson, S.M., and Creber, K.A.M., Improved mechanical properties of chitosan fibers, J. Appl. Poly. Sci., 72, 1721, 1999.
18. Urbanczyk, G.W., Fine structure and properties of filaments prepared from chitin derivatives, in Applications of Chitin and Chitosan, Goosen, M.F.A., Ed., Technomic, Lancaster, 1997, p. 281.
19. Hirano, S. et al., Chitosan staple fibers and their chemical modifications with some aldehydes, Carbohydr. Polym., 38, 293, 1999.
20. Knaul, J.Z. et al., Improvements in the drying process for wet-spun chitosan fibers, J. Appl. Poly. Sci., 69, 1435, 1998.
21. Tuzlakoglu, K. et al., Production and characterization of chitosan fibers and 3-D fiber mesh scaffolds for tissue engineering applications, Macromol. Biosci., 2004, in press.
22. Hirano, S. et al., Wet spun chitosan-collagen fibers, their chemical N-modifications, and blood compatibility, Biomaterials, 21, 997, 2000.
23. Tamura, H., Tsuruta, Y., and Tokura, S., Preparation of chitosan-coated alginate filament, Mater. Sci. Eng. C, 20, 143, 2002.
24. Gordeyev, S.A., Nekrasov, Y.P., and Shilton, S.J., Processing of gel-spun poly(b-hydroxybutyrate) fibers, J. Appl. Polym. Sci., 81, 2260, 2001.
25. Taylor, G.I., Electrically driven jets, Proc. R. Soc., London, 1969, 453.
26. Lee, K.H. et al., Characterization of nano-structured poly(ɛ-caprolactone) nonwoven mats via electrospinning, Polymer, 44, 1287, 2003.
27. Li, W. et al., Electrospun nanofibrous structure: A novel scaffold for tissue engineering, J. Biomed. Mater. Res., 60, 613, 2002.
28. Yoshimoto, H. et al., A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering, Biomaterials, 24, 2077, 2003.
29. Brennan, K.W., Skinner, M., and Weaver, G., Braided Surgical Sutures, U.S. Patent 4,959,069, 1990.
30. King, M.W., Designing fabrics for blood vessel replacement, Can. Text. J., 108, 24, 1991.
31. Li, Y. et al., Thermal compression and characterization of three-dimensional nonwoven PET matrices as tissue engineering scaffolds, Biomaterials, 22, 609, 2001.
32. Altman, G.H. et al., Silk-based biomaterials, Biomaterials, 24, 401, 2003.
33. Bourne, R.B. et al., In-vivo comparison of four absorbable sutures: Vicryl, Dexon Plus, Maxon, and PDS, Can. J. Surg., 31, 43, 1988.
34. Tomihata, K. et al., A new resorbable monofilament suture, Polym. Degrad. Stabil., 59, 13, 1998.
35. Boccaccini, A. et al., Composite surgical sutures with bioactive glass coating, J. Biomed. Mater. Res. Part B: Appl. Biomater., 67, 618, 2003.
36. Volova, T. et al., Results of biomedical investigations of PHB and PHB/PHV fibers, Biochem. Eng. J., 16, 125, 2003.
37. Hirano, S., Zhang, M., and Nakagawa, M., Release of glycosaminoglycans in physiological saline and water by wet-spun chitin-acid glycosaminoglycan fibers, J. Biomed. Mater. Res., 56, 556, 2001.
38. Tonello, C. et al., In vitro reconstruction of human dermal equivalent enriched with endothelial cells, Biomaterials, 24, 1205, 2003.
39. Galassi, G. et al., In vitro reconstructed dermis implanted in human wounds: degradation studies of HA-based supporting scaffold, Biomaterials, 21, 2183, 2000.
40. Carlstedt, C.A. and Nordin, M., Biomechanics of tendons and ligaments, in Basic Biomechanics of the Musculoskeletal System, Nordin, M. and Frankel, V.H., Eds., Lea & Febiger, Malvern, PA, 1989, p. 59.
41. Fisher, S.P. and Ferkel, R.D., Prosthetic Ligament Reconstruction of the Knee, Saunders, Philadelphia, 1988, p. 3.
42. Gentleman, E. et al., Mechanical characterization of collagen fibers and scaffolds for tissue engineering, Biomaterials, 24, 3805, 2003.
43. Altman, G.H. et al., Silk matrix for tissue engineered anterior cruciate ligaments, Biomaterials, 23, 4131, 2002.
44. ®, Biomaterials, 11, 41, 1990.
45. Cabaud, H.E., Feagin, J.A., and Rodkey, W.G., Acute anterior cruciate ligament injury and repair reinforced with a biodegradable intraarticular ligament: experimental studies, Am. J. Sports Med., 10, 259, 1982.
46. Laitinen, O. et al., Mechanical properties of biodegradable ligament augmentation device of poly(Llactide) in vitro and in vivo, Biomaterials, 13, 1012, 1992.
47. Durselen, L. et al., Resorbable polymer fibers for ligament augmentation, J. Biomed. Mater. Res., 58, 666, 2001.
48. Bowald, S., Busch, C., and Eriksson, I., Arterial regeneration following polyglactin 910 suture mesh grafting, Surgery, 86, 722, 1979.
49. Greisler, H.P., Endean, E.D., and Klosak, J.J., Polyglactin 910/polydioxanone biocomponent totally resorbable vascular prostheses, J. Vasc. Surg., 7, 697, 1988.
50. Shum-Tim, D. et al., Tissue engineering of autologous aorta using new biodegradable polymer, Ann. Thorac. Surg., 68, 2298, 1999.
51. Friedman, S.G. et al., A prospective randomized comparison of Dacron and polytetrafluoroethylene aortic bifurcation grafts, Surgery, 117, 7, 1995.
52. Kim, B. and Mooney, D.J., Engineering smooth muscle tissue with a predefined structure, J. Biomed. Mat. Res., 41, 322, 1998.
53. Xu, C.Y. et al., Aligned biodegradable nanofibrous structure: a potential scaffolds for blood vessel engineering, Biomaterials, 25, 877, 2004.
54. Zund, G. et al., Tissue engineering in cardiovascular surgery: MTT, a rapid and reliable quantitative method to assess the optimal human cell seeding on polymeric meshes, Eur. J. Cardio-thorac. Surg., 15, 519, 1999.
55. Zund, G. et al., The in vitro construction of a tissue engineered bioprosthetic heart valve, Eur. J. Cardio-thorac. Surg., 11, 493, 1997.
56. Engelmayr, G. et al., A novel bioreactor for the dynamic flexural stimulation of tissue engineered heart valve biomaterials, Biomaterials, 24, 2523, 2003.
57. Hoerstrup, S. et al., Tissue engineering of functional trileaflet heart valves from human marrow stromal cells, Circulation, 13, 144, 2002.
58. Saito, Y. et al., New tubular bioabsorbable knitted airway stent: biocompatibility and mechanical strength, J. Thorac. Cardiovasc. Surg., 123, 161, 2002.
59. Nguyen, K.T. et al., In vitro hemocompatibility studies of drug loaded poly-(L-lactic acid) fibers, Biomaterials, 24, 5191, 2003.
60. Nuutinen, J.T. et al., Mechanical properties and in vitro degradation of bioresorbable self-expanding braided stents, J. Biomater. Sci. Polym. Ed., 14, 255, 2003.
61. Nuutinen, J. et al., Mechanical properties and in vitro degradation of bioresorbable knitted stents, J. Biomater. Sci. Polym. Ed., 13, 1313, 2002.
62. Ma, P.X. and Langer, R., Morphology and mechanical function of long-term in vitro engineered cartilage, J. Biomed. Mater. Res., 44, 217, 1999.
63. Marijnissen, W. et al., Tissue-engineered cartilage using serially passaged articular chondrocytes. Chondrocytes in alginate, combined in vivo with a synthetic (E210) or biologic biodegradable carrier (DBM), Biomaterials, 21, 571, 2000.
64. Sanders, J.E., Bale, S.D., and Neumann, T., Tissue response to microfibers of different polymers: polyester, polyethylene, polylactic acid and polyurethane, J. Biomed. Mater. Res., 62, 222, 2002.
65. Ameer, G.A., Mahmood, T.A., and Langer, R.A., Biodegradable composite scaffold for cell transplantation, J. Orthopaed. Res., 20, 16, 2002.
66. Radice, M. et al., Hyaluronan-based biopolymers as delivery vehicles for bone-marrow-derived mesenchymal progenitors, J. Biomed. Mater. Res., 50, 101, 2000.
67. Lisignoli, G. et al., Basic fibroblast growth factor enhances in vitro mineralization of rat bone marrow stromal cells grown on non-woven hyaluronic acid based polymer scaffolds, Biomaterials, 22, 2095, 2001.
68. Denkbas, E.B., Seyyal, M., and Piskin, E., Implantable 5-fluorouracil loaded chitosan scaffolds prepared by wet spinning, J. Membrane Sci., 4461, 1, 2000.
69. ® periodontal mesh (polyglactin 90), J. Mater. Sci.: Mater. Med., 13, 59, 2002.
70. Park, Y. et al., Porous poly(L-lactide) membranes for guided tissue regeneration and controlled drug delivery: membrane fabrication and characterization, J. Control. Rel., 43, 151, 1997.
71. Yoshii, S. and Oka, M., Peripheral nerve regeneration along collagen filaments, Brain Res., 888, 158, 2001.
72. Steuer, H. et al., Biohybrid nerve guide for regeneration: degradable polylactide fibers coated with rat Schwann cells, Neurosci. Lett., 277, 165, 1999.
73. Cheng, B. and Chen, Z., Fabricating autologous tissue to engineer artificial nerve, Microsurgery, 22, 133, 2002.