Dynamic Behavior Of Materials

Dynamic Behavior of Materials

Volumn , Issue , 2007, Pages 1-668

  Meyers, Marc Andreé ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85142117129     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470172278     Document Type: Book

References (386)

1. T. D. Achenbach, Wave Propagation in Elastic Solids, North-Holland, Amsterdam, 1973.
2. H. Kolsky, Stress Waves in Solids, Dover, New York, 1963.
3. J. S. Rinehart, Stress Transients in Solids, Hyperdynamics, Santa Fe, NM, 1975.
4. A. K. Ghatak and L. S. Kothari, An Introduction to Lattice Dynamics, Addison-Wesley, Reading, MA, 1972.
5. R. J. Wasley, Stress Wave Propagation in Solids, Dekker, New York, 1973.
6. K. F. Graff, Wave Motion in Elastic Solids, Ohio State University Press, Columbus, OH, 1975
7. T. von Karman and P. Duwez, J. Appl. Phys., 21 (1959), 987.
8. A. S. Abou-Sayed, R. J. Clifton, and L. Hennann, Exptl. Mech. (1976), 127.
9. R. J. Clifton, in Mechanics Today, Vol. 1, ed. S. Nemat-Nasser, Pergamon, Elmsford, NY, 1972.
10. R. J. Clifton, J. Appl. Mech., 80 (1983), 941.
11. J. A. Zukas, T. Nicholas, H. F. Swift, L. B. Greszczuk, and D. R. Curran, Impact Dynamics, J. Wiley, New York, 1982.
12. J. A. Zukas, ed., High Velocity Impact Dynamics, Wiley, New York, 1991.
13. J. Duffy, “ The Dynamic Plastic Deformation of Metals: A Review,” AFW AL-TR-4024, Wright-Patterson Air Force Base, Dayton, OH, 1982.
14. Y. Bai and B. Dodd, Adiabatic Shear Localization, Pergamon, Oxford, UK, 1992
15. R. Courant and K. O. Friedrichs, Supersonic Flow and Shock Waves, Interscience, New York, 1956.
16. M. H. Rice, R. G. McQueen, and J.M. Walsh, Solid State Phys., 6 (1958), 1.
17. L. Davison and R. A. Graham, Phys. Rep., 55 (1979), 257.
18. R. Kinslow, ed., Hight-Velocity Impact Phenomena, Academic, New York 1966.
19. Y. B. Zeldovich and Y. P. Raizer, Physics of Shock Wave and High-Temperature Hydrodynamic Phenomena, Academic, New York, 1966.
20. L. V. Al'tshuler, Soviet Phys.-JETP, 8 (1965), 52.
21. P. C. Chou and A. K. Hopkins, eds., Dynamic Response of Metals to Intense Impulse Loading, Air Force Materials Laboratory, WP AFB, 1972.
22. J. Cagnoux, P. Chartagnac, P. Hereil, and M. Perez, Ann. Phys. Fr., 12 (1987), 451.
23. R. A. Graham, Solids under High-Pressure Shock Compression, Springer, New York, 1993.
24. A. V. Bushman, G. I. Kanel, A. L. Ni, and V. E. Fortov, Intense Dynamic Loading of Condensed Matter, Taylor and Francis, PA, 1992.
25. I. B. Zeldovich and S. A. Kompaneets, Theory of Detonation, Academic, New York, 1960.
26. L. E. Davison and J. E. Kennedy, eds., “Behavior and Utilization of Explosives in Engineering Design,” 12th Annual Symposium, March 1972, University of New Mexico.
27. W. Fickett and W. C. Davis, Detonation, University of California Press, 1979.
28. C. H. Johansson and P. A. Persson, Detonics of High Explosives, Academic, New York, 1970.
29. R. Cheret, Detonation of Condensed Explosives, Springer, New York, 1992.
30. R. A. Graham and J. R. Asay, High Temperature-High Pressure, Vol. 10, 1978, p. 355.
31. P. S. DeCarli and M. A. Meyers, in Shock Waves and High-Strain-Rate Phenomena in Metals, eds. M.A. Meyers and L. E. Murr, Plenum, New York, 1981.
32. L. C. Chabildas and R. A. Graham, Developments in Measurement Techniques for Shock Loading Solids, AMO, Vol. 83, ASME, New York 1987.
33. P. S. Follansbee, The Hopkinson Bar, Metals Handbook, Vol. 8, American Society for Metals, Metals Park, OH, 1985, p. 198.
34. T. Nicholas and S. J. Bless, Metals Handbook, Vol. 8, American Society for Metals, Metals Park, OH, 1985, p. 208.
35. K. A. Hartley, J. Duffy, and R. E. Hawley, Metals Handbook, Vol. 8, American Society for Metals, Metals Park, OH, 1985, p. 218.
36. M. F. Kanninen and S. N. Atluri, eds., Eng. Fract. Mech., 23 (1986).
37. M. A. Meyers and C. T. Aimone, Progr. Mater. Sci., 28 (1983), 1.
38. D.R. Curran, L. Seaman, and D. A. Shockey, Phys. Rep., 147 (1987), 253.
39. L. B. Freund, Dynamic Fracture Mechanics, Cambridge, 1990.
40. N. Kh. Akmadeyev, The Dynamic Failure of Solids in Tension Waves, Ufa, USSR Acad. of Sci., 1988 (in Russian).
41. L. Davison, D. Grady, and M. Shahinpoor, eds., Dynamic Fracture and Fragmentation, Springer, NY, 1994.
42. J. S. Rinehart and J. Pearson, Behovior of Metals under Impulsive Loads, American Society for Metals, Dover, 1964.
43. R. A. Graham and A. B. Sawaoka, eds., High Pressure Explosive Processing of Ceramics, Trans. Tech. Puhl., Switzerland, 1987.
44. B. Crossland, Explosive Welding of Metals and Its Application, Oxford, 1982.
45. R. Prummer, Explosivverdichtung Pulvriger Substanzen, Springer, 1987.
46. M. E. Backman, “Terminal Ballistics,” Report No. AD-A021833, National Technical lnfonnation Setvices, 1976.
47. W. P. Walters and J. J. Zukas, Fundamentals of Shoped Chorges, Wiley, New York, 1989.
48. T. Z. Blazinsky, ed., Explosive Welding, Forming, and Compaction, Applied Science Publishers, 1983.
49. L. E. Murr, ed., Shock Waves for Industrial Applications, Noyes, Park Ridge, NJ, 1990.
50. A. A. Deribas, Physics of Explosive Hardening and Welding, Nauka, Novosibirsk, USSR (in Russian) 1980.
51. C. H. Dowding, Blast Vibration Monitoring and Control, 1985, Prentice-Hall, Englewood Cliffs, NJ.
52. W. Johnson, Impact Strength of Materials, Edward Arnold, England, 1972.
53. W. Goldsmith, Impact, Edward Arnold, England, 1960.
54. P.-A. Persson, R. Holmberg, and J. Lee, Rock Blasting and Explosives Engineering, CRC, Boca Raton, 1993.
55. K. F. Graff, Wave Motion in Elastic Solids, Ohio University Press, Columbus, OH 1975.
56. R. D. Woods, J. Soil Mech. Founds, Am. Soc., Civil Eng., 94 (1968), 115.
57. H. Kolsky, Stress Waves in Solids, Dover, New York, 1963.
58. J. S. Rinehart, Stress Transients in Solids, Hyperdynamics, Santa Fe, 1975.
59. Y. C. Fung, Continuum Mechanics, Prentice-Hall, Englewood Cliffs, NJ, p. 198.
60. R. J. Wasley, Stress Wave Propagation in Solids, M. Dekker, NY, 1973.
61. L. Pochhammer, J. Reine Angew. Math., 81 (1876), 324.
62. C. Chree, Trans. Comb. Phil. Soc., 14 (1889), 250.
63. C. Chree, Q. J. Pure Appl. Math., 23 (1889), 335.
64. L. Rayleigh, Theory of Sound, Dover, New York, 1894.
65. R. M. Davies, Phil. Trans. A., 240 (1898), 375.
66. R. Skalak, J. Appl. Mech. Trans. ASME, 24 (1957), 59.
67. L. M. Barker, “SW AP-7, A Stress Wave Analyzing Program,” Report No. SC-RR-67-143, Sandia Natl. Lab., Albuquerque, 1967.
68. R. J. Clifton, in Mechanics Tpday, Vol. 1, ed. S. Nemat-Nasser, Pergamon, Elmsford, NY, 1972, p. 102.
69. L. E. Malvern, Q. Appl. Math., 8 (1951), 405.
70. V. V. Sokolovsky, Prikl. Math. Mekh., 12 (1948), 261.
71. T. von Kannan and P. Duwez, J. Appl. Phys., 21 (1950), 987.
72. G. I. Taylor, J. Inst. Civil Eng., 26 (1946), 486.
73. K. A. Rakhmatulin, Appl. Math. Metch., 9(1) (1945).
74. J. F. Bell, J. Appl. Phys., 31 (1960), 2188.
75. P. Obemhuber, S. R. Bodner, and M. Sagir, J. Appl. Math. Phys. (TAMP), 37 (1986), 714.
76. T. Nicholas, in Impact Dynamics, ed. J. Zukas et al., Wiley, New York, 1982, p. 277.
77. W. Goldsmith, Impact, Edward Arnold, London, 1960, p. 162.
78. E. H. Lee, J. Appl. Mech., 36 (1969), 1.
79. W. Hemnann and J. W. Nunziato, in Dynamic Response of Materials to Intense Impulsive Loading, eds. P. C. Chou and A. K. Hopkins, AFML, WPAFB, 1972, p. 123.
80. R. J. Clifton, in Shock Waves and the Mechanical Properties of Solids, eds. J. J. Burke and V. Weiss, Syracuse University Press, Syracuse, 1971, p. 3.
81. W. Hemnann, D. L. Hicks, and E. G. Young, V. V. Sokolovsky, Prikl. Math. Mekh., 12 (1948), 261.
82. National Materials Advisory Board, Report No. NMAB-356, 1980, National Academy of Sciences, 1980.
83. H. H. Bleich and I. Nelson, Trans. ASME, J. Appl. Mech., 33 (1966), 149.
84. T. C. T. Ting and N. Nan, Trans. ASME, J. Appl. Mech., 36 (1969), 189.
85. J. Lipkin and R. J. Clifton, J. Appl. Mech., 37 (1970), 1107.
86. A. S. Abou-Sayed, R. J. Clifton, and L. Hennann, Exptl. Mech., 6 (1976), 127.
87. K. S. Kim and R. J. Clifton, J. Appl. Mech., 47 (1980), 11.
88. R. J. Clifton, A. Gilat, and C.H. Li, in Material Behavior under High Stress and Ultrahigh Loading Rates, eds. J. Mescall and V. Weiss, Plenum, New York, 1983.
89. R. J. Clifton, J. Appl. Mech., 50 (1983), 941.
90. T. Mashimo and K. Nagayama, Jap., J. Appl. Phys., 25(Suppl. 25-1) (1986), 103.
91. B. Hopkinson, Roy. Soc. Phil. Trans., A213 (1914), 437.
92. R. M. Davies, Roy. Soc. Phil. Trans., A240 (1948), 375.
93. H. Kolsky, Proc. Roy. Soc. Lond., 62B (1949), 676.
94. R. J. Wasley, Stress Wave Propagation in Solids, Dekker, New York, 1973.
95. G. I. Taylor, Proc. Roy. Soc. Lond., 194 (1948), 289.
96. A. C. Whiffin, Proc. Roy. Soc. Lond., 194 (1947), 300.
97. M. L. Wilkins and M. W. Guinan, J. Appl. Phys., 44 (1973), 1200.
98. W. C. Davis, Sci. Am., 255(5) (1987), 105.
99. W. J. M. Rankine, Phil. Trans. Roy. Soc. Lond., 160 (1870), 270.
100. H.J. Hugoniot, J. L'Ecole Polytech., 58 (1989), 3.
101. M.A. Meyers and L. E. Murr, eds., Shock-Waves and High-Strain-Rate Phenomena in Metals, Plenum, New York, 1981, p. 1059.
102. J. M. Walsh and R. H. Christian, Phys. Rev., 91 (1955), 1554.
103. M. H. Rice, R. G. McQueen, and J. M. Walsh, Sol. State Phys., 6 (1958), 9.
104. R. G. McQueen, S. P. Marsh, J. W. Taylor, J. N. Fritz, and W. J. Carter, in High Velocity Impact Phenomena, ed. R. Kinslow, Academic, New York, 1970, p. 299.
105. C. E. Anderson, J. S. Witbeck, J.C. Hokanson, J. R. Asay, D. E. Grady, R. A. Graham, and M. E. Kipp, in Shock Waves in Condensed Matter-1985, ed. Y. M. Gupta, Plenum, New York, 1986, p. 185.
106. D. Steinberg and C. Lund, J. Appl. Phys., 65 (1989), 1528.
107. D. Steinberg, S. Cochran, and M. Guinan, J. Appl. Phys., 51 (1980), 1498.
108. R. Kinslow, ed., High Velocity Impact Phenomena, Academic, New York, 1970.
109. M. H. Rice, R. G. McQueen, and J. M. Walsh, Solid State Phys., 6 (1958), 1.
110. G. McQueen, S. P. Marsh, J. W. Taylor, J. N. Fritz, and W. J. Carter, in The Equation of State of Solids from Shock Wave Studies, High Velocity Impact Phenomena, ed. R. Kinslow, Academic, New York, 1970, p. 230.
111. P. W. Bridgman, Proc. Am. Acad. Arts Sci., 77 (1949), 189.
112. K. Gschneider, Solid State Phys., 16.
113. M. Yoshida, “Program MIXTURE,” CETR Report, New Mexico Institute of Mining and Technology, 1986.
114. R. G. McQueen, S. P. Marsh, J. W. Taylor, and W. J. Carter, in Symposium on High Dynamic Pressure, IUTAM, Paris, Gordon and Breach, New York, 1968, p. 67.
115. L. V. Al'tshuler, Soviet Phys., 8 (1965), 52.
116. C. L. Mader, Report No. LA 4381 Los Alamos Scient. Lab., Los Alamos, NM, 1970.
117. W. Herrmann, J. Appl. Phys., 40 (1969), 2490.
118. M. A. Meyers and S. L. Wang, Acta Met., 36 (1988), 925.
119. R.R. Boade, J. Appl. Phys., 39 (1968), 693.
120. K. H. Oh and P. A. Persson, J. Appl. Phys., 65 (1989), 3853.
121. J. Thouvenin, in Proc. Fourth Symposium on Detonation, Naval Ordinance Laboratory, Silver Spring, MD, 1965, p. 258.
122. R. G. McQueen and S. P. Marsh, J. Appl. Phys., 31 (1960), 1253.
123. E. Kreyszig, Advanced Engineering Mathematics, 3rd ed., Wiley, New York, 1972.
124. P. V. O'Neill, Advanced Engineering Mathematics, Wadworth, 1987.
125. R. Courant and K. O. Friedrichs, Supersonic Flow and Shock Waves, Interscience, New York, 1956.
126. P. C. Chou and A. K. Hoskins, eds., Dynamic Response of Materials to Intense Impulsive Loading, Air Force Materials Lab., Dayton, Ohio, 1972.
127. M. Wilkins, in Methods in Computational Physics, Vol. 3, Fundamental Methods in Hydrodynamics, Academic, New York, 1964, p. 211.
128. D. J. Benson, Computer Meth. Appl. Mech. Eng., 99 (1992), 235.
129. R. D. Richtmyer and K. W. Morton, Difference Methods for Initial-Value Problems, Interscience, New York, 1957.
130. J. von Neumann and R. D. Richtmyer, J. Appl. Phys., 21 (1950), 232.
131. D. J. Benson, Computer Meth. Appl. Mech. Eng., 93 (1991), 39.
132. W. Walters and J. A. Zukas, Fundamentals of Shaped Charges, Interscience, New York, 1989.
133. D. J. Benson, Computer Meth. Appl. Mech. Eng., 12 (1989), 305.
134. W. E. Drummond, J.A.P., 29 (1957), 1437.
135. L. V. Al'tschuler, S. B. Konner, M. L. Brazhnik, L. A. Vladimov, et al., Soviet Phys., JETP, 11 (1960), 766.
136. D. R. Curran, J.A.P. (1963), 2677.
137. P. C. Chou and A. K. Hopkins, eds., Dynamic Response of Materials to Intense Impulsive Loading, Air Force Materials Laboratory, Wright-Patterson Air Force Base, OH, 1972.
138. C. Y. Hsu, K. C. Hsu, M. A. Meyers, and L. E. Murr, in Shock Waves and High-Strain-Rate Phenomena in Metals, eds. M. A. Meyers and L. E. Murr, Plenum, New York, 1981, p. 433.
139. J. S. Rinehart, J.A.P., 23 (1952), 1229.
140. V. F. Nesterenko, V. M. Fomin, P. A. Cheskidov, “Attenuation of strong shock waves in laminate materials,” in Nonlinear Deformation Waves, Springer-Verlag, Berlin; N.Y., 1983, p. 191-197.
141. A. N. Dremin and O. N. Breusov, Russian Chem. Rev., 37 (1968), 392.
142. R. A. Graham, B. Morosin, E. L. Venturini, and M. J. Carr, Ann. Rev. Mat. Sci., 16 (1986), 315.
143. R. A. Graham, Proc. Symp. on High Dynamic Pressures, La Grande Motte, France, 1989.
144. R. A. Graham, Solids under High Pressure Shock Compression: Mechanics, Physics, and Chemistry, Springer-Verlag, New York, 1993.
145. F. S. Minshall, Bull. APS, 29 (1954), 23.
146. P. S. DeCarli and J. C. Jamieson, Science, 133 (1961), 1821.
147. O. R. Bergmann, in Shock Waves in Condensed Matter-1983, eds. J. R. Asay, R. A. Graham, and G. K. Straub, North-Holland, Amsterdam, 1984, p. 429.
148. G. E. Duvall and R. A. Graham, Rev. Mod. Phys., 49 (1977), 523.
149. D. Bancroft, E. L. Peterson, and S. Minshall, J. Appl. Phys., 21 (1956), 291.
150. J. C. Jamieson and A. W. Lawson, J. Appl. Phys., 33 (1962).
151. L. Barker and Hollenbach, J. Appl. Phys., 45 (1974), 4872.
152. M.A. Meyers, C. Sarzeto, and C. Y. Hsu, Met. Trans. A., llA (1980), 1737.
153. D. J. Erskine and W. J. Nellis, J. Appl. Phys., 71 (1992), 4882.
154. N. N. Thadhani and M. A. Meyers, Acta Met., 34 (1986), 1625.
155. S. N. Chang and M.A. Meyers, Acta Met., 36 (1988), 1085.
156. R. W. Rohde, J. R. Holland, and R. A. Graham, Trans. AIME, 242 (1968), 2017.
157. R. W. Rohde and R. A. Graham, Trans. AIME, 245 (1969), 2441.
158. Y. Nomura and Y. Horiguchi, Bull. Chem. Soc. Jpn., 36 (1963), 486.
159. Y. N. Ryabinin, Zhur. Tekh. Fiz., 26 (1956), 2661.
160. R. A. Graham, B. Morosin, E. L. Venturini, and M. J. Carr, Ann. Rev. Mater. Sci., 16 (1986), 315.
161. Y. Horie, R. A. Graham, and I. K. Simonsen, Mater. Lett., 3 (1985), 354.
162. N. N. Thadhani, Prog. Mater. Sci., 37 (1993), 117.
163. M. A. Meyers, L. H. Yu, and K. S. Vecchio, Acta Met. et Mat. 42 (1994) 701.
164. K. S. Vecchio, L. H. Yu, and M.A. Meyers, Acta Met. et Mat., 42 (1994) 715.
165. M. B. Boslough, J. Chem. Phys., 92 (1990), 1939.
166. L. H. Yu and M. A. Meyers, J. Mater. Sci. 26 (1991), 601.
167. A. K. Aziz, H. Hurwitz, and H. M. Sternberg, J. Appl. Phys., 4 (1961), 380.
168. R. Karpp and P. C. Chou, in Dynamic Response of Materials to Intense Impulse Loading, eds. P. C. Chou and A. H. Hopkins, Air Force Materials Laboratory, WPAFB, Dayton, Ohio, 1972.
169. M. Yoshida, Program MYIDL, CETR report, 1986.
170. J. Roth, “Correlation of the Gurney Formulae for the Velocity of ExplosivelyDriven Fragment with Detonation Parameters of the Driver Plate,” Technical Report No. 001. 71, Poulter Laboratory, Stanford Research Institute, Menlo Park, CA, 1971.
171. A. Popolato, in Behavior and Utilization of Explosives in Engineering Design, ed. R. L. Henderson, ASME Albuquerque, New Mexico 1972.
172. R. E. Duff and E. Houston, J. Chem. Phys., 23 (1955), 1268.
173. C.H. Johansson and P.A. Persson, Detonics of High Explosives, Academic, New York, 1970.
174. M. A. Cook, The Science of High Explosives, Reinhold, New York, 1958.
175. J. Taylor, Detonation in Condensed Explosives, Clarendon, Oxford, 1952.
176. G. B. Kistiakowski and E. B. Wilson, “The Hydrodynamic Theory of Detonation and Shock Waves,” Report No. 114, OSRD, 1941.
177. C. L. Mader, “Detonation Properties of Condensed Explosives Using the BKW Equation of State,” Report No. LA-2900, Los Alamos Scientific Laboratory, 1963.
178. D. L. Chapman, Lond. Edinb. Duhl. Phil. Mag., 47 (1899), 90.
179. E. Jouguet, J. Math. Pure Appl., 60 (1905), 347
180. M. A. Meyers and L. E. Murr, eds., Shock Waves and High-Strain-Rate Phenomena in Metals, Plenum, New York, 1981, Appendix A, p. 1033.
181. T. von Neumann, “Progress Report on the Theory of Detonation Waves,” Report No. 549, OSRD, 1942.
182. Y. B. Zeldovich and S. A. Kompaneets, Theory of Detonations, Academic, New York, 1970.
183. W. Fickett and W. C. Davis, Detonation, University of California Press, 1979.
184. W. Fickett, Introduction to Detonation, University of California Press, 1987.
185. Jaimin Lee, Ph.D. Thesis, New Mexico Tech., 1989.
186. W. C. Davis, Los Alamos Sci., 2 (1) (1981), 48.
187. F. P. Bowden, Proc. Roy. Soc. Lond., 246 (1958), 146.
188. D. A. Frank-Komanetski, Acta Phys. Chim. USSR, 10 (1939), 365.
189. M. J. Urizar, E. James, and L. C. Smith, Phys. Fluids, 4 (2) (1961).
190. R. A. Graham and J. R. Asay, High Temp. High Press., 10 (1978), 355.
191. L. C. Chhabildas and R. A. Graham, Techniques and Theory of Stress Measurements for Shock-Wave Applications, Vol. 83, Appl. Mech. Div., Am. Soc. Mech. Eng.
192. L. E. Chhabildas, Intl. J. Impact Eng., 8 (1987), 205.
193. J. Cagnoux, P. Chartagnac, P. Hereil, and M. Perez, Ann. Phys. Fr., 12 (1987), 451.
194. L. M. Barker and R. E. Hollenbach, J. Scient. Instr., 36 (1965), 1617.
195. L. M. Barker and R. E. Hollenbach, J. Appl. Phys., 43 (1972), 4669.
196. R. J. Clifton, Brown University, personal communication, 1987.
197. R. L. Jameson, in High Velocity Impact Dynamics, ed. J. A. Zukas, Wiley, New York, 1990, p. 831.
198. F. Jamet and G. Thomer, Flash Radiography, Elsevier, New York, 1976.
199. M. A. Meyers and C. L. Wittman, Met. Trans., 21A (1990), 3153.
200. C. L. Mader, LASL PHERMEX Data, Vols. I-III, University of California Press, Berkeley, 1976.
201. R. Green, Rev. Sci. Instr., 46 (1975), 1261.
202. F. Jamet, “La Diffraction Instanee,” Report No. CO 227/84, Institut St. Louis, France, August 1984.
203. F. Jamet, “Methodes d' Analyse de l'Etat Physique d'un Jet de Charge Creuse,” Report No. CO 227/82, Institut St. Louis, France, December 1982.
204. J. S. Wark, D. Riley, N. C. Woolsey, G. Kuhn, and R. R. Whitlock, J. Appl. Phys., 68 (1990), 4531.
205. E. Zaretsky, private communication, 1990.
206. G. E. Duvall, in Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, eds. L. E. Murr, K. P. Staudhammer, and M. A. Meyers, Dekker, New York, 1986, p. 3.
207. B. Hopkinson, Proc. Roy. Soc. A, 74 (1905), 498.
208. G. R. Johnson, ASME J. Eng. Mater. Tech., 103 (1981), 201.
209. C. J. Maiden and S. V. Green, ASME J. Appl. Mech., 33 (1966), 496.
210. H. C. Rogers, Ann. Rev. Mater. Sci., 9 (1979), 283.
211. J. Mescall and V. Weiss, eds., Material Behavior under High Stress and Ultrahigh Loading Rates, Plenum, New York, 1983.
212. G. B. Olson, J. F. Mescall, and M. Azrin, in Shock Waves and High-Strain-Rate Phenomena in Metals, eds. M. A. Meyers and L. E. Murr, Plenum, New York, 1981, p. 221.
213. T. Vinh, M. Afzali, and A. Roche, in Mechanical Behavior of Materials, Intl. Conf. on Matis, 1981, Vol. 2, Pergamon, Elmsford~ NY, p. 633.
214. H.-J. Kestenbach and M. A. Meyers, Met. Trans. A, 7 (1976), 1943.
215. W. Benedick, Behavior and Utilization of Explosives in Engineering Design, ASME, 1972.
216. P. S. DeCarli and M.A. Meyers, in Shock Waves and High-Strain-Rate Phenomena in Metals, eds. M.A. Meyers and L. E. Murr, Plenum, New York, 1981, p. 341.
217. R. N. Orava and R. H. Whittman, Proc. 5th Intl. Conf. High Energy Rate Fabrication, University of Denver, Colorado, 1975, p. 1. 1. 1.
218. R. Graham and A. Sawaoka, eds., High Pressure Explosive Processing of Ceramics, Trans. Tech. Publications, Basel, Switzerland, 1987.
219. M. Yoshida, CETR Report, New Mexico Institute of Mining and Technology, 1986.
220. E. B. Igenbergs, D. W. Jex, and E. L. Shriver, A/AA J., 13 (1975), 1024.
221. W. D. Crozier and W. Hume, J. Appl. Phys., 28 (1957), 292.
222. W. F. Feldon, Intl. J. Impact Eng., 5 (1987), 671.
223. J. J. Zukas, T. Nicholas, H. F. Swift, L. B. Greszczak, and D. R. Curran, Impact Dynamics, Wiley, New York, 1982.
224. S. Nemat-Nasser, Appl. Mech. Rev., 4S (1992), 519.
225. J. D. Campbell and W. G. Ferguson, Phil. Mag., 21 (1970), 63.
226. O. Vohringer, in Deformation Behavior of Metallic Materials, ed. C. Y. Chiem, International Summer School on Dynamic Behavior of Materials, ENSM, Nantes, September 11-15, 1989, p. 7.
227. G. R. Johnson and W. H. Cook, Proc. 7th Intern. Symp. Ballistics, Am. Def. Prep. Org. (ADPA), Netherlands, 1983.
228. G. R. Johnson, J. M. Hoegfeldt, U. S. Lindholm, and A. Nagy, ASME J. Eng. Mater. Tech., 105 (1983), 42.
229. L. W. Meyer, in Shock-Wave and High-Strain-Rate Phenomena in Materials, eds. M. A. Meyers, L. E. Murr, and K. P. Staudhammer, Dekker, New York, 1992.
230. R. W. Klopp, R. J. Clifton, and T. G. Shawki, Mech. Mater., 4 (1985), 375.
231. T. Vinh, M. Afzali, and A. Rocke, in Mechanical Behavior of Materials, Proc. ICM, eds. A. K. Miller and R. F. Smith, Pergamon, New York, 1979, p. 633.
232. J. D. Campbell, A. M. Eleiche, and M. C. C. Tsao, in Fundamental Aspects of Structural Alloy Design, Plenum, New York, 1977, p. 545.
233. J. Harding, in Impact Loading and Dynamic Behavior of Materials, eds. C. Y. Chiem, H. D. Kunze, and L. W. Meyer, DGM-lnfonnationsgesellschaft, Oberursel, Gennany, 1988, p. 21.
234. R. J. Clifton, J. Appl. Mech., 60 (1983).
235. M.A. Meyers and K. K. Chawla, Mechanical Metallurgy: Principles and Applications, Prentice-Hall, Englewood Cliffs, NJ, 1984.
236. J. J. Gilman and W. G. Johnston, Dislocations and Mechanical Properties of Crystals, Wiley, New York, 1957, p. 116.
237. W. G. Johnston and J. J. Gilman, J. Appl. Phys., 33 (1959), 129.
238. D. F. Stein and J. R. Low, Jr., J. Appl. Phys., 32 (1960), 362.
239. J. D. Eshelby, Proc. Phys. Soc. (Lond.), A12 (1949), 307.
240. J. Weertman, in Response of Metals to High Velocity Deformation, AIME Proc., P. G. Shewmon and V. F. Zackay, eds., Interscience, New York, 1961, p. 205.
241. J. Weertman and J. R. Weertman, Elementary Dislocation Theory, MacMillan, New York, 1964.
242. J. Weertman and J. R. Weertman, in Dislocations in Solids, Vol. 3, ed. F. R. N. Nabarro, Elsevier/North-Holland, New York, 1980, p. 1.
243. J. D. Eshelby, Proc. Phys. Soc. (Lond.), B69 (1956), 1013.
244. J. Weertman, J. Appl. Phys., 38 (1967), 5293.
245. J. H. Weiner and M. Pear, Phil. Mag., 31 (1975), 679.
246. L. E. Murr, in Shock Waves and High-Strain-Rate Phenomena in Metals, eds. M. A. Meyers and L. E. Murr, Plenum, New York, 1981, p. 607.
247. A. A. Deribas, I. N. Gavriliev, T. M. Sobolenko, and T. S. Teslenko, in Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, eds. L. E. Murr, K. P. Staudhammer, and M.A. Meyers, Dekker, New York, 1986, p. 345.
248. R. N. Wright and D. E. Mikkola, in Shock Waves and High-Strain-Rate Phenomena in Metals, eds. M. A. Meyers and L. E. Murr, Plenum, New York, 1981, p. 703.
249. G. A. Stone, R. N. Orava, G. T. Gray, and A. R. Pelton, “An Investigation of the Influence of Shock-Wave Profile on the Mechanical and Thermal Responses of Polycrystalline Iron,” Report No. SMT-1-78, U.S. Anny Research Office Final Report, Grant No. DAA G29-76-G-0180, September 1978.
250. J. S. Rinehart and J. Pearson, Behavior of Metals under Impulsive Loads, American Society for Metals, Cleveland, OH, 1954.
251. C. S. Smith, Trans. AIME, 212 (1958) 574.
252. G. E. Dieter, in Strengthening Mechanisms in Solids, American Society for Metals, Metals Park, OH, 1962, p. 279.
253. G. E. Dieter, in Response of Metals to High-Velocity Deformation, eds. P. W. Shewmon and V. F. Zackay, lnterscience, New York, 1961, p. 409.
254. E.G. Zukas, Metals Eng. Quart., 6 (1966), 1.
255. R. N. Orava and H. E. Otto, in Principles and Practice of Explosive Metalworking, Industrial Newspapers, Ltd., ed. A. A. Ezra, Chapter 11, (1973), 229.
256. W. C. Leslie, in Metallurgical Effects at High Strain Rates, eds. R. W. Rohde, B. M. Butcher, J. R. Holland, and C. H. Karnes, Plenum, New York, 1973, p. 571.
257. L. Davison and R. A. Graham, Phys. Rep., 55 (1979), 255.
258. L. E. Murr, in Shock Waves in Condensed Matter, eds. S. C. Schmidt and N. C. Holmes, Elsevier, Amsterdam, 1988, p. 315.
259. L. E. Murr, in Shock Waves for Industrial Applications, ed. L. E. Murr, Noyes, Park Ridge, NJ, 1988, p. 60.
260. M.A. Meyers and L. E. Murr, in Explosive Welding, Forming, and Compaction, ed. T. Z. Blazynski, Applied Science, Elsevier, London, 1983, p. 17.
261. M.A. Meyers and L. E. Murr, in Shock Waves and High-Strain-Rate Phenomena in Materials, Plenum, New York, 1981, p. 487.
262. L. E. Murr and M.A. Meyers, in Explosive Welding, Forming, and Compaction, ed. T. Z. Blazynski, Applied Science, Elsevier, London, 1983, p. 83.
263. G. T. Gray, in Shock-Wave and High-Strain-Rate Phenomena in Materials, eds. M.A. Meyers, L. E. Murr, and K. P. Staudhammer, Dekker, New York, 1992, p. 899.
264. G. T. Gray III, in High Pressure Shock Compression of Solids, eds. J. R. Asay and M. Shahinpoor, Springer-Verlag, New York, 1993.
265. G. E. Duvall and R. A. Graham, Rev. Modem Phys., 49 (1977), 523.
266. M. A. Meyers, “Thennomechanical Processing of a Nickel-Base Superalloy by Cold Rolling and Shock-Wave Deformation,” Ph.D. Thesis, University of Denver, 1974.
267. J. Weertman and P. S. Follansbee, Mech. Mater., 2 (1983), 265.
268. P. S. Follansbee and J. Weertman, Mech. Mater., 1 (1982), 345.
269. J. Weertman, Mech. Mater., 5 (1986), 13.
270. H. Kressel and N. Brown, J. Appl. Phys., 38 (1967), 138.
271. L. E. Murr, O. T. Inal, and A. A. Morales, Acta Met., 24 (1976), 261.
272. R. A. Graham, in Shock Waves and High-Strain-Rate Phenomena in Metals, eds. M.A. Meyers and L. E. Murr, Plenum, New York, 1981, p. 375.
273. M.A. Mogilevsky, Comb. Expl. Shock Waves, 6 (1970), 197.
274. J. Weertman, in Response of Metals to High Velocity Deformation, eds. P. G. Shewmon and V. F. Zackay, Interscience, New York, 1961, p. 205.
275. R. L. Nolder and G. Thomas, Acta Met., 11 (1963), 994.
276. R. L. Nolder and G. Thomas, Acta Met., 12 (1964), 227.
277. F. Greulich and L. E. Murr, Mater. Sci. Eng., 39 (1979), 81.
278. R. J. DeAngelis and J. B. Cohen, J. Metals, 15 (1963), 681.
279. A. S. Appleton and J. S. Waddington, Acta Met., 12 (1963), 681.
280. A. R. Champion and R. W. Rohde, J. Appl. Phys., 41 (1970), 2213.
281. K. P. Staudhammer and L. E. Murr, Proc. 5th Intl. Conf. on High Energy Rate Fabr., University of Denver, Denver, CO, 1975, p. 1-71.
282. L. E. Murr and K. P. Staudhammer, Mater. Sci. Eng., 20 (1975), 95.
283. C. N. Reid, G. T. Hahn, and A. Gilbert, R. W. Rohde et al., Meta/I. Trans., 3A (1972), 386.
284. T. Takeuchi, J. Phys. Soc. Jpn., 21 (1966), 2616.
285. R. M. Wright, D. E. Mikkola, and S. LaRouche, in Shock Waves and HighStrain-Rate Phenomena in Metals, eds. M.A. Meyers, and L. E. Murr, Plenum, New York, 1981, p. 703.
286. J.B. Cohen and J. Weertman, Acta Met., 11 (1963), 997, 1368.
287. J.P. Hirth and J. Lothe, Theory of Dislocations, McGraw-Hill, New York, 1968, p. 750.
288. E. Orowan, Dislocations in Metals, AIME, New York, 1954, p. 116.
289. G. E. Duvall and R. A. Graham, Rev. Modem Phys., 49 (1977), 523.
290. J. R. Patel and M. Cohen, Acta Met., 1 (1953), 531.
291. R. W. Rohde, J. R. Holland, and R. A. Graham, Trans. Met. Soc. AIME, 242 (1968), 2017.
292. M. A. Meyers and J. R. C. Guimaraes, Mater. Sci. Eng., 24 (1976), 289.
293. M. A. Meyers, Met. Trans., lOA (1979), 1723.
294. Y. Sano, S. N. Chang, M. A. Meyers, and S. Nemat-Nasser, Acta Met. Mat., 40 (1992), 413.
295. N. N. Thadhani and M.A. Meyers, Acta Met., 34 (1986), 1625.
296. M. A. Meyers, Scrip ta Met., 9 (1975), 667.
297. G. T. Gray and C. E. Morris, J. Phys. IV, Colloque C3, Suppl. to J. Phys. Ill (1991), C3-191.
298. M.A. Meyers, Met. Trans., 8A (1977), 1581.
299. M.A. Meyers, H.-J. Kestenbach, and C. A. Soares, Mater. Sci. Eng., 45 (1980), 143.
300. J. T. Fourie, P. J. Jackson, D. Kuhlmann-Wilsdorf, D. A. Rigney, J. H. van der Merwe, and H. G. F. Wilsdorf, Ser. Met., 16 (1982), 157.
301. P. Charsley and D. Kuhlmann-Wilsdorf, Phil. Mag., 44 (1981), 1351.
302. C. S. Yust and L. A. Harris, in Shock Waves and High-Strain-Rate Phenomena in Metals, eds. M. A. Meyers and L. E. Murr, Plenum, New York, 1981, p. 881.
303. L. H. Leme and M.A. Meyers, J. Mater. Sci., 24 (1989), 2516.
304. Y. Wang and D. E. Mikkola, in “Shock-Wave and High-Strain-Rate Phenomena in Materials,” eds. M.A. Meyers, L. E. Murr, and K. P. Standhammer, Dekker, New York, 1992, p. 1031.
305. H. C. Rogers, Ann. Rev. Mat. Sci., 9 (1979), 283.
306. S. P. Timothy, Acta Metall., 35 (1987), 301.
307. J. Mescall and V. Weiss, eds., Material Behavior under High Stress and Ultrahigh Loading Rates, Plenum, New York, 1983.
308. R. Donneval, “Adiabatic Shear Phenomena,” in Impact Loading and Dynamic Behavior of Materials, eds. C. Y. Chiem, H.-D. Kunze, and L. W. Meyer, DOM Informationsgesellschaft, Oberusel, Gennany, 1988, p. 43.
309. A. J. Bedford, A. L. Wingrove, and K. R. L. Thompson, J. Austr. Inst. Met., 19 (1974), 61.
310. R. J. Clifton, “Material Response to Ultra High Loading Rates,” Report No. NMAB-356, National Materials Advisory Board Com., Washington, DC, 1980, p. 129.
311. G. B. Olson, J. F. Mescall, and M. Azrin, in Shock Waves and High-Strain-Rate Phonomena in Metals, eds. M. A. Meyers and L. E. Murr, Plenum, New York, 1981, p. 221.
312. C. Zener and J. H. Hollomon, J. Appl. Phys., 15 (1944), 22.
313. A. Marchand and J. Duffy, J. Mech. Phys. Solids, 36 (1988), 251.
314. F. R. Recht, J. Appl. Mech., 31 (1974), 189.
315. M. A. Meyers and H.-r. Pak, Acta Metall., 34 (1986), 2493.
316. U. S. Lindholm and G. R. Johnson, in Material Behavior under High Stress and Ultrahigh Loading Rates, eds. J. Mescall and V. Weiss, Plenum, New York, 1983, p. 61.
317. T. W. Wright, J. Mech. Phys. Sol. (1989).
318. Y. Bai, C. Cheng, and S. Yu, Acta Mech. Sinica, 2 (1986), 1.
319. T. W. Wright and J. W. Walter, J. Mech. Phys. Sol., 35 (1987), 701.
320. D. E. Grady, J. Geophys. Res., 82-B2 (1980), 913.
321. D. E. Grady and M. E. Kipp, J. Mech. Phys. Sol., 35 (1987), 95.
322. T. J. Bums and K. R. L. Trucano, Mech. Mat. (1982), 313.
323. A. Molinari and R. J. Clifton, C. R. Acad. Sci. Paris 296(1983)1.
324. T. W. Wright, J. Mech. Phys. Sol., 35 (1987), 269.
325. S. Kuriyama and M.A. Meyers, Met. Trans. A, 17A (1986), 443.
326. M.A. Meyers and S. Kuriyama, in Shock Waves in Condensed Matter-1985, ed. Y. M. Gupta, Plenum, New York, 1986, p. 321.
327. D. R. Curran and L. Seaman, in Shock Waves in Condensed Matter-1985, ed. Y. M. Gupta, Plenum, New York,,1986, p. 315.
328. D. A. Shockey, D. R. Curran, and L. Seaman, “Development of Improved Dynamic Failure Models,” Final Technical Report to U.S. Anny Research Office, Contract DAA-29-81-0123, February 15, 1985.
329. G. L. Moss, in Shock Waves and High-Strain-Rate Deformation of Metals: Concepts and Applications, eds. M. A. Meyers and L. E. Murr, Plenum, New York, 1981, p. 299.
330. Y. J. Chen, M. A. Meyers, F. Marquis, and J. Isaacs, unpublished results, 1994.
331. G. Subhash, Y. J. Lee, and G. Ravichandran, Acta Met. et Mat., 42 (1994), 319.
332. G. Subhash, Y. J. Lee, and G. Ravichandran, Acta Met. et Mat., 42 (1994), 331.
333. H. C. Rogers and C. V. Shastry, in Shock-Waves and High-Strain-Rate Phenomena in Metals, M. A. Meyers and L. E. Murr, Plenum, New York, 1981, p. 285.
334. D. Broek, Elementary Engineering Fracture Mechanics, Martinus Nijhoff, The Hague, Netherlands, 1982.
335. J. F. Knott, Fundamentals of Fracture Mechanics, Butterworth, London, 1973.
336. R. W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, 3rd ed., Wiley, New York, 1989.
337. B. Hopkinson, The Effects of the Detonation of Guncotton, Scientific Papers, Cambridge University Press, Cambridge, 1921.
338. J. S. Rinehart and J. Pearson, Behavior of Metals under Impulsive Loads, American Society of Metals, Metals Park, Ohio, 1954.
339. H. Kolsky, Stress Waves in Solids, Dover, NJ, 1963.
340. J. D. Achenbach, “Dynamic Fracture Effects in Brittle Materials,” in Mechanics Today, Vol. 1, ed. S. Nemat-Nasser, Pergamon, New York, 1972, p. 1.
341. L. B. Freund, “The Analysis of Elastodynamic Crack Tip Stress Fields,” in Mechanics Today, Vol. 3, ed. S. Nemat-Nasser, Pergamon, New York, 1976, p. 55.
342. L. B. Freund, Dynamic Fracture Mechanics, Cambridge University Press, Cambridge, 1990.
343. K. B. Broberg, Arch. Jar Fysik, 18 (1960), 159.
344. J. W. Craggs, J. Mech. Phys. Sol., 8 (1960), 66.
345. B. R. Baker, J. Appl. Mech., 29 (1962), 449.
346. L. B. Freund, J. Mech. Phys. Sol., 20 (1972), 129.
347. L. B. Freund, J. Mech. Phys. Sol., 20 (1972), 141.
348. L. B. Freund, J. Mech. Phys. Sol., 21 (1973), 47.
349. L. B. Freund, Int. J. Eng. Sci., 12 (1974), 179.
350. G. Birkhoff, D. P. MacDougall, E. M. Pugh, and G. I. Taylor, J. Appl. Phys., 19 (1948), 563.
351. L. R. Carl, Met. Prog., 46 (1944), 102.
352. A. A. Deribas, in Shock Waves and High-Strain-Rate Phenomena in Metals, eds. M. A. Meyers and L. E. Murr, Plenum, New York, 1981, p. 915.
353. E. M. Pugh, R. J. Eichelberger, and N. Rostoker, J. Appl. Phys., 23 (1952), 532.
354. S. K. Godunov, A. A. Deribas, and V. I. Mali, Fizika Goreniya i Vzryva, 11 (1975).
355. F. I. Grace, B. R. Scott, and S. K. Golaski, Proc. 8th Intl. Symp. Ballistics, ADPA, October 1984.
356. M. Raftenberg, U. S. Ballistic Research Laboratory, private communication, 1991.
357. F. I. Grace, in Shock-Wave and High-Strain Rate Phenomena in Materials, eds. M.A. Meyers, L. E. Murr, and K. P. Staudhammer, Dekker, New York, 1992.
358. P. C. Chou and J. Carleone, J. Appl. Phys., 48 (1977), 4187.
359. P. C. Chou and W. J. Flis, Propell. Expl. Pyrotech., 11 (1986), 99.
360. T. W. Wright, in Computational Aspects of Penetration Mechanics, eds. J. Chandra and J. E. Flaherty, Springer, 1983, p. 85.
361. W. Bruchey in Computational Aspects of Penetration Mechanics, eds. J. Chandra and J. E. Flaherty, Springer, 1983.
362. Backman and Goldsmith, Intl. J. Eng. Sci., 16 (1978), 1.
363. J. A. Zukas, T. Nicholas, H. F. Swift, L. G. Greszczuk, and D. R. Curran, Impact Dynamics, Wiley, New York, 1982.
364. J. A. Zukas, ed., High-Velocity Impact Dynamics, Wiley, New York, 1990.
365. R. F. Bishop, R. Hill, and N. F. Mott, Proc. Phys. Soc., 57 (1945), 147.
366. V. P. Alekseevskii, Fizika Goreniya i Vzryva, 2 (1966), 99.
367. D. R. Christman and J. W. Gehring, J. Appl. Phys., 37 (1966), 1579.
368. A. Tate, Intl. J. Impact Eng., 9 (1990), 327.
369. M. Ravid, S. R. Bodner, and I. Holoman, Intl. J. Eng. Sci., 25 (1987), 473.
370. T. W. Wright and K. Frank, in Impact: Effects of Fast Transient Loadings, eds. W. J. Ammann, W. K. Liu, J. A. Studer, and T. Zimmermann, Balkema, 1988.
371. L. H. Yu and M. A. Meyers, J. Mater. Sci. 26 (1991), 601.
372. L. H. Yu, M.A. Meyers, and N. N. Thadhani, J. Mater. Sci. 5 (1990), 302.
373. M. A. Meyers, L. E. Murr, and B. B. Gupta, J. Met. 33 (1981), 21.
374. R. Graham, Sandia National Laboratories, private communication, 1991.
375. M. A. Meyers and H.-R. Pak, J. Mater. Sci., 20 (1985), 2140.
376. M. A. Meyers, L. H. Yu and M. S. Hsu, unpublished results (1994).
377. L. E. Alvarez, W. Alvarez, F. Asaro, and H. V. Michel, Science, 208 (1980), 1095.
378. J. D. O'Keefe and T. J. Ahrens, Nature, 298 (1982), 123.
379. J. D. O'Keefe and T. J. Ahrens, Proc. Conj. on Large Body Impacts and Terrestrial Evolution, Sp. Paper No. 190, Geological Society of America, 1982, p. 103.
380. H. J. Melosh, Impact Cratering, Oxford University Press, New York, 1989.
381. J. D. O'Keefe and T. J. Ahrens, Proc. Conf. on Large Body Impacts and Terrestrial Evolution, Sp. Paper No. 190, Geological Society of America, 1982, p. 103.
382. J. D. O'Keefe and T. J. Ahrens, Proc. 6th Lunar Sci. Conj. (1975), p. 2831.
383. J. D. O'Keefe and T. J. Ahrens, Phys. Earth Plan. Int. 16 (1978), 341.
384. T. J. Ahrens, in Shock Waves in Condensed Matter, ed. Y. M. Gupta, Plenum, New York, 1986, p. 571.
385. M.A. Lange and T. J. Ahrens, J. Earth Plan. Sci. Lett., 77 (1986), 409.
386. C. T. Aimone, M.A. Meyers, and N. Mojtabai, in Rock Mechanics in Productivity and Protection, eds. C. H. Dowding and M. M. Singh, SME-AIME, New York, 1984, p. 979.