Sustainability of Concrete

Sustainability of Concrete

Volumn , Issue , 2011, Pages 1-301

  Aïtcin, Pierre Claude ^b   Mindess, Sidney ^a  

^a UNIVERSITY OF BRITISH COLUMBIA   (Canada)

^b NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85140179429     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9781482266696     Document Type: Book

References (239)

1. Bentz, D. and Aïtcin, P.-C. (2008), ‘The Hidden Meaning of the Water/Cement Ratio’, Concrete International, Vol. 30, No. 5, pp. 51–54.
2. Neville, A.M. (2006), Concrete: Neville’s Insights and Issues, Thomas Telford, London, UK, 314 p.
3. Bentz, D.P., Irassar, E.F., Bucher, B.E. and Weiss, W.J. (2009), ‘Limestone Fillers Conserve Cement’. Part 1: Concrete International Vol. 31, No. 11, pp. 41-46; Part 2: Concrete International Vol. 31, No. 12, pp. 35-39.
4. Brundtland, G. (ed) (1987), Our Common Future: The World Commission on Environment and Development, Oxford University Press, Oxford.
5. Hooton, R.D., Nokken, M.R. and Thomas, M.D.A. (2007), Portland-Limestone Cement: State-of-the-Art Report and Gap Analysis for CSA A3000, Cement Association of Canada Research and Development Report SN3053, 59 p. Lachemi, M., Hossain, K.M.A., Shehata, M. and Thaha, W. (2007), ‘Characteristics of Controlled Low-Strength Materials Incorporating Cement Kiln Dust’, Canadian Journal of Civil Engineering Vol. 34, No. 4, pp. 485-495.
6. Lachemi, M., Hossain, K.M.A., Lotfy, A., Shehata, M. and Sahmaran, M. (2009), ‘CLSM Containing Cement Kiln Dust’, Concrete International Vol. 31, No. 6, pp. 47-52.
7. Malhotra, V.M. (1994), ‘CANMET Investigations Dealing with High-Volume Fly Ash in Concrete’, in Advances in Concrete Technology, 2nd edition, CANMET, Ottawa, Canada, pp. 445-482.
8. Rohde, R.A. (2006), Image created by Robert A. Rohde/Global Warming Art, http://en.wikipedia.org/wiki/File: Greenhouse-Gas-by-Sector-png.
9. Shao, Y. and Shi, C. (2006), ‘Carbonation Curing for Making Concrete Products -An Old Concept and a Renewed Interest’, in Proceedings of the 6th International Symposium on Cement and Concrete, Vol. 2, pp. 823-830.
10. Shi, C. and Wu, Y. (2009), ‘CO2 Curing of Concrete Blocks’, Concrete International, Vol. 31, No. 2, pp. 39-43.
11. Steinour, H.H. (1959), ‘Some Effects of Carbon Dioxide on Mortar and Concrete - Discussion’, Proceedings of the American Concrete Institute, Vol. 55, pp. 905-907.
12. The Concrete Centre (2007), Sustainable Concrete, The Concrete Centre, Surrey, UK.
13. Thomas, M.D.A., Hooton, D., Cail, K., Smith, B.A., de Wal, J. and Kazanis, K.C. (2010), ‘Field Trials of Concrete Products with Portland Limestone Cement’, Concrete International, Vol. 32, No. 1, pp. 35-41.
14. Young, J.F., Berger, R.L. and Breese, J. (1974), ‘Accelerated Curing of Compacted Calcium Silicate Mortars on Exposure to CO2’, Journal of the American Ceramic Society, Vol. 57, No. 9, pp. 394-397.
15. ACI COMMITTEE 116, Cement and Concrete Terminology, American Concrete Institute, Farmington Hills, MI.
16. Aïtcin, P.-C. (1998), High Performance Concrete, E and FN Spon, London, 591p.
17. Bogue, R.H. (1952), La Chimie du Ciment Portland, Eyrolles, Paris.
18. Neville, A.M. (1996), Personal communication.
19. Abrams, D.A. (1918), Design of Concrete Mixtures, Bulletin 1, Structural Materials Research Laboratory, Lewis Institute, Chicago.
20. Aïtcin, P.-C. (1998), High Performance Concrete, E and FN Spon, London, UK, 591 p.
21. Aïtcin, P.-C. and Neville, A.M. (2003), ‘How the Water-Cement Ratio Affects Concrete Strength’, Concrete International, Vol. 25, No. 8, pp. 51-58.
22. Albinger, J. and Moreno, J. (1991), ‘High Strength Concrete: Chicago Style’, Concrete Construction, Vol. 26, No. 3, pp. 241-245.
23. Barton, R.B. (1989), ‘Water-Cement Ratio is Passé’, Concrete International, Vol. 11, No. 11, pp. 75-78.
24. Bentz, D.P. and Aïtcin, P.-C. (2008), ‘The Hidden Meaning of the Water-to-Cement Ratio’, Concrete International, Vol. 30, No. 5, pp. 51-54.
25. Cross, D., Stephens, J. and Berry, M. (2010), ‘Sustainable Construction Contributions from the Treasure State’, Concrete International, Vol. 32, No. 5, pp. 41-46.
26. Féret, R. (1892), ‘Sur la capacité des mortiers hydrauliques’, Annales des Ponts et Chaussées, 2nd semestre, pp. 5-61.
27. Gebauer, J., Ko, S.-C., Lerat, A. and Roumain, J.C. (2005), ‘Experience with a New Cement for Special Applications’, 2nd International Symposium on Non-Traditional Cement and Concrete, Brno, pp. 277-283.
28. Kosmatka, S.H. (1991), ‘In Defence of the Water-Cement Ratio’, Concrete International, Vol. 13, No. 9, pp. 65-69.
29. Kosmatka, S.H., Kerkoff, B., Panarese, W.C., McLeod, N.F. and McGrath, R.J. (2002), Design and Control of Concrete Mixtures, 7th edition, Cement Association of Canada, Ottawa, Canada, 368 p.
30. Aïtcin, P.-C. (2007a), Binders for Durable and Sustainable Concrete, Taylor and Francis, London.
31. Aïtcin, P.-C. (2007b), Standard Performance - Are We Testing the Right Performance? CCCI 2007, Montréal.
32. Aïtcin, P.-C. (2007c), ‘The Use of Blast Furnace Slag and Class C Fly Ash as a Source of Raw Material to Decrease Significantly the Amount of CO2 during the Fabrication of Portland Cement Clinker’, Terry Holland Symposium 5th ACI/CANMET International Conference, Warsaw, May 2007.
33. Birchall, J.D. and Kelly, A. (1983), ‘New Inorganic Materials’, Scientific American, Vol. 248, No. 5, pp. 104-115.
34. Dumez, H. and Jeunemaitre, A. (2000), Understanding and Regulating the Market at a Time of Globalization - The Case of the Cement Industry, MacMillan, London, 238 p.
35. Gebauer, J., Ko, S.-C., Lerat, A., Roumain, J.-C. (2005), ‘Experience with a New Cement for Special Applications’, 2nd International Symposium on Non-traditional Cement and Concrete, Brno, pp. 277-283.
36. Hawken, P., Lovins, A. and Hunter Lovins, L. (1999), Natural Capitalism, Little, Brown and Company, Boston, USA, 70 p.
37. Kreijger, P.C. (1980), ‘Plasticizers and Dispersing Admixtures’, Concrete International, The Construction Press, London, UK, pp. 1-16.
38. Malhotra, M. (2006), ‘Reducing CO2 Emissions’, Concrete International, Vol. 28, No. 9, pp. 42-45.
39. Marciano, E. (2003), PhD thesis, ‘Sustainable Development in the Cement and Concrete Industries’, Thesis No. 1452, Université de Sherbrooke.
40. Mehta, P.K. (2000), Concrete Technology for Sustainable Development - An Overview of Essential Elements, in Concrete Technology for a Sustainable Development in the 21st Century, E and FN Spon, London, pp. 83-94.
41. Mitchell, D. (2006), ‘What does this all Mean to the Stuctural Engineer?’ in Anna Maria Workshop, Sustainability in the Cement and Concrete Industry, 8 p. Scheubel, B. and Natchwey, W. (1997), ‘Development of Cement Technology and its Influence on the Refractory Kiln Lining’, in Refrakolloquium ‘97, Refratechnik GmbH, Göttingen, Germany, pp. 25-43.
42. Aïtcin, P.-C. (1983), Condensed Silica Fume, Les editions de l’Université de Sherbrooke, 52 p.
43. Aïtcin, P.-C. (1998), High Performance Concrete, E and FN Spon, London, UK, 591p.
44. Aïtcin, P.-C. (2007), ‘The Use of Blast-Furnace Slag and Class C Fly Ash on a Source of Raw Material to Decrease Significantly the Amount of CO2 during the Fabrication of Portland Cement Clinker’, in Terry Holland Symposium, 5th ACI/CANMET International Conference, Warsaw, Poland, pp. 175-189.
45. Aïtcin, P.-C. (2008), Binders for Durable and Sustainable Concrete, Taylor and Francis, London, UK, 500 p.
46. Aïtcin, P.-C., Autefage, F., Carles-Gibergues, A. and Vaquier, A. (1986), ‘Comparative Study of Cementitious Properties of Different Fly Ashes’, in 2nd International Conference on the Use of Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Madrid, Spain, pp. 94-114.
47. Aitcin, P.-C., Sarkar, S., Ranc, R. and Lévy, C. (1991), ‘A High Silica Modulus Cement for High Performance Concrete’, in Advances in Cementitious Materials, Ceramic Transactions, Vol. 16, pp. 103-121.
48. Bédard, C. (2005), PhD Thesis (in French), Interactions Superplastifiant-ciment avec Ajouts Cimentaires; Influence sur la Rhéologie, Thesis No. 1570, Université de Sherbrooke, Sherbrooke, Quebec, Canada.
49. Coppola, L., Troli, R., Cerulli, T. and Collepardi, M. (1996), ‘The Influence of Materials on the Performance of Reactive Powder Concrete’, in International Conference on High-Performance Concrete and Performance and Quality of Concrete Structures, Folorianopolis, Brazil, pp. 502-513.
50. Gebauer, J., Ko, S.C., Lerat, A. and Roumain, J.-C. (2005), ‘Experience with a New Cement for Special Applications’, in 2nd International Symposium on Non-Traditional Cement and Concrete, Brno, Czech Republic, pp. 277-283.
51. Goldman, A. and Bentur, B. (1993), ‘The Influence of Micro Fillers on Enhancement of Concrete Strength’, Cement and Concrete Research, Vol. 23, No. 8, pp. 962-972.
52. Holland, T. (2005), Silica Fume User’s Manual, Federal Highway Administration, Washington, DC, USA, FHWA-1F-05-106, 193 p.
53. Humboldt Wedag (1986), ‘L’Évolution technologique du four rotatif avec préchaffeur à cyclones vers le four court PYRORAPIDfi’, technical document 11.0/f by KHD Humboldt Wedag AG.
54. Jensen, O. and Jensen, F. (2001), ‘Water-entrained Cement-based Materials: Principle and Theorical Background’, Cement and Concrete Research, Vol. 31, No. 4, pp. 647-654.
55. Kett, J. (2000), Engineered Concrete - Mix Design and Test Methods, CRC Press, Boca Raton, USA, 170 p.
56. Lafuma, H. (1951), Liants Hydrauliques, Dunod, Paris, 139 p.
57. Laldji, S. and Tagnit-Hamou, A. (2006), ‘Properties of Ternary and Quaternary Concrete Incorporating New Alternative Cementitious Material’, ACI Materials Journal, Vol. 103, No. 2, pp. 83-89.
58. Laldji, S. and Tagnit-Hamou, A. (2007), ‘Glass-Frit for Concrete Structures: a New Alternative Cementitious Material’, Canadian Journal of Civil Engineering, Vol. 34, pp. 793-802.
59. Malhotra, V.M. (2006), ‘Reducing CO2 Emissions - The Role of Fly Ash and Other Supplementary Cementitious Materials’, ACI Concrete International, Vol. 28, No. 7, pp. 42-45
60. Malhotra, V.M. (2002), ‘High-Performance Fly Ash Concrete’, ACI Concrete International, Vol. 24, No. 7, pp. 35-40.
61. Malhotra, V.M. and Mehta, P.K. (1996), Pozzolanic and Cementitious Materials, Gordon and Breach, 191 p.
62. Massazza, F. (1998), ‘Pozzolans and Pozzolanic Cements’, in Lea’s Chemistry of Cement and Concrete, Arnold, London, pp. 478-632.
63. Mehta, P.K. and Manmohan, D. (2006), ‘Sustainable High-Performance Concrete Structures - The U.S. Experience with High-volume Fly Ash Concrete’, ACI Concrete International, Vol. 28, No. 7, pp. 37-42.
64. Nehdi, M., Mindess, S. and Aïtcin, P.-C. (1996), ‘Optimisation of High-strength Limestone Filler Cement Mortars’, Cement and Concrete Research, Vol. 26, No. 6, pp. 883-893.
65. Nkinamubanzi, P.C. and Aïtcin, P.-C. (1999), ‘The Use of Slag in Cement and Concrete in a Sustainable Development Perspective’, in WABE International Symposium on Cement and Concrete, March 30-31, Montréal, Canada, pp. 85-110.
66. Nkinamubanzi, P.C., Baalbaki, M., Bickley, J. and Aïtcin, P.-C. (1998), ‘Slag for HPC’, World Cement, Vol. 29, No. 10, pp. 97-103.
67. Papadakis, M. and Venuat, M. (1968), Fabrication et Utilisation des Liants Hydrauliques, 2nd edition (self-published).
68. Powers, T.C. (1958), ‘Structure and Physical Properties of Hardened Portland Cement Paste’, Journal of the American Ceramic Society, Vol. 4, No. 1, pp. 1-6.
69. Scheubel, B. and Nachtwey, W. (1997), ‘Development of Cement Technology and its Influence on the Refractory Kiln Lining’, in Refra Kolloquium, Refrateknik GmbH, Berlin and Gottingen, pp. 25-43.
70. Tagnit-Hamou, A. (2008), Personal communication.
71. Tagnit-Hamou, A. and Laldji, S. (2004), Development of a New Binder Using Thermally-treated Spent Pot Liners from Aluminium Smelters, American Concrete Institute, Farmington Hills, MI, SP 219, pp. 145-159.
72. Tennis, P.D. (1999), ‘Portland Cement Characteristics -1998’, Concrete Technology Today, Vol. 20, No. 2, I-3.
73. Venuat, M. (1984), Adjuvants et Traitements, Techniques d’Amélioration des Ouvrages en Béton. Published by the author, 830 p.
74. Aïtcin, P.-C. (1999), ‘Does Concrete Shrink or Does it Swell?’ Concrete International, Vol. 21, No. 12, pp. 77-80.
75. Bentz, D.P. and Snyder, K.A. (1999), ‘Protected Paste Volume in Concrete: Extension to Internal Curing Using Saturated Lightweight Fine Aggregates’, Cement and Concrete Research, Vol. 29, pp. 1863-1867.
76. Klieger, P. (1957), ‘Early High-strength Concrete for Prestressing’, in Proceedings of a World Conference on Prestressed Concrete, San Francisco, pp. A5(1-14). Kosmatka, S.H., Kerkoff, B., Panarese, W.C., McLeod, N.F. and McGrath, R.J. (2002), Design and Control of Concrete Mixtures, 7th edition, Cement Association of Canada, Ottawa, Canada, 368 p.
77. Kovler, K. and Jensen, O.M. (2005), ‘Novel Technique for Concrete Curing’, ACI Concrete International, Vol. 27, No. 9, pp. 39-42.
78. Le Chatelier, H. (1904), Recherches Expérimentales sur la Constitution des Mortiers Hydrauliques, Dunod, Paris.
79. Mather, B. (2001), ‘Self-Curing Concrete, Why Not?’ Concrete International, Vol. 23, No. 1, pp. 46-47.
80. Mindess, S., Young, J.F. and Darwin. D. (2003), Concrete, 2nd edition, Prentice-Hall, Upper Saddle River, New Jersey, 2003, 644 p.
81. Aïtcin, P.-C. (1998), High-Performance Concrete, E and FN Spon, London, 591 p. Bédard, C. (2005), Superplasticizer/Cement/Supplementary Cementitious Materials Interactions, PhD Thesis No. 1570 (in French), Université de Sherbrooke, Quebec, Canada.
82. Bensted, J. and Barnes, P. (2002), Structure and Performance of Cements, 2nd edition, Spon Press, Taylor and Francis, London, 565 p.
83. Dodson, V. (1990), Concrete Admixtures, Van Nostrand Reinhold, New York, 211 p.
84. Jolicoeur, C., Nkinamubanzi, P.-C., Simard, M.-A. and Amd Piotte, M. (1994), ‘Progress in Understanding the Fundamental Properties of Superplasticizers in Fresh Concrete’, in ACI SP-148, American Concrete Institute, Farmington Hills, Michigan, pp. 63-88.
85. Kim, B.-G. (2000), Compatibility between Cements and Superplasticizers in High-Performance Concrete: Influence of Alkali Content in Cement and of the Molecular Weight ofPNS on the Properties of Cement Pastes and Concrete, PhD Thesis (in English), Université de Sherbrooke, Quebec, Canada.
86. Ohta, A., Sugiyama, T. and Momoto, T. (2000), ‘Study of Dispersing Effects of Polycarboxylate -Based Dispersant on Fine Particles’, in ACI SP-195, American Concrete Institute, Farmington Hills, Michigan, pp. 211-228.
87. Rixom, R. and Mailvaganam, N.P. (1999), Chemical Admixtures for Concrete, E and FN Spon, London, 437 p.
88. Roberts, L.R. and Taylor, P.C. (2007), ‘Understanding Cement - SCM - Admixture Interaction Issues’, Concrete intrnational, Vol. 29, No. 1, pp. 33-41.
89. Saric-Coric, M. (2001), Superplasticizer/Cement//Slag Interactions - Concrete Properties, PhD Thesis No. 1349 (in French), Université de Sherbrooke, Quebec, Canada.
90. Spiratos, N., Pagé, M., Mailvaganam, N.P., Malhotra, V.M. and Jolicoeur, C. (2003), Superplasticizers for Concrete, Supplemetary Cementing Materials for Sustainable Development Inc., Ottawa, Canada, 322 p.
91. Aïtcin, P.-C. (1971), ‘Density and Porosity of Solids’, ASTM Journal of Materials, Vol. 6, No. 2, pp. 282–294.
92. Aïtcin, P.-C. (1998), High Performance Concrete, E and FN Spon, London, 591 p.
93. Aïtcin, P.-C. and Mehta, P.K. (1990), ‘Effect of Coarse Aggregate Characteristics on Mechanical Properties of High-strength Concrete’, ACI Materials Journal, Vol. 87, No. 2, pp. 103-107.
94. Aldred, J. (2010), Private communication.
95. Alexander, M.G. and Mindess, S. (2005), Aggregates in Concrete, Taylor & Francis, London and New York, 435 p.
96. Asselanis, J., Aïtcin, P.-C. and Mehta, P.K. (1989), ‘Influence of Curing Conditions on the Compressive Strength and Elastic Modulus of Very High-strength Concrete’, Cement, Concrete and Aggregates, No. 2, Summer, pp. 80-83.
97. Baalbaki, W.H. (1997), Experimental and Forward Looking Analysis of the Elastic Modulus of Concrete, PhD Thesis, No. 1015 (in French), Université de Sherbrooke, Sherbrooke, Quebec.
98. Baalbaki, W., Benmokrane, B., Chaalal, O. and Aïtcin, P.-C. (1991), ‘Influence of Coarse Aggregate on Elastic Properties of High Performance Concrete’, ACI Materials Journal, Vol. 88, No. 5, pp. 499-503.
99. Duran-Herrera, S.A., Bonneau, O., Petrov, N., Khayat, K.H. and Aïtcin, P.-C. (2008), Autogenous Control of Autogenous Shrinkage, ACI SP-256, American Concrete Institute, Farmington Hills, Michigan, pp. 1-12.
100. Houpert, R. (1979), Le Comportement à la Rupture des Roches, in Proceedings of an International Conference on Rock Mechanics, Montreux, Switzerland, Balkema, Rotterdam, Vol. 3, pp. 107-114.
101. Khayat, K.H., Bickley, J. and Hooton, A.D. (1995), “High-strength Concrete Properties Derived from Compressive Strength Values’, Cement, Concrete and Aggregates, Vol. 17, No. 2, pp. 126-133.
102. Klieger, P. (1957), ‘Early High-strength Concrete for Prestressing’, Proceedings of a World Conference on Prestressed Concrete, San Francisco, USA, pp. A5(1)-A5(14).
103. Kosmatka, S.H., Kerkoff, B., Panarese, W.C., McLeod, N.E. and McGrath, R.J. (2002), Design and Control of Concrete Mixtures, 7th edition, Cement Association of Canada, Ottawa, Canada, 368 p.
104. Nielsen, A.V. and Aïtcin, P.-C. (1992), ‘Properties of High-strength Concrete Containing Light, Normal and Heavyweight Aggregate’, Cement, Concrete and Aggregates, Vol. 14, No. 1, pp. 8-12.
105. Roberts, J.W. (2004), ‘Internal Curing in Pavements, Bridge Decks and Parking Structures Using Absorptive Aggregate to Provide Water to Hydrate Cement not Hydrated by Mixing Water’, TRB Committee A 2E05, Concrete Materials and Placement Technique, 83rd TRB Annual Meeting, Washington, USA, 21 p.
106. Villareal, V.H. and Crocker, D.A. (2007), ‘Taking Lightweight Aggregate to the Streets’, Concrete International, Vol. 29, No. 2, pp. 32-36.
107. Watanabe, S., Masuda, Y., Jimmai, H., Kwoiwa, S. and Namiki, S. (2008), ‘Development and Application of Quality Control System Based on Careful Selection of Coarse Aggregate for High Strength Concrete’, in V. Bilek and Z. Kersner (eds), 3rd Symposium on Non-traditional Cement and Concrete, Brno, Czech Republic, pp. 793-802.
108. Weber, S. and Reinhardt, H.W. (1997), ‘A New Generation of High-performance Concrete: Concrete with Autogenous Curing’, Advanced Cement Based Materials, No. 6, pp. 59-98.
109. Aggarwal, P., Aggarwal, Y. and Gupta, S.M. (2007), ‘Effect of Bottom Ash as Replacement of Fine Aggregates in Concrete’, Asian Journal of Civil Engineering (Building and Housing), Vol. 8, No. 1, pp. 49-62.
110. Alexander, M. and Mindess, S. (2005), Aggregates in Concrete, Taylor & Francis, London and New York, 435 p.
111. Andrade, L.B., Rocha, J.C. and Cheriaf, M. (2007), ‘Evaluation of Concrete Incorporating Bottom Ash as a Natural Aggregates Replacement’, Waste Management, Vol. 27, pp. 1190-1199.
112. BS EN 8500-2: 2002 (2002), Concrete - Complementary British Standard to BS EN 206-1: Specification for Constituent Materials and Concrete, British Standards Institution, London.
113. Deshpande, Y., Hiller, J.E. and Shorkey, C.J. (2009), ‘Volumetric Stability of Concrete Using Recycled Concrete Aggregates’, in A.M. Brandt, J. Olek and I.H. Marshall (eds), Proceedings of an International Symposium on Brittle matrix Composites 9, Warsaw, October 25-28, IFTR and Woodhead Publishing Limited, Warsaw, pp. 301-311.
114. Dhir, R., Paine, K., Dyer, T. and Tang, A. (2004), ‘Value-added Recycling of Domestic, Industrial and Construction Waste Arising as Concrete Aggregate’, Concrete Engineering International, Vol. 8, No. 1, pp. 43-48.
115. El-Dieb, A.S., Abdel-Wahab, M.M. and Abdel-Hameed, M.E. (2001), Concrete Using Tire Rubber Particles as Aggregate’, in R.K. Dhir, M.C. Limbachiya and K.A. Paine (eds), Recycling and Use of Used Tyres, Thomas Telford, London, pp. 251-259.
116. Eldin, N.N. and Senouci, A.B. (1993), ‘Tire Rubber Particles as Concrete Aggregate’, ASCE Journal of Materials in Civil Engineering, Vol. 5, No. 4, pp. 478-498. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Fournier, B. and Foo, S. (2007-2008), ‘Recycled Aggregate Concrete as a Structural Material’, Canadian Civil Engineer, Vol. 24, No. 5, pp. 20-23.
117. Hansen, T.C. (ed) (1990), Recycling of Demolished Concrete and Masonry, RILEM Report No. 6, Chapman and Hall, London.
118. Jin, W., Meyer, C. and Baxter, S. (2000), ‘“Glascrete” - Concrete with Glass Aggregate’, ACI Materials Journal, Vol. 97, No. 2, pp. 208-213.
119. Johnston, C.D. (1974), ‘Waste Glass as Coarse Aggregate for Concrete’, Journal of Testing and Evaluation, Vol. 2, No. 5, pp. 344-350.
120. Liang, H., Zhu, H. and Byars, E.A. (2007), ‘Use of Waste Glass as Aggregate in Concrete’, in 7th UK CARE Annual General Meeting, September 15th, UK Chinese Association of Resources and Environment, Greenwich, London, UK, 7 p.
121. Meyer, C. (2003), ‘Glass Concrete’, ACI Concrete International, Vol. 25, No. 6, pp. 55-58.
122. Meyer, C. (2008), ‘Recycled materials in concrete’, in S. Mindess (ed), Developments in the Formulation and Reinforcement of Concrete, Woodhead Publishing Limited, Cambridge, UK, pp. 208-230.
123. Moulinier, F., Lane, S. and Dunster, A. (2006), ‘The Use of Glass as Aggregate in Concrete’, in The Waste and Resource Action Programme, Oxford, UK, 21 p.
124. Obla, K., Kim, H. and Lobo, C. (2007), Crushed Returned Concrete as Aggregates for New Concrete, RMC Research & Education Foundation, 44 p.
125. Park, S.B., Lee, B.C. and Kim, J.H. (2004), ‘Studies on Mechanical Properties of Concrete Containing Waste Glass Aggregate’, Cement and Concrete Research, Vol. 34, No. 12, pp. 2181-2189.
126. Pera, J., Coutaz, L., Ambroise, J. and Chababbet, M. (1997), ‘Use of Incinerator Bottom Ash in Concrete’, Cement and Concrete Research, Vol. 27, No. 1, pp. 1-5.
127. Phillips, J.C. and Chan, D.S. (1972), ‘Refuse Glass Aggregate in Portland Cement Concrete’, in M.A. Schwartz (ed), Proceedings of the 3rd Mineral Waste Utilization Symposium, Chicago, U.S. Bureau of Mines and IIT Research Institute.
128. Poon, C.-S. and Chan, D. (2005), ‘Influence of Contaminations Levels in Recycled Concrete Aggregates on the Properties of Concrete Products’, in N. Banthia, T. Uomoto, A. Bentur and S.P. Shah (eds), Construction Materials, Proceedings of ConMat’05 and Mindess Symposium, Vancouver, University of British Columbia, Vancouver, CD-ROM.
129. Sakai, K. (2007), ‘Contributions of the Concrete Industry Toward Sustainable Development’, in Y.M. Chun, P. Claisse, T.R. Naik and E. Ganjian (eds), Sustainable Construction Materials and Technologies, Taylor & Francis, London, pp. 1-10.
130. Skripkiunas, G., Grinys, A. and Cernius, B. (2007), ‘Deformation Properties of Concrete with Rubber Waste Additives’, Materials Science (Medziagotyra), Vol. 13, No. 3, pp. 219-223.
131. Taha, M.M.R., Abdel-Wahab, M.M. and El-Dieb, A.S. (2005), ‘Rubber Concrete: a New Addition to Polymer Concrete’, in N. Banthia, T. Uomoto, A. Bentur and S.P. Shah (eds), Construction Materials, Proceedings of ConMat’05 and Mindess Symposium, Vancouver, University of British Columbia, Vancouver, CD-ROM.
132. Topçu, I.B. and Bilir, T. (2010), ‘Effect of Bottom Ash as Fine Aggregate on Shrinkage Cracking of Mortars’, ACI Materials Journal, Vol. 107, No. 1, pp. 48-56.
133. Turatsinze, A., Bonnet, S. and Granju, J.-L. (2006), ‘Positive Synergy Between Steel-fibres and Rubber Aggregates: Effect on the Resistance of Cement-based Mortars to Shrinkage Cracking’, Cement and Concrete Research, Vol. 36, No. 9, pp. 1692-1697.
134. Turatsinze, A., Bonnet, S. and Granju, J.-L. (2007), ‘Potential of Rubber Aggregates to Modify Properties of Cement-based Mortars: Improvement in Cracking Shrinkage Resistance’, Construction and Building Materials, Vol. 21, No. 1, pp. 176-181.
135. Xi, Y., Li, Y., Xie, Z. and Lee, J.S. (2004), ‘Utilization of Solid Wastes (Waste Glass and Rubber Particles) as Aggregates in Concrete’, in K. Wang (ed), Proceedings of an International Workshop on Sustainable Development and Concrete Technology, May 20-21, Beijing, China, Iowa State University, Ames, Iowa, pp. 45-54.
136. Zega, C.J., Villagran-Zaccardi, Y.A. and Di Maio, A.A. (2010), ‘Effect of Natural Coarse Aggregate Type on the Physical and Mechanical Properties of Recycled Coarse Aggregate’, Materials and Structures (RILEM), Vol. 43, Nos. 1-2, pp. 195-202.
137. Aïtcin, P.-C. (1998), High Performance Concrete, E & FN Spon, London, UK, 591 p. Aïtcin, P.-C., Pigeon, M., Pleau, R. and Gagné R. (1998), ‘Freezing and Thawing Durability of High-Performance Concrete’, International Symposium on High-Performance Concrete and Reactive Powder Concrete, Sherbrooke, Vol. 4, pp. 383-392.
138. Dodson, V. (1990), Concrete Admixtures, Van Nostrand Reinhold, New York, 211 p.
139. Jolicoeur, C., Cong To, TC., Benoît, E., Hill, R., Zhang, Z. and Page, M. (2009), ‘Fly-ash Carbon Effects on Concrete Air Entrainment: Fundamental Studies on Their Origin and Chemical Mitigation’, World of Coal Ash (WOCA) Conference, May 4-7, Lexington, Kentucky, USA, 23 p. Available at http://www.flyash.info/
140. Kosmatka, S.H., Kerkoff, B., Panarase, W.C., Macleod, N.F. and Machrath, J. (2002), Design and Control of Concrete Mixtures, seventh Canadian edition, Cement Association of Canada, Ottawa, Canada, 356 p.
141. Neville, A.M. (1995), Properties of Concrete, 4th edition, Pitman, London, 844 p.
142. Pigeon, M. and Pleau, R. (1995), Durability of Concrete in Cold Climates, E and FN Spon, New York, 244 p.
143. Raphael, S., Sarkar, S. and Aïtcin, P.-C. (1989), ‘Alkali-Aggregate Reactivity - Is it Always Harmful?’ Proceedings of the VUIth International Conference on Alkali-Aggregate Reaction, Kyoto, Japan, pp. 809-814.
144. Rixom, M.R. and Mailvaganam, N.P. (1999), Chemical Admixtures for Concrete, 3rd edition, E and FN Spon, London, 437 p.
145. Whiting, D.A. and Nagi, M.A. (1998), Manual on Control of Air Content in Concrete, PCA R8D Serial No. 2093, Cement Association, Skokie, IL, USA, 42 p.
146. Aïtcin, P.-C. (1998), High Performance Concrete, E and FN Spon, London, 591p.
147. Aïtcin, P.-C. (1999), ‘The Volumetric Changes of Concrete or does Concrete Shrink or does it Swell?’ Concrete International, Vol. 21, No. 12, pp. 77-80.
148. Bensted, J. (2001), ‘Cement Science - Is it Simple?’ Cement Wapno Beton Vol. 1, pp. 6-19.
149. Bensted, J. (2005), ‘Why Gypsum Quality is Important for Portland Cements?’ Cement Wapno Beton, Vol. 4, pp. 183-203.
150. Bentz, D.P. and Stutzman, P.E. (2006), ‘Curing, Hydration and Microstructure of Cement Paste’, ACI Materials Journal, Vol. 103, No. 5, pp. 348-356.
151. Bentz, D.P. and Aïtcin, P.-C. (2008), ‘The Hidden Meaning of the Water-to-Cement Ratio’, Concrete International, Vol. 30, No. 5, pp. 51-54.
152. Cook, W.D., Miao, B., Aïtcin, P.-C. and Mitchell, D. (1992), ‘Thermal Stresses in Large High Strength Concrete Columns’, ACI Materials Journal, Vol. 89, No. 1, pp. 61-68.
153. Davis, H.E. (1940), ‘Autogenous Volume Changes of Concrete’, 43rd Annual General Meeting of ASTM, Vol. 40, pp. 103-112.
154. Duran-Herrera, A., Petrov, N., Bonneau, O., Aïtcin, P.-C. and Khayat, K.H. (2008), Autogenous Control of Autogenous Shrinkage, ACI SP 256, American Concrete Institute, Farmington Hills, Michigan, pp. 1-12.
155. Gartner, E.M., Young, J.F., Damidot, D.A. and Jawed, I. (2002), ‘Hydration of Portland Cement’, in Bensted, J. and Barnes, P. (eds), Structure and Performance of Cements, 2nd edition, Spon Press, London, pp. 57-113.
156. Jensen, O. and Hansen, E. (2001), ‘A Model for the Microstructure of Calcium Silicate Hydrate in Cement Paste’, Cement and Concrete Research, Vol. 30, No. 1, pp. 101-116.
157. Lachemi, M. and Elimov, R. (2007), ‘Numerical Modeling of Slipforming Operations’, Computers and Concrete, Vol. 4, No. 1, pp. 33-47.
158. Le Chatelier, H. (1904), Recherches Expérimentales sur la Constitution des Mortiers Hydrauliques, Dunod, Paris.
159. Lynam, C.G. (1934), Growth and Movement in Portland Cement Concrete, Oxford University Press, London.
160. Neville, A.M. (1995), Properties of Concrete, 4th edition, Prentice Hall, 844 p.
161. Nonat, A. (2005), ‘The Structure of C-S-H’, Cement Wapno Beton, Vol. 2, pp. 65-73.
162. Powers, T.C. (1947), ‘A Discussion of Cement Hydration in Relation to the Curing of Concrete’, Proceedings of the Highway Research Board, Vol. 27, pp. 178-188.
163. Slaich, J. (1987), ‘Quality and Economy, Concrete Structure for the Future’, Proceedings oflABSE Symposium, Versailles, France, IABSE-AIPC-IVBH, Zurich, pp. 31-40.
164. Vernet, C. (2007). Personal communication.
165. Acker, P., Torrenti, J.-M. and Ulm, F. (2004), ‘Comportement Différé du Béton au Jeune Age’, Traité Mécanique et Ingénierie des Matériaux, Hermés, Paris.
166. Aïtcin, P.-C. (1999a), ‘Does Concrete Shrink or Does it Swell?’ Concrete International, Vol. 21, No. 12, pp. 77-80.
167. Aïtcin, P.-C. (1999b), ‘Demystifying Autogenous Shrinkage’, Concrete International, Vol. 21, No. 11, pp. 54-56.
168. Aïtcin, P.-C. (2008), Binders for Durable and Sustainable Concrete, Taylor and Francis, London, UK, 500 p.
169. Aïtcin, P.-C., Neville, A.M. and Acker, P. (1997) ‘Integrated View of Shrinkage Deformation’, Concrete International, Vol. 19, No. 9, pp. 35-41.
170. Barcelo, L., Boivin, S., Acker, P., Toupin, J. and Durand, B. (2001), ‘Early Age Shrinkage of Concrete: Back to Physical Mechanism’, Concrete Science and Engineering, Vol. 3, No. 10, pp. 85-91.
171. Bentz, D.P. and Peltz, M.A. (2008), ‘Thermal and Autogenous Shrinkage Contributing to Early-Age Cracking’, ACI Journal of Materials, Vol. 105, No. 4, pp. 414-420.
172. Bentz, D., Halleck, P.M., Grader, A.S. and Roberts, J.W. (2006), ‘Water Movement During Internal Curing’, Concrete International, Vol. 28, No. 10, pp. 39-45. Collepardi, M., Borsoi, A., Collepardi, S., Ogoumah Olayat, J.J. and Troli, R. (2005), ‘Effects of Shrinkage Reducing Admixtures in Shrinkage Compensating Concrete under Non-Wet Conditions’, Cement and Concrete Composites, Vol. 27, pp. 704-708.
173. Davis, R.E. (1930), ‘A Summary of the Results of Investigations Having to do with Volumetric Changes in Cements, Mortars and Concretes, Due to Causes Other than Stress’, Journal of the American Concrete Institute, Vol. 26, pp. 407-443.
174. Duran-Herrera, A., Aïtcin, P.-C. and Petrov, N. (2007) ‘Effect of Saturated Lightweight Sand Substitution on Shrinkage in a 0.35 w/b Concrete’, ACI Materials Journal, Vol. 104, No. 1, pp. 48-52.
175. Duran-Herrera, A., Petrov, N., Bonneau, O., Khayat, K. and Aïtcin, P.-C. (2008), Autogenous Control of Autogenous Shrinkage, ACI SP 256, American Concrete Institute, Farmington Hills, Michigan, pp. 1-12.
176. Jensen, O.M. and Hansen, P.F. (2001), ‘Water-Entrained Cement-Based Materials: I. Principles and Theoretical Background’, Cement and Concrete Research, Vol. 31, No. 4, pp. 647-654.
177. Jensen, O.M. and Hansen, P.F. (2002), ‘Water-Entrained Cement-Based Materials: II. Experimental Observations’, Cement and Concrete Research, Vol. 32, No. 6, pp. 973-978.
178. Kada, H., Lachemi, M., Petrov, N., Bonneau, O. and Aïtcin, P.-C. (2002), Determination of the Coefficient of Thermal Expansion of High-Performance Concrete from Initial Setting’, Materials and Structures, Vol. 35, No. 245, pp. 35-41.
179. Klieger, P. (1957), ‘Early High-Strength Concrete for Pre-stressing’, Proceedings of the World Conference on Pre-stressed Concrete, San Francisco, pp. A5(1)-A5(14).
180. Kovler, K. and Jensen, O.M. (2005), ‘Novel Technique for Concrete Curing’, Concrete International, Vol. 27, No. 9, pp. 39-42.
181. Lura, P., Jensen, O.M. and van Breugel, K. (2002), ‘Autogenous Shrinkage in High-Performance Cement Paste: An Evaluation of Basic Mechanisms’, Cement and Concrete Research, Vol. 33, No. 2, pp. 223-232.
182. Lynam, C.G. (1934), Growth and Movement in Portland Cement Concrete, Oxford University Press, London, 139 p.
183. Malhotra, V.M. and Mehta, P.K. (2008), High-Performance Fly Ash Concrete, Supplementary Cementing Materials for Sustainable Development Inc. Ottawa, Canada, 142 p.
184. Maltese, C., Pistolesi, C., Lolli, A., Cerulli, T. and Salvion, D. (2005), ‘Combined Effect of Expansive and Shrinkage Reducing Admixtures to Obtain Stable and Durable Mortars’, Cement and Concrete Research, Vol. 35, pp. 2244-2251.
185. Mechtcherine, V., Dudziak, L. and Schulze, J. (2006), ‘Internal Curing by Super-absorbant Polymers (SAP). Effects on Material Properties of Self-Compacting Fibre-Reinforced High Performance Concrete’, in O.M. Jensen, P. Lura and K. Kovler (eds), Proceedings of the International RILEM Conference, Volume Changes of Hardening Concrete: Testing and Mitigation, RILEM Publications S.A.R.L., pp. 87-96.
186. Mihashi, H. and de B. Leite, J.P. (2004), ‘State-of-the-Art Report on Control of Cracking in Early Age Concrete’, Journal of Advanced Technology (Japan Concrete Institute), Vol. 2, No. 2, pp. 141-154.
187. Morin, R., Haddad, G. and Aïtcin, P.-C. (2002), ‘Crack-Free High Performance Concrete Structures’, Concrete International, Vol. 24, No. 9, pp. 51-56.
188. Nagataki, S. and Goni, H. (1998), ‘Expansive Admixtures (Mainly Ettringite)’, Cement and Concrete Composites, No. 20, pp. 704-708.
189. Neville, A.M. (1995), Properties of Concrete, 4th edition, Longman, 884 p.
190. Ollivier, J.P. and Vichot, A. (2008), La Durabilité des Bétons, Presses de l’Ecole Nationale des Ponts et Chaussées, Paris, 868 p.
191. Pons, G. and Torrenti, J.-M. (2008), ‘Shrinkage and Creep’ (in French), in J.-P. Ollivier and V. Vichot (eds), La Durabilité des Bétons, les Presses de l’école nationale des Ponts et Chaussées, Paris, pp. 167-216.
192. Tazawa, E.I. (2000), ‘Unit Process of Shrinkage Behaviour Based on Dynamic Analysis of Cement Paste in Different Maturity’, Personal communication.
193. Villarreal, V.H. and Crocker, D.A. (2007), ‘Better Pavement through Internal Hydration’, Concrete International, Vol. 29, No. 2, pp. 32-36.
194. Weber, S. and Reinhardt, H.W. (1997), ‘A New Generation of High-Performance Concrete: Concrete with Autogenous Curing’, Advanced Cement Based Materials, Vol. 6, No. 2, pp. 59-68.
195. Bentur, A. (2006), ‘Durability Design of Concrete Cover: The Knowing-Doing Gap’, in J. Skalny, S. Mindess and A. Boyd (eds), Concrete Technology - Materials Science of Concrete, The American Ceramic Society, pp. 11-19.
196. Bentz, D.P. (2007), ‘Internal Curing of High-Performance Concrete Blended Cement Mortars’, ACI Materials Journal, Vol. 104, No. 4, pp. 408-414.
197. Bentz, D.P. and Aitcin, P.-C. (2008), ‘The Hidden Meaning of the Water-to-Cement Ratio’, Concrete International, Vol. 30, No. 5, pp. 51-54.
198. Bentz, D.H., Halleck, M., Grader, A.S. and Roberts, J.W. (2006), ‘Water Movements During Internal Curing’, Concrete International, Vol. 28, No. 10, pp. 61-67.
199. Collepardi, M., Borsoi, A., Collepardi, S., Ogoumah Olayat, J.S. and Troli, R. (2005), ‘Effects of Shrinkage Reducing Admixtures in Shrinkage Compensating Concrete under Non-Wet Conditions’, Cement and Concrete Composites, Vol. 27, pp. 704-708.
200. Cusson, D. and Hoogeveen, T. (2008), ‘Internal Curing of High-Performance Concrete with Pre-soaked Lightweight Aggregate Sand for Prevention of Autogenous Shrinkage Cracking’, Cement and Concrete Research, Vol. 38, No. 6, pp. 757-765.
201. Duran-Herrera, A., Aïtcin, P.-C. and Petrov, N. (2007), ‘Effect of Saturated Lightweight Sand Substitution on Shrinkage in a 0.35 w/b Concrete’, ACI Materials Journal, Vol. 104, No. 1, pp. 48-52.
202. Duran-Herrera, A., Petrov, N., Bonneau, O., Khayat, K. and Aïtcin, P.-C. (2008), Autogenous Control of Autogenous Shrinkage, ACI SP 256, American Concrete Institute, Farmington Hills, Michigan, pp. 1-12.
203. Gonnerman, H.F. (1930), ‘Study of Methods of Curing Concrete’, Journal of the American Concrete Institute, Vol. 26, pp. 359-396.
204. Hoff, G. and Elimov, R. (1995), ‘Concrete Production for the Hibernia Platform’, Supplementary Papers, Second CANMET/ACI International Symposium on Advances in Concrete Technology, Las Vegas, pp. 717-39.
205. Jensen, O.M. and Hansen, H.W. (2001), ‘Water-Entrained Cement Based Materials: Principles and Theoretical Background’, Cement and Concrete Research, Vol. 31, No. 4, pp. 647-654.
206. Kovler, K. and Jensen, O.M. (2005), ‘Novel Technique for Concrete Curing’, ACI Concrete International, Vol. 27, No. 9, pp. 39-42.
207. Kreijger, P.-C. (1987), ‘The “Skin” of Concrete - Research Needs’, Magazine of Concrete Research, Vol. 39, No. 140, pp. 122-123.
208. Meeks, K.W. and Carino, N.J. (1999), ‘Curing of High-Performance Concrete: Report of the State-of-the-Art’, NISTIR G29S, National Institute of Standards and Technology, Gaithersburg, MD, USA, pp. 1-7.
209. Metchtcherine, V., Dudziak, L. and Schulze, J. (2006), ‘Internal Curing by Super Absorbent Polymers (SAP), Effect of Materials Properties of Self Compacting Fibre Reinforced High-Performance Concrete’, in O.M. Jensen, P. Lura and K. Kovle (eds), Proceedings of the International RILEM Conference: Volume Changes of Hardening Concrete: Testing and Mitigation, RILEM Publications, S.A.R.L. pp. 87-96.
210. Morin, R., Haddad, G. and Aïtcin, P.-C. (2002), ‘Crack-Free High Performance Concrete Structures’, Concrete International, Vol. 24, No. 9, pp. 51-56.
211. Nagataki, S. and Goni, H. (1998), ‘Expansive Admixtures (Mainly Ettringite)’, Cement and Concrete Composites, No. 20, pp. 704-708.
212. Villarreal, V.H. and Crocker, D.A. (2007), ‘Better Pavements Through Internal Hydration’, Concrete International, Vol. 29, No. 2, pp. 32-36.
213. Weber, S. and Reinhardt, H.W. (1997), ‘A New Generation of High-Performance Concrete: Concrete with Autogenous Curing’, Advanced Cement Based Materials, No. 6, pp. 59-68.
214. Aïtcin, P.-C. (1998), High Performance Concrete, E and FN Spon, London, 591 p. Aïtcin, P.-C. (2009), ‘Insulated Forms: Why and Why Now?’ ACI Fall Convention, New Orleans, 12 p.
215. Aïtcin, P.-C. and Mehta, P.K. (1990), ‘Effect of Coarse Aggregate Characteristics on Mechanical Properties of High-Strength Concrete’, ACI Materials Journal, Vol. 89, No. 2, pp. 103-107.
216. Aïtcin, P.-C., Neville, A.M. and Acker, P. (1997), ‘Integrated View of Shrinkage Deformation’, Concrete International, Vol. 19, No. 9, pp. 35-41.
217. City of Montreal (2005), High Performance Concrete (HPC) Compressive Strength of 50 MPa or More, Standard Technical Specification 3VM-20, City of Montreal Department of Public Works, Transportation and Environment, Division Laboratories, 18 p.
218. Collepardi, M., Borsoi, A., Collepardi, S., Ogoumah Olagat, J.J. and Troli, R. (2005), ‘Effects of Shrinkage Reducing Admixtures in Shrinkage Compensating Concrete under Non-wet Conditions’, Cement and Concrete Composites, Vol. 27, pp. 704-708.
219. Kosmatka, S.H., Kerkhoff, B., Panarese, W., MacLeod, N.F. and McGrath, R. (2004), Design and Control of Concrete Mixtures, EB101, 7th edition, Cement Association of Canada, Ottawa, Ontario, Canada, 368 p.
220. Kovler, K. and Jensen, O.M. (2007), State of the Art Report: Internal Curing of Concrete, RILEM Technical Committee 196-ICC, RILEM Publications S.a.r.l. Bayeux, France, 140 p.
221. Kreijger, P.-C. (1987) ‘The “Skins” of Concrete - Research Needs’, Magazine of Concrete Research, Vol. 3, September, pp. 122-123.
222. Lachemi, M. and Elimov, R. (2007), ‘Numerical Modeling of Slip-forming Operations’, Computers and Concrete, Vol. 4, No. 1, pp. 33-47.
223. Morin, R., Haddad, G. and Aïtcin, P.-C. (2002), ‘Crack-free High Performance Concrete Structures’, Concrete International, Vol. 24, No. 9, pp. 51-56. Nagataki, S. and Gomi, H. (1998), ‘Expansive Admixtures (Mainly Ettringite)’, Cement and Concrete Composites, Vol. 20, pp. 163-170.
224. Nielsen, A.V. and Aïtcin, P.-C. (1992), ‘Properties of High-Strength Concrete Containing Light, Normal and Heavyweight Aggregate’, Cement, Concrete and Aggregates, Vol. 14, No. 1, pp. 8-12.
225. Villarreal, V.H. and Crocker, D.A. (2007),’Better Pavements through Internal Hydration’, Concrete International, Vol. 29, No. 2, pp. 32-36.
226. Bickley, J., Hooton, R.D. and Hover, K.C.(2006), Preparation of a Performance-based Specification for Cast-In-Place Concrete, RMC Research Foundation, Silver Spring, Maryland.
227. Canadian Standard CSA A23.1 and A23.2 (2004), Concrete Materials and Methods of Concrete Construction, Canadian Standards Association, Toronto, Ontario, Canada.
228. Godfrey, K.A., Jr (1987), ‘Concrete Strength Record Jumps 36%’, Civil Engineering (ASCE), Vol. 57, No. 11, pp. 84-88.
229. Hooton, R.D. and Weir, A. (2010), ‘Green Concrete Goes for the Gold at 2010 Winter Olympics’, Concrete International, Vol. 32, No. 2, pp. 45-48.
230. National Master Specification (2006), Cast-in-place Concrete, Section 03 3 0 00, Public Works & Government Services Canada.
231. Skalny, J., Mindess, S. and Boyd, A. (eds) (2006), ‘Materials Selection and Proportioning for Durability’, Proceedings of the Anna Maria Workshops 2003: Testing and Standards or Concrete Durability, in Materials Science of Concrete: Special Volume on Concrete Technology, The American Ceramic Society, pp. 59-64.
232. Taylor, P. (2004), ‘Performance-Based Specifications for Concrete', Concrete International, Vol. 26, No. 8, pp. 91-93.
233. Weir, A. (2010), Private communication.
234. ACI Standard 214 R-02, Recommended Practice for Evaluation of Strength Test Results of Concrete (re-approved 1997), ACI Manual of Concrete Practice, Part II, pp. 1-20.
235. ASTM Manual series MNL 7A (2002), Manual on Presentation of Data and Control Chart Analysis, 7th edition, ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428.
236. Chung, H.W. (1978), ‘How Good is Good Enough - A Dilemma in Acceptance Testing of Concrete’, ACI Journal, Vol. 75, No. 8, pp. 374-380.
237. Day, K.W. (1995), Concrete Mix Design, Quality Control and Specification, E and FN SPON, London, 350 p.
238. Schrader, E. (2007), ‘Statistical Acceptance Criteria for Strength of Mass Concrete’, Concrete International, Vol. 29, No. 6, pp. 57-61.
239. Valles, M. (1972), Elements d’Analyse Statistique - Application au Contrôle de la Qualité dans l’Industrie du Béton, Monographie No. 4 published by CERIB, Paris, 64 p.