Crystalline Alloys: Magnesium

Environmental Degradation of Advanced and Traditional Engineering Materials

Volumn , Issue , 2013, Pages 21-65

  Shaw, Barbara A ^a   Sikora, Elizabeth ^a  

^a The Center for Nanotechnology Education and Utilization   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85138395879     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b15568-7     Document Type: Chapter

References (115)

1. Aizawa, T., T. Kuji, and H. Nakano. 2001. Non-equilibration of nanostructured Mg2Ni by bulk mechanical alloying, Materials Transactions, 42, 1284-1292.
2. Altun, H. and S. Sen. 2004. Studies on the influence of chloride ion concentration and pH on the corrosion and electrochemical behavior of AZ63 magnesium alloy, Materials and Design, 25, 637-643.
3. Antrekowitsch, H., G. Hanko, and P. Ebner. 2002. Recycling of different types of magnesium scrap, in Proceedings of the Magnesium Technology 2002, TMS, Warrendale, PA, 2002.
4. Ardelean, H., I. Frateur, and P. Marcus. 2008. Corrosion protection of magnesium alloys by cerium, zirco-nium and niobium-based conversion coatings, Corrosion Science, 50, 1907-1918
5. Arlhac, J.M. and J.C. Chaize. 1997. New magnesium alloys and protections in new helicopters, in G.W. Lorimer, Ed., Proceedings of the 3rd International Magnesium Conference, Manchester, U.K., Institute of Materials, London, U.K., pp. 213-230.
6. Arrabal, R., E. Matykina, T. Hashimoto et al. 2002. Characterization of AC PEO coatings on magnesium alloys, Surface and Coatings Technology, 203, 2207-2220.
7. Arrabal, R., E. Matykina, F. Viejo et al. 2009. Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coatings, Corrosion Science, 50, 1744-1752.
8. Arroyave R. and Z.-K. Liu. 2006. Intermetallics in the Mg-Ca-Sn ternary system: Structural, vibrational and thermodynamic properties from first principle, Physical Review B, 74, 174118.
9. ASM Metals Handbook, Vol. 13B. 2005. Cramer, S.D. and B.S. Covino, Jr., Eds., ASM International, Novelty, OH.
10. ASM Specialty Handbook: Mg and Mg Alloys. 1999. Avedesian, M.M. and H. Baker, Eds., ASM International, Novelty, OH.
11. Au, M. 2005. Hydrogen storage properties of magnesium based nanostructured composite materials, Materials Science and Engineering B, 117, 37-44.
12. Ballerini, G., U. Bardi, R. Bignucolo et al. 2005. About some corrosion mechanics of AZ91D magnesium alloy, Corrosion Science, 47, 2173-2184.
13. Barchiche, C.-E., E. Rocca, C. Juers et al. 2007. Corrosion resistance of plasma anodized AZ91D magne-sium alloy by electrochemical methods, Electrochimica Acta, 53, 417-425.
14. Birbilis, N., M.A. Easton, A.D. Sudholz et al. 2009. On the corrosion of binary magnesium-rare earth alloys, Corrosion Science, 51(3), 683-689.
15. Blawert, C., W. Dietzel, E. Ghali, and G. Song. 2006. Anodizing treatments for magnesium alloys and their effect on corrosion resistance in various environments, Advanced Engineering Materials, 8, 511-533.
16. Busk, R.S. 1986. Magnesium Products Design, Marcel Dekker, New York, p. 256.
17. Cao, F.H., J.L. Cao, Z. Zhang et al. 2007. Plasma electrolytic oxidation of AZ91D magnesium alloy with different additives and its corrosion behavior, Materials and Corrosion, 58, 696-703.
18. Chan, W.M., F.T. Cheng, Leung, L.K. et al. 1998. Corrosion behavior of magnesium alloy AZ91 and its MMC in NaCl solution, Corrosion Reviews, 16(1-2), 43-52.
19. Critical Strategic Metals. 2010. http://www.criticalstrategicmetals.com/wp-content/uploads/2010/06/CSM-June_2010.pdf, Accessed August 30, 2010.
20. Cui, X., Q. Li, Y. Li et al. 2008. Microstructure and corrosion resistance of phytic acid conversion coatings for magnesium alloy, Applied Surface Science, 255, 2098-2103.
21. David, E. 2005. An overview of advanced materials for hydrogen storage, Journal of Materials Processing Technology, 162-163, 69-177.
22. Di Mario, C., H. Griffiths, O. Goktekin et al. 2004. Drug-eluting bioabsorbable magnesium stent, Journal of Interventional Cardiology, 17, 391-395.
23. Dodd, S.B. and R.W. Gardiner. 1996. Vapour condensation applied to the development of corrosion resis-tant magnesium, in G.W. Lorimer, Ed., in Proceedings of the 3rd International Magnesium Conference, Manchester, U.K., April 10-12, 1996, The Institute of Materials, London, U.K., 1997, pp. 271-284.
24. Dunlop, G. 2002. Australian RandD on the production and application of magnesium alloys, in H.I. Kaplan, Ed., Proceedings of the Magnesium Technology 2002, TMS, Warrendale, PA.
25. Elektron WE43B, Datasheet: 467A, Magnesium Elektron, Manchester, U.K., www.magnesium-elektron.com/data/downloads/467B%20for%20PC%20111202.pdf (accessed August 16, 2010).
26. Eliezer, D. and H. Alves. 2002. Corrosion and oxidation of magnesium alloys’ in M. Kuts, Ed., Handbook of Materials Selection, pp. 267-291. Wiley and Sons, Inc., New York.
27. Fan, J.M., Q. Li, W. Kang et al. 2009. Composite cerium oxide/titanium oxide thin films for corrosion protection of AZ91D magnesium alloy via sol-gel process, Materials and Corrosion, 60, 438-443.
28. Feliu Jr., S., A. Pardo, M.C. Merino et al. 2009. Correlation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys, Applied Surface Science, 255, 4102-4108.
29. Fichtner, M., J. Engel, O. Fuhr et al. 2004. Nanocrystalline aluminum hydrides for hydrogen storage, Materials Science and Engineering B, 108, 42-47.
30. Frignani, A., V. Grassi, F. Zucchi, and F. Zanotto. 2010. Mono-carboxylate conversion coatings for AZ31 Mg alloy protection, Materials and Corrosion, 62, 995-1002, DOI: 10.1002/maco.200905615, Accessed August 30, 2010.
31. Froes, F.H., Y.-W. Kim, and S. Krishnamurthy. 1989. Rapid solidification of lightweight metal alloys, Materials Science and Engineering A, 117(9), 19-32.
32. Gesing, A.J., N.D. Reade, J.H. Sokolowski et al. 2010. Development of recyclable Mg-based alloys: AZ91D and AZC1231 phase information derived from heating/cooling curve analysis, in Proceedings of the Magnesium Technology 2010, TMS, Warrendale, PA, p. 98.
33. Grey, J.E. and B. Luan. 2002. Protective coatings on magnesium and its alloys-A critical review, Journal of Alloys and Compounds, 336, 88-113.
34. Gu, C., J. Lian, Z. Jiang et al. 2005. Multilayer Ni-P coating for improving the corrosion resistance of AZ91D magnesium alloy, Advanced Engineering Materials, 7, 1032-1036.
35. Hanawalt, J.D., C.E. Nelson, and J.A. Peloubet. 1942. Corrosion studies of magnesium and its alloys, Light Metals, 5, 30-36.
36. Hartwig, A. 2001. Role of magnesium in genomic stability, Mutation Research: Fundamental and Molecular Mechanisms of Mutagenesis, 475, 113-121.
37. Hawke, D.L., J.E. Hillis, M. Pekguleryuz et al. 1999. Corrosion behavior, ' in M.M. Avedesian and H. Baker, Eds., Magnesium and Magnesium Alloys, ASM International, Materials Park, OH, pp. 194-210.
38. Heidersbach, K.L. 1998. An evaluation of the corrosion performance of magnesium-yttrium and yttrium-magnesium nonequilibrium alloys, PhD dissertation, The Pennsylvania State University, University Park, PA.
39. Hillis, J.E. 1983. The effects of heavy metal contamination on magnesium corrosion performance, Light Metal Age, June, pp. 25-29.
40. Huang, C.A., T.H. Wang, T. Weirich, and V. Neubert. 2008. Electrodeposition of a protective copper/nickel deposit on the magnesium alloy AZ31, Corrosion Science, 50, 1385-1890.
41. Hydro Magnesium. 2010. http://www.nanomag.us/Hydro_Mg_Brochure_Corrosion_and_Finishing_of_Mg.pdf, Accessed August 30, 2010.
42. International Magnesium Association. 2010. http://www.intlmag.org/files/yend2009.pdf, Accessed August 30, 2010.
43. Kang, Z., K. Mori, and Y. Oishi. 2005. Surface modification of magnesium alloys using triazine dithiols, Surface and Coatings Technology, 195, 162-167.
44. Kannan, M.B. 2010. Influence of microstructure on the in-vitro degradation behavior of magnesium alloys, Materials Letters, 64, 739-742.
45. Kuji, T., H. Nakano, and T. Aizawa. 2002. Hydrogen absorption and electrochemical properties of Mg2-xNi (x = 0-0.5) alloys prepared by bulk mechanical alloying, Journal of Alloys and Compounds, 330-336, 590-596.
46. Lin, C.S., H.C. Lin, K.M. Lin, and W.C. Lai. 2006. Formation and properties of stannate conversion coat-ings on AZ61 magnesium alloy, Corrosion Science, 48, 93-109.
47. Liu, M., P. Schmutz, P.J. Uggowitzer et al. 2010. The influence of Y on the corrosion behavior of binary M-Y alloys, Corrosion Science, 52(11), 3687-3701.
48. Liu, Y., Z. Wu, S. Zhou, and L. Wu. 2006. Self-assembled monolayers on magnesium alloy surfaces from carboxylate ions, Applied Surface Science, 252, 3818-3827.
49. Lyon, P., T. Wilkis, and I. Syed. 2005. The influence of alloying elements and heat treatment upon the properties on Electron 21 (EV31A) alloy, in Proceedings of the Magnesium Technology 2005, TMS, Warrendale, PA, pp. 303-308.
50. Makar, G.L. and. J. Kruger. 1990. Corrosion studies of rapidly solidified magnesium alloys, Journal of the Electrochemical Society, 137, 414-421.
51. Makar, G.L. and J. Kruger. 1993. Corrosion of magnesium, International Materials Reviews, 38(3), 138-153.
52. Mitovic-Scepanovic, V. and R.J. Brigham. 1992. Localized corrosion initiation on magnesium alloys, Corrosion, 48(9), 780-784.
53. Mordike, B.L. and T. Ebert. 2001. Magnesium properties-applications-potential, Materials Science and Engineering A, 302, 37-45.
54. Mueller, W.D., Lorenzo Fernendez, M. de Mele, M.L. Nascimento, and M. Zeddies. 2009. Degradation of magnesium and its alloys: Dependence on the composition of the synthetic biological media, Journal of Biomedical Materials Research, 90A, 487-495.
55. Mueller, W.D., M.L. Nascimento, L. Fernendez, and M. de Mele. 2010. Critical discussion of the results from different corrosion studies of Mg and Mg alloys for biomedical applications, Acta Biomaterials, 6, 1749-1755.
56. Murray, J., H. Miller, P. Bird et al. 1995. The effect of particle size and surface composition on the reaction rates of some hydrogen storage alloys, Journal of Alloys and Compounds, 231, 841-845.
57. Nakano, S., Sh. Yamaura, S. Uchinashi et al. 2005. Effect of hydrogen on the electrical resistance of melt-spun Mg90Pd10 amorphous alloy, Sensors and Actuators B, 104, 75-79.
58. Nisancioglu, K., O. Lunder, and T.K. Aune. 1990. Corrosion mechanism of AZ91 Mg alloy, in Proceedings of the 47th World Magnesium Association, McLean, VA, 1990, pp. 43-50.
59. Nordlien, J.H., K. Nisanciogu, S. Ono et al. 1996. Morphology and structure of oxide films formed on MgAl alloys by exposure to air and water, Journal of the Electrochemical Society, 143(8), 2564-2572.
60. Nordlien, J.H., K. Nisanciogu, S. Ono et al. 1997. Morphology and structure of water-formed oxides on ternary MgAl alloys, Journal of the Electrochemical Society, 144(2), 461-466.
61. Nordlien, J.H., S. Ono, M. Noburo, and K. Nisancioglu. 1995. Morphology and structure of oxide films formed on Magnesium by exposure to air and water, Journal of the Electrochemical Society, 142(10), 3320-3322.
62. Ozturk K., Y. Zhong, A.A. Lua et al. 2003. Creep resistant Mg-Al-Ca alloys: Computational thermody-namics and experimental investigation, JOM, 55(11), 40-44.
63. Pardo, P., M.C. Merino, P. Casajus et al. 2009. Corrosion behavior of Mg-Al alloys with Al-11Si thermal spray coatings, Materials and Corrosion, 60, 939-948.
64. Pardo, A., M.C. Merino, A.E. Coy et al. 2008. Corrosion behavior of magnesium/aluminum alloys in 3.5wt.% NaCl, Corrosion Science, 50, 823-834.
65. Patzer, G. 2010. The magnesium industry today.the global perspective, in Proceedings of the Magnesium Technology 2010, TMS, Warrendale, PA, pp. 85-90.
66. Petrilli, J.D. 2009. Evaluating the in vitro corrosion behavior and cytotoxicity of vapor deposited magne-sium alloys, MS thesis, The Pennsylvania State University, University Park, PA.
67. Phani, A.R., F.J. Gammel, T. Hack et al. 2005. Enhanced corrosion resistance by sol-gel-based ZrO2-CeO2 coatings on magnesium alloys, Materials and Corrosion, 56, 77-82.
68. Pokhmurska, H., B. Wielage, T. Lampke et al. 2008. Post-treatment of thermal spray coatings on magne-sium, Surface and Coatings Technology, 202, 4515-4524.
69. Polmear, P. 1999. ASM Specialty Handbook on Mg and Mg Alloys, ASM International, Novelty, OH, p. 16.
70. Pourbaix, M. 1974. Atlas of Electrochemical Equilibria in Aqueous Solutions, NACE CEBELCOR, Pergamon Press, New York.
71. Pranevicius, L.L. and D. Milcius. 2005. Synthesis of Mg(AlH4)2 in bilayer Mg/Al thin films under plasma immersion hydrogen ion implantation and thermal desorption processes, Thin Solid Films, 485, 135-140.
72. Rettig, R. and S. Virtanen. 2008. Time-dependent electrochemical characterization of the corrosion of a magnesium rare-earth alloy in simulated body fluids, Journal of Biomedical Materials Research Part A, 85, 167-175.
73. Rettig, R. and S. Virtanen. 2009. Composition of corrosion layers on a magnesium rare-earth alloy in simulated body fluids, Journal of Biomedical Materials Research Part A, 88, 359-369.
74. Riontiono, G., D. Lussana, M. Massazza et al. 2008. Structure evolution of EV31 Mg alloy, Journal of Alloys and Compounds, 463, 200-206.
75. Rojas, P., S. Ordonez, D. Serafini et al. 2005. Microstructural evolution during mechanical alloying of Mg and Ni, Journal of Alloys and Compounds, 391, 267-276.
76. Rudd, A.L., C.B. Breslin, and F. Mansfeld. 2000. The corrosion protection afforded by rare earth conver-sion coatings applied to magnesium, Corrosion Science, 42, 275-288.
77. Rzychon, T., J. Michalska, and K. Kiebus. 2007. Corrosion resistance of Mg-RE-Zr alloys, JAMME, 21(1), 51-54.
78. Shaw, B.A., E. Sikora, and S. Virtanen. 2008. Fix, heal and disappear: A new approach to using metals in the human body, Interface, 17(2), 45-49.
79. Skripnuk, V.M., E. Rabkin, Y. Estrin et al. 2010. The possible route to making magnesium fit for hydro-gen storage in automotive applications, in Proceedings of the Magnesium Technology 2010, TMS, Warrendale, PA.
80. Song, G. 2003. Investigation on corrosion of Mg and its alloys, JCSE, 6, paper C104.
81. Song, G. and A. Atrens. 1999. Corrosion mechanisms of magnesium alloys, Advanced Engineering Materials, 1, 11-33.
82. Song, G. and A. Atrens. 2003. Understanding magnesium corrosion-A framework for improved alloy performance, Advanced Engineering Materials, 5(12), 837-858.
83. Song, G. and A. Atrens. 2007. Recent insights into the mechanism of Magnesium corrosion and research suggestions, Advanced Engineering Materials, 9(3), 177-183.
84. Song, G., S. Hapugpda, D. St. John, and C. Bettles. 2006. Simulation of atmospheric environments for storage and transport of Mg and its alloys, in Proceedings of the Magnesium Technology 2006, TMS, Warrendale, PA, 2006, pp. 3-6.
85. Song, Y.W., D.Y. Shan, and E.H. Han. 2007. Comparative study on corrosion protection properties of electroless Ni-P-ZrO2 and Ni-P coatings on AZ91D magnesium alloy, Materials and Corrosion, 58, 506-510.
86. Song, Y.W., D.Y. Shan, and E.H. Han. 2008. High corrosion resistance of electroless composite plating coatings on AZ91D magnesium alloys, Electrochimica Acta, 53, 2135-2143.
87. Staiger, M.P., A.M. Pietak, J. Huadmai et al. 2006. Magnesium and its alloys as orthopedic biomaterials: A review, Biomaterials, 27, 1728-1734.
88. Takenaka, T., Y. Narazaki, N. Uesaka, and M. Kawakami. 2008. Improvement of corrosion resistance of magnesium alloys by surface film with rare earth element, Materials Transactions, 49, 1071-1076.
89. Takenaka, T., T. Ono, Y. Narazaki et al. 2007. Improvement of corrosion resistance of magnesium metal by rare earth elements, Electrochimica Acta, 53, 117-121.
90. Tian, J., W. Li, L. Han, and J. Peng. 2010. Creep behavior of an AZ91 Mg alloy reinforced with Al silicate short fibers, Advanced Materials Research, 97-101, 492-495.
91. Umahara, H., M. Takaya, and S. Terauchi. 2003. Chromate-free surface treatments for magnesium alloys, Surface and Coatings Technology, 169-170, 666-669.
92. Wang, L., T. Shinohara, and B.-P. Zhang. 2010. Influence of chloride, sulfate and bicarbonate anions on the corrosion behavior of AZ31 magnesium alloy, Journal of Alloys and Compounds, 496, 500-507.
93. Wang, L.B., J.B. Wang, H.T. Yuan et al. 2004. An electrochemical investigation of Mg1-xAlxNi (x = 0-0.6) hydrogen storage alloys, Journal of Alloys and Compounds, 385, 304-308.
94. Weinzer, N., A. Atrens, G. Song et al. 2005. A critical review of the stress corrosion cracking (SCC) of Mg alloys, Advanced Engineering Materials, 7(8), 659-693.
95. Wen, Z., C. Wu, Ch Dai, and F. Yang. 2009. Corrosion behaviors of Mg and its alloys with different al con-tents in a modified simulated body fluid, Journal of Alloys and Compounds, 488, 392-399.
96. Winzer, N., A. Atrens, G. Song et al. 2005. Critical review of the stress corrosion cracking (SCC) of mag-nesium alloys, Advanced Engineering Materials, 7(8), 659-693.
97. Witte, F., V. Kaese, H. Haferkamp et al. 2005. In vivo corrosion of four magnesium alloys and the associ-ated bone response, Biomaterials, 26, 3557-3562.
98. Witte, F., H. Ulrich, C. Palm et al. 2007a. Biodegradable magnesium scaffolds: Part II: Peri-implant bone remodeling, Journal of Biomedical Materials Research, 81A, 757-765.
99. Witte, F., H. Ulrich, M. Rudert et al. 2007b. Biodegradable magnesium scaffolds: Part I: Appropriate inflammatory response, Journal of Biomedical Materials Research, 81A, 748-756.
100. Wolfe, R.C. 2005. Imparting passivity to vapor deposited magnesium alloys, PhD dissertation, The Pennsylvania State University, University Park, PA.
101. Xin, Y., K. Huo, H. Tao et al. 2008. Influence of aggressive ions on the degradation behavior of biomedical magnesium alloy in physiological environment, Acta Biomaterials, 4, 2008-2015.
102. Yamamoto, A., A. Watanabe, K. Sugahara et al. 2001. Improvement of corrosion resistance of magnesium alloys by vapor deposition, Scripta Materialia, 44, 1039-1042.
103. Zhang, S.Y., Q. Li, B. Chen et al. 2010. Electrodeposition of zinc on AZ91D magnesium alloy pre-treated by stannate conversion coatings, Materials and Corrosion, 61(10), 860-865.
104. Zhang, Z., G. Yu, Y. Quyang et al. 2009. Studies on influence of Zn immersion and fluoride on nickel electroplating on magnesium alloy AZ91D, Applied Surface Science, 255, 7773-7779.
105. Zheng, R.F. and C.H. Liang. 2007. Conversion coating treatment for AZ91 magnesium alloys by a per-manganate-REMS bath, Materials and Corrosion, 58, 193-197.
106. ASM Metals Handbook, Vol. 13B. 2005. S.D. Cramer and B.S. Covino, Jr., Eds., ASM International, Novelty, OH.
107. ASM Specialty Handbook: Mg and Mg Alloys. 1999. M.M. Avedesian and H. Baker, Eds., ASM International, Novelty, OH.
108. Blawert, C., W. Dietzel, E. Ghali, and G. Song. 2006. Anodizing treatments for magnesium alloys and their effect on corrosion resistance in various environments, Advanced Engineering Materials, 8, 511-533.
109. Grey, J.E. and B. Luan. 2002. Protective coatings on magnesium and its alloys-A critical review, Journal of Alloys and Compounds, 336, 88-113.
110. Mueller, W.D., M.L. Nascimento, L. Fernendez, and M. de Mele. 2010. Critical discussion of the results from different corrosion studies of Mg and Mg alloys for biomedical applications, Acta Biomaterials, 6, 1749-1755.
111. Song, G. and A. Atrens. 1999. Corrosion mechanisms of magnesium alloys, Advanced Engineering Materials, 1, 11-33.
112. Song, G. and A. Atrens. 2003. Understanding magnesium corrosion-A framework for improved alloy performance, Advanced Engineering Materials, 5(12), 837-858.
113. Song, G. and A. Atrens. 2007. Recent insights into the mechanism of Magnesium corrosion and research suggestions, Advanced Engineering Materials, 9(3), 177-183.
114. Staiger, M.P., A.M. Pietak, J. Huadmai et al. 2006. Magnesium and its alloys as orthopedic biomaterials: A review, Biomaterials, 27, 1728-1734.
115. Weinzer, N., A. Atrens, G. Song et al. 2005. A critical review of the stress corrosion cracking (SCC) of Mg alloys, Advanced Engineering Materials, 7(8), 659-693.