ELECTRIC MACHINES: Steady State, Transients, and Design with MATLAB®

Electric Machines: Steady State, Transients, and Design with MATLAB®

Volumn , Issue , 2009, Pages 1-777

  Boldea, Ion ^a   Tutelea, Lucian ^a  

^a NONE   (Romania)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85134857109     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9781439882979     Document Type: Book

References (192)

1. ABB-Transformer Handbook, ABB Power Technologies Management Ltd., Baden, Switzerland (www.abb.acom/transformers).
2. A. Van den Bossche and V.C. Valchev, Inductors and Transformers for Power Electronics, CRC Press/Taylor & Francis, Boca Raton, FL, 2004.
3. ABB-Induction Motors Handbook, ABB Power Technologies Management Ltd., Baden, Switzerland (www.abb.com/motors).
4. I. Boldea and S.A. Nasar, Linear Electric Actuators and Generators, Cambridge University Press, Cambridge, U.K., 1997.
5. R.H. Park, Two reaction theory of synchronous machines, AIEE Transaction 48, 1929, 716-727, 338-350.
6. E. Clarke, Circuit Analysis of A-C Power Systems, Vol. 1, Wiley, New York, 1943.
7. Ch. Concordia, Synchronous Machines, Wiley, New York, 1951.
8. R. Richter, Electric Machines, Vols. 1-6, Birkhauser Verlag, Basel, Switzerland, 1951.
9. C.D. White and H.H. Woodson, Electromechanical Energy Conversion, John Wiley & Sons, New York, 1953.
10. C.G. Veinott, Theory and Design of Small Induction Motors, McGraw-Hill, New York, 1959.
11. G. Kron, Equivalent Circuits of Electric Machinery, Wiley, New York, 1951
12. K.P. Kovacs, Symmetrical Components in AC Machinery, Birkhauser Verlag, Basel, Switzerland, 1962
13. V.A. Venicov, Transient Processes in Electrical Power Systems, MIR Publishers, Moscow, Russia, 1964 (in Russian).
14. K. Stepina, Fundamental equations of the space vector analysis of electrical machines, ACTA Technica CSAV, Prague 13, 184-198, 1968.
15. P.L. Alger, The Nature of the Induction Machine, 2nd edn., Gordon and Breach, New York, 1970
16. S. Yamamura, Theory of Linear Induction Motors, John Wiley & Sons, New York, 1972.
17. S.A. Nasar and I. Boldea, Linear Motion Electric Machines, John Wiley & Sons, New York, 1976.
18. M. Poloujadoff, The Theory of Linear Induction Machines, Clarendon Press, Oxford, U.K, 1980.
19. I. Boldea and S.A. Nasar, Linear Motion Electromagnetic Systems, John Wiley & Sons, New York, 1985.
20. T. Kenjo and S. Nagamori, Permanent-Magnet and Brushless DC Motors, Clarendon Press, Oxford, U.K, 1985.
21. P.C. Krause, Analysis of Electric Machinery, McGraw-Hill, New York, 1986.
22. P.L. Cochran, Polyphase Induction Motors, Marcel Dekker, New York, 1989.
23. A.E. Fitzgerald, Ch. Kingsley Jr., and S.D. Umans, Electric Machinery, McGraw-Hill, New York 1990.
24. S.A. Nasar and I. Boldea, Electric Machines Steady-State Operation, Taylor & Francis, New York, 1990.
25. I. Boldea and S.A. Nasar, Electric Machines, Dynamics and Control, CRC Press/Taylor & Francis, Boca Raton, FL, 1993.
26. P. Vas, Electrical Machines and Drives: A Space-Vector Theory Approach, Clarendon Press, Oxford, U.K, 1992.
27. I. Boldea and S.A. Nasar, Vector Control of AC Drives, CRC Press, Boca Raton, FL, 1992.
28. S. Yamamura, Spiral Vector Theory of AC Circuits and Machines, Oxford University Press, Oxford, U.K., 1992.
29. T.J.E. Miller, Switched Reluctance Motors and Their Control, Magna Physics Publishing and Oxford University Press, London, U.K., 1993.
30. D.W. Novotny and T.A. Lipo, Vector Control and Dynamics of AC Drives, Oxford University Press, Oxford, U.K., 1996.
31. I. Boldea and S.A. Nasar, Induction Machine Handbook, CRC Press/Taylor & Francis, New York, 2001.
32. I. Boldea and S.A. Nasar, Linear Motion Electromagnetic Devices, Taylor & Francis, New York, 2001.
33. J.F. Gieras and M. Wing, Permanent Magnet Motors Technology, 2nd edn., Marcel Dekker, New York, 2002.
34. I. Boldea, Electric Generators Handbook, Vol. 1, Synchronous Generators, Vol. 2, Variable Speed Generators, CRC Press/Taylor & Francis, New York, 2006.
35. A. Van den Bossche and V.C. Valchev, Inductors and Transformers for Power Electronics, Chapter 3, Taylor & Francis, New York, 2004.
36. R.J. Parker, Advances in Permanent Magnetism, John Wiley & Sons, New York, 1990.
37. P. Campbell, Permanent Magnet Materials and Their Application, Cambridge University Press, Cambridge, U.K., 1993.
38. I.D. Mayergoyz, Mathematical Models of Hysteresis, Springer-Verlag, New York, 1991.
39. M.A. Mueller, Calculation of iron losses from time-stepped finite-element models of cage induction machines, International Conference on EMD, IEEE Conference Publication 412, 1995.
40. ABB Transformer Handbook, 2005.
41. G. Say, Performance and Design of AC Machines, Pitman and Sons Ltd., London, U.K., 1961, p. 143.
42. I. Boldea and S.A. Nasar, Electric Machines Dynamics, Chapter 1, MacGraw Hill, New York, 1986.
43. I. Boldea and S.A. Nasar, Linear Motion Electromagnetic Devices, Chapter 7, Taylor & Francis Group, New York, 2001.
44. I. Boldea and S.A. Nasar, Linear Motion Electromagnetic Systems, John Wiley & Sons, New York, 1985.
45. T. Sashida and T. Kenjo, An introduction to Ultrasonic Motors, Oxford University Press, Oxford, U.K., 1993.
46. M. Bulo, Modeling and control of traveling piezoelectric motors, PhD thesis, EPFC, Lausanne, Switzerland, 2005.
47. I. Kenjo and S. Nagamori, PM and Brushless DC Motors, Clarendon Press, Oxford, U.K, 1985.
48. K. Vogt, Electric Machines: Design (in German), VEB Verlag, Berlin, Germany, 1988.
49. G. Say and E. Taylor, Direct Current Machines, Pitman, London, U.K, 1985.
50. S.A. Nasar, I. Boldea, and L.E. Unnewehr, Permanent Magnet Reluctance and Selfsynchronous Motors, Chapters 1-5, CRC Press, Boca Raton, FL, 1993.
51. J.F. Gieras and M. Wing, Permanent Magnet Motor Technology, 2nd edition, Chapter 4, Marcel Dekker, New York, 2002.
52. I. Boldea and S.A. Nasar, Electric Drives, 2nd edition, Chapter 4, CRC Press, Taylor & Francis Group, New York, 2005.
53. A. diGerlando and R. Perini, A model for the operation analysis of high speed universal motor with triac regulated mains voltage supply, Symposium on Power Electronics and Electric Drives Automation Motion, Ravello, Italy, 2007, pp. c407-c412.
54. E. Hamdi, Design of Small Electric Machines, Chapters 4-6, Wiley, New York, 1994.
55. J.J. Cathey, Electric Machines, Chapter 5, McGraw-Hill, Boston, MA, 2001.
56. Ch. Gross, Electric Machines, Chapter 9, CRC Press, Taylor & Francis Group, New York, 2006.
57. Alger, P.L., Induction Machines, 2nd edn, Gordon & Breach, New York, 1970 and new edition 1999.
58. Cochran, P.L., Polyphase Induction Motors, Marcel Dekker, New York, 1989.
59. Stepina, K., Single Phase Induction Motors, Springer Verlag, Berlin, Germany, 1981 (in German).
60. Boldea, I. and Nasar, S.A., Induction Machine Handbook, CRC Press, Boca Raton, FL, 2001.
61. Boldea, I., Electric Generator Handbook, Vol. 2, Variable Speed Generators, CRC Press, Boca Raton FL; Taylor & Francis Group, New York, 2005.
62. Yamamura, S., Spiral Vector Theory of AC Circuits and Machines, Clarendon Press, Oxford, U.K, 1992.
63. Heller, B. and Hamata, V., Harmonics Effects in Induction Motors, Elsevier, Amsterdam, the Netherlands, 1977.
64. Cabral, C.M., Analysis of LIM Longitudinal End Effects, Record of LDIA, Birmingham, U.K., 2003, pp. 291-294.
65. Yamamura, S., The Theory of Linear Induction Motors, John Wiley & Sons, New York, 1972.
66. Boldea, I. and Nasar, S.A., Linear Motion Electric Machines, John Wiley & Sons, New York, 1976.
67. Boldea, I. and Nasar, S.A., Linear Motion Electromagnetic Systems, John Wiley & Sons, New York, 1985, Chapter 6.
68. Gieras, J., Linear Induction Drives, Clarendon Press, Oxford, U.K, 1992.
69. Fuji, N., Hoshi, T., and Tanabe, Y., Characteristics of Two Types of End Effect Compensators for LIM, Record of LDIA, Birmingham, U.K., 2003, pp. 73-76.
70. Boldea, I. and Nasar, S.A., Linear Motion Electromagnetic Devices, Taylor & Francis Group, New York, 2001.
71. Tolyiat, H. and Kliman, G. (eds), Handbook of Electric Motors, Marcel Dekker Inc., New York, 2004, Chapter 7.
72. Levi, E., Polyphase Motors: A Direct Approach to Their Design, John Wiley & Sons, New York, 1985.
73. Hamdi, E.S., Design of Small Electrical Machines, John Wiley & Sons, New York, 1994, Chapter 5.
74. Vogt, K., Design of Rotary Electric Machines, VEB Verlag Technik, Berlin, Germany, 1983 (in German).
75. C. Gross, Electric Machines, Chapter 7, CRC Press, Taylor & Francis Group, New York, 2006.
76. M.A. Toliyat and G.B. Kliman (eds.), Handbook of Electric Motors, 2nd edn, Chapter 5, Marcel Dekker, New York, 2004.
77. T. Kenjo and S. Nagamori, PM and Brushless DC Motor, Clarendon Press, Oxford, U.K, 1985.
78. T.J.E. Miller, Brushless PM and Reluctance Motor Drives, Clarendon Press, Oxford, U.K, 1989.
79. S.A. Nasar, I. Boldea, and L.E. Unneweher, PM, Reluctance and Selfsynchronous Motors, CRC Press, Boca Raton, FL, 1993.
80. D.E. Hanselman, Brushless PM Motor Design, McGraw-Hill, Inc., New York, 1994.
81. E.S. Hamdi, Design of Small Electric Machines, John Wiley & Sons, New York, 1994.
82. J.F. Gieras and M. Wing, PM Motor Technology, Marcel Dekker, New York, 2002.
83. T.J.E. Miller, Switched Reluctance Motors and Their Control, Clarendon Press, Oxford, U.K, 1993.
84. I. Boldea and S.A. Nasar, Linear Electric Actuators and Generators, Cambridge University Press, Cambridge, U.K., 1997.
85. I. Boldea and S.A. Nasar, Linear Motion Electromagnetic Devices, CRC Press, Taylor & Francis Group, New York, 2001.
86. I. Boldea, Variable Speed Generators, Chapter 10, CRC Press, Taylor & Francis Group, New York, 2005.
87. I. Boldea, Synchronous Generators, Chapter 4, CRC Press, Taylor & Francis Group, New York, 2005.
88. I. Boldea, T. Dumitrescu, and S.A. Nasar, Steady state unified treatment of capacitor A.C. motors, IEEE Trans, 14(3), 1999, 577-582.
89. R.N. Park, The reaction theory of synchronous machines: A generalized method of analysis, AIEE Trans. 48, 1929, 716-730.
90. W.V. Lion, Transient Analysis of Alternating Current Machinery: An Application of the Method of Symmetrical Components, MIT, Cambridge, MA, 1954.
91. I. Racz and K.P. Kovacs, Transient Regimes of AC Machines, Springer Verlag, 1995
92. J. Stepina, Complex equations for electric machines at transient conditions, Proceedings of ICEM-1990, Cambridge, MA, vol. 1, pp.43-47.
93. I. Boldea and S.A. Nasar, Electric Machines Dynamics, MacMillan Publishing Company, New York, 1986.
94. D.W. Novotny and T.A. Lipo, Vector Control and Dynamics of AC Machines, OUP, Oxford, U.K, 1996.
95. N. Bianchi, Finite Element Analysis of Electric Machines, CRC Press, Taylor & Francis Group, New York, 2005.
96. M.A. Arjona and D.C. MacDonald, A new lumped steady-state model derived from FEA, IEEE Trans. 14, 1999, 1-7.
97. V. Ostovic, Dynamics of Saturated Electric Machines, Springer Verlag, New York, 1989.
98. S. Yamamura, Spiral Vector Theory of AC Circuits and Machines, Clarendon Press, Oxford, U.K, 1992.
99. I. Boldea and S.A. Nasar, Unified treatment of core losses and saturation in orthogonal axis model of electric machines, Proc. IEE, 134(6), 1987, 355-363.
100. E. Levi, Saturation modeling in dq model of salient pole synchronous machines, IEEE Trans. EC 14, 1999, 44-50.
101. B. Mirafzal, G. Skibinski, R. Tallam, D. Schlegel, and R. Lukaszewski, Universal induction motor model for low to high frequency response characteristics, Proceedings of IEEE-IAS, Tampa, FL, 2006.
102. P.C. Sen, Thyristor DC Drives, John Wiley & Sons, New York, 1980.
103. T. Kenjo and S. Nagamori, Permanent Magnet and Brushless DC Motors, Chapter 7, Clarendon Press, Oxford, U.K., 1985.
104. I. Boldea and S.A. Nasar, Electric Machines Dynamics, Chapter 3, MacMillan Publishing Company, New York, 1986.
105. H.A. Toliyat and G.B. Kliman (eds.), Handbook of Electric Motors, 2nd edn., Chapter 6, Marcel Dekker, New York, 2004.
106. C.M. Ong, Dynamic Simulation of Electric Machinery, Chapter 8, Prentice Hall, Englewood Cliffs, NJ, 1998.
107. I. Boldea and S.A. Nasar, Electric Drives, 2nd edn., CRC Press, Taylor & Francis Group, New York, 2005.
108. I. Boldea and S.A. Nasar, Unified treatment of core losses and magnetic saturation in the orthogonal axis model of electric machines, IEE Proc. B, 134(6), 1987, 355-365.
109. P.C. Krause, F. Mazari, T.L. Skvarenina, and D.W. Olive, The theory of neglecting stator transients, IEEE Trans, 93, 1976, 729-737.
110. J. Machowski, J.W. Bialek, and J.R. Bumby, Power System Dynamics and Stability, John Wiley & Sons, New York, 1997.
111. I. Boldea and V. Coroban, BEGA-Vector control for wide constant power speed range at unity power factor, Record of OPTIM-2006, Brasov, Romania, 2006.
112. I. Boldea and S.A. Nasar, Electric Drives, 2nd edn., Chapters 11 and 13, CRC Press, Taylor & Francis Group, New York, 2005.
113. R. Krishnan, Electric Motor Drives, Prentice Hall, Upper Saddle River, NJ, 2001.
114. T.J. Miller, Switched Reluctance Motors and Their Control, Clarendon Press, Oxford, 1993.
115. R. Krishnan, Switched Reluctance Motor Drives, CRC Press, Boca Raton, FL, 2001.
116. I. Boldea, Electric Generators Handbook, Vol. 1, Synchronous generators, Chapter 5, CRC Press, Taylor & Francis Group, New York, 2005.
117. M. Namba, J. Hosoda, S. Dri, and M. Udo, Development for measurement of operating parameters of SG and control system, IEEE Trans, 200(2), 1981, 618-628.
118. A. Keyhani, S.I. Moon, A. Tumageanian, and T. Leskan, Maximum likelihood estimation of synchronous machine parameters from flux decay data, Proceedings of ICEM-1992, Manchester, U.K, Vol. 1, pp. 34-38, 1992.
119. P.L. Dandeno and H.K. Karmaker, Experience with standstill frequency response (SSFR) testing of salient pole synchronous machines, IEEE Trans, 14(4), 1999, 1209-1217.
120. S.D. Umans, I.A. Malick, and G.L. Wlilson, Modeling of solid iron rotor turbogenerators, Part 1&2, IEEE Trans, 97(1), 1978, 269-298.
121. A. Watson, A systematic method to the determination of SM parameters from results of frequency response tests, IEEE Trans, 15(4), 2000, 218-223.
122. D. Iles-Klumpner, I. Boldea et al., Experimental characterization of IPMSM with tooth-wound coils, Record of EPE-PEMC 2006, Porto Rose, Slovenia, 2006.
123. I. Boldea and S.A. Nasar, Linear Motion Electromagnetic Systems, John Wiley & Sons, New York, 1985.
124. I. Boldea and S.A. Nasar, Linear Electric Actuators and Generators, Cambridge University Press, Cambridge, U.K., 1997.
125. J. Gieras, Linear Synchronous Drives, CRC Press, Boca Raton, FL, 1994.
126. I. Boldea and S.A. Nasar, Linear Motion Electromagnetic Devices, Taylor & Francis, New York, 2001.
127. S. Ahmed-Zaid and M. Taleb, Structural modeling of small and large induction machines using integral manifolds, IEEE Trans. 6, 1991, 529-533.
128. M. Taleb, S. Ahmed-Zaid, and W.W. Phia, Induction machine models near voltage collapse, EMPS, 25(1), 1997, 15-28.
129. M. Akbaba, A phenomenon that causes most source transients in three phase IMs, EMPS, 12(2), 1990, 149-162.
130. I. Boldea and S.A. Nasar, Induction Machine Handbook, CRC Press, Boca Raton, FL, 2001.
131. S.A. Nasar, Electromechanical energy conversion in n m-winding double cylindrical structures in presence of space harmonics, IEEE Trans, 87, 1968, 1099-1106.
132. P.C. Krause, Analysis of Electric Machinery, McGraw-Hill, New York, 1986.
133. H.A. Tolyiat and T.A. Lipo, Transient analysis of cage IMs under stator, rotor, bar and end ring faults, IEEE Trans, 10(2), 1995, 241-247.
134. S.T. Manolas and J.A. Tegopoulos, Analysis of squirrel cage with broken bars and end rings, Record of IEEE-IEMDC, 1997.
135. I. Kerszenbaum and C.F. Landy, The existence of inter-bar current in three phase cage motors with rotor bar and (or) end ring faults, IEEE Trans., PAS 103, 1984, 1854-1861.
136. S.L. Ho and W.H. Fu, Review and future application of FEM in IMs, EMPS J., 26(1), 1998, 111-125.
137. J.F. Bangura and M.A. Demerdash, Performance characterization of torque ripple reduction in IM adjustable speed drives using timestepping coupled FE state space techniques, Record of IEEE-IAS, 1, 1998, 218-236.
138. I. Boldea and S.A. Nasar, Electric Drives, 2nd edition, CRC Press, Boca Raton, FL, 2005.
139. I. Boldea, Electric Generator Handbook, Vol. 2, Variable Speed Generators, CRC Press, Boca Raton, FL, 2005.
140. A. Watson, A systematic method to the determination of SM parameters from results of frequency response tests, IEEE Trans, 15(4), 2000, 218-223.
141. I. Boldea and S.A. Nasar, Linear Motion Electromagnetic Devices, Taylor & Francis Group, New York, 2001.
142. I. Boldea and S.A. Nasar, Linear Motion Electric Machines, Chapter 4, John Wiley & Sons, New York, 1976.
143. F. Gieras, Linear Induction Drives, Oxford University Press, Oxford, U.K., 1994.
144. I. Boldea and S.A. Nasar, Unified treatment of core losses and saturation in the orthogonal axis model of electrical machines, Proc. IEE, London, 134(6), 1987, 355-363.
145. N. Bianchi, Electrical Machine Analysis Using Finite Elements, CRC Press, Taylor & Francis Group, Boca Raton, FL, 2005.
146. S.J. Salon, Finite Element Analysis of Electrical Machines, Kluwer Academic Publishers, Norwell, MA, 2000.
147. D.A. Lowther and P.P. Silvester, Computer-Aided Design in Magnetics, Springer-Verlag, Berlin, Germany, 1986.
148. C.W. Steele, Numerical Computation of Electric and Magnetic Fields, Van Nostrand Reinhold Company, New York, 1987.
149. P.P Silvester and R.L. Ferrari, Finite Elements for Electrical Engineers, Cambridge University Press, London, U.K., 1983.
150. D. Meeker, Finite Element Method in Magnetics, User’s Manual, Version 4.0, 2006.
151. G. Arfken, Circular Cylindrical Coordinates, 3rd edn., Academic Press, Orlando, FL, pp. 95-101, 1985.
152. W.H. Beyer, CRC Standard Mathematical Tables, 28th edn., CRC Press, Boca Raton, FL, 1987.
153. G.A. Korn and T.M. Korn, Mathematical Handbook for Scientists and Engineers, McGraw-Hill, New York, 1968.
154. C.W. Misner, K.S. Thorne, and J.A. Wheeler, Gravitation, W.H. Freeman, San Francisco, CA, 1973.
155. P. Moon and D.E. Spencer, Circular-Cylinder Coordinates. Table 1.02 in field theory handbook, including coordinate systems, differential equations, and their solutions, 2nd edn., Springer-Verlag, New York, 1988.
156. P.M. Morse and H. Feshbach, Methods of Theoretical Physics, Part I, McGraw-Hill, New York, p. 657, 1953.
157. J.J. Walton, Tensor calculations on computer: Appendix. Comm. ACM, 10, 1967, 183-186.
158. J.S. Beeteson, Visualising Magnetic Fields, Academic Press, San Diego, CA, 1990.
159. H.E. Knoepfel, Magnetic Fields-Comprehensive Theoretical Treatise for Practical Use, Wiley-Interscience, John Wiley & Sons, New York, 2000.
160. F.E. Low, Classical Field Theory-Electromagnetism and Gravitation, Wiley-Interscience, John Wiley & Sons, New York 1997.
161. O.C. Zienkiewicz, R.L. Taylor, and J.Z. Zhu, The Finite Element Method: Its Basis and Fundamentals, 6th edn., Elsevier Butterworth-Heinemann, Oxford, U.K., 2005.
162. I. Boldea, S. Agarlita, L. Tutelea, and F. Marignetti, Novel linear PMvalve actuator: FE design and dynamic model, Record of LDIA, 2007.
163. Opera 2D-Reference manual, VF-07-02-A2, Vector Field Limited, Oxford, U.K.
164. Opera 2D-User manual, Vector Field Limited, Oxford, U.K.
165. R. Ierusalimschy, L.H. de Figueiredo, and W. Celes, Lua 5.1 Reference Manual, Lua.org, ISBN 85-903798-3-3, 2006.
166. R. Ierusalimschy, Programming in Lua, 2nd edn., Lua.org, 2006.
167. I. Boldea and L. Tutelea, Optimal design of residential brushless d.c. permanent magnet motors with FEM validation, Record of ACEMP, Bodkum, Turkey, 2007.
168. N. Bianchi, S. Bolognani, and F. Luise, Analysis and design of a brushless motor for high speed operation, Energ. Convers. IEEE Trans., 20(3), 2005, 629-637.
169. V. Gradinaru, L. Tutelea, and I. Boldea, 25 kW, 15 krpm, 6/4 PMSM: Optimal design and torque pulsation reduction via FEM, Record of OPTIM 2008.
170. C.B. Rasmusen, Modeling and simulation of surface mounted PM motors, PhD thesis, Institute of Energy Technology, Aalborg University, Denmark, 1997.
171. V. Zivotic, W.L. Soong, and N. Ertugrul, Iron Loss Reduction in an Interior PM Automotive Alternator, IEEE IAS Annual Meeting, pp. 1736-1743, 2005.
172. I. Boldea and S.A. Nasar, Induction Machine Handbook, CRC Press, New York, 2001.
173. S.S. Rao, Engineering Optimization: Theory and Practice, 3rd edn., John Wiley & Sons, New York, 1996.
174. R. Hooke and T.A. Jeeves, Direct search solution of numerical and statistical problems. J. ACM, 8(2), 1961, 212-229.
175. R.L. Haupt, and S. Haupt, Practical Genetic Algorithms, 2nd edn., John Wiley & Sons, Hoboken, NJ, 2004.
176. D.E. Goldberg, Genetic Algorithms, Addison-Wesley, Reading, MA, 1989.
177. J.H. Holland, Adaption in Natural and Artificial Systems, The University of Michigan Press, Ann Arbor, MI, 1975.
178. D.C. Hanselman, Brushless Permanent Magnet Motor Design, 2nd edition, The Writers Collective, Cranston, RI, 2003.
179. J.R. Hendershot and T.J. Miller, Design of Brushless Permanent-Magnet Motors, Oxford University Press, Oxford, U.K., 1995.
180. W. Ouyang, D. Zarko, and T.A. Lipo, Permanent magnet machine design practice and optimization, Industry Applications Conference, 41st IAS Annual Meeting. Conference Record of the 2006 IEEE, Tampa, FL, Vol. 4, pp. 1905-1911, 2006.
181. C.B. Rasmusen, Modeling and simulation of surface mounted PM motors, PhD thesis, Institute of Energy Technology, Aalborg University, Aalborg, Denmark, 1996.
182. Thin non-oriented Electrical Steel-SURA 007, Products Information, Surahammars Bruk, Sweden.
183. I. Boldea and S.A. Nasar, Induction Machine Handbook, CRC Press, New York, 2001.
184. M.A. Awadallah, Parameter estimation of induction machines from nameplate data using particle swarm optimization and genetic algorithm techniques, Elec. Power Compon. Syst., 36(8), 2008, 801-814.
185. E.S. Hamdi, Design of Small Electric Machines, John Wiley & Sons, Chichester, U.K, 1994.
186. V. Ostovic, Dynamics of Saturated Electric Machines, Springer-Verlag, New York, 1989.
187. B. Heller and V. Hamata, Harmonic Field Effects in Induction Machines, Elsevier, Amsterdam, the Netherlands, 1977.
188. G. Madescu, I. Boldea, and T.J.E. Miller, The optimal lamination approach to induction, machine design global optimization, IEEE Trans. Ind. Applic., 34(3), 1998, 422-428.
189. Z.M. Zhao, S. Meng, C.C. Chan, and E.W.C. Lo, A novel induction machine design suitable for, inverter-driven variable speed systems, IEEE Trans. Energy Convers., 15(4), 2000, 413-420.
190. T.C. O’Connell and P.T. Krein, A preliminary investigation of computeraided Schwarz-Christoffel transformation for electric machine design and analysis, 2006 IEEE COMPEL Workshop, Rensselaer Polytechnic Institute, Troy, NY, July 16-19, 2006, pp. 166-172.
191. M.B. Norton and P.J. Leonard, An object oriented approach to parameterized electrical machine design, IEEE Trans. Magn., 36(4), 2000, 1687-1691.
192. J. Avey and R. King, Effects of specification requirements on induction machine design and operation, Paper No. PCIC-2003-11, pp. 111-120.