REVERSE ENGINEERING: TECHNOLOGY OF REINVENTION

Reverse Engineering: Technology of Reinvention

Volumn , Issue , 2010, Pages 1-323

  Wang, Wego ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85133035437     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/EBK1439806302     Document Type: Book

References (80)

1. ASTM. 2004. Standard test methods for spinal implant constructs in a vertebretomy model. ASTM F1717-04. West Conshohocken, PA: ASTM International.
2. Boehm, B. W. 1979. Guidelines for verifying and validating software requirements and design specifications. In Euro IFIP 79, ed. P. A. Samet, 711-719. Amsterdam: North-Holland Publishing Company.
3. Chikofsky, E. J., and Cross, J. H., II. 1990 January. Reverse engineering and design recovery: A taxonomy. IEEE software. Washington, DC: IEEE Computer Society, 7:13-17.
4. Francis, P. H. 1988. Project Management. In Tool and Manufacturing Engineers Handbook volume 5-Manufacturing Management, ed. R. F. Veilleux and L. W. Petro, 17-20. Dearborn: SME.
5. Freerisks, C. 2004. GD250: Lifecycle process mode “V-model” in the World Wide Web. http://www.informatik.uni-bremen.de/uniform/gdpa/part3/p3re.htm (accessed September 25, 2009).
6. Fu, P. 2008. Reverse engineering in the medical device industry. In Reverse engineering: An industry perspective, ed. V. Raja and K. J. Fernandes, 177-93. Berlin: Springer.
7. MIL-HDBK-115A. 2006. US Army Reverse Engineering Handbook (Guidelines and Procedures). 6. Redstone Arsenal: US Army Aviation and Missle Command.
8. Cleveland, B. 2009. Prototyping process overview. Adv. Mater. Processes 167:21-23.
9. Chivate, P., and A. Jablokow. 1993. Solid-model generation from measured point data. Comput. Aided Design 25:587-600.
10. 3DScanCo/GKS Global Services. 2009a. Case studies: ARINC in the World Wide Web. http://www.3dscanco.com/clients/case-studies/arinc.cfm (accessed October 1, 2009).
11. 3DScanCo/GKS Global Services. 2009b. Case studies: Airbus A319 in the World Wide Web. http://www.3dscanco.com/clients/case-studies/computationalmethods.cfm (accessed October 1, 2009).
12. 3DScanCo/GKS Global Services. 2009c. Case studies: The Southern 408 in the World Wide Web. http://www.3dscanco.com/clients/case-studies/panoz-automotive.cfm (accessed October 1, 2009).
13. Weir, D., Milroy, M., Bradley, C., and Vickers, G. 1996. Reverse engineering physical models employing wrap-around B-spline surfaces and quadrics. Proc. Inst. Mech. Eng. B. 210:147-57.
14. ASTM. 2004. Standard test methods for determining average grain size. ASTM E112-96(2004)e2. West Conshohocken, PA: ASTM International.
15. ASTM. 2008. Standard test methods for Rockwell hardness of metallic materials. ASTM E18-08b. West Conshohocken, PA: ASTM International.
16. ASTM. 2009. Standard specification for ethyl cellulose molding and extrusion compounds. ASTM D787-09. West Conshohocken, PA: ASTM International.
17. Budynas, R. G., and Nisbett, J. K. 2008. Mechanical engineering design. New York: McGraw-Hill.
18. Cáceres, C. H. 2002. Hardness and yield strength in cast Mg-Al alloys. AFS Transaction 110:1163-1169.
19. Dieter, G. E. 1986. Mechanical metallurgy. New York: McGraw-Hill.
20. Hall, E. O. 1951. The deformation and aging of mild steel: III discussion of results. Proc. Phys. Soc. B64:747.
21. Inglis, C. E. 1913. Stresses in a plate due to the presence of cracks and sharp corners. Trans. Inst. Nav. Archit. 55 pt. 1:219-230.
22. ISO. 2003. Steels-Micrographic determination of the apparent grain size. Geneva, Switzerland: ISO.
23. ISO. 2005. Metallic materials-Rockwell hardness test. ISO 6508-1. Geneva, Switzerland: ISO.
24. Krause, D. E. 1969. Gray iron-A unique engineering material. ASTM Special Publication 455. West Conshohocken, PA: ASTM.
25. Low, S. R. 2001. Rockwell hardness measurement of metallic materials. NIST SP 960-5. Washington, DC: NTSB.
26. Orowan, E. 1945. Notch brittleness and the strength of metals. Trans. Inst. Eng. Shipbuild. Scot. 89:165.
27. Petch, N. J. 1953. Cleavage strength of polycrystals. JISI 174:25.
28. Reed-Hill, R. E. 1973. Physical metallurgy principles. Monterey, CA: Brooks/Cole, Wadsworth.
29. Colavita, M., and De Paolis, F. 2001. Corrosion management of Italian Air Force fleet. In Life management techniques for ageing air vehicles conference proceedings. RTO-MP-079 (II). Neuilly-sur-Seine: NATO Research and Technology Organization.
30. Dieter, G. E. 1986. Mechanical metallurgy. New York: McGraw-Hill.
31. Kuruvilla, A. K. 1999. Life prediction and performance assurance of structural materials in corrosive environments. A state of the art report in AMPT-15. Rome: AMPTIAC.
32. Kvernes, I. A., and Kofstad, P. 1972. Met. Trans. 3:1518.
33. NTSB. 2005. http://www.ntsb.gov/Pressrel/2005/051222a.htm (accessed December 24, 2009).
34. Rice, R. C. 1988. Fatigue design handbook. Warrendale, PA: SAE.
35. Sawai, T., Matsuoka, S., Abe, T., et al. 2003. Method of evaluating high fatigue strength material in high tensile strength steel and creation of high fatigue strength material. U.S. Patent 6546808.
36. Walker, K. 1970. Effects of environment and complex load history on fatigue life. ASTM STP 462. West Conshohocken, PA: ASTM International.
37. ASME ANSI. 2002. Surface texture, surface roughness, waviness, and lay. ASME ANSI B46.1-2002. New York: ASME ANSI.
38. ASTM. 2006a. Standard test method for evaluating the microstructure of graphite in iron castings. ASTM A247-06. West Conshohocken, PA: ASTM International.
39. ASTM. 2006b. Standard specification for austempered ductile iron castings. ASTM A897/ A897M-06. West Conshohocken, PA: ASTM International.
40. ASTM. 2006c. Standard specification for precipitation-hardening nickel alloy bars, forgings, and forging stock for high-temperature service. ASTM B637-06e1. West Conshohocken, PA: ASTM International
41. ASTM. 2009. Standard specification for ductile iron castings. ASTM A536-84. West Conshohocken, PA: ASTM International.
42. Bhadeshia, H. K. D. H. 2003. Nickel-based superalloys. University of Cambridge. http://www.msm.cam.ac.uk/phase-trans/2003/Superalloys/superalloys.html (accessed December 16, 2008).
43. Bond, B. J., and Kennedy, R. L. 2005. Evaluation of Allvac® 718Plus™ alloy in the cold worked and heat treated condition. In Superalloys 718, 625, 706 and derivatives 2005, ed. E. A. Loria. 203-212, Warrendale, PA: TMS.
44. Durand-Charre, M. 1997. The microstructure of superalloys. Amsterdam: Gordon and Breach Science.
45. Durst, K., and Göken, M. 2004. Micromechanical characterisation of the influence of rhenium on the mechanical properties in nickel-base superalloys. Mater. Sci. Eng. A387-89:312-16.
46. Erikson, G. L. 1996. Superalloys, ed. R. D. Kissinger, et al., 35. Warrendale, PA: TMSAIME.
47. ISO. 1976. Spheroidal graphite cast irons. ISO 1083:2004. Geneva: ISO.
48. Jena, J. K., and Chaturvedi, M. C. 1984. The role of alloying elements in the design of nickel-base superalloys. J. Mater. Sci. 19:3121-39.
49. Keough, J. R. 1998. Ductile iron data for design engineers. Section IV. Austempered ductile iron. http://www.ductile.org/didata/section4/4intro.htm#Austempering (accessed January 2, 2009).
50. Hosogai, S., and Ito, H. 2005. Responding to the RoHS directive and technology for low voltage circuit breakers. Technical Report. Mitsubishi Electric ADVANCE. http://global.mitsubishielectric.com/pdf/advance/vol110/110_TR10.pdf (accessed January 2, 2009).
51. IPC. 2004. Monotonic bend characterization of broad-level interconnects. IPC-9702. Northbrook, IL: IPC.
52. Rolinski, E., Sharp, G., and Konieczny, A. 2006. Plasma nitriding automotive stamping dies. Heat Treating Progr. September/October, 6:19-23.
53. SAE. 1980. Residual stress measurement by X-ray diffraction, ed. M. E. Hilley, 62-65. SAE J784A. Warrendale, PA: SAE.
54. SAE AMS. 2008. Heat treatment of steel parts, general requirements. SAE AMS 2759. Warrendale, PA: SAE International.
55. SAE International. 2008. An abridged history of SAE. http://www.sae.org/about/general/history (accessed December 3, 2008).
56. Schmitt Industries, Inc. 2009. http://www.schmitt-ind.com/pdf/Roughness.pdf (accessed June 22, 2009).
57. Skewes, S. 2009. The brazing guide, induction atmospheres. http://www.inductionatmospheres.com/brazing.html?gclid=CL7oo6X68pcCFQEoGgodBjXbDg (accessed January 3, 2009).
58. Zhang, J., and Singer, R. F. 2004. Effect of Zr and B on castability of Ni-base superalloy IN792. Metal. Mater. Trans. 35A:1337.
59. Bartlo, L. J. 1969. Effect of microstructure on the fatigue properties of Ti-6Al-4V bar. In Fatigue at high temperature, ed. L.F. Coffin, 144-54. ASTM STP 459. Philadelphia: ASTM International.
60. Dempsey, J. http://www.anvilfire.com (accessed April 24, 2009).
61. American Society of Mechanical Engineers. 2003. 2003 unified inch screw threads (UN and UNR thread form). Standard B1.1. New York: ASME.
62. American Society of Mechanical Engineers. 2005. 2005 metric screw threads: M profile. Standard B1.13M. New York: ASME.
63. ASTM. 2007. Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials. ASTM E466-07. West Conshohocken, PA: ASTM International.
64. ASTM. 2008. Standard test method for conducting cyclic potentiodynamic polarization measurements to determine the corrosion susceptibility of small implant devices. ASTM F2129-08. West Conshohocken, PA: ASTM International.
65. ASTM. 2009a. Standard practice for operating salt spray (fog) apparatus. ASTM B117-09. West Conshohocken, PA: ASTM International.
66. ASTM. 2009b. Standard test method for bending fatigue testing for copper-alloy spring materials. ASTM B593-96(2009)e1. West Conshohocken, PA: ASTM International.
67. Federal Aviation Administration. 1995. Parts Manufacturer Approval procedures. Order 8110.42. Washington, DC: FAA.
68. Fisher, J. W., and Struik, J. H. 1974. Guide to design criteria for bolted and riveted joints. New York: Wiley.
69. Guthrie, J., Battat, B., and Grethlein, C. 2002. Accelerated corrosion testing. Mater. Ease 6:11-15. http://ammtiac.alionscience.com/pdf/2002MaterialEase19.pdf (assessed June 30, 2009).
70. Research Council on Structural Connections (RCSC). 2004. Specification for structural joints using ASTM A325 or A490 bolts. Chicago: American Institute of Steel Construction.
71. Federal Circuit Court. 1992. Atari Games Corp. v. Nintendo of Am. Inc., 975 F.2d 832, 842-44.
72. Federal Circuit Court. 2003. Bowers v. Baystate Tech. Inc., 320 F.3d 1317, 1323-1325.
73. Fifth Circuit Court. 1988. Vault Corp. v. Quaid Software, Ltd., 847 F.2d 255, 270.
74. Ninth Circuit Court. 1982. Chicago Lock Co. v. Fanberg. 676 F.2d 400.
75. Ninth Circuit Court. 1992. Sega Enterprises Ltd. v. Accolade Inc., 977 F.2d 1510.
76. Pooley, J. H. A. 1997. Trade secrets. Law Journal Press (looseleaf updated). 5.02[2]:5-17.
77. Samuelson, P., and Scotchmer, S. 2002. The law and economics of reverse engineering. Yale Law J. 111:1575-663.
78. Second Circuit Court. 1987. Brandir International, Inc. v. Cascade Pacific Lumber Co., 834 F.2d 1141.
79. Supreme Court. 1974. Kewanee Oil Co. v. Bicron Corp., 416 U.S. 470.
80. Supreme Court. 1989. Bonito Boats, Inc. v. Thunder Craft Boats, Inc., 489 U.S. 141, 160-61, 164.