메뉴 건너뛰기




Volumn , Issue , 2006, Pages 1-220

Polymeric Foams: Science and Technology

Author keywords

[No Author keywords available]

Indexed keywords


EID: 85122717773     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book
Times cited : (158)

References (292)
  • 3
    • 0043090634 scopus 로고
    • John Wiley & Sons, New York
    • Benning, C.J., Plastic Foams, Vol. I & II, John Wiley & Sons, New York, 1969.
    • (1969) Plastic Foams , vol.1-2
    • Benning, C.J.1
  • 4
    • 0004201730 scopus 로고
    • Hemi-Sphere/McGraw-Hill Co., New York
    • Stralen, S.V. and Cole, R., Boiling Phenomena, Vol. 1, Hemi-Sphere/McGraw- Hill Co., New York, 1979.
    • (1979) Boiling Phenomena , vol.1
    • Stralen, S.V.1    Cole, R.2
  • 5
    • 0005150473 scopus 로고    scopus 로고
    • Lee, S.T., Ed., CRC Press (ex Technomic)
    • Lee, S.T., Foam Extrusion, Lee, S.T., Ed., CRC Press (ex Technomic), 2000, chap. 4.
    • (2000) Foam Extrusion , vol.4
    • Lee, S.T.1
  • 13
    • 0005150473 scopus 로고    scopus 로고
    • Lee, S.T., Ed., CRC Press (ex Technomic)
    • Lee, S.T., Foam Extrusion, Lee, S.T., Ed., CRC Press (ex Technomic), 2000, chap. 1.
    • (2000) Foam Extrusion , vol.1
    • Lee, S.T.1
  • 21
    • 23944447574 scopus 로고
    • Benders, R.J. Ed., Lake, Libertyville, IL, Section XII.
    • Kennedy, R.N., Handbook of Foamed Plastics, Benders, R.J. Ed., Lake, Libertyville, IL, 1965, Section XII.
    • (1965) Handbook of Foamed Plastics
    • Kennedy, R.N.1
  • 26
    • 85122716430 scopus 로고
    • also British Patent 1,152,306, 1969.
    • Spa, L.M.P., Italian Patent 795, 363, 1967, also British Patent 1, 152, 306, 1969.
    • (1967) Italian Patent 795,363
    • Spa, L.M.P.1
  • 31
    • 0005150473 scopus 로고    scopus 로고
    • Lee, S.T., Ed., CRC Press (ex Tech- nomic)
    • Xanthos, M. and Dey, S., Foam Extrusion, Lee, S.T., Ed., CRC Press (ex Tech- nomic), 2000, chap. 11.
    • (2000) Foam Extrusion , vol.11
    • Xanthos, M.1    Dey, S.2
  • 32
    • 85122715612 scopus 로고
    • Cellular Solids. Pergamon, Oxford, London
    • Gibson, L.J. and Ashby, M.F., Cellular Solids, Pergamon, Oxford, London, 1988.
    • (1988) Ashby, M.F
    • Gibson, L.J.1
  • 35
    • 0003826531 scopus 로고
    • Van Nostrand Reinhold Co., New York.
    • Martelli, F., Twin Screw Extruders, Van Nostrand Reinhold Co., New York, 1983, chap. 7.
    • (1983) Twin Screw Extruders , vol.7
    • Martelli, F.1
  • 42
    • 85122715399 scopus 로고    scopus 로고
    • Freedonia Group Inc., Cleveland, OH
    • Freedonia Group Report, Foamed Plastics, Freedonia Group Inc., Cleveland, OH, 2002.
    • (2002) Foamed Plastics
  • 45
    • 85122716362 scopus 로고    scopus 로고
    • 7th FoamTech Meeting, Canadian National Research Council, Jun
    • Handa, P. and Zhang, Z., Sorption of CO2 in Polycarbonates, 7th FoamTech Meeting, Canadian National Research Council, Jun., 1999.
    • (1999) Sorption of CO2 in Polycarbonates
    • Handa, P.1    Zhang, Z.2
  • 46
    • 0008883222 scopus 로고
    • Thermodynamics of High Polymer Solutions
    • Florry, P. J., Thermodynamics of High Polymer Solutions, J. Chem. Phys., 10, 51-61, 1942.
    • (1942) J. Chem. Phys. , vol.10 , pp. 51-61
    • Florry, P.J.1
  • 47
    • 5544319611 scopus 로고
    • Theories of Solutions of High Polymers
    • Huggins, M.L., Theories of Solutions of High Polymers, J. Amer. Chem. Sci., 64, 1712-1720, 1942.
    • (1942) J. Amer. Chem. Sci. , vol.64 , pp. 1712-1720
    • Huggins, M.L.1
  • 50
    • 85122718195 scopus 로고    scopus 로고
    • A Fundamental Study of Thermoplastic Foam Extrusion with Physical Blowing Agents
    • Khemani, K.C., Ed., ACS Symposium Series 669
    • Lee, S.T., A Fundamental Study of Thermoplastic Foam Extrusion with Physical Blowing Agents, in Polymeric Foams, Khemani, K.C., Ed., ACS Symposium Series 669, 1997, chap. 13.
    • (1997) in Polymeric Foams , vol.13
    • Lee, S.T.1
  • 51
    • 0032124172 scopus 로고    scopus 로고
    • Solubilities of Nitrogen, Isobutane and Carbon Dioxide in Polyethylene
    • Chaudary, B.I. and Johns, A.I., Solubilities of Nitrogen, Isobutane and Carbon Dioxide in Polyethylene, J. Cell. Plast., 34, 312-328, 1998.
    • (1998) J. Cell. Plast. , vol.34 , pp. 312-328
    • Chaudary, B.I.1    Johns, A.I.2
  • 52
    • 0016871568 scopus 로고
    • Solubility of Gases and Liquids in Molten Polystyrene
    • Stiel, L.I. and Harnish, D.F., Solubility of Gases and Liquids in Molten Polystyrene, AIChE, 22, 117, 1976.
    • (1976) AIChE , vol.22 , pp. 117
    • Stiel, L.I.1    Harnish, D.F.2
  • 53
    • 85056333203 scopus 로고    scopus 로고
    • Solubility and Diffusivity
    • Gendron, R., Ed., CRC Press, Boca Raton, FL
    • Nawaby, A.V. and Zhang, Z., Solubility and Diffusivity, in Thermoplastic Foam Processing, Gendron, R., Ed., CRC Press, Boca Raton, FL, 2004, chap. 1.
    • (2004) in Thermoplastic Foam Processing , vol.1
    • Nawaby, A.V.1    Zhang, Z.2
  • 54
    • 9744248330 scopus 로고    scopus 로고
    • Solubility of Butane and Isobutane in Molten Polypropylene and Polystyrene
    • Sato, Y., Wang, M., Takishima, S., Masuoka, H., Watanabe, T. and Fukasawa, Y., Solubility of Butane and Isobutane in Molten Polypropylene and Polystyrene, Poly. Eng. Sci., 44, 11, 2083-2089, 2004.
    • (2004) Poly. Eng. Sci. , vol.44 , Issue.11 , pp. 2083-2089
    • Sato, Y.1    Wang, M.2    Takishima, S.3    Masuoka, H.4    Watanabe, T.5    Fukasawa, Y.6
  • 55
    • 2342590228 scopus 로고
    • Statistical Thermodynamics of Polymer Solutions
    • Sanchez, I.C. and Lacombe, R.H., Statistical Thermodynamics of Polymer Solutions, Macromolecules, 11, 6, 1145-1156, 1978.
    • (1978) Macromolecules , vol.11 , Issue.6 , pp. 1145-1156
    • Sanchez, I.C.1    Lacombe, R.H.2
  • 56
    • 84985569623 scopus 로고
    • Modeling High-Pressure Gas-Polymer Mixtures Using the Sanchez-Lacome Equation of State
    • Kiszka, M.B., Meilchen, M.A., and McHugh, M.A., Modeling High-Pressure Gas-Polymer Mixtures Using the Sanchez-Lacome Equation of State, J. App. Poly. Sci., 36, 583-97, 1988.
    • (1988) J. App. Poly. Sci. , vol.36 , pp. 583-597
    • Kiszka, M.B.1    Meilchen, M.A.2    McHugh, M.A.3
  • 57
    • 0028496771 scopus 로고
    • Thermodynamics of Polymer Melts Swollen with Supercritical Gases
    • Garg A., Gulari, E. and Manke C.W., Thermodynamics of Polymer Melts Swollen with Supercritical Gases, Macromolecules, 27, 5643-5653, 1994.
    • (1994) Macromolecules , vol.27 , pp. 5643-5653
    • Garg, A.1    Gulari, E.2    Manke, C.W.3
  • 58
    • 0022865134 scopus 로고
    • A Fundamental Study of Polymer Melt Devolatilization: II, A Theory for Foam-Enhanced DV
    • Biesenberger, J.A. and Lee, S.T., A Fundamental Study of Polymer Melt Devolatilization: II, A Theory for Foam-Enhanced DV, 44th SPE ANTEC preprint, 846, 1986.
    • (1986) 44th SPE ANTEC preprint , pp. 846
    • Biesenberger, J.A.1    Lee, S.T.2
  • 61
    • 33745614956 scopus 로고    scopus 로고
    • Foaming Agents for Foam Extrusion
    • Lee, S.T., Ed., CRC Press (ex Technomic)
    • Pontiff, T., Foaming Agents for Foam Extrusion, in Foam Extrusion, Lee, S.T., Ed., CRC Press (ex Technomic), 2000, chap. 10.
    • (2000) in Foam Extrusion , vol.10
    • Pontiff, T.1
  • 63
  • 64
    • 85122716905 scopus 로고
    • Process for the Preparation of Closed-Cellular Shaped Products of Olefin Polymers Using a Mixture of Citric Acid Salt and a Carbonate or Bicarbonate as the Nucleating Agent
    • U.S. Patent 3,808,300
    • Miyamoto, A., Akiyama, H. and Usunda, Y., Process for the Preparation of Closed-Cellular Shaped Products of Olefin Polymers Using a Mixture of Citric Acid Salt and a Carbonate or Bicarbonate as the Nucleating Agent, U.S. Patent 3, 808, 300, 1974.
    • (1974)
    • Miyamoto, A.1    Akiyama, H.2    Usunda, Y.3
  • 66
    • 1542576995 scopus 로고    scopus 로고
    • Rheology of Thermoplastic Foam Extrusion Process
    • Lee, S. T., Ed. CRC Press (ex Technomic)
    • Gendron, R. and Daigneault, L.E., Rheology of Thermoplastic Foam Extrusion Process, in Foam Extrusion, Lee, S. T., Ed. CRC Press (ex Technomic), 2000, chap. 10.
    • (2000) in Foam Extrusion , vol.10
    • Gendron, R.1    Daigneault, L.E.2
  • 67
    • 85056031033 scopus 로고    scopus 로고
    • Statistical Thermodynamics of Gas Solubility in Polymers
    • Lee, S.T., Ed., CRC Press (ex Technomic)
    • Simha, R. and Moulinie, P., Statistical Thermodynamics of Gas Solubility in Polymers, in Foam Extrusion, Lee, S.T., Ed., CRC Press (ex Technomic), 2000, chap. 2.
    • (2000) in Foam Extrusion , vol.2
    • Simha, R.1    Moulinie, P.2
  • 68
    • 0001320112 scopus 로고    scopus 로고
    • Free Volume and Viscosity of Polymer-Compressed Gas Mixtures during Extrusion Foaming
    • Utraki, L.A. and Simha, R., Free Volume and Viscosity of Polymer-Compressed Gas Mixtures during Extrusion Foaming, J. Polym. Sci. B: Polym. Phys., 39, 342-362, 2001
    • (2001) J. Polym. Sci. B: Polym. Phys. , vol.39 , pp. 342-362
    • Utraki, L.A.1    Simha, R.2
  • 69
    • 84973740922 scopus 로고
    • Rheological Properties of Gas-Containing Thermoplastic Materials during Extrusion
    • Fridman, M.L., Sabsai, O.Y., Nikolaeva, N.E. and Barshtein, G.R., Rheological Properties of Gas-Containing Thermoplastic Materials during Extrusion, J. Cell. Plas, 25, 574-595, 1989.
    • (1989) J. Cell. Plas , vol.25 , pp. 574-595
    • Fridman, M.L.1    Sabsai, O.Y.2    Nikolaeva, N.E.3    Barshtein, G.R.4
  • 70
    • 85122716163 scopus 로고    scopus 로고
    • video in Polym. Proc. Inst. at New Jersey Institute of Technology
    • Todd, D. and Subir, D., Visulization of Foam Processing, video in Polym. Proc. Inst. at New Jersey Institute of Technology, 1998.
    • (1998) Visulization of Foam Processing
    • Todd, D.1    Subir, D.2
  • 71
    • 85122718028 scopus 로고    scopus 로고
    • Novel Method for Measuring the Extensional Viscosity of PE with Blowing Agent and Its Impact on Foams, Foams 2002
    • Houston
    • Ramesh, N.S., Lee, S.T. and Lee, K., Novel Method for Measuring the Exten- sional Viscosity of PE with Blowing Agent and Its Impact on Foams, Foams 2002, SPE, 113-120, Houston, 2002.
    • (2002) SPE , pp. 113-120
    • Ramesh, N.S.1    Lee, S.T.2    Lee, K.3
  • 72
    • 0028056475 scopus 로고
    • Effect of Physical Blowing Agents on Crystallization Temperature of Polymer Melts
    • Soc. Plas. Eng.
    • Dey, S.K., Jacob, C., and Biesenberger, J.A., Effect of Physical Blowing Agents on Crystallization Temperature of Polymer Melts, Annu. Tech. (ANTEC) Conf. Proc., 2197-2198, Soc. Plas. Eng., 1994.
    • (1994) Annu. Tech. (ANTEC) Conf. Proc. , pp. 2197-2198
    • Dey, S.K.1    Jacob, C.2    Biesenberger, J.A.3
  • 73
    • 0342869049 scopus 로고
    • Kinetics of Phase Change. I
    • Avrami, M., Kinetics of Phase Change. I, J. Chem. Phys., 1103, 1939.
    • (1939) J. Chem. Phys. , pp. 1103
    • Avrami, M.1
  • 75
    • 84986749908 scopus 로고
    • An Approach to Phase Behavior
    • Keller, A., An Approach to Phase Behavior, Macromol. Symp., 98, 1-42, 1995.
    • (1995) Macromol. Symp. , vol.98 , pp. 1-42
    • Keller, A.1
  • 77
    • 85122716044 scopus 로고
    • Ph.D. thesis, Mech. Engr. Dept., Massachussetts Institute of Technology
    • Park, C.B., Ph.D. thesis, Mech. Engr. Dept., Massachussetts Institute of Technology, 1993.
    • (1993)
    • Park, C.B.1
  • 79
    • 85122718033 scopus 로고
    • Ph.D. thesis, Chem. Engr. Dept., University of Maryland
    • Connahan, V.D., Ph.D. thesis, Chem. Engr. Dept., University of Maryland, 1971.
    • (1971)
    • Connahan, V.D.1
  • 80
    • 0023331975 scopus 로고
    • Long-Term Thermal Resistance Values of Cellular Plastic Insulations
    • Kabayama, M.A., Long-Term Thermal Resistance Values of Cellular Plastic Insulations, J. Ther. Insu., 10, 286-300, 1987.
    • (1987) J. Ther. Insu. , vol.10 , pp. 286-300
    • Kabayama, M.A.1
  • 82
    • 84964163859 scopus 로고
    • Thermal Conductivity and Life of Polymer Foams
    • Norton, F.J., Thermal Conductivity and Life of Polymer Foams, J. Cellu. Plas., 23-37, 1967.
    • (1967) J. Cellu. Plas. , pp. 23-37
    • Norton, F.J.1
  • 83
    • 85122715960 scopus 로고
    • Expandable Polyolefin Compositions and Preparation Process Utilizing Isobutane Blowing Agent
    • Park, C.P., Expandable Polyolefin Compositions and Preparation Process Utilizing Isobutane Blowing Agent, U.S. Patent 4, 640, 933, 1987.
    • (1987) U.S. Patent 4 , vol.640 , pp. 933
    • Park, C.P.1
  • 84
    • 85056026268 scopus 로고    scopus 로고
    • Dimensional Stability Analysis of Foams Based on LDPE and Ethylene-Styrene Interpolymer Blends
    • Yang, C.T. and Lee, S.T., Dimensional Stability Analysis of Foams Based on LDPE and Ethylene-Styrene Interpolymer Blends, 60th SPE ANTEC preprints 1782-1786, 2002.
    • (2002) 60th SPE ANTEC preprints , pp. 1782-1786
    • Yang, C.T.1    Lee, S.T.2
  • 85
    • 85122714622 scopus 로고
    • Extrusion Process for Polyolefin Foam
    • Cronin, E. W., Extrusion Process for Polyolefin Foam, U.S. Patent 3, 644, 230, 1972.
    • (1972) U.S. Patent 3 , vol.644 , pp. 230
    • Cronin, E.W.1
  • 88
    • 85122717520 scopus 로고    scopus 로고
    • RAPRA Tech. Ltd.
    • Eaves, D., Polymer Foams, RAPRA Tech. Ltd., 2001, chap. 2.
    • (2001) Polymer Foams , vol.2
    • Eaves, D.1
  • 91
    • 85122717763 scopus 로고
    • Process for the Preparation of Low Density Microcellular Foam Sheets Exhibiting High Work-to-Tear Values
    • Parrish, R.G., Process for the Preparation of Low Density Microcellular Foam Sheets Exhibiting High Work-to-Tear Values, US Patent 3, 787, 543, 1974.
    • (1974) US Patent 3 , vol.787 , pp. 543
    • Parrish, R.G.1
  • 93
    • 0026155704 scopus 로고
    • Dynamics of (Micro)Phase Separation During Fast, Bulk Copolimerisation: Some Synchrotron Small-Angle X-Ray Scattering Experiments (On Bulk Formation of a Copolyurethane)
    • Ryan, A.J., Willkomm, W.R., Bergstrom, T.B., Macosko, C.W., Koberstein, J.T., Yu, C.C. and Russel, T.P., Dynamics of (Micro)Phase Separation During Fast, Bulk Copolimerisation: Some Synchrotron Small-Angle X-Ray Scattering Experiments (On Bulk Formation of a Copolyurethane), Macrom., 24, 10, 2883-2889, 1991.
    • (1991) Macrom. , vol.24 , Issue.10 , pp. 2883-2889
    • Ryan, A.J.1    Willkomm, W.R.2    Bergstrom, T.B.3    Macosko, C.W.4    Koberstein, J.T.5    Yu, C.C.6    Russel, T.P.7
  • 94
    • 0347516625 scopus 로고
    • Crystallization and Morphology of Binary Blends of Linear and Branched Polyethylene
    • Gedde, U.W., Crystallization and Morphology of Binary Blends of Linear and Branched Polyethylene, Progr. Colloid Polym. Sci., 87, 8-15, 1992.
    • (1992) Progr. Colloid Polym. Sci. , vol.87 , pp. 8-15
    • Gedde, U.W.1
  • 95
    • 85056349744 scopus 로고    scopus 로고
    • FoamTech, Canadian National Research Council, Dec
    • Utracki, L.A., Foaming Polymer Blend, FoamTech, Canadian National Research Council, Dec., 1998.
    • (1998) Foaming Polymer Blend
    • Utracki, L.A.1
  • 96
    • 85122717321 scopus 로고
    • Process for Producing Prefoamed Polymer Particles
    • Yoshimura, S. and Kuwabara, H., Process for Producing Prefoamed Polymer Particles, U.S. Patent 4, 464, 484, 1984.
    • (1984) U.S. Patent 4 , vol.464 , pp. 484
    • Yoshimura, S.1    Kuwabara, H.2
  • 97
    • 85122715382 scopus 로고    scopus 로고
    • Expanded Polypropylene Resin Beads and A Molded Article
    • Sasaki, H., Sakaguchi, M., Akiyama, M. and Tokoro, H., Expanded Polypropylene Resin Beads and A Molded Article, U.S. Patent 6, 313, 184, 2001.
    • (2001) U.S. Patent 6 , vol.313 , pp. 184
    • Sasaki, H.1    Sakaguchi, M.2    Akiyama, M.3    Tokoro, H.4
  • 99
    • 0344914536 scopus 로고    scopus 로고
    • A Fundamental Study of Foam Devolatilization
    • Albalak, R.J., Ed., Marcel Dekker, Inc., New York
    • Lee, S.T., A Fundamental Study of Foam Devolatilization, in Polymer Devolatilization, Albalak, R.J., Ed., Marcel Dekker, Inc., New York, 1996, chap. 6.
    • (1996) in Polymer Devolatilization , vol.6
    • Lee, S.T.1
  • 100
    • 0016551783 scopus 로고
    • Bubble Nucleation in Liquids
    • Blander, M. and Katz, J.L., Bubble Nucleation in Liquids, AIChE J., 21, 5, 833-848, 1975.
    • (1975) AIChE J. , vol.21 , Issue.5 , pp. 833-848
    • Blander, M.1    Katz, J.L.2
  • 102
    • 0023327031 scopus 로고
    • The Nucleation of Microcellular Foam with Additives, I: Theoretical Considerations
    • Colton, J.S. and Suh, N.P., The Nucleation of Microcellular Foam with Additives, I: Theoretical Considerations, Polym. Eng. Sci., 27, 485-503, 1987.
    • (1987) Polym. Eng. Sci. , vol.27 , pp. 485-503
    • Colton, J.S.1    Suh, N.P.2
  • 103
    • 0025415373 scopus 로고
    • Bubble Nucleation in Polymeric Liquids, I: Bubble Nucleation in Concentrated Polymer Solutions
    • Han, J.H. and Han, C.D., Bubble Nucleation in Polymeric Liquids, I: Bubble Nucleation in Concentrated Polymer Solutions, J. Polym. Sci. B: Polym. Phys., 28, 711, 1990.
    • (1990) J. Polym. Sci. B: Polym. Phys. , vol.28 , pp. 711
    • Han, J.H.1    Han, C.D.2
  • 105
    • 0025414855 scopus 로고
    • Bubble Nucleation in Polymeric Liquids II. Theoretical Considerations
    • Han, J.H. and Han, C.D., Bubble Nucleation in Polymeric Liquids II. Theoretical Considerations, J. Polym. Sci., B: Polym. Phys., 28, 743-761, 1990.
    • (1990) J. Polym. Sci., B: Polym. Phys. , vol.28 , pp. 743-761
    • Han, J.H.1    Han, C.D.2
  • 108
    • 85122716178 scopus 로고    scopus 로고
    • Visual Observation of Batch & Continuous Foaming Processes, Foams 2002
    • Houston
    • Taki, K., Yatsuzuka, T., Nakayama, T. and Ohshima, M., Visual Observation of Batch & Continuous Foaming Processes, Foams 2002, SPE, 141-151, Houston, 2002.
    • (2002) SPE , pp. 141-151
    • Taki, K.1    Yatsuzuka, T.2    Nakayama, T.3    Ohshima, M.4
  • 110
    • 0036608594 scopus 로고    scopus 로고
    • Shear Stress Nucleation in Microcellular Foaming Process
    • Chen, L., Wang, X., Straff, R. and Blizard, K., Shear Stress Nucleation in Microcellular Foaming Process, Polym. Eng. Sci., 42, 6, 1151-1158, 2002.
    • (2002) Polym. Eng. Sci. , vol.42 , Issue.6 , pp. 1151-1158
    • Chen, L.1    Wang, X.2    Straff, R.3    Blizard, K.4
  • 111
    • 0021499961 scopus 로고
    • A Study of the Dynamics of Foam Growth: Analysis of the Growth of Closely Spaced Spherical Bubbles
    • Amon, M. and Denson, C.D., A Study of the Dynamics of Foam Growth: Analysis of the Growth of Closely Spaced Spherical Bubbles, Polym. Eng. Sci., 24, 13, 1026-1034, 1984.
    • (1984) Polym. Eng. Sci. , vol.24 , Issue.13 , pp. 1026-1034
    • Amon, M.1    Denson, C.D.2
  • 112
    • 85122718200 scopus 로고    scopus 로고
    • Numerical and Experimental Studies of Bubble Growth During the Microcellular Foaming Process
    • Ramesh, N.S., Rasmussen, D.H., and Campbell, G.A., Numerical and Experimental Studies of Bubble Growth During the Microcellular Foaming Process, Polym. Eng. Sci., 31, 1999.
    • (1999) Polym. Eng. Sci. , pp. 31
    • Ramesh, N.S.1    Rasmussen, D.H.2    Campbell, G.A.3
  • 114
    • 0030386342 scopus 로고    scopus 로고
    • Gas Loss during Foam Sheet Formation
    • Lee, S.T. and Ramesh, N.S., Gas Loss during Foam Sheet Formation, Adv. Polym. Tech., 15, 297-305, 1996.
    • (1996) Adv. Polym. Tech. , vol.15 , pp. 297-305
    • Lee, S.T.1    Ramesh, N.S.2
  • 116
    • 0003814709 scopus 로고    scopus 로고
    • Foam Growth in Polymers
    • Lee, S.T., Ed., CRC Press (ex Technomic)
    • Ramesh, N.S., Foam Growth in Polymers, in Foam Extrusion, Lee, S.T., Ed., CRC Press (ex Technomic), 2000, chap. 5.
    • (2000) in Foam Extrusion , vol.5
    • Ramesh, N.S.1
  • 117
    • 0043090634 scopus 로고
    • Wiley-Interscience, New York
    • Benning, C.J., Plastics Foams Vol. II, Wiley-Interscience, New York, 1969.
    • (1969) Plastics Foams , vol.2
    • Benning, C.J.1
  • 118
    • 85122718173 scopus 로고    scopus 로고
    • Fundamental Foaming Mechanisms Governing Volume Expansion of Extruded PP Foams, Foams 2002
    • Naguib, H.E., Park, C.B., Yoon, E. and Reichelt, N., Fundamental Foaming Mechanisms Governing Volume Expansion of Extruded PP Foams, Foams 2002, Soc. Plas. Eng., 2002.
    • (2002) Soc. Plas. Eng.
    • Naguib, H.E.1    Park, C.B.2    Yoon, E.3    Reichelt, N.4
  • 119
    • 0030261173 scopus 로고    scopus 로고
    • Study of Thermoplastic Foam Sheet Formation
    • Lee, S.T., Study of Thermoplastic Foam Sheet Formation, Polym. Eng. Sci., 36, 19, 1996.
    • (1996) Polym. Eng. Sci. , vol.36 , pp. 19
    • Lee, S.T.1
  • 122
    • 85122717222 scopus 로고
    • Thermal Aging
    • Hilyard, N.C. and Cunningham, A., Eds., Chapman & Hall, London
    • Hoogendoom, C.J., Thermal Aging, in Low Density Cellular Plastics, Hilyard, N.C. and Cunningham, A., Eds., Chapman & Hall, London, 1994, chap. 6.
    • (1994) in Low Density Cellular Plastics , vol.6
    • Hoogendoom, C.J.1
  • 123
  • 124
    • 85122716902 scopus 로고
    • Extrusion Dies for the Discharge of a Single Melt
    • Hanser, Munich
    • Michaeli, W., Extrusion Dies for the Discharge of a Single Melt, in Extrusion Dies, Hanser, Munich, 1984, chap. 5.
    • (1984) in Extrusion Dies , vol.5
    • Michaeli, W.1
  • 125
    • 84938227243 scopus 로고    scopus 로고
    • Foam Extrusion Machinery Features
    • Lee, S.T., Ed., CRC Press (ex Technomic)
    • Thiele, W.C., Foam Extrusion Machinery Features, in Foam Extrusion, Lee, S.T., Ed., CRC Press (ex Technomic), 2000, chap. 8.
    • (2000) in Foam Extrusion , vol.8
    • Thiele, W.C.1
  • 130
    • 0035576672 scopus 로고    scopus 로고
    • Quantitative Relation Between Shear History and Rheological Properties of LDPE
    • Yamaguchi, M. and Gogos, C.G., Quantitative Relation Between Shear History and Rheological Properties of LDPE, Adv. Polym. Tech., 20, 4, 261-269, 2001.
    • (2001) Adv. Polym. Tech. , vol.20 , Issue.4 , pp. 261-269
    • Yamaguchi, M.1    Gogos, C.G.2
  • 133
    • 17744375379 scopus 로고    scopus 로고
    • Extruded Polyester Foams
    • Khemani, K.C., ACS, Ed., Symposium Series 669
    • Khemani, K.C., Extruded Polyester Foams, in Polymeric Foams, Khemani, K.C., ACS, Ed., Symposium Series 669, 1997, chap. 5.
    • (1997) in Polymeric Foams , vol.5
    • Khemani, K.C.1
  • 139
    • 85122716413 scopus 로고    scopus 로고
    • Foamed Particles of Propylene-Type Polymer
    • Yamada, H., Hosoda, S. and Ogawa, T., Foamed Particles of Propylene-Type Polymer, U.S. Patent 4, 766, 157, 1998.
    • (1998) U.S. Patent 4 , vol.766 , pp. 157
    • Yamada, H.1    Hosoda, S.2    Ogawa, T.3
  • 140
    • 85122716631 scopus 로고
    • PE-PS Polymer Alloy Foam
    • Indus. Tech. Reseach Inst., Taipei, Taiwan, ROC
    • Kitamori, Y., PE-PS Polymer Alloy Foam, in Proc. Thermoplastic Foams Technical Conf., Indus. Tech. Reseach Inst., Taipei, Taiwan, ROC, 1995.
    • (1995) in Proc. Thermoplastic Foams Technical Conf.
    • Kitamori, Y.1
  • 142
    • 85122715412 scopus 로고    scopus 로고
    • Nanoporous Interpenetrating Organic-Inorganic Networks
    • Sievers, W. and Zimmermann, A., Nanoporous Interpenetrating Organic-Inorganic Networks, U.S. Patent 6, 825, 260, 2004.
    • (2004) U.S. Patent 6 , vol.825 , pp. 260
    • Sievers, W.1    Zimmermann, A.2
  • 143
    • 0003591969 scopus 로고
    • The Morphology of Flexible Polyurethane Matrix Polymers
    • Hilyard, N.C. and Cunningham, A., Eds., Chapman & Hall, London
    • Priester, R.D. and Turner, R.B., The Morphology of Flexible Polyurethane Matrix Polymers, in Low Density Cellular Plastics, Hilyard, N.C. and Cunningham, A., Eds., Chapman & Hall, London, 1994, chap. 4.
    • (1994) in Low Density Cellular Plastics , vol.4
    • Priester, R.D.1    Turner, R.B.2
  • 146
    • 0036131812 scopus 로고    scopus 로고
    • Garboczi, Elastic Properties of Model Random Three-Dimensional Open-Cell Solids
    • Roberts, A.P. and Garboczi, Elastic Properties of Model Random Three-Dimensional Open-Cell Solids, J. Mech. Phys. Solids, 50, 1, 33-55, 2002.
    • (2002) J. Mech. Phys. Solids , vol.50 , Issue.1 , pp. 33-55
    • Roberts, A.P.1
  • 147
    • 0032206919 scopus 로고    scopus 로고
    • Low-Density, Microcellular Foam Processing in Extrusion Using CO2
    • Park, C.B., Behravesh, A.H. and Venter, R.D., Low-Density, Microcellular Foam Processing in Extrusion Using CO2, Polym. Eng. Sci., 38, 11, 1812-1823, 1998.
    • (1998) Polym. Eng. Sci. , vol.38 , Issue.11 , pp. 1812-1823
    • Park, C.B.1    Behravesh, A.H.2    Venter, R.D.3
  • 148
    • 85122715547 scopus 로고    scopus 로고
    • Heat Transfer Issues in Foam Extrusion
    • Todd, D. B., Heat Transfer Issues in Foam Extrusion, Foams RETEC.
    • Foams RETEC.
    • Todd, D.B.1
  • 150
    • 0036033247 scopus 로고    scopus 로고
    • Ethylene-Styrene Interpolymer Foam Blends: Mechanical Properties and Sport Applications
    • Ankrah, S., Verdejo, R., and Mills, N.J., Ethylene-Styrene Interpolymer Foam Blends: Mechanical Properties and Sport Applications, Cell. Polym., 21, 4, 2002.
    • (2002) Cell. Polym. , vol.21 , pp. 4
    • Ankrah, S.1    Verdejo, R.2    Mills, N.J.3
  • 152
    • 0001614514 scopus 로고
    • Heat Transfer in Foams
    • Hilyard, N.C. and Cunningham, A., Eds., Chapman & Hall, London
    • Glicksman, L.R., Heat Transfer in Foams, in Low Density Cellular Plastics, Hilyard, N.C. and Cunningham, A., Eds., Chapman & Hall, London, 1994, chap. 5.
    • (1994) in Low Density Cellular Plastics , vol.5
    • Glicksman, L.R.1
  • 153
    • 85122715122 scopus 로고    scopus 로고
    • Preparation of a Macrocellular Acoustic Foam
    • Subramonian, S., Burgun, S., Park C.P., Preparation of a Macrocellular Acoustic Foam, U.S. Patent 6, 720, 363, 2004.
    • (2004) U.S. Patent 6 , vol.720 , pp. 363
    • Subramonian, S.1    Burgun, S.2    Park, C.P.3
  • 155
    • 33646367686 scopus 로고    scopus 로고
    • Polymeric Foaming Simulation: Batch and Continuous
    • Lee, S.T., Ed., CRC Press (ex Technomic)
    • Oshima, M., Polymeric Foaming Simulation: Batch and Continuous, in Foam Extrusion, Lee, S.T., Ed., CRC Press (ex Technomic), 2000, chap. 6.
    • (2000) in Foam Extrusion , vol.6
    • Oshima, M.1
  • 156
    • 0025493708 scopus 로고
    • Polymer Melt Devolatilization Mechanisms
    • Alabak, R.J., Tadmor, Z. and Talmon, Y., Polymer Melt Devolatilization Mechanisms, AIChE J., 36, 9, 1313-1320, 1990.
    • (1990) AIChE J. , vol.36 , Issue.9 , pp. 1313-1320
    • Alabak, R.J.1    Tadmor, Z.2    Talmon, Y.3
  • 157
    • 85122716061 scopus 로고    scopus 로고
    • Acta Materiala
    • Roberts, A.P. and Garboczi, E.J., Acta Materiala, 49, 2, 189-197, 2001.
    • (2001) 49 , vol.2 , pp. 189-197
    • Roberts, A.P.1    Garboczi, E.J.2
  • 161
    • 85122718236 scopus 로고
    • Method for Accelerating Removal of Residual Blowing Agent from Extruded Flexible Foams
    • Lee, S.T. and Oiestad, A., Method for Accelerating Removal of Residual Blowing Agent from Extruded Flexible Foams, U.S. Patent 5, 411, 689, 1995.
    • (1995) U.S. Patent 5 , vol.411 , pp. 689
    • Lee, S.T.1    Oiestad, A.2
  • 162
    • 85122716033 scopus 로고    scopus 로고
    • Method for Providing Accelerated Release of a Blowing Agent from a Plastic Foam
    • Kolosowski, P.A., Method for Providing Accelerated Release of a Blowing Agent from a Plastic Foam, U.S. Patent 5, 585, 058, 1998.
    • (1998) U.S. Patent 5,585,058
    • Kolosowski, P.A.1
  • 163
    • 85122717448 scopus 로고    scopus 로고
    • Method of Forming Boards of Foam Polyolefin Using Needle Punching to Release Blowing Agent
    • Fiddelaers, M. and Swennen, L., Method of Forming Boards of Foam Polyolefin Using Needle Punching to Release Blowing Agent, U.S. Patent 5, 776, 390, 1998.
    • (1998) U.S. Patent 5 , vol.776 , pp. 390
    • Fiddelaers, M.1    Swennen, L.2
  • 165
    • 85122717652 scopus 로고
    • Method and Apparatus for Recovering Blowing Agent in Foam Production
    • Burt, J.G., and Franklin, B.M., Method and Apparatus for Recovering Blowing Agent in Foam Production, U.S. Patent 4, 531, 951, 1985.
    • (1985) U.S. Patent 4 , vol.531 , pp. 951
    • Burt, J.G.1    Franklin, B.M.2
  • 167
    • 0035909030 scopus 로고    scopus 로고
    • Rheological Properties and Foam Processability for Blends of Linear and Crosslinked Polyethylenes
    • Yamaguchi, M. and Suzuki, K., Rheological Properties and Foam Processability for Blends of Linear and Crosslinked Polyethylenes, J. Polym. Sci. B: Polym. Phys., 39, 2159-2167, 2001.
    • (2001) J. Polym. Sci. B: Polym. Phys. , vol.39 , pp. 2159-2167
    • Yamaguchi, M.1    Suzuki, K.2
  • 170
    • 0005703029 scopus 로고
    • Polystyrene and Structural Foam
    • Klempner, D. and Frisch, K.C., Eds., Hanser, Munich
    • Suh, K.W., Polystyrene and Structural Foam, in Polymeric Foams, Klempner, D. and Frisch, K.C., Eds., Hanser, Munich, 1991, chap. 8.
    • (1991) in Polymeric Foams , vol.8
    • Suh, K.W.1
  • 173
    • 85122715172 scopus 로고    scopus 로고
    • Polypropylene Foams
    • Karger-Kocsis J., Ed., Kluwer, Dordrecht, The Netherlands
    • Ratzsch, M., Bucka, H. and Panzer, U., Polypropylene Foams, in Polypropylene: An A-Z Reference, Karger-Kocsis J., Ed., Kluwer, Dordrecht, The Netherlands, 1999.
    • (1999) in Polypropylene: An A-Z Reference
    • Ratzsch, M.1    Bucka, H.2    Panzer, U.3
  • 175
    • 0036647679 scopus 로고    scopus 로고
    • Strategies for Achieving Ultra Low-Density PP Foams
    • Naguib, H.E., Park, C.B., Panzer, U. and Reichelt, N., Strategies for Achieving Ultra Low-Density PP Foams, Polym. Eng. Sci., 42, 7, 1481-1492, 2002.
    • (2002) Polym. Eng. Sci. , vol.42 , Issue.7 , pp. 1481-1492
    • Naguib, H.E.1    Park, C.B.2    Panzer, U.3    Reichelt, N.4
  • 176
    • 0037218998 scopus 로고    scopus 로고
    • Effect of Recycling on the Rheological Properties and Foaming Behaviors of Branched PP
    • Naguib, H.E., Wang, J., Park, C.B., Mukhopadhyay, A.K. and Reichelt, N., Effect of Recycling on the Rheological Properties and Foaming Behaviors of Branched PP, Cell. Polym, 22, 1, 1-22, 2003.
    • (2003) Cell. Polym , vol.22 , Issue.1 , pp. 1-22
    • Naguib, H.E.1    Wang, J.2    Park, C.B.3    Mukhopadhyay, A.K.4    Reichelt, N.5
  • 177
    • 85122715227 scopus 로고    scopus 로고
    • Crosslinked Foamable Composition of Silane-Grafted, essentially Linear Polyolefins Blended with PP
    • Feichtinger, K., Crosslinked Foamable Composition of Silane-Grafted, essentially Linear Polyolefins Blended with PP, U.S. Patent 5, 929, 129, 1999.
    • (1999) U.S. Patent 5 , vol.929 , pp. 129
    • Feichtinger, K.1
  • 181
    • 84878726953 scopus 로고    scopus 로고
    • Part I, Sherwood Technology Inc
    • Throne, J., Low-Density PET Foam, Part I, Sherwood Technology Inc., 1997.
    • (1997) Low-Density PET Foam
    • Throne, J.1
  • 182
    • 85122716204 scopus 로고
    • PVC Foams
    • Klempner, D. and Frisch, K.C., Eds., Hanser, Munich
    • Brathun, R. and Zingsheim, P., PVC Foams, in Polymeric Foams, Klempner, D. and Frisch, K.C., Eds., Hanser, Munich, 1991, chap. 10.
    • (1991) in Polymeric Foams , vol.10
    • Brathun, R.1    Zingsheim, P.2
  • 184
    • 0010895530 scopus 로고
    • Hollaway, L., Ed., Woodhead Publishing Ltd., Cambridge, U.K.
    • Handbook of polymer composites for engineers, Hollaway, L., Ed., Woodhead Publishing Ltd., Cambridge, U.K., 1994.
    • (1994) Handbook of polymer composites for engineers
  • 192
    • 0004033166 scopus 로고
    • Applied Science Publishers, Leicestershire, U.K.
    • Richardson, M.O.W., Polymer Engineering Composites, Applied Science Publishers, Leicestershire, U.K., 1977, pp. 35-42.
    • (1977) Polymer Engineering Composites , pp. 35-42
    • Richardson, M.O.W.1
  • 230
    • 85122716384 scopus 로고    scopus 로고
    • 3rd International Wood and Natural Fibre Composites Symposium
    • Zhang, W. and Bledzki, A.K., 3rd International Wood and Natural Fibre Composites Symposium, 19-20 Kassel, 33, 1-3, 2000.
    • (2000) 19-20 Kassel , vol.33 , pp. 1-3
    • Zhang, W.1    Bledzki, A.K.2
  • 268
    • 85122718058 scopus 로고    scopus 로고
    • Nolan-ITU, Oct.
    • Environment Australia, report, Nolan-ITU, Oct., 2002.
    • (2002)
  • 277
    • 16344386402 scopus 로고    scopus 로고
    • Production of starch foams by twin-screw extrusion: Effect of maleated poly(butylene adipate-co-terephthalate) as a compatibilizer
    • Nabar, Y., Raquez, J.M., Dubois, P. and Narayan, R., Production of starch foams by twin-screw extrusion: Effect of maleated poly(butylene adipate-co-tereph- thalate) as a compatibilizer, Biomacromolecules, 6 (2), 807-817, 2005.
    • (2005) Biomacromolecules , vol.6 , Issue.2 , pp. 807-817
    • Nabar, Y.1    Raquez, J.M.2    Dubois, P.3    Narayan, R.4
  • 278
    • 85122717815 scopus 로고    scopus 로고
    • Twin-Screw Extrusion Production and Characterization of Starch Foam Products for Use in Cushioning and Insulation Applications,
    • in press
    • Nabar, Y. and Narayan, R., Twin-Screw Extrusion Production and Characterization of Starch Foam Products for Use in Cushioning and Insulation Applications, Polym. Eng. Sci., in press, 2005.
    • (2005) Polym. Eng. Sci.
    • Nabar, Y.1    Narayan, R.2
  • 279
    • 85122716922 scopus 로고    scopus 로고
    • Physico-Mechanical and Hydrophobic Properties of Starch Foams Extruded with Different Biodegradable Polymers,
    • in press
    • Nabar, Y.U., Draybuck, D. and Narayan, R., Physico-Mechanical and Hydrophobic Properties of Starch Foams Extruded with Different Biodegradable Polymers, J. App. Polym. Sci., in press, 2005.
    • (2005) J. App. Polym. Sci.
    • Nabar, Y.U.1    Draybuck, D.2    Narayan, R.3
  • 280
    • 1542301339 scopus 로고    scopus 로고
    • Post-extrusion steaming of starch acetate foams,
    • Nov.-Dec.
    • Guan, J. and Hanna, M.A., Post-extrusion steaming of starch acetate foams, Trans. ASAE, 46 (6), 1613-1624, Nov.-Dec., 2003.
    • (2003) Trans. ASA , vol.46 , Issue.6 , pp. 1613-1624
    • Guan, J.1    Hanna, M.A.2
  • 281
    • 0033748743 scopus 로고    scopus 로고
    • Functional properties of polylactic acid starch-based loose-fill packaging foams
    • Nov.-Dec.
    • Fang, Q. and Hanna, M.A., Functional properties of polylactic acid starch-based loose-fill packaging foams, Cereal Chem., 77 (6), 779-783, Nov.-Dec., 2000.
    • (2000) Cereal Chem. , vol.77 , Issue.6 , pp. 779-783
    • Fang, Q.1    Hanna, M.A.2
  • 282
    • 0037849949 scopus 로고    scopus 로고
    • Well-controlled biodegradable nanocomposite foams: From microcellular to nanocellular
    • May 7
    • Fujimoto, Y., Ray, S.S., Okamoto, M., Well-controlled biodegradable nanocomposite foams: From microcellular to nanocellular, Macrom. Rapid Comm., 24 (7), 457-461, May 7, 2003.
    • (2003) Macrom. Rapid Comm. , vol.24 , Issue.7 , pp. 457-461
    • Fujimoto, Y.1    Ray, S.S.2    Okamoto, M.3
  • 285
    • 19844362947 scopus 로고    scopus 로고
    • Selected morphological and functional properties of extruded acetylated starch-Polylactic acid foams
    • Apr. 27
    • Guan, J. and Hanna, M.A., Selected morphological and functional properties of extruded acetylated starch-Polylactic acid foams, Ind. Eng. Chem. Res., 44 (9), 3106-3115, Apr. 27, 2005.
    • (2005) Ind. Eng. Chem. Res. , vol.44 , Issue.9 , pp. 3106-3115
    • Guan, J.1    Hanna, M.A.2
  • 286
    • 15544377243 scopus 로고    scopus 로고
    • Poly(lactic acid)/organoclay nanocomposites: Thermal, rheological properties and foam processing
    • Mar. 15
    • Di, Y.W., Iannace, S. and Di, M.E., Poly(lactic acid)/organoclay nanocomposites: Thermal, rheological properties and foam processing, J. Polym. Sci., Part B-Polym. Phys., 43 (6), 689-698, Mar. 15, 2005.
    • (2005) J. Polym. Sci., Part B-Polym. Phys. , vol.43 , Issue.6 , pp. 689-698
    • Di, Y.W.1    Iannace, S.2    Di, M.E.3
  • 287
    • 0141534261 scopus 로고    scopus 로고
    • Biodegradable polylactide and its nanocomposites: Opening a new dimension for plastics and composites
    • Sep. 22
    • Ray, S.S. and Okamoto, M., Biodegradable polylactide and its nanocomposites: Opening a new dimension for plastics and composites, Macrom. Rapid Comm., 24 (14), 815-840, Sep. 22, 2003.
    • (2003) Macrom. Rapid Comm. , vol.24 , Issue.14 , pp. 815-840
    • Ray, S.S.1    Okamoto, M.2
  • 288
    • 0034124199 scopus 로고    scopus 로고
    • In vitro and in vivo degradation of porous poly(DL-lactic-co-glycolic acid) foams
    • Sep.
    • Lu, L., Peter, S.J. and Lyman, M.D., In vitro and in vivo degradation of porous poly(DL-lactic-co-glycolic acid) foams, Biomaterials, 21 (18), 1837-1845, Sep., 2000.
    • (2000) Biomaterials , vol.21 , Issue.18 , pp. 1837-1845
    • Lu, L.1    Peter, S.J.2    Lyman, M.D.3
  • 289
    • 0002969423 scopus 로고    scopus 로고
    • Porous Biodegradable Polymeric Scaffolds prepared by Thermally Induced Phase Separation
    • Nam, Y.S. and Park, T.G., Porous Biodegradable Polymeric Scaffolds prepared by Thermally Induced Phase Separation, J. Biomed. Mater. Res., 47, 8-17, 1999.
    • (1999) J. Biomed. Mater. Res. , vol.47 , pp. 8-17
    • Nam, Y.S.1    Park, T.G.2
  • 290
    • 85122717800 scopus 로고    scopus 로고
    • Macroporous Poly(L-lactide) Scaffold 1. Preparation of a Macroporous Scaffold by Liquid-Liquid Phase Separation of a PLLA-dioxane-water system
    • Hua, F.J., Kim, G.E. and Lee, J.D., Macroporous Poly(L-lactide) Scaffold 1. Preparation of a Macroporous Scaffold by Liquid-Liquid Phase Separation of a PLLA-dioxane-water system, J. Biomed. Mater. Res., 2001.
    • (2001) J. Biomed. Mater. Res.
    • Hua, F.J.1    Kim, G.E.2    Lee, J.D.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.