Integrated building airflow simulation

Advanced Building Simulation

Volumn , Issue , 2004, Pages 87-118

  Hensen, Jan ^a  

^a EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85121888609     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.4324/9780203073674-10     Document Type: Chapter

References (54)

1. Allard, F. (ed.) (1998). Natural Ventilation in Buildings: A Design Handbook. James & James Science Publishers Ltd., London.
2. Andre, P. (1998). Personal communication.
3. Andre, P., Kummert, M., and Nicolas, J. (1998). “Coupling thermal simulation and airflow calculation for a better evaluation of natural ventilation strategies.” In Proceedings of the System Simulation in Buildings Conference. University of Liege, Belgium.
4. Axley, J.W. (1990). Massachusetts Institute of Technology, Cambridge, MA. Private communication.
5. Axley, J. and Grot, R.A. (1989). “The coupled airflow and thermal analysis problem in building airflow system simulation.” ASHRAE Transactions, Vol. 95, No. 2, pp. 621-628, American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.
6. Bartak, M., Drkal, F., Hensen, J.L.M., Lain, M., Matuska, T., Schwarzer, J., and Sourek, B. (2001). “Simulation to support sustainable HVAC design for two historical buildings in Prague. In Proceedings of the 18th Conference on Passive and Low Energy Architecture. PLEA 2001, November 7-9, Federal University of Santa Catarina, Florianopolis, Brazil, pp. 903-908.
7. Bartak, M., Beausoleil-Morrison, I., Clarke, J.A., Denev, J., Drkal, F., Lain, M., Macdonald, I.A., Melikov, A., Popiolek, Z., and Stankov, P. (2002). “Integrating CFD and building simulation.” Building and Environment, Vol. 37, No. 8, pp. 865-872.
8. Beausoleil-Morrison, I. (2000). “The adaptive coupling of heat and air flow modeling within dynamic whole-building simulation.” PhD thesis. University of Strathclyde, Glasgow, UK.
9. CEC (1989). “The PASSYS Project Phase 1. Subgroup Model Validation and Development Final Report 1986-1989.” 033-89-PASSYS-MVD-FP-017, Commission of the European Communities, DG XII of Science, Research and Development, Brussels. S.O/stergaard Jensen (ed.).
10. Chen, Q. (1997). “Computational fluid dynamics for HVAC: successes and failures.” ASHRAE Transactions, Vol. 103, No. 1, pp. 178-187, American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.
11. Chen, Q. and Srebic, J. (2000). “Application of CFD tools for indoor and outdoor environment design.” International Journal on Architectural Science, Vol. 1, No. 1, pp. 14-29.
12. Chen, Q. and Srebic, J. (2001). “How to verify, validate and report indoor environmental modeling CFD analysis.” ASHRAE report RP-1133, American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.
13. Clarke, J.A. (2001). Energy Simulation in Building Design, 2nd edition. Butterworth Heinemann, Oxford.
14. Clarke, J.A. and Hensen, J.L.M. (1991). “An approach to the simulation of coupled heat and mass flow in buildings.” In Proceedings of the 11th AIVC Conference on Ventilation System Performance. Belgirate (I) 1990, Vol. 2, pp. 339-354, IEA Air Infiltration and Ventilation Centre, Coventry (UK).
15. Clarke, J.A., Hensen, J.L.M., and Negrao, C.O.R. (1995). “Predicting indoor airflow by combining network, CFD, and thermal simulation.” In Proceedings of the 16th AIVC Conference “Implementing the Results of Ventilation Research.” Palm Springs, September, pp. 145-154, IEA Air Infiltration and Ventilation Centre, Coventry, UK.
16. COMIS Multizone airflow model: conjunction of multizone infiltration specialists, online available (accessed 23 September 2003).
17. CONTAMW Multizone airflow and contaminant transport analysis software, online available (accessed 23 September 2003).
18. Conte, S.D. and De Boor, C. (1972). Elementary Numerical Analysis: An Algorithmic Approach. Mc-Graw-Hill, New York.
19. Crouse, B., Krafczyk, M., Kuhner, S., Rank E., and van Treeck, C. (2002). “Indoor airflow analysis based on lattice Boltzmann methods.” Energy and Buildings, Vol. 34, No. 9, pp. 941-949.
20. Djunaedy, E., Hensen, J.L.M., and Loomans, M.G.L.C. (2002). “A strategy for integration of CFD in building design.” Roomvent 2002, Proceedings of 8th International Conference on Air Distribution in Rooms, pp. 363-396, Copenhagen.
21. Djunaedy, E., Hensen, J.L.M., and Loomans, M.G.L.C. (2003). “Towards external coupling of building energy and airflow modeling programs.” ASHRAE Transactions, Vol. 102, No. 2, American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.
22. Dorer, V. and Weber, A. (1997). “Multizone air flow model COMVEN-TRNSYS, TRNSYS Type 157.” IEA-ECB Annex 23 report, EMPA, Swiss Federal Laboratories for Materials Testing and Research.
23. Dorer, V. and Weber, A. (1999). “Air, Contaminant and Heat Transport Models: Integration and Application.” Energy and Buildings, Vol. 30, No. 1, pp. 97-104. ESP-r Integrated building performance simulation tool, online available (accessed 23 September 2003).
24. Etheridge, D.W. and Sandberg, M. (1996). Building Ventilation: Theory and Measurement. John Wiley & Sons Ltd., Chichester, England.
25. Fuhrbringer, J.-M. and Roulet, C.-A. (1999). “Confidence of simulation results: put a sensitivity analysis module in your MODEL: the IEA-ECBCS Annex 23 experience of model evaluation.” Energy and Buildings, Vol. 30, No. 1, pp. 61-71.
26. Grabe, J. von, Lorenz, R., and Croxford, B. (2001). “Ventilation of double facades.” In Proceedings of the Building Simulation 2001. Rio de Janeiro, pp. 229-236, International Building Performance Simulation Association.
27. Haghighat, F., Wang, J.C.Y., Jiang, Z., and Allard, F. (1992). “Air movement in buildings using computational fluid dynamics.” Transactions of the ASME Journal of Solar Energy Engineering, Vol. 114, pp. 84-92.
28. Heidt, F.D. and Nayak, J.K. (1994). “Estimation of air infiltration and building thermal performance.” Air Infiltration Review, Vol. 15, No. 3, pp. 12-16.
29. Hensen, J.L.M. (1990). “ESPmfs, a building & plant mass flow network solver.” Collaborative FAGO/ESRU report 90.14.K, Eindhoven University of Technology.
30. Hensen, J.L.M. (1991). “On the thermal interaction of building structure and heating and ventilating system.” Doctoral dissertation. Technische Universiteit Eindhoven, Netherlands.
31. Hensen, J.L.M. (1994). “Predictive modelling of air humidity in Glasgow’s Peoples Palace.” ESRU Report R94/20, University of Strathclyde, Energy Systems Research Unit.
32. Hensen, J.L.M. (1995). “Modelling coupled heat and airflow: ping-pong vs onions.” In Proceedings of the 16th AIVC Conference “Implementing the Results of Ventilation Research.” Palm Springs, September, pp. 253-262, IEA Air Infiltration and Ventilation Centre, Coventry (UK).
33. Hensen, J.L.M. (1999a). “Simulation of building energy and indoor environmental quality-some weather data issues.” In Proceedings of the International Workshop on Climate Data and Their Applications in Engineering. 4-6 October, Czech Hydrometeorological Institute in Prague.
34. Hensen, J.L.M. (1999b). “A comparison of coupled and de-coupled solutions for temperature and air-flow in a building.” ASHRAE Transactions, Vol. 105, No. 2, pp. 962-969, American Society of Heating, Refrigerating, and Air-Conditioning Engineers.
35. Hensen, J.L.M., Hamelinck, M.J.H., and Loomans, M.G.L.C. (1996). “Modelling approaches for displacement ventilation in offices.” In Proceedings of the 5th International Conference Roomvent '96. Yokohama, July 1996, University of Tokyo.
36. Hensen, J.L.M., Bartak, M., and Drkal, F. (2002). “Modeling and simulation of a double-skin façade system.” ASHRAE Transactions, Vol. 108, No. 2, pp. 1251-1259, American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.
37. Jiang, Y. and Chen, Q. (2001). “Study of natural ventilation I buildings by large eddy simulation.” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 89, pp. 1155-1178.
38. Kafetzopoulos, M.G. and Suen, K.O. (1995). “Coupling of thermal and airflow calculation programs offering simultaneous thermal and airflow analysis.” Building Services Engineering Research and Technology, Vol. 16, pp. 33-36.
39. Kendrick, J. (1993). “An overview of combined modelling of heat transport and air movement.” Technical Note AIVC 30, Air Infiltration and Ventilation Centre, Coventry UK.
40. Kleijnen, J.P.C. (1997). “Sensitivity analysis and related analyses: a review of some statistical techniques.” Journal of Statistical Computation and Simulation, Vol. 57, pp. 111-142.
41. Liddament, M. (1986). “Air infiltration calculation techniques-an applications guide.” IEA Air Infiltration and Ventilation Centre, Coventry (UK).
42. Lomas, K.J. and Eppel, H. (1992). “Sensitivity analysis techniques for building thermal simulation programs.” Energy and Buildings, Vol. 19, pp. 21-44.
43. MacDonald, I.A. (2002). “Quantifying the effects of uncertainty in building simulation.” PhD thesis. University of Strathclyde, Glasgow, Scotland.
44. Martin, P. (1999). “CFD in the real world.” ASHRAE Journal, Vol. 41, No. 1, pp. 20-25.
45. Negrao, C.O.R. (1995). “Conflation of computational fluid dynamics and building thermal simulation.” PhD thesis. University of Strathclyde, Glasgow.
46. Orme, M. (1999). “Applicable models for air infiltration and ventilation calculations.” IEA Air Infiltration and Ventilation Centre, Technical Report 51, Birmingham, UK.
47. Slater, S. and Cartmell, B. (2003). “Hard working software.” Building Services Journal, Vol. 25, No. 2, February, pp. 37-40.
48. Strigner, R. and Janak, M. (2001). “Computer simulation of ventilated double-skin façade of the metropolitan library in Brno.” In Proceedings of the 1st International Conference on Renewable Energy in Buildings. Sustainable Buildings and Solar Energy 2001, Brno, 15-16 November, Brno University of Technology Czech Academy of Sciences in Prague, pp. 134-137.
49. TRNSYS Transient systems simulation program, online available (accessed 23 September 2003).
50. Walton, G.N. (1989a). “Airflow network models for element-based building airflow modeling.” ASHRAE Transactions, Vol. 95, No. 2, pp. 613-620, American Society of Heating, Refrigerating, and Air Conditioning Engineers, Atlanta, GA.
51. Walton, G.N. (1989b.) “AIRNET-a computer program for building airflow network modeling.” NISTIR 89-4072, National Institute of Standards and Technology, Gaithersburg, MD.
52. Walton, G.N. (1990). National Institute of Standards and Technology, Gaithersburg, MD. Private Communication.
53. De Wit, M.S. (2001). “Uncertainty in predictions of thermal comfort in buildings.” PhD thesis. Technische Universiteit Delft, Netherlands.
54. Zhai, Z., Chen, Q., Haves, P., and Klems, J.H. (2002). “On approaches to couple energy simulation and CFD programs.” Building and Environment, Vol. 37, No. 8, pp. 857-864.