Seismic retrofit with discontinuous slurry infiltrated mat concrete (SIMCON) jackets

American Concrete Institute, ACI Special Publication

Volumn SP-185, Issue , 2000, Pages 141-185

  Krstulovic Opara, N ^a   LaFave, J M ^b   Dogan, E ^a   Uang, C M ^c  

^a North Carolina State University   (United States)

^b University of Massachusetts Amherst   (United States)

^c UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

Composite materials; Concretes; Construction materials; Metal fibers; Slurry

Indexed keywords

DUCTILITY; EARTHQUAKE ENGINEERING; FIBER REINFORCED MATERIALS; GLASS CERAMICS; REINFORCED CONCRETE; RETROFITTING; TENSILE STRENGTH;

ACTIVE AREA; COMPOSITES MATERIAL; CONVENTIONAL FIBERS; FIBER-REINFORCED CONCRETES; HIGH-PERFORMANCE FIBER REINFORCED CONCRETES; LABORATORY STUDIES; METAL FIBERS; REINFORCED CONCRETE STRUCTURES; RETROFIT TECHNIQUES; SEISMIC RETROFITS;

FIBERS;

EID: 85116358678     PISSN: 01932527     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (109)

1. I. Krstulovic-Opara, N., and Malak, S., "Tensile Behavior of Slurry Infiltrated Mat Concrete (SIMCON)," ACI Materials Journal, January-Februaryl997, pp. 39-46.
2. Krstulovic-Opara, N., and Malak, S., "Micromechanical Tensile Behavior of Slurry Infiltrated Fiber Mat Concrete (SIMCON)," ACI Materials Journal, Vol. 94, September-October 1997, pp. 373-384.
3. Krstulovic-Opara, N.; Dogan, E.; Uang, C.-M.; and Haghayeghi, A., "Flexural Behavior of Composite R.C. - Slurry Infiltrated Fiber-Mat Concrete (SIMCON) Beams," ACI Structural Journal, Vol. 94, September-October 1997, No. 5, pp. 502-512.
4. Bayasi, M. Z., and Zeng, J., "Flexural Behavior of Slurry Infiltrated Mat Concrete (SIMCON)," ASCE Journal of Materials in Civil Engineering, Vol. 9, No.4.
5. Krstulovic-Opara, N., and Al-Shannag, M. J., "Slurry Infiltrated Mat Concrete (SIMCON)- Based Shear Retrofit of Reinforced Concrete Members," Accepted for Publication in the ACI Structural Journal, 1997.
6. Krstulovic-Opara, N., and Al-Shannag, M. J., "Compressive Behavior of Slurry Infiltrated Mat Concrete (SIMCON)," Under Review for the ACI Structural Journal, 1998.
7. Naaman, A. E., and Harajli, M. H., "Mechanical Properties of High Performance Concretes," Strategic Highway Research Program, National Research Council, 1990, SHRP-C/WP-90-004.
8. Shah, S. P., "Theoretical Models for Predicting the Performance of Fiber Reinforced Concretes," Journal of Ferrocement, Vol. 18, No.3, July 1988, pp. 263-284.
9. Naaman, A. E., "SIFCON: Tailored Properties for Structural Performance," High Performance Fiber Reinforced Cement Composites, Reinhardt, H.W. and Naaman, A.E., editors ed. E & FN Spon; 1992, pp. 18-38.
10. I0. Kosa, K.; Naaman, A. E.; and Hansen, W., "Durability of Fiber Reinforced Concrete and SIFCON," ACI Materials Journal, May-June 1991, pp. 310-319.
11. Krstulovic-Opara, N. and Toutanji, H., "Infrastructural Repair and Retrofit Using High Performance Fiber Reinforced Cement Composites," High Performance Fiber Reinforced Cement Composite, Naaman, A.E and Reinhardt, 1-I.W., editors ed. E. & F. Spon, Vol. 2, Chapter II, 1995, pp. 367-386.
12. Hackman, L. E.; Farrell, M. B.; and Dunham, 0. 0., "Slurry Infiltrated Mat Concrete (SIMCON)," Concrete International, December 1992, pp. 53-56.
13. Lankard, D. R., "Slurry Infiltrated Fiber Concrete (SIFCON): Properties and Applications," Young, J. F. and Mindess, S. "Potential for Very High Strength Cement Based Materials;" Proceedings of Material Research Society 1984 Fall Meeting, 1984, pp. 277-286.
14. Schneider, B., "Design Criteria for Fragment Resistant SIFCON Panels," New Mexico Research Institute, Albuquerque, February 1988, Report NMERI-31, Task Report for the Naval Civil Engineering Laboratory, Port Hueneme, California.
15. Schneider, B., "Development of SIFCON Through Applications," High Performance Fiber Reinforced Cement Composites, Reinhardt, H.W. and Naaman, A.E., editors ed. E & FN Spon, 1992, pp. 177-194.
16. Mondragon, R., and Schneider, B., "Interstate Highway Bridge Beam Repair With SIFCON," New Mexico Research Institute, Albuquerque, Octoiber 1986, NMERI-43.
17. Soubra, K. S.; Wight, J. K.; and Naaman, A. E., "Fiber Reinforced Concrete Joints for Precast Construction in Seismic Areas," Department of Civil and Environmental Engineering, The University of Michigan, Ann Arbor, Januaryl992, Report No. UMCEE92-2.
18. Naaman, A. E.; Reinhardt, H. W.; and Fritz, C., "Reinforced Concrete Beams with a SIFCON Matrix," ACI Structural Journal, January-February 1992, pp. 79-88.
19. Krstulovic-Opara, N.; Ahmad, S.; and Zia, P., "High Performance Composite lnfrastructural Systems Utilizing Advanced Cementitious Composites," NSF - Earthquake Hazard Mitigation, US-Japan Cooperative Research Program, 1996.
20. Vasconez, R. M.; Naaman, A. E.; and Wight, J. K., "Behavior of Fiber Reinforced Connections for Precast Frames Under Reversed Cyclic Loading," Department of Civil and Environmental Engineering, The University of Michigan, Ann Arbor; 1997, Repmi Number UMCEE 97-2.
21. Olariu, 1.; loani, A. M.; Poienar, N.; and Cociardi, M., "Seismic Behavior of Steel Fiber Concrete Beam-Column," Tenth World Conference on Earthquake Engineering, 1992, Madrid, Spain, pp. 3169-3174.
22. Gefken, P.R., and Ramey, M. R., "Increased Hoop Spacing in Type 2 Seismic Joints Using Fiber Reinforced Concrete," ACI Structural Journal, March-April 1989, pp. 168-172.
23. Jindal, R., and Hassan, K., "Behavior of Joints Using Reinforced Fibrous Concrete," Symposium on Fiber Reinforced Concrete, American Concrete Institute, Detroit, 1984, pp. 107-123.
24. Craig, R.; Mahhader, S.; Patel, C.; Viteri, M.; and Kertesz, C., "Behavior of Joints Using Reinforced Fibrous Concrete," ACI Special Publication, SP - 81, "Fiber Reinforced Concrete", ACI, Detroit, 1984.
25. Sood, V., and Gupta, S., "Behavior of Steel Fibrous Concrete Beam-Column Connections," Fiber Reinforced Concrete - Properties and Applications, ACI, Detroit, 1987, pp. 437-474.
26. Jindal, R. and Sharma, V., "Behavior of Steel Fiber Reinforced Concrete Knee-Type Beam-Column Connections," ACI Special Publication, SP - 1OS, "Fiber Reinforced Concrete- Properties and Applications", ACI, Detroit, 1987, pp. 475-491.
27. Zargari, R., "Experimental Study of the Behavior of Fibrous Reinforced Concrete Joints Under Cyclic Loads," University ofCalifornia, Davis; 1982.
28. Henager, C. H., "Steel Fibrous, Ductile Concrete Joints for Seismic-Resistant Structures," Reinforced Concrete Structures in Seisemic Zones, ACI Special Publication, SP-53, American Concrete Institute, Detroit, 1977, pp. 371-386.
29. Katzensteiner, B.; Mindess, S.; Filiatrault, A.; Nathan, N.D.; and Banthia, N., "Use of Steel Fiber Concrete in Seismic Design," Swamy, R. N. "Fiber Reinforced Cement and Concrete", July 1992, Sheffield, RILEM Symposium, pp. 613-628.
30. Lakshmipathy, M., and Santhakumar, A., "Experimental Verification of the Behavior of Reinforced Fibrous Concrete Frames Subjected to Seismic Type of Loading," Developments in Fiber Reinforced Cement and Concrete, Rilem Symposium, 1986, Sheffield, Britain.
31. Abdou, H. M.; Naaman, A. E.; and Wight, J. K., "Cyclic Response of Reinforced Concrete Connections Using Cast-in-Place SIFCON Matrix," Department of Civil Engineering, University of Michigan, Ann Arbor, August 1988, Report No. UMCE 88-8.
32. Englekirk, R. E., and Huang, S. C., "Strengthening of a Nonductile Concrete Frame to a Dynamic Response Criterion," ACI Structural Journal, May-June 1992, pp. 305-314.
33. Pcssiki, S. P.; Conley, C.; Gergely, P.; and White, R. N., "Seismic Behavior of Lightly-Reinforced Concrete Column and Beam-Column Joint Details," Department of Structural Engineering, School of Civil and Environmental Engineering, Cornell University, Ithaca, NY, 1990, Technical Report NCEER-90-00 14.
34. Beres, A.; White, R. N.; Gergely, P.; Pcssiki, S. P.; and EI-Attar, A., "Behavior of Existing Non-Seismically Detailed Reinforced Concrete Frames," Tenth World Conference on Earthquake Engineering, 1992, Madrid, Spain, pp. 3359-3363.
35. El-Attar, A.; White, R.N.; Gergely, P.; and Conley, C., "Shake Table Test of a 1/6 Scale 2-Story Lightly Reinforced Concrete Building," Fourth U.S. National Conference on Earthquake Engineering, May 1990, Palm Springs, California, pp. 767-776.
36. Rodriguez, M., "Techniques for Seismic Rehabilitation of Buildings in Mexico City," Ang, A. H-S. and Villaverde R. "Structural Engineering in Natural Hazards Mitigation," ASCE Structures Congress, April 19-21 1993, Irvine, California, 1993, pp. 235-240.
37. FEMA, "NEHRP Handbook for Seismic Rehabilitation of Existing Buildings," FEMA-172, Washington, D.C., June 1992.
38. Sugano, S.,and Endo, T., "Seismic Strengthening of Reinforced Concrete Buildings in Japan," Strengthening of Building Structures - Diagnosis and Theory, IABSE Symposium, 1983, pp. 371-378.
39. ACI Committee 369, "Seismic Repair and Rehabilitation," American Concrete Institute, 1997.
40. Makitani, E.; Yanagisawa, N.; Hayashi, M.; and Uchida, 1., "Mechanical Behavior of Composite RC Columns with Thin Section Precast GRC Panels," Fiber Reinforced Cement and Concrete: E. & F. N. Spon, 1992, pp. 586-600.
41. Jin, L.; Saadatmanesh, H., and Ehsani, M. R., "Seismic Retrofit of Existing Reinforced Concrete Coloumns by Glass-Fiber Composites," Infrastructure: New Materials and Methods of Repair, Proceedings of the ASCE Materials Engineering Conference, American Society of Civil Engineers, October 1994, pp. 758-763.
42. Masri, C. A., and Goel, S. C., "Seismic Design and Testing of an RC Slab-Column Frame Strengthened by Steel Bracing," Earthquake Spectra, Vol. 12, November 1996, pp. 645-666.
43. Badoux, M., and Jirsa, J., "Steel Bracing of RC Frames for Seismic Retrofitting," Journal of Structural Engineering, ASCE, Vol. 116, No. I, January 1990, pp. 55-74.
44. Hill, H., "Personal Communication," Wiss, Janney and Elstner Associates, Chicago, Illinois, 1997.
45. Beres, A.; EI-Borgi, S.; White, R. N.; and Gergely, P., "Experimental Results of Repaired and Retrofitted Beam-Column Joint Tests in I,ightly Reinforced Concrete Frame Buildings," Department of Structural Engineering, School of Civil and Environmental Engineering, Cornell University, Ithaca, NY, 1992, Technical Report NCEER-92-0025.
46. Corazao, M.; Durrani, A. J.; and Taylor, H., "Repair and Strengthening of Concrete Structures Damaged by Earthquakes," Ninth World Conference on Earthquake Engineering, August 2-9, 1988, Tokyo-Kyoto, Japan, pp. 389-394.
47. Teran, A., and Ruiz, J., "Reinforced Concrete Jacketing of Existing Structures," Tenth World Conference on Earthquake Engineering, Madrid, Spain, 1992, pp. 5107-5113.
48. Hayashi, T.; Niwa, H.; and Fukuhara, M., "The Strengthening Methods of the Existing Reinforced Concrete Buildings," Seventh World Conference on Earthquake Engineering, Istanbul, Turkey, 1980, pp. 89-96.
49. Seible, F., and Priestley, N., "Retrofit of Rectangular Flexural Columns with Composite Fiber Jackets," Second Annual Seismic Research Workshop, CALTRANS, 1993.
50. Chai, Y. H.; Priestley, M. J. N.; and Scible, F., "Seismic Retrofit of Circular Bridge Columns for Enhanced Flexural Performance," ACI Structural Journal, September-October 1991, pp. 572-584.
51. Sasaki, T.; Hattori, A.; Mori, N.; Nonaka, K.; and Suanega, T., "An Experimental Study on Earthquake Resistant Strengthening Work for Existing Reinforced Concrete Buildings," Proceedings of the Review Meeting of US-Japan Cooperative Program in Earthquake Engineering with Emphasis on Safety of School Buildings,Honolulu, I-11., August 1975, pp. 352-370.
52. Krause, L. G., and Wight J.K., "Strengthening of Reinforced Concrete Frame Structures," Proceedings of the Forth U.S. Conference on Earthquake Engineering, Vol. 3, May 20-24, 1990, pp. 373-382.
53. Choudhuri, D.; Mander, J.; and Reinhorn, A., "Evaluation of Seismic Retrofit of reinforced Concrete Frame Structures: Part I - Experimental Performance of Retrofitted Subassemblages," National Center for Earthquake Engineering Research, State University of New York at Buff:1lo, 1992, NCEER Technical Report No. 92-0030.
54. Stoppenhagen, D. R.; Jirsa, 0. J.; and Wyllie, L. A., "Seismic Repair and Strengthening of a Severely Damaged Concrete Frame," ACI Structural Journal, Vol. 92, March-Aprill995, pp. 177-187.
55. Ersoy, U.; Tankut, A. T.; and Suleiman, R., "Behavior of Jacketed Columns," ACI Structural Journal, May-June 1993, pp. 288-293.
56. Bracci, J. M.; Reinhorn, A.M.; and Mander, J. B., "Evaluation of Seismic Retrofit of Reinforced Concrete Frame Structures: Part II - Experimental Performance and Analytical Study of a Retrofitted Structural Model," Department of Structural Engineering, School of Civil and Environmental Engineering, Cornell University, Ithaca, NY, 1992, Technical Report NCEER-90-00 14.
57. Belt, 13.; Klingner, R.; and Jirsa, J., "Lateral Load Response of Strengthened and Repaired Reinforced Concrete Columns," ACI Structural Journal, Vol. 85, No.5, September-October 1988, pp. 499-508.
58. EI-Borgi, S.; White, R.N.; and Gergely, P., "Analytical Models for Seismic Retrofit of Ligthly-Reinforced Concrete Frame Buildings," Report #1 (of 3), School of Civil and Environmental Engineering, Cornell University, Ithaca, NY, 1991, NIST Project.
59. Ghobarah, A.; Aziz, T. S.; and Biddah, A., "Rehabilitation of Reinforced Concrete Frame Connections Using Corrugated Steel Jacketing," ACI Structural Journal, Vol. 4, May-June 1997, pp. 283-293.
60. Rodriguez, M., and Park, R., "Lateral Load Response of Reinforced Concrete Columns Strengthened by Jacketing," International Symposium on Earthquake Disaster Prevention, 1992.
61. Thewalt, C.R., and Stojadinovic, B., "Behavior of Bridge Outrigger Knee Joint Systems," Earthquake Spectra, Vol. II, No.3, August 1995, pp. 477-509.
62. Higashi, Y., and Kokusho, S., "The Strengthening Methods of Existing Reinforced Concrete Buildings," Proceedings of the Review Meeting of Us-Japan Cooperative Program in Earthquake Engineering with Emphasis on Safety of School Buildings, August 1975, Honolulu, HI., pp. 333-35 I.
63. Katsumata, H.; Kobatake, Y.; and Takeda, T., "A Study on Strengthening with Carbon Fiber for Earthquake-Resistant Capacity of Existing Reinforced Concrete Columns," Ninth World Conference on Emthquake Engineering, Vol. 7, 1988, Tokyo-Kyoto, Japan, pp. 517-522.
64. Priestley, M. J. N.; Seible, F.; and Fyfe, E., "Column Seismic Retrofit Using Fiberglass/Epoxy Jackets," Proceedings of Advanced Composite Materials in Bridges and Structures, Canadian Society for Civil Engineering, 1992, pp. 287-298.
65. Saadatmanesh, H.; Ehsani, M. R.; and Li, M. W., "Strength and Ductility of Concrete Columns Externally Reinforced with Fiber Composite Straps," ACI Structural Journal, Vol. 91, No.4, July-August 1994, pp. 434-447.
66. Picher, F.; Rochette, P.; and Labossiere, P., "Confinement of Concrete Cylinders with CFRP," Proceedings of the First International Conference Composites in Infrastructure, ICCI'96, University ofArizona, Tucson, Arizona, 1996, pp. 829-841.
67. Ricles, J. M.; Sause, R.; and Pessiki, S. P., "Seismic Rehabilitation of Non-Ductile Reinforced Concrete Columns Using Advanced Composite Jackets," Project Status Reports: Summary Document for Repair and Rehabilitation Research for Seismic Resistance of Structures, University of Texas at Austin, January\996, NSF Report R/R 1996.
68. Saadatmanesh, 1-1.; Ehsani, M. R.; and Jin, L., "Repair of Earthquake-Damaged RC Columns with FRP Wraps," ACI Structural Journal, Vol. 94, No. 2, March-April 1997, pp. 206-215.
69. Hawkins, G. F.; Patel, N. R.; Steckel, G. L.; and Sultan, M., "Failure Analysis of Highway Bridge Column Composite Overwraps," Proceedings of the First International Conference Composites in Infrastructure, ICCI'96 University of Arizona, Tucson, Arizona, 1996, pp. 878-887.
70. Engelhardt, M. D.; Kreger, M. E.; and Jirsa, J. 0., "Strengthening and Repair of Nonductile Reinforced Concrete Frames Using External Steel Jackets and Plates," Project Status Reports: Summary Document for Repair and Rehabilitation Research for Seismic Resistance of Structures, University of Texas at Austin, January 1996, NSF Report R/R 1996.
71. Aboutaha, R. S.; Engelhardt, M. D.; Jirsa, J. 0.; and Kreger, M. E., "Seismic Strengthening of RIC Columns Using Steel Jackets," Ang, A.H-S. and Villaverde, R. "Structural Engineering in Natural Hazards Mitigation," ASCE Structures Congress, Apr 19-21, 1993, pp. 301-306.
72. Kahn, L., "Strengthening Existing Reinforced Concrete Columns for Earthquake Resistance," Proceedings of the Seventh World Conference on Earthquake Engineering, Istanbul, Turkey, 1980, pp. 352-370.
73. Aboutaha, R.; Engelhardt, M.; Jirsa, J.; and Kreger, M., "Seismic Shear Strengthening of RC Columns Using Rectangular Steel Jackets," Fifth US National Conference on Earthquake Engineering, July I0-14, 1994, Chicago, Illinois, pp. 799-808.
74. Priestley, M. J. N., and Seible, F. "Research into Seismic Retrofit of Reinforced Concrete Bridge Columns," Bulletin of the New Zealand National Society for Earthquake Engineering, Vol. 25, No.3, September 1992, pp. 203-210.
75. Valluvan, R.; Kreger, M. E.; and Jirsa, J. 0., "Strengthening of Column Splices for Seismic Retrofit of Nonductile Reinforced Concrete Frames," ACI Structural Journal, Vol. 90, No.4, July August 1993, pp. 432-440.
76. Kaiser, H., "Strengthening of Reinforced Concrete with Epoxy-Bonded Carbon-Fiber Plastics," Swiss Federal Institute, Zurich, Switzerland, 1989.
77. Ritchie, P. A.; Thomas, D. A.; Lu, L.; and Connelly, G. M., "External Reinforcement of Concrete Beams Using Fiber Reinforced Plastics," ACI Structural Journal, Vol. 88, No.4, 1991, pp. 490-500.
78. Triantafillou, T. C., and Deskovic, N., "Innovative Prestressing with FRP Sheets: Mechanics of Shm1-Term Behavior," Journal of Engineering Mechanics, ASCE, Vol. 117, No.7, 1991, pp. 1652-1672.
79. Triantafillou, T. C., and Meier, N., "Innovative Design of FRP Combined with Concrete," Advanced Composite Materials in Bridges and Strcutures, CSCE, Sherbrooke, Canada, 1992, pp. 491-500.
80. Triantafillou, T. C., and Plevris, N., "Flexural Behavior of Concrete Structures Strengthened with Epoxy-Bonded Fiber reinforced Plastics," International Seminar on Structural Repairs/Strengthening by the Plate Bonding Technique, University of Sheffield, England, 1990, pp. I52-161.
81. Triantafillou, T. C., and Plevris, N., "Post-Strengthening of RIC Beams with Epoxy-Bonded Fiber Composite Materials," Advanced Composite Materials in Civil Engineering Structures, ASCE, Las Vegas, Nevada, 1991, pp. 245-256.
82. Triantafillou, T. C., and Plevris, N., "Strengthening of RC Beams with Epoxy-Bonded Fiber Composite Materials," Materials and Structures, RILEM, Vol.25, 1992, pp. 201-211.
83. Triantafillou, T. C.; Deskovic, N.; and Deuring, M., "Strengthening of Concrete Structures with Prestressed Fiber Reinforced Plastic Sheets," ACI Stmctural Journal, Vol. 89, No.3, 1992, pp. 234-244.
84. Chajes, M. J.; Mertz, D. R.; and Thomson, T. A., "Durability of Composite Material Reinforcement," American Society of Civil Engineers, Third Materials Engineering Conference, San Diego, California, 1994, pp. 598-605.
85. Chajes, M. J.; Thomson, T.; Finch, W. W.; and Januska, T., "Flexural Strengthening of Concrete Beams Using Externally Bonded Composite Materials," Construction and Building Materials, Vol. 8, No.3, 1994.
86. AI-Sulaimani, G. J.; Sharif, A.; Basunbul, I. A.; Baluch, M. H.; and Ghaleb, B. N. "Shear Repair for Reinforced Concrete by Fiberglass Plate Bonding," ACI Structural Journal, Vol. 91, No.3, July-August 1994, pp. 458-464.
87. Meier, U., "Bridge Repair with High Performance Composite Materials," Material Und Technik, Vol. 4, 1987, pp. 125-128.
88. Chajes, M. J.; Mertz, D. R.; Kaliakin, V. N.; Holsinger, S. D.; and Meyer, A. J., "Development of a Concrete-Wood-CFRP Composite Beam," American Society of Civil Engineers, 1995 Structures Congress, Boston, Massachusetts, 1995.
89. Saadatmanesh, H, and Ehsani, M. R., "Fiber Composite Plates can Strengthen Beams," Concrete International, Vol. 12, No.3, 1990, pp. 65-71.
90. Saadatmanesh, H., and Ehsani, M., "RC Beams Strengthened with GFRP Plates. 1: Experimental Study," Journal of Structural Engineering, ASCE, Vol. 117, No. II, 199l,pp.3417-3433.
91. Norris, T.; Saadatmanesh, H.; and Ehsani, M. R., "Shear and Flexural Strengthening of RIC Beams with Carbon Fiber Sheets," Joural of Structural Engineering, ASCE, Vol. 123, July 1997, pp. 903-911.
92. Alcocer, S. M., and Jirsa, J. 0., "Strength of Reinforced Concrete Frame Connections Rehabilitated by Jacketing," ACI Structural Journal, May-Junel993, pp. 249-261.
93. Adin, M. A.; Yankelevsky, D. Z.; and Farhey, D. N., "Cyclic Behavior of Epoxy-Repaired Reinforced Concrete Beam-Column Joints," ACI Structural Journal, March-Aprill993, pp. 170-179.
94. Blakeley, R. W. G., and Park, R., "Seismic Resistance of Prestressed Concrete Beam-Column Assemblies," ACI Journal, Vol. 68, No.9, 1971, pp. 677-692.
95. Blakeley, R. W. G., and Park, R., "Prestressed Concrete Sections with Cyclic Flexure," Journal of Structural Division, ASCE, Vol. 99, August 1973, pp. 1717-1742.
96. Thompson, K. J., and Park, R., "Seismic Response of Partially Prestressed Concrete," ASCE Journal, Structural Division, Vol. I06 (ST8), I980, pp. I755-1775.
97. Priestley, M. J. N., and Tao J.R., "Seismic Response of Precast Concrete Frames with Pmtially Debonded Tendons," PCI Journal, January-February 1993, pp. 58-69.
98. Priestley, M. J. N., and MacRae, G. A., "Seismic Tests of Precast Beam-to-Column Joint Subasscmblagcs with Unhanded Tendons," PCI Journal, January-February1996, pp. 64-81.
99. Johnson, W. 8., "An Experimental Investigation of Prestressed Reinforced Columns," MS Thesis, UC Department of Civil Engineering, 1950.
100. I00. Feeser, L. J., and Chinn, J., "Strength and Stiffness of Spirally Prestressed Concrete Cylinders," PCI Journal, June 1962, pp. 55-61.
101. Ben-Zvi, E.; Muller, G.; and Rosenthal, 1., "Effect of Active Triaxial Stress on the Strength of Concrete Elements," ACI Publication, SP-13, 1965, pp. 193-234.
102. Martin, C. W., "Spirally Prestressed Concrete Cylinders," ACI Journal, Vol. 65(10), 1968, pp. 837-845.
103. Perry, S. H.; Armstrong, W. E.; and Harris, A. J., "Axially Loaded Concrete Columns with Non-Uniform Lateral Confinement," Proceedings, Inst. Civ. Engrs., Vol. 82, Part 2, 1987, pp. 243-262.
104. Cheong, H. K., and Perry, S. H., "Concrete Columns with Lateral Prestressing," Journal of Engineering Mechanics, Vol. 117, 1991, pp. 70-87.
105. I05. Gardner, N.J., "Laterally Prestressed Eccentrically Loaded Slender Columns," ACI Structural Journal,Vol. 89, 1992, pp. 547-554.
106. Hiroshi, K., "lntluence of Axial Deformation on Ductility of High-Strength Reinforced Columns Under Varying Triaxial Forces," ACI Structural Journal, Vol. 92, 1995, pp. 61 0-618.
107. I07. Ghali, A.; Sargious, M. A.; and Huizer, A., "Vertical Prestressing of Flat Plates Around Columns," ACI SP-42, 1974, pp. 905-920.
108. I08. Krstulovic-Opara, N., and Kotsovos, M. D., "Effect of Vertical Prestressing on the Punching Failure," Cement and Concrete Composites, Vol. 15, 1993, pp. 131-142.
109. Nishioka, K.; Kakimi, N.; Yamakawa, S.; and Shirakawa, M. D., "Effective Application of Steel Fiber Reinforced Concrete," Fiber Reinforced Cement and Concrete, Rilem Symposium, London, Britain, Vol. I, 1975, pp. 425-433.