Creep and shrinkage of high-performance concrete

American Concrete Institute, ACI Special Publication

Volumn SP-194, Issue , 2000, Pages 361-379

  Dilger, Walter H ^a   Wang, Changqing ^b  

^a UNIVERSITY OF CALGARY   (Canada)

^b Bantrel   (Canada)

Author keywords

Admixtures; Creep; High performance concrete; Prediction model; Shrinkage

Indexed keywords

CEMENTS; CONCRETE ADDITIVES; CONCRETE MIXTURES; CREEP; HIGH PERFORMANCE CONCRETE; HYDRATION; MOISTURE; PREDICTIVE ANALYTICS; PRESTRESSED CONCRETE; STRUCTURAL DESIGN;

CONSTRUCTION STAGES; CREEP AND SHRINKAGES; DESIGN AND ANALYSIS; EXPERIMENTAL PROGRAM; INTERNAL RELATIVE HUMIDITY; MOISTURE PERMEABILITY; TIME-DEPENDENT PROPERTIES; UNIVERSITY OF CALGARY;

SHRINKAGE;

EID: 85112736274     PISSN: 01932527     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (78)

1. Neville, A.M.; Dilger, W.H.; and Brooks, J.J., Creep of Plain and Structural Concrete, Construction Press, London and New York, 1983.
2. Brooks, J.J., and Neville, A.M., "Creep and Shrinkage of Concrete as Affected by Admixtures and Cement Replacement Materials", ACI Publication SP-135 "Creep and Shrinkage of Concrete: Effect of Materials and Environment", 1992, pp. 19-36.
3. Brooks, J.J., "Influence of Mix Proportions, Plasticizers and Superplasticizers on Creep and Drying Shrinkage of Concrete", Magazine of Concrete Research, V. 41, No. 148, 1989, pp. 145-153.
4. CEB-FIP. "International Recommendations for the Design and Construction of Concrete Structures - Principles and Recommendations", British Cement Association, London, 1970, 80 pp.
5. CEB-FIP. "Model Code for Concrete Structures", Paris, 1978 and 1990.
6. ACI Committee 209, "Prediction of Creep, Shrinkage and Temperature Effects in Concrete Structures", American Concrete Institute, Detroit, 1992, 47 pp.
7. Bazant, Z.P., and Panula, L., "Simplified Prediction of Concrete Creep and Shrinkage from Strength and Mix", Structural Engineering Report No. 78-10/6405, Department of Civil Engineering, Northerwestem University, Illinois, Oct. 1978, 24 pp.
8. BS 8110: Part 2: 1985, "Structural Use of Concrete: Code ofPractice for Special Circumstances", British Standards Institution, Milton Keynes, U.K.
9. Pickett, G, "Effect of Aggregate on Shrinkage of concrete and a Hypothesis concerning Shrinkage", ACI Journal, Proceedings V. 52, 1956, pp. 581-90.
10. Neville, A.M., "Creep of Concrete as a Function oflts Cement Paste Content", Magazine of Concrete Research, 16, No. 46, 1964, pp. 21-30.
11. Lea, F.M., The Chemistry of Cement and Concrete, Arnold, London, 1970.
12. Shacklock, B.W., and Keene, P.W., "The Effect ofMix Proportions and Testing Conditions on Drying Shrinkage and Moisture Movement of Concrete", British Cement Association, Technical Report TRA/266, London, June 1957, 16 pp.
13. Reichard, T.W., "Creep and Drying Shrinkage of Lightweight and Normal Weight Concrete", Monograph 74, National ureau of Standards, 1964, 30 pp.
14. Tokuda, H.; Shoya, M.; Kawakami, M.; and Kagaya, M., "Applications ofSuperplasticizers to Reduce Shrinkage and Thermal Cracking of Concrete", ACI Publication, SP 68, Developments in the Use ofSuperplasticizers, 1981, pp. 101-120.
15. Brooks, J.J., "Accuracy of Estimating Long-Term Strains in Concrete", Magazine of Concrete Research, V. 36, No. 128, Sept. 1984, pp. 131-145.
16. Dhir, R.K., and Yap, A.W.F., "Superp1asticized Flowing Concrete: Strength and Deformation Properties", Magazine of Concrete Research, V. 36, No. 129, Dec. 1984, pp. 203-215.
17. Hope, B.B.; Neville, A.M.; and Guruswami, A., "Influence of Admixtures on Creep of Concrete Containing Normal Weight Aggregate". Proceedings RILEM Symposium on Admixtures for Mortar and Concrete, Brussels, Sept. 1967, pp. 17-32.
18. Jessop, E.L.; Ward, M.A.; and Neville, A.M., "Influence ofWaterreducing and Set-retarding Admixtures on Creep of Lightweight Aggregate Concrete", Proceedings, RILEM Symposium on Admixtures for Mortar and Concrete, Brussels, Sept. 1967, pp. 35-46.
19. Hope, B.B., and Brown, N.H., "Influence ofCementComposition on the Creep of Concrete Containing Admixtures", ACI JOURNAL, Proceedings 67, 1970, pp. 673-675.
20. Hope, B.B., and Manning, D.G., "Creep of Concrete Influenced by Accelerators", ACI JOURNAL, Proceedings V. 68, 1971, pp. 361-5.
21. Morgan, D.R. and Welch, G.B., "Influence of admixtures on Creep of Concrete", Third Australian Conference on the Mechanics of Structures and Materials, 2, Session B4, University of Auckland, New Zealand, Aug. 1971.
22. Neville, A.M., and Brooks, J.J., "Time-dependent Behavior of Concrete Containing a Plasticizer", Concrete, V. 9, No. 10, 1975, pp. 33-5.
23. Brooks, J.J., "Influence of Plasticizing Admixtures Cormix P7 and Cormix 2000 on Time-dependent Properties of Flowing Concretes", Research Report, Dept. of Civil Engineering, University of Leeds, Oct. 1984, 12 pp.
24. Brooks, J.J.; Wainwright, P.J.; and Neville, A.M., "Time-dependent Properties of Concrete Containing a Superplasticizing Admixtures", ACI Publication, SP 62, Superplasticizers in Concrete, 1979, 293-314.
25. Brooks, J.J.; Wainwright, P.J.; and Neville, A.M., "Superplasticizer Effect on Time-dependent Properties of Air-entrained Concrete", Concrete, V. 13, No.6, 1979, pp. 35-8.
26. Brooks, J.J.; Wainwright, P.J.; and Neville, A.M., "Time-dependent Behavior of High Early-strength Concrete Containing a Superplasticizer", ACI Publication, SP 68, Developments in the Use of Superplasticizers, 1981, pp. 81-100.
27. Brooks, J.J., and Wainwright, P.J., "Properties of Ultra-high-strength concrete Containing a Superplasticizer", Magazine of Concrete Research, V. 35, No. 125, Dec 1983, pp. 205-214.
28. Berenjian, J., "Superplasticizer Flowing Concrete: Microstructure and Long-tem1 Deformation Characteristics", PhD Thesis, Dept. of Civil Engineering, University of Leeds, 1989, 238 pp.
29. Alexander, K.M.; Bruere, G.M.; and Ivansec, 1., "The Creep and Related Properties of Very High-strength Superplasticized Concrete", Cement and Concrete Research, V. 10, No.2, 1980, 131-7 pp. 132-137.
30. Ross, A.D., "The Creep of Blast-furnace Cement Concrete, ICE JOURNAL, Proceedings V. 8, 1938, pp. 43-52.
31. Neville, A.M.; and Brooks, J .J ., "Time-dependent Behavior of Cemsave Concrete", Concrete, V. 9, No.3, 1975, pp. 36-9.
32. Okada, L.; Nishibayashi, S.; and Tomisawa, T., "Physical Properties, Especially Creep of Portland Blast furnace Slag Cement", Semento Gijutsu Nenpo, Japan, 49, 1960, pp. 191-8.
33. Bamforth, P.B., "An Investigation into the Influence of Partial Portland Cement Replacement Using Either Fly Ash or Ground Granulated Blast Furnace Slag on the Early Age and Long-term Behavior of Concrete, Research Report 0 14J/78/2067, Taywood Engineering, Southall, U.K., 1978.
34. Aitchin, P.C., and Laplante, R., "Volume Changes and Creep Measurements of Slag Cement Concrete", Research Report, Universite de Sherbrooke, 1986, 16 pp.
35. Mills, R.H., "Shrinkage of Concrete Containing Blast-furnace Slag", Research Report, University of Calgary, Canada, 1986.
36. Jardine, D.J., "Properties of High-Slag Concrete", MSc Dissertation, Witwatersrand, Johannesburg, 1976, 134 pp.
37. Cook, D.J.; Hinezak, 1.; and Duggan, R., "Volume Changes in Portland-Blast Furnace Slag Cement Concrete" Proceedings, Second International Conference on the Use of Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Supplementary Papers Volume, Madrid, 1986, 14 pp.
38. Chern, J.C., and Chan, Y.W., "Deformations of Concretes Made with Blast-Furnace Slag Cement and Ordinary Portland Cement", ACI MATERIALS JOURNAL, Proceedings, V. 86, No.4, 1989, pp. 372-382.
39. Brooks, J.J.; Wainwright, P.J.; and Boukendaki, M., "Influences of Slag Type and Replacement Level on Strength, Elasticity, Shrinkage and Creep of Concrete", ACI Publication SP-132, 4th CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, V. 2, 1992, pp. 1325-1342.
40. Chan, Y.W., "Effects ofTemperature or Humidity Conditions on the Strength and Deformation Characteristics of Concretes Containing Fly Ash or Blast-Furnace Slag Cement", Masters thesis, Dept. of Civil Engineering, National Taiwan University, 1988, 143 pp. (in Chinese).
41. Chern, J.C., and Chan, Y.W., "On the Dimensional Stability Investigations of Fly Ash and Blast-Furnace Slag Cement Concretes", Proceedings, Utilisation of Fly Ash and Slag in Concrete Constructions, Taipei, Dec. 1986, pp. 215-243 (in Chinese).
42. Cornelissen, H.A.W., "Creep of Concrete- A Stochastic Quality", Fundamental Research on Creep and Shrinkage of Concrete, edited by Wittmann, Matinus NijhoffPublishers, pp. 109-123, 1982.
43. Fulton, F.S., "The Properties of Portland Cement Containing Milled Granulated Blast-Furnace Slag", Monograph, Portland Cement Institute, Johannesburg, 1974, pp. 4-46.
44. Kasai, Y., "Comparison of Blast Furnace Slag Cement and Fly Ash Cement in Japan", Seminar on Using blast Furnace Slag as Clinker for Concrete, Taipei, Taiwan, May 1986 (in Chinese).
45. Klieger, P., and Isberner, A.W., "Laboratory Studies ofBlended Cement-Portland Blast-Furnace Slag Cements", Journal ofPCA Research and Development Department Laboratories, V. 9, No.3, Sept. 1967, pp. 2-22.
46. Mailvaganam, N.P., "Effects of Admixtures on Portland Cement Concrete Incorporating Blast Furnace Slag and Fly Ash", ACI Publication SP 79-27, 1st International Conference on the Use ofFly Ash Silica Fume, Slag, and other Mineral By-products in Concrete, pp. 519-537, 1983. .
47. Yoda, A., "Concrete with Portland Blast Furnace Slag Cement", Engineering Doctoral Thesis, July 1975 (in Japanese).
48. Brooks, J.J.; Wainwright, P.J.; and Al-Kaisi, A.F., "Compressive and Tensile Creep of Heat-cured Ordinary Portland and Slag Cement Concretes", Magazine of Concrete Research, V. 42, No. 154, 1991, pp. 1-12.
49. Bazant, Z.P.; and Panula, L., "Practical Prediction of Time-dependent Deformations of Concrete", Part IV: Temperature Effect on Basic Creep, Proceedings, Materials and Structures, V. 11, No. 66, Paris, 1978, pp. 424-34.
50. Ross, A.D., "Some Problems in Concrete Construction", Magazine of Concrete Research, V. 12, No. 34, 1960, pp. 27-34.
51. Elfort, R.J., "Bureau of Reclamation Experiences with Fly Ash and Other Pozzolans in Concrete", Proceedings, 3rd International Ash Utilization Symposium, pp. 80-93, 1973.
52. Samarin, A., and Ryan, W.G., "Experience in Use of Admixtures in Concrete Containing Cement and Fly Ash", Workshop on the Use of Chemical Admixtures in Concrete, University ofNew South Wales, Kensington, pp. 91-112, 1975.
53. Lohtia, R.P.; Nautiyal, B.D.; and Jain, O.P., "Creep of Fly Ash Concrete", ACI Digest PaperNo. 73-39, ACI Journal, Aug. 1976, pp. 469-472.
54. Ghosh, R.S.; and Timusk, J., "Creep of Fly Ash Concrete", ACI Journal, Proceedings, V. 78, Title No. 78-30, 1981.
55. Brooks, J.J.; Wainwright, P.J.; and Cripwell, J.B., "Time-dependent Properties of Concrete Containing Pulverised Fuel Ash and a Superplasticizer", Proceedings, International Symposium on the Use of PFA in Concrete, V. 1, Eds. J.G. Cabrera and A.R. Cusens, Dept. of Civil Engineering, University of Leeds, April 1982, pp. 209-220.
56. Gifford, P.M., and Ward, M.A., "Results of Laboratory Tests on Lean Mass Concrete Utilizing PF A to a High Level of Replacement, Proceedings, International Symposium on the Use ofPFA in Concrete, V. 1, Eds. J.G. Cabrera and A.R. Cusens, Dept. of Civil Engineering, University of Leeds, April 1982, pp. 221-229.
57. Yuan, R.L., and Cook, J.E., "Time-Dependent Deformations of High Strength Fly Ash Concrete", Proceedings, International Symposium on the Use ofPFA in Concrete, V. 1, Eds. J.G. Cabrera and A.R. Cusens, Dept. of Civil Engineeri.ng, University of Leeds, April1982, pp. 255-260.
58. Munday, J.G.L.; Ong, L.T.; Wong, L.B.; and Dhir, R.K., "LoadIndependent Movements in OPC/PFA Concrete", Proceedings, International Symposium on the Use ofPFA in Concrete, V. 1, Eds. J.G. Cabrera and A.R. Cusens, Dept. of Civil Engineering, University ofLeeds, Aprill982, pp. 243-254.
59. Yamato, T.; and Sugita, H., "Shrinkage and Creep ofMass Concrete Containing Fly Ash", ACI Publication, SP 79, 1st International Conference on the Use of Fly Ash, Silica Fume, Slag and Other Mineral By-products in Concrete, 1983, pp. 87-102.
60. Nasser, K.W., and Marzouk, H.M., "Properties of Concrete Made with Sulphate Resisting Cement and Fly Ash", ACI Special SP 79, 1st International Conference on the Use of Fly Ash Silica Fume, Slag and Other Mineral By-products in Concrete, 1983, pp. 383-395.
61. Nasser, K.W., and Al-Manaseer, A.A., "Shrinkage and Creep Containing 50 Percent Lignite Fly Ash at Different Stress-Strength Ratios", ACI Publication, SP 91, 2nd International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, 1986, pp. 433-448.
62. Brooks, J.J.; Gamble, A.E.; and AI-Khaja, W.A., "Influence of Pulverised Fuel Ash and a Superplasticizer on Time-dependent Performance of Prestressed Concrete Beams", Proceedings, Symposium on Utilization ofHigh Strength Concrete, Stavanger, Norway, 1987, pp. 205-214.
63. Tikalsky, P.J.; Carrasqiullo, P.M.; and Carrasqiullo, R.L., "Strength and Durability Considerations Affecting Mix Proportions of Concrete Containing Fly Ash", ACI Materials JOURNAL, Title No. 85-M59, Nov.-Dec. 1988, pp. 505-511.
64. Naik, T.R., and Ramme, B.W., "Setting and Hardening of High Fly Ash Content", Proceedings, American Coal Ash Association's 8th International Coal Ash Utilization Symposium, Washington, DC., EPRI, Oct. 28-31, 1987, pp. 16.1-16.20.
65. Brooks, J.J., and Farrugia, R., "Early-age Deformations ofPFA Concrete", Proceedings, 2rd International Conference on the Use of Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Trondheim, Norway, June, 1989, pp. 237-251.
66. Sivasundaram, V.; Carette, G.G.; and Malhotra, V.M., "Properties of Concrete Incorporating Low Quality Cement and High Volume of Low-Calcium Fly Ash", Trondheim, Norway, ACI Publication SP-114, V. I, Proceedings, 1989, pp. 45-71.
67. Torilli, K., and Kawamuza, M., "Some Properties of Dry Lean Rolled Concrete containing Fly Ash", ACI Publication SP-114, Proceedings, 3rd International Conference on the Use of Fly Ash, Slag, and Natural Pozzolans in Concrete, Supplementary Papers, Trodheim, Norway, 1989, pp. 222-236.
68. Dunstan Inc., "Ash-in-Concrete Model Development", Final Report, Prepared by Dunston Inc., Lakewood, Colorado, EPRI, Report No. GS-6129, Jan. 1989, pp. 1.1 to 9.14.
69. Swamy, R.N., and Mahmud, H.B., "Shrinkage and Creep Behavior of High Fly Ash Content Concrete", ACI Publication SP-114, V. 1, Proceedings, 3rd International Conference on the Use of Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Trondheim, Norway, 1989, pp. 453-475.
70. Langley, W.S.; Carette, G.G.; and Malhotra, V.M., "Structural Concrete Incorporating High volumes of ASTM Class F Fly Ash", ACI Materials Journal, Proceedings, V. 86, No.5, Sept.-Oct. 1989, pp. 507-514.
71. Sivasundaram, V.; Carette, G.G.; and Malhotra, V.M., "Selected Properties of High-Volume Fly Ash Concretes", Concrete International, Oct. 1990, pp. 47-50.
72. Nasser, K.W., and Al-Manaseer, A.A .. "Shrinkage and Creep of Concrete Containing 50% Lignite Fly Ash at High Temperatures", Cement, Concrete and Aggregates, CLAGDP, V. 9, No.2, Winter 1987, pp. 95-100.
73. Buil, M., and Acker, P., "Creep of a Silica Fume Concrete", Cement and Concrete Research, V. 15, 1985, pp. 463-466.
74. Tazawa, E.; and Yonekura, A., "Drying Shrinkage and Creep of Concrete with Condensed Silica Fume", ACI Publication SP A 1, Proceedings, 2nd International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Madrid, 1986, pp. 903-921.
75. Bentur A., and Goldman, A., "Curing Effects, Strength and Physical Properties of High Strength Silica Fume Concretes", Journal of Materials in Civil Engineering, V. I, No. I, Feb. I989, pp. 46-58.
76. De Larrard, F., "Creep and Shrinkage of High Strength Field Concretes", CANMET/ACI International Workshop on the Use of Silica Fume in Concrete, Washington D.C., April I991, 22 pp.
77. Pentalla, V.; and Rautanen, T., "Microporosity, Creep and Shrinkage ofHigh Strength Concretes", CANMET/ACI International Workshop on the Use of Silica Fume in Concrete, Washington D.C., Aprill99I, 29pp.
78. Burg, R.G.; and Ost, B.W., "Engineering Properties of Commercially Available High-Strength Concretes", PCA Research and Development Bulletin RD I 04T, Portland Cement Association, Skokie, Illinois, I992, 55 pp.