Mechanical properties and durability of concrete made with Portland limestone cement

American Concrete Institute, ACI Special Publication

Volumn SP-202, Issue , 2001, Pages 431-450

  Irassar, E F ^a   Bonavetti, V L ^a   Menendez, G ^a   Donza, H ^a   Cabrera, O ^a  

^a UNIVERSIDAD NACIONAL DEL CENTRO DE LA PROVINCIA DE BUENOS AIRES   (Argentina)

Author keywords

Blast furnace slag; Chloride diffusion; Curing; Dilution; Hydration degree; Limestone addition; Limestone filler cement; Modulus of elasticity; Strength; Sulfate resistance; Water absorption

Indexed keywords

CEMENT INDUSTRY; CEMENT PLANTS; CHLORINE COMPOUNDS; CONCRETES; DURABILITY; ENERGY UTILIZATION; FILLERS; FLY ASH; LIME; LIMESTONE; MANUFACTURE; PLANNING; PORTLAND CEMENT; POZZOLAN; SLAGS; SULFUR COMPOUNDS; SUSTAINABLE DEVELOPMENT; TENSILE STRENGTH;

CHLORIDE PENETRATION; COMPRESSIVE AND TENSILE STRENGTHS; DURABILITY OF CONCRETES; DURABILITY PROPERTY; ENVIRONMENTAL CONSEQUENCES; MECHANICAL BEHAVIOR; PORTLAND CEMENT CONCRETES; SUPPLEMENTARY CEMENTING MATERIALS;

CEMENT MANUFACTURE;

EID: 85112641557     PISSN: 01932527     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (38)

1. V. Bonavetti, H. Donza, V. Rahhal, E. Irassar. "Effect of initial curing on properties of concrete with limestone filler cement". Cement and Concrete Research, 2000, 30, (5), 703-708.
2. M. Nedhi, S. Mindess, P.C. ATtcin. "Optimization of high strength limestone filler cement mortars". Cement and Concrete Research, 1996, 26, (6), 883-893.
3. J. Baron, C. Douvre. "Technical and economical aspects of the use of limestone filler addition in cement". Word Cement, 1987, 18, 100-104.
4. I. Soroka, N. Stern. "The effect of fillers on strength of cement mortars". Cement Concrete Research, 1977, 7 (4) 449-456.
5. V. Bonavetti. "Limestone fdler cements: Interaction mechanism and its influence on mechanical properties". MSc thesis, Universidad Nacional del Centra de la Prov. de Buenos Aires, Argentine, 1998, 242 p.
6. V. Ramachandran, C. Zhang. "Influence of CaC03 on hydration and microstructural characteristics of tricalcium silicate". II Cemento, 1986, 83 (3) 129-152.
7. J. Pera, S. Husson, B. Guilhot. "Influence of finely ground limestone on cement hydration". Cement and Concrete Composites, 1999, 21 (2) 99-105.
8. K. Sersale. "Advances in portland and blended cement". Proc. 9th International Congress of the Chemistry of Cement, New Delhi, India. 1992, 1, 277-279.
9. V. Bonavetti, E. Irassar. "The effect of stone dust content in sand". Cement and Concrete Research, 1994, 24 (3) 580-590.
10. P. Gegout, H. Hornain, B. Theret, B. Mortureux, J. Volant, M. Regourd. "Texture et performance des ciments fillerises". Proc. 8th International Congress of the Chemistry of Cement, Rio de Janeiro, Brazil. 1986, IV, 197-203.
11. K. C. Narang. "Portland and blended cement". Proc. 9th International Congress of the Chemistry of Cement. New Delhi, India. 1992, 1, 244-245.
12. H.G. Ellerbrock, S. Sprung, K. Kuhlmann. "Particle size distribution and properties of cements. Part III: Influence of grinding process". Zement-Kalk-Gips 1990, 43 (1) 13-19.
13. L. Opoczky. "Progress of the particle size distribution during the intergrinding of a clinker - limestone mixture". Zement-Kalk-Gips. 1992, 45 (12) 648-651.
14. S. Tsivilis, E. Chaniotakis, E. Badogiannis, G. Pahoulas, A. Ilias. "A study on the parameters affecting the properties of portland limestone cements". Cement and Concrete Composites, 1999, 21 (2) 107-116.
15. G. Moir, S. Kelham. "Developments in manufacture and use of portland limestone cement", Proc. High Performance Concrete, V.M. Malhotra (Ed), ACI SP 172, Malaysia, 1997, 797-819.
16. L. Jianyong, T. Pei. "Effect of slag and silica fume on mechanical properties of high strength concrete". Cement and Concrete Research, 1997, 27 (6) 833-837.
17. L. Bagel. "Strength and pore structure of ternary blended cement mortars containing blast furnace slag and silica fume". Cement and Concrete Research, 1998, 28(7) 1011-1020.
18. C. Ozyildirim. "Laboratory investigation of low-permeability concretes containing slag and silica fume". ACI Materials Journal, 1994, 92 (2) 197-202.
19. M.D.A. Thomas, M.H. Shehata, S.G. Shashiprakash, D.S. Hopkins, K. Cail. "Use of ternary cementitious systems containing silica fume and fly ash in concrete". Cement and Concrete Research, 1999, 29, 1207-1214.
20. C. Ozyildirim, W.J. Halstead. "Improved concrete quality with combinations of fly ash and silica fume". ACI Materials Journal, 1994, 91 (6) 587-594.
21. G.C. Isaia. "Synergic action of fly ash in ternary mixtures of high-performance concrete". Proc. 2° CANMET/ACI International Conference, V.M. Malhotra, P. Helene, L.R. Prudencio, D. Dal Molin (Eds), ACI SP-186, Gramado, Brazil. 1999, 481-501.
22. ACI Committee 233, "Ground Granulated Blast Furnace Slag as a Cementitious Constituent in Concrete", ACI Materials Journal, 1995, 92 (3) 321-322
23. J. Deja, J. Malolepszy. "Corrosion resistance of slag cement with a high content of granulate blast furnace slag". Proc. 4° CANMET/ACI Int. Conf. on Durability of Concrete, V.M: Malhotra (Ed), ACI SP-170, Sydney, Australia, 1997, 47-61.
24. M.E. Gaze, N.J. Crammond, "The formation of thaumasite in a cement:Iime:sand mortar exposed to cold magnesium and potassium sulfate solutions". Cement and Concrete Composite, 2000, 22 (3) 209-222.
25. T.C. Powers. "The non evaporable water content of hardened portland cement paste". ASTM Bulletin, 158, 1949, 68-75
26. M. Gonzalez, E.F. Irassar. "Effect of limestone filler on the sulfate resistance of low C3A portland cement". Cement and Concrete Research, 1998, 28 (11) 16551667.
27. V. Bonavetti, V. Rahhal. "Mortars with limestone filler blended cement". Hormigón, 1996, 30, 37-48.
28. J.P. Bombled. "Rheologie du beton frais: Influence de lajout de fillers aux ciments". Proc. 8th. International Congress on the Chemistry of Cement, Rio de Janiero, Brazil, 1986, IV, 190-196.
29. S. Tsivilis, N. Voglis, J. Photou, "A study on the intergrinding of clinker and limestone", Mineral Engineering, 1999, 12, 837.
30. G. Menendez, V. Bonavetti, E.F. Irassar. "Ternary blended cement containing limestone filler and slag", Proc. Int. Conf. on Sustainable construction into the next millennium: environmentally friendly and innovative cement based materials, N. Perazzo Barbosa, R. Swamy & C. Lydsdale (Eds.), Joao Pessoa, Brazil, Nov. 2000, pp. 188-199.
31. I. Soroka. "Portland cement paste and concrete". Chemical Publishing Co, Inc. New York, 1979, 97-98.
32. M.N. Haque, "Give it a week: 7 days initial curing", Concrete International, 1998, 20 (9) 45-48
33. B.J. Addis, M.G. Alexander. "Cement-saturation and its effects on the compressive strength and stiffness of concrete". Cement and Concrete Research, 1994, 24 (5) 975-986.
34. H.F. Taylor, "La qui'mica de los cementos". Ed. URMO. Bilbao. 1967.
35. H. Hornain, J. Marchand, V. Duhot, M. Regourd. "Diffusion of chloride ions in limestone filler blended cement pastes and mortar". Cement and Concrete Research, 1995, 25 (8) 1667-1678.
36. M. Gonzalez, V. Rahhal, V. Bonavetti, H Donza, E.F Irassar. "Effect of curing on early chloride diffusion of filler cement concrete". Proc. International Conference on Infrastructure Regeneration and Rehabilitation, Improving the Quality Life Through Better Construction: A Vision for the Next Millennium, R.N. Swamy (Ed.), Sheffield Academic Press, England. 1999, pp. 137-148.
37. C.L. Hwang & C.Y. Lin. "Strength development of blended blast furnace slag cement mortars". Proc. 2° International Conference on Fly ash, silica fume, slag, and natural pozzolans in concrete, V.M. Malhotra (Ed.), ACI SP 91, Madrid, Spain, Vol.2, 1986, pp 1323-1340.
38. G. Camarini, J.P. Balayssac, Ch.H. Detriche. "Influence of cement type and curing conditions on initial absorption of concrete". Proc. 2° CANMET/ACI Int. Conf. on High Performance Concrete, V.M. Malhotra, P. Helene, L.R. Prudencio, D. Dal Molin (Eds.), ACI SP-186, Gramado, Brazil. 1999, 427-4431.