A survey of the present state of friction modelling in the analytical and numerical investigation of brake noise generation

Proceedings of the ASME Design Engineering Technical Conference

Volumn 7B-1999, Issue , 1999, Pages 2299-2310

  Wallaschek, Jörg ^a   Hach, Karl Heinz ^b   Stolz, Ulrich ^b   Mody, Parimal ^c  

^a UNIVERSITY OF PADERBORN   (Germany)

^b ROBERT BOSCH GMBH   (Germany)

^c Bosch Braking Systems   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMOBILE PARTS AND EQUIPMENT; FRICTION; FRICTION MATERIALS; VIBRATIONS (MECHANICAL); WEAR OF MATERIALS;

ANALYTICAL AND NUMERICAL MODELS; AUTOMOTIVE BRAKE SYSTEMS; AUTOMOTIVE BRAKING SYSTEMS; ENGINEERING PRACTICES; FRICTION MODELLING; FRICTION-AND-WEAR PROCESS; NOISE AND VIBRATION; NUMERICAL INVESTIGATIONS;

BRAKES;

EID: 85101129553     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC99-VIB-8357     Document Type: Conference Paper

References (47)

1. Bengisu, M.T.; Akay, A.: Stability of friction-induced vibrations in multi-degree-of-freedom systems. Journal of Sound and Vibration (1994), Vol.171, No.4, pp. 557-570.
2. Blau, P.J.: Friction science and technology. Marcel Dekker, Inc., New York, 1996.
3. Crolla, D.A.; Lang, A.M.: Brake noise and vibration - the state of the art. Vehicle Tribology, Leeds-Lyon 17, 1991, Tribology Series 18 (Dowson, D.; Taylor, C.M. and Godet, M., ed.), Elsevier Science Publ., Paper VII(i), S. 165 - 174.
4. Czichos, H.; Habig, K.H.: Tribologie-Handbuch: Reibung und Verschleiß. Friedr. Vieweg & Sohn, Braunschweig, 1992.
5. Day, A.J.; Ashi, A.B.: Heat flow and temperatures in frictional material during braking.
6. Dittrich, H.; Lang, R.: Finite-Elemente-Berechnung der thermischen Belastung einer Personenwagen-Scheibenbremse. ATZ 86 (1984) 6, pp. 265-269.
7. Dowson, D.: History of tribology (2nd edition). Professional Engineering Publ., Ltd., Suffolk, 1998.
8. Earles, S.W.E.; Chambers, P.W.: Disc brake squeal noise generation: predicting its dependency on system parameters including damping. Int. J. of Vehicle Design, vol. 8, nos.4,5,6, 1987.
9. Earles, S.W.E.; Chambers, P.W.: Disc brake squeal - some factors which influence its occurence. IMechE, Proc. of the Instituton of Mechanical Engineers (1988), C454/88, pp.39-46.
10. Felske, A.; Hoppe, G; Matthai, H.: Oscillations in squealing disc brakes - Analysis of vibration modes by holographic interferometry. SAE Paper 780333, 1978.
11. Fieldhouse, J.D.; Newcomb, T.P: An experimental investigation into disc brake noise. IMechE Transactions, 1993, paper C444/036/93, pp. 145-159.
12. Greenwood, J.A.; Williamson, J.B.P.: Contact of nominally flat surfaces. Proceedings of the Royal Society of London A, 295, 1966,pp.300-319.
13. Haessig, Jr., D.A.; Friedland, B.: On the Modeling and Simulation of Friction. Journal of Dynamic Systems, Measurement, and Control, Sep. 1991, Vol. 113 pp. 334-362.
14. Hinrichs, N.: Reibungsschwingungen mit Selbst- und Fremderregung: Experiment, Modellierung und Berechnung. Fortschritt-Berichte VDI, Reihe 11: Schwingungstechnik, Nr. 240, VDI-Verlag, Dusseldorf, 1997.
15. Ibrahim, R.A.: Friction-induced vibration, chatter, squeal, and chaos, Part I: Mechanics of contact and friction. Applied Mechanics Reviews, Vol. 47, No. 7, July 1994, pp. 209-226.
16. Ibrahim, R.A.: Friction-induced vibration, chatter, squeal, and chaos, Part II: Dynamics and modelling. Applied Mechanics Reviews, Vol. 47, No. 7, July 1994, pp. 227-254.
17. Ishihara, N.; Nishiwaki, M.; Shimizu, H.: Experimental Analysis of Low - Frequency Brake Squeal Noise.SAE paper 962128, 1996.
18. Jacko, M.G: Physical and chemical changes of organic disc pads in service. Wear, Vol. 46, 1978, pp. 163-175.
19. Jacko, M.G; Tsang, P.H.S.; Rhee, S.K.: Automotive friction materials evolution during the past decade. Wear, 100 (1984), pp.503-515.
20. Lenz, J.: Strukturdynamik unter dem Einfluß von Mikround Makroschlupf in Fugestellen. Dissertation, Universitat der Bundeswehr, Hamburg, 1997.
21. Liles, G: Analysis of disc brake squeal using finite element methods. SAE paper 891150, 1989.
22. Ludema, K.C.: Mechanism-based modeling of friction and wear. Wear, 200 (1996), pp. 1-7.
23. Matsushima, T.; Nishiwaki, M.; Masumo, H.; Ito, S.: FEM analysis of low-frequency disc brake squeal (in case of opposed type caliper). SAE paper 973020, 1997.
24. Mottershead, J.E.; Ouyang, H.; Cartmell, M.P: Parametric resonance phenomena in discs. In: Advances in Automotive Braking Technology, D.C. Barton (editor), MEP Ltd., London and Bury St. Edmunds, 1996, pp. 49-65. ISBN 1 86058 039 4.
25. Murakami, H.; Tsunada, N.; Kitamura, T.: A study concerned with a mechanism of disc-brake squeal. SAE paper 841233, 1984.
26. Musiol, R: Erklarung der Vorgange in der Kontaktzone von trockenlaufenden Reibpaarungen uber gesetzmaßig auftretende Phanomene im Reibprozeß. Dissertation, Selbstverlag, Berlin, 1994.
27. Ouyang, H.; Mottershead, J.E.; Cartmell, M.P; Friswell, M.I.: Friction-induced parametric resonances in discs: Effect of a negative friction-velocity relationship. Journal of Sound and Vibration (1998), vol. 209(2), pp.251-264.
28. Persson, B.N.J.: Sliding friction. Physical principles and applications. Springer, Berlin, Heidelberg,..., 1997.
29. Rabinowicz, E.: Stick-slip. Lecture notes, distributed at a seminar at MIT, 1996.
30. Rabinowicz, E.: Friction fluctuations. In Singer, I.L.; Pollock, H.M. (eds.): Fundamentals of friction: macroscopic and microscopic processes. NATO ASI Series E, Vol. 220, Kluwer Acad. Publ., Dordrecht, 1992, pp. 25-36.
31. Rhee, S.K.: Friction coefficient of automotive friction materials - its sensitivity to load, speed, and temperature. SAE Paper 740415.
32. Rhee, S.K.; Jacko, M.G; Tsang, P.H.S.: The role of friction film in friction, wear and noise of automotive brakes. Wear, 146 (1991), pp. 89-97
33. Richmond, J.W.; Holton, T.R.; Smith, A.C.; Beckett, P.B.; Hodges, T.: The development of an integrated experimental and theoretical approach to solving brake noise problems. In: Advances in Automotive Braking Technology, D.C. Barton (editor), MEP Ltd., London and Bury St. Edmunds, 1996, pp. 3-23. ISBN 1 86058 039 4.
34. Richmond, J.W.; Kao, T.K.; Moore, M.W.: The development of computational analysis techniques for disc brake pad design. In: Advances in Automotive Braking Technology, D.C. Barton (editor), MEP Ltd., London and Bury St. Edmunds, 1996, pp. 69-86. ISBN 1 86058 039 4.
35. Rinsdorf, A.: Evaluation of the energy input in pad and disc during a brake application. SAE paper 942086, 1994.
36. Rinsdorf, A.: Theoretische und experimentelle Untersuchungen zur Komfortoptimierung von Scheibenbremsen. Hoppner und Gotten, Siegen, 1996.
37. Sarnie, R; Sheridan, D.C: Contact Analysis for a Passenger Car Disc Brake. SAE-Paper 900005, 1990.
38. Schiffner, K.; Rinsdorf, A.: Practical evaluation and FEM-modelling of a squealing disc brake. SAE Paper 933071, 1993.
39. Severin, D., Musiol, R: Der Reibprozeß in trockenlaufenden mechanischen Bremsen und Kupplungen. Konstruktion 47 (1995), pp. 59-68.
40. Sheridan, D.C.; Kutchey, J.A.; Sarnie, R: Approaches to the Thermal Modeling of Disc Brakes. SAE Paper 880256, 1989.
41. Shi, X.; Mitschke, M.: Entstehungsmechanismus des Bremsenquietschens. ATZ 99 (1997), pp. 666-673.
42. Singer, I.L.; Pollock, H.M.: Pundamentals of friction: macroscopic and microscopic processes. NATO ASI Series E, Vol. 220, Kluwer Academic Publ., Dordrecht, 1992.
43. Spurr, R.T.: A theory of brake squeal. Proc. Instn. Mecht Engrs. (AD), No 1, 1961 - 62, pp. 33 - 40.
44. Strickland, W.; Yuhas, D.E.: Development of correlation between experimental and modal analysis of brake pads. SAE Paper 962130, 1996.
45. You, H-I.; Hsia, J-H.: The Influence of Priction - Speed Relation on the Occurrence of Stick-Slip Motion. Journal of Tribology, July 1995, Vol. 117, pp. 450-455.
46. Wagenfuhrer, H.: Bremsgerausche. ATZ 66, 1964, pp. 218-222.
47. Wirth, A.; Stone, K.; Whitaker, R.: A Study of the Relationship Between Transfer Film Chemistry and Friction Performance in Automotive Braking Systems. SAE Paper 922541.