Introduction to management of reverse logistics and closed loop supply chain processes

Introduction to Management of Reverse Logistics and Closed Loop Supply Chain Processes

Volumn , Issue , 2004, Pages 1-279

  Blumberg, Donald F ^a  

^a DF Blumberg Associates   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85095926472     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b12427     Document Type: Book

References (98)

1. Andel, T. (1993). New ways to take out the trash, Transportation & Distribution 34(5): pp. 24-30.
2. Anonymous. (2000). Return to sender, Modern Materials Handling 55(6): 64-65.
3. Bagnall, R. (1992). Environmental management systems: Developing an IT strategy, Logistics Ii1formation Management 5(4):19-20.
4. Barros A.I., R. Dekker, and V. Scholten. (1998). A two-level network for recycling sand: A case study, European Journal of Operational Research 110(2):199-215.
5. Biddle, D. (1993). Recycling for profit: The new green business frontier, Haruard Business Review 71(6): 145-156.
6. Blumberg, D. (1991). Managing service as a strategic profit center. New York: McGraw Hill.
7. Blumberg, D. (1999). Strategic examination of reverse logistics & repair service needs, market size & opportunities, Journal of Business Logistics 20 (2).
8. Blumberg, D. (2002). Managing high-tech seruices using a CRM strategy. New York: St. Lucie Press.
9. Brennan, JR. (1994). Warranties; Planning, analysis & implementation. New York: McGraw Hill.
10. Byrne, P.M. and A. Deeb. (1993). Logistics must meet the "green" challenge, Transportation & Distribution 34(2):33-37.
11. Carter C.R. and L.M. Ellram. (1998). Reverse logistics: A review of the literature and framework for future investigation, Journal of Business Logistics 190):85-102.
12. Caruso, C., A. Colorni, and M. Paruccini. (1993). The regional urban solid waste management system: A modeling approach, European Journal of Operational Research 70:16-30.
13. Daugherty, P.J., C.W. Autry, and A.E. Ellinger. (2001). Reverse logistics: The relationship between resource commitment and program performance, Journal of Business Logistics 220): 107-123.
14. de Brito M.P., S.D.P. Flapper, and R. Dekker. (2002). Reverse Logistics: A review of case studies, Econometric Institute Report EI2002-21, Erasmus University Rotterdam, The Netherlands.
15. de Brito, M.P. and E.A. van der Laan. (2002). Inventory management with product returns: The impact of (mis)information, Econometric Institute Report Series EI 2002-29, Erasmus University Rotterdam, The Netherlands.
16. de Koster, M.B.M., S.D.P Flapper, and H.K.W.S.V. (2002). Networks for the collection and processing of end-of-life large white goods (Submitted to Production and Operations Management).
17. de Koster, R.B.M, M.P. de Brito, and M. van de Vendel. (2002). How to organize return handling: An exploratory study with nine retailer warehouses, the Erim Report Series Report in Management (nr. ERS-2001-49-LIS), Erasmus University Rotterdam, The Netherlands. (Forthcoming in International Journal of Retail and Distribution Management.)
18. Del Castillo, E. and J.K. Cochran. (1996). Optimal short horizon distribution operations in reusable container systems, Journal of the Operational Research Society 47(1):48-60.
19. Dowlatshahi S. (2000). Developing a theory of reverse logistics, Interfaces 30:143-155.
20. Flapper, S.D.P. and T. Jensen. (2002). Logistic planning and control of rework. (Forthcoming in International Journal of Production Research.)
21. Fleischmann, M. (2001). Quantitative models for reverse logistics. Berlin: Springer-Verlag. ISB 0075-8450.
22. Fleischmann M., J.M. Bloemhof-Ruwaard, R. Dekker, E. van der Laan, J.A.E.E. van Nunen and L.N. van wassenhove. (1997). Quantitative models for reverse logistics: A review, European Journal of Operational Research 103:1-17.
23. Fleischmann, M., R. Kuik, and R. Dekker. (2002). Controlling inventories with stochastic item returns: A basic model, European Journal of Operational Research 138:63-75.
24. Fleischmann M., H.R. Krikke, R. Dekker and S.D.P. Flapper. (200), A characterization of logistics networks for product recovery, Omega, 28: (6) 653-666.
25. Fuller D.A. and J. Allen. (1997). A typology of reverse channel systems for post-consumer recyclables, in J. Polansky and A.T. Mintu-Winsatt (Eds.), Environmental marketing· Strategies, practice, theory and research. Binghamton, NY: Haworth Press.
26. Ganeshan R., E. Jack, M.J. Magazine, and P. Stephens. (1999), A taxonomic review of supply chain management research, in S. Tayur, R. Ganeshan and M. Magazine (Eels.), Quantitative models for supply chain management, New York: Kluwer Academic Publishers.
27. Gen, M. and Cheng, R. (2000). Genetic algorithms and engineering optimizations. New York: Wiley.
28. Georgiadis, P., D. Vlachos, and I. Karatsis. (2002). Reverse logistics modeling: A new approach, using system dynamics. In 6th Balkan conference on Operational Research proceedings.
29. Ginter P.M. and J.M. Starling. (1978). Reverse distribution channels for recycling, California Management Review 20(3):72-81.
30. Groggin K. and J. Browne. (2000). Towards a taxonomy of resource recovery from end-of-life products, Computers & Industry 42: 177-191.
31. Guide, V.D., Jr. and L.N. Van Wassenhove. (2001). Managing product returns for remanufacturing, Production and Operations Management 10(2):142-154.
32. Guide V.D., Jr. and L.N. Van Wassenhove (Eds.). (2001). Business aspects of closed loop supply chains. Pittsburgh: Carnegie Mellon University Press.
33. Guide, V.D., Jr. and L.N. Van Wassenhove. (2002). Managing Product Returns at HP. INSEAD Case.
34. Guiltinan J. and N. Nwokoye. (1974). Reverse channels for recycling: An analysis for alternatives and public policy implications in R. G. Curhan (Eel.), New marketing for social and economic progress, Combined Proceedings, American Marketing Assoc.
35. Guintini, R. and T. Andel. (1995). Advance with reverse logistics, Transportation & Distribution 36(2): 73ff.
36. Guintini, R. and T. Andel. (1995). Reverse logistics role models, Transportation & Distribution 36(4): 97ff.
37. Gunger A. and S.M. Gupta. (1998). Issues in environmentally conscious manufacturing and product recovery: A survey, Computers & Industrial Engineering 36:811-853.
38. Harrington, L.H. (1994). Hazardous materials compliance: What you don' t know can hurt you, Inbound Logistics 14(8):20-29.
39. Heisig, G. (2002). Planning stability in material requirements planning systems, Lecture Notes in Economics and Mathematical Systems 515, Berlin: Springer-Verlag.
40. Hoffman S., W. Kahler, and W. Wellman. (1995). The complete shipping paper mies, 2nd Eel. HazMat Shipping, c/o Tom Foster, Publisher, One Chilton Way, Radnor, PA 19089.
41. Inderfurth, K. (2002). Optimal policies in hybrid manufacturing/remanufacturing systems with product substitution, FEMM working paper 1/2002 University of Magcleburg, Germany.
42. Inclerfurth, K. (2002). The performance of simple MRP driven policies for stochastic manufacturing/remanufacturing problems, FEMM working paper 6/2002 University of Magdeburg, Germany.
43. Inclerfurth, K., S.D.P. Lambert, A.JD. Rappig, and C.P. Voutsinas. (2002). Production planning for Product Recovery Management, FEMM working paper, University of Magcleburg, Germany.
44. Inderfurth, K., G. Lindner, and N.P. Rahaniotis. (2002). Lot sizing in a production system with rework and product deterioration, in Operations Research Proceedings 2002, Berlin: Heidelberg/New York: Springer.
45. Inclerfurth, K. and Ruud H. Teunter. (2002). Production planning and control of closed-loop supply chains, in V.D.R. Guide et al. (Eels.) Business prospectives on closed loop supply chains.
46. Jahre, M. (1995). Household waste collection as a reverse channel: A theoretical perspective, International Journal of Pbysical Distribution and Logistics Management 25(2):39-55.
47. Jayaraman, V., V.D.R. Guide, Jr., and R. Srivastava. (1999). A closed-loop logistics model for remanufacturing, Journal of the Operational Research Society 50:497-508.
48. Jayaraman, V., R.A. Patterson, and E. Rolland. (2003). The design of reverse distribution networks: Models and solution procedures, European Journal of Operational Research, in press.
49. Kiesmueller, G.P. (2002). A new approach for controlling a hybrid stochastic manufacturing remanufacturing system with inventories and different leacltimes (forthcoming in European Journal of Operational Research).
50. Kiesmueller, G.P. (2002). Optimal control of a one product recovety system with leadtimes. (Forthcoming in International Journal of Production Economics.)
51. Kiesmueller, G.P. and C.W. Scherer (2002). Computational Issues in a Stochastic Finite Horizon One Product Recovery Inventory Model. (Forthcoming in European Journal of Operational Research.)
52. Kiesmueller, G.P. and S. Minner. (2002). Simple expressions for finding recovery system inventory control parameters (forthcoming in Journal of the Operational Research Society).
53. Kleber, R., S. Minner, and G.P. Kiesmueller. (2002). A continuous time inventory model for a product recovery system with multiple options, International Journal of Production Economics 79:121-141.
54. Kokkinaki, A.I., N. Karakapilicles, R. Dekker, and C. Pappis. (2002). A web-based recommender system for end-of-use ICT products. Proceedings of the Second IFIP Conference on E-commerce, E-business, E-government, October.
55. Kokkinaki, A.I., R. Dekker, M.B.M. de Koster, and C. Pappis. (2002). Web applications for reverse logistics networks. (Forthcoming in Supply Chain Management, An International Journal.)
56. Kokkinaki, A.I., R. Dekker, M.B.M. de Koster, C. Pappis, and W. Verbeke (2002). E-business models for reverse logistics: Contributions and challenges. Proceedings of IEEE Computer Society (ITCC) 2002 International Conference on Information Technology, Las Vegas, Nevada, USA, pp. 470-476, April 2002.
57. Kopicky R.J, M.J Berg, L. Legg, V. Dasappa, and C. Maggioni. (1993). Reuse and recycling.-Reverse logistics opportunities. Oak Brook, IL: Council of Logistics Management.
58. Kramp, J and Pruzan, P.M. (1983). The simple plant location problem: Survey and synthesis, European Journal of Operational Research 12, 36-81.
59. Krikke, H.R. (1998). Recovery strategies and reverse logistics network design, Ph.D. Dissertation, Enschede, The Netherlands: University of Twente.
60. Krikke, H.R., E.J Kooi, and P.C. Schurr. (1999). Network design in reverse logistics: A quantitative model, in P. Stahly (Eel.) New trends in distribution logistics. Berlin: Springer Verlag, 45-62.
61. Lambert A.JD. (2002). Determining optimum disassembly sequences in electronic equipment, Computers and Industrial Engineering 43(3):553-575.
62. Lambert A.JD. (2002). Disassembly sequencing: A review. (Forthcoming in International Journal of Production Research.)
63. Lambert A.JD. (2002). Generation of assembly graphs by systematic analysis of assembly structures, Proceedings of 15th IFAC World Congress, Barcelona. Session: Assembly Line Design and Balancing. 6 pp. Proceedings on CD-ROM. Paper edition to appear (Elsevier Scientific).
64. Lambert, A.JD. and F.A. Boons. (2002). Eco-industrial parks, Technovation 22(8):471-484.
65. Lambert, A.JD. and S.M. Gupta. (2002). Demand-driven disassembly optimization for electronic products, Journal of Electronics Mam1facturing 11(2):121-135.
66. Lambert, A.JD., H.M. Boelaarts, and M.A.M. Splinter. (2002). Optimal recycling system design with an application to sophisticated packaging tools. (Forthcoming in Environmental and Resource Economics.)
67. Lindner, G. (2002). Optimizing single stage production in the presence of rework, working paper, Otto-von-Guericke-University Magdeburg, Germany.
68. Lindner, G. and U. Buscher. (2002). An optimal lot and batch size policy for a single item produced and remanufactured on one machine in the presence of limitations on the manufacturing and handling capacity, working paper, Otto-von-Guericke-University Magdeburg, Germany.
69. Melachronoudis, E., H. Min, and X. Wu. (1995). A multiobjective model for the dynamic location of landfills, Location Science 3(3):143-166.
70. Melissen F.W. & A.J de Ron. (1999). Defining recovery practices-Definitions and terminology, International Journal on Environmentally Conscious Manufacturing and Design 8(2):1-18.
71. Min, H. (1989). A bi-criterion reverse distribution model for product recall. Omega 17(5):483-490.
72. Minner, S. and G.P. Kiesmuller. (2002). Dynamic product acquisition in closed loop supply chains, working paper, Otto-von-Guericke University of Magdeburg, Germany.
73. Mostard, J and R. Teunter. (2002). The newsboy problem with resalable returns, working paper, Erasmus University Rotterdam, The Netherlands.
74. Muller, E. J (1993). Environmental packaging: Reduce, reuse, recycle, Distribution 92(11):42-49.
75. Nash, Kim S. (2003). Getting it back, Baseline, Case 054.
76. Nemhauser, G.L. and L.A. Wolsey. (1988). Integer and combinational optimization. Chichester, England: Wiley.
77. Ottman, JA. (1993). Green marketing: Challenges and opportunities for the new marketing age. Chicago: NTC Business Books.
78. ReturnBuy. (2000). The new dynamics of returns: The profit, customer and business intelligence opportunities in returns, White Paper, Ashburn, Virginia: Return-Buy.com, December.
79. Reuse and Recycling-Reverse Logistics Opportunities. (1993). Transmode Consultants and Icf. Inc. by the Council of Logistics Management, 2803 Butterfield Road, Oak Brook, IL 60521.
80. Schmidt G. and W.E. Wilhelm. (2000). Strategic, tactical and operational decisions in multi-national logistics networks: A review and discussion of modeling issues, International Journal of Production Researcb 38(7): 1501-1523
81. Schrijver, A. (2003). Combinatorial optimization: Polybedra and efficiency. Berlin: Springer.
82. Shear, H., T.W. Speh, and JR. Stock. (2003). The warehousing link of reverse logistics. Presented at the 26th Annual Warehousing Education and Research Council Conference, San Francisco, CA.
83. Smith, JM.S. and G. Watts. (1993). A Framework for the environmental management, The Journal of the Institute of Logistics and Distribution Management 12(2):2-5.
84. Stock JR. (1992). Reverse logistics. Oak Brook, IL: Council of Logistics Management.
85. Stock, JR. (2001). The seven deadly sins of reverse logistics, Material Handling Management 56(3):5-10.
86. Teunter, R.H. (2002). Economic ordering quantities for stochastic discounted cost inventory systems with remanufacturing, International Journal of Logistics 5(2):161-175
87. Teunter, R.H. and S.D.P. Flapper. (2002). Lot-sizing for a single-stage, single-product production system with rework of perishable production defectives. (Forthcoming in OR Spektrum.)
88. Teunter, R.H. and E.A. van der Laan. (2002). On the non-optimality of the average cost approach for inventory models with remanufacturing, International Journal of Production Economics 79(1):67-73.
89. Teunter, R.H. and D. Vlachos. (2002). On the necessity of a disposal option for returned products that can be remanufactured, International Journal of Production Economics 75(3):257-266.
90. The Challenge of Going Green. (1994). Harvard Business Review 72(4, July/August):37-50.
91. The Franklin Report. Published by Franklin Associates, Ltd., 4121 West 83rd Street, Suite 108, Prairie Village, KS 66208.
92. Thierry M., M. Salomon, J van Nunen, and L. van Wassenhove. (1995). Strategic sigues in product recovery management, California Management 37 (2):114-135.
93. Thierry, M. (1997). An analysis of the impact of product recovery management on manufacturing companies, Ph.D. Dissertation, Rotterdam, The Netherlands: Erasmus University.
94. Toktay, L.B. (2002). Forecasting product returns, forthcoming in Daniel Guide, Jr., Charles Corbett, Rommert Dekker, and Luk N. Van Wassenhove (Eds.) Business Perspectives in Closed-Loop Supply Cbains.
95. Tsoulfas, G., C. Pappis, and S. Minner. (2002). An environmental analysis of the reverse supply chain of SLI batteries, Resources, Conservation and Recycling 36: 135-154.
96. van der Laan, E. (2003). An NPV and AC analysis of a stochastic inventory system with joint manufacturing and remanufacturing, International journal of Production Economics 81-82:317-331.
97. van der Laan, E. and R. Teunter. (2002). Average costs versus net present value: A comparison for multi-source inventoty models, in A. Klose, M. G. Speranza, L. N. Van Wassenhove, Eds., Quantitative Approaches to Distribution Logistics and Supply Chain Management. Lecture Notes in Economics and Mathematical Systems. Berlin: Springer-Verlag.
98. White, J.A. (1994). Reverse logistics moves forward, Modern Material Handling 49(1):29.