Flow control technology readiness: Aerodynamic versus hydrodynamic

18th Applied Aerodynamics Conference

Volumn , Issue , 2000, Pages

  Joslin, Ronald D ^a   Kunz, Robert F ^a   Stinebring, David R ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FLOW CONTROL; HYDRODYNAMICS;

AERODYNAMIC APPLICATIONS; AERODYNAMIC BENEFITS; FLOW CONTROL TECHNOLOGIES; SENSORY INFORMATION; TECHNOLOGY DEVELOPMENT; TECHNOLOGY READINESS LEVELS; TIME DEPENDENCY; UNDERWATER APPLICATION;

AERODYNAMICS;

EID: 85087606356     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2514/6.2000-4412     Document Type: Conference Paper

References (192)

1. Gad-el-Hak, M., Pollard, A., Bonnet, J.-P. (eds), Flow Control: Fundamentals and Practices, Springer-Veiia.g: Berlin, Heidelberg, 1998.
2. Glick, P. A, The Distribution of Insects, Spiders, and Mites in the Air, Technical Bulletin No. 673, US Department of Agriculture, 1939.
3. Coleman, W. S., Roughness due to Insects. Boundary Layer and Flow Control, Volume 2, (G, V. Lachmarm, ed), Pergamon Press, 1961, pp. 682-747.
4. Meifarth, K. U. and Heinrich, S., The Environ ment for Aircraft with Laminar Flow Technology within Airline Service. DGLR-Bericht 9206, 1992, pp. 251-255.
5. Anon. 85-86 Aerospace Fads & Figures, Aerospace Industries Association of America, Inc., 1985, pp 94-95.
6. Anon, Aerospace. Facts & Figures 1995-96, Aerospace Industries Association of America, Inc., 1995, pp 92-93
7. Schumacher, M., Seawater Corrosion Handbook. Noyes Data Corporation, 1979.
8. Simpson J O, Wise S A., Bryant R G., Cano R J., Gates T S., Hinkley J A., Rogowski R S., and Whitley K S., Innovative Materials for Aircraft Morphing. SPIE's 5th Annual International Symposium on Smart Structures and Materials, March 1.-5, 1998/San Diego, CA.
9. Cattafesta, L., Mathew, J, Wang, W., and Kur-dila A., Modeling of Piezoelectric Actuators for Fluid Flow Control. SAE Paper 2000-015531
10. Bryant, R. G, Fox R L., Lachowiez J T., and Chen F.-J, Piezoelectric Synthetic Jets for Aircraft Control Surfaces. Smart Structures and Materials 6th Annual International Symposium, Newport Beach, CA/March 1-5, 1999.
11. Burr R F., Berger S S., and Tence D A., Overview of Phase Change Piezoelectric Ink Jet Fluids Modeling and Design, ASME FED-Vol. 239, 1996, pp. 545-552.
12. Lin J C, Control of Turbulent Boundary- Layer Separation using Micro-Vortex Generators. AIAA Paper 99-3404, June 1999.
13. Bender E E. Anderson, B. H., and Yagle, P. J., Vortex Generator Modeling for Navier-Stokes Codes. ASME Paper FEDSM99-6919, July 1999.
14. McManus, K and Magill, J., Separation Control in Incompressible and Compressible Flows using Pulsed Jets. AIAA Paper 96-1948, June 1996.
15. Jacobson S A. and Reynolds W. C-, Active Control of Streamwise Vortices a,nd Streaks in Boundary Layers. Journal of Fluid Mechanics, Vol. 360, April 1998, pp. 179-212.
16. Koumoutsakos P., Simulations of Vortex Gener ators. Center for Turbulence Research Annual Research Briefs, 1995, pp. 233-240,
17. Saddoughi, S. G., Preliminary Results of the"on-demand" Vortex-Generator Experiments. Center for Turbulence Research Annual Research Briefs, 1995, pp. 227-232.
18. Lachowicz, J. T., Yao, C.-S., and Wlezien, E. W., Scaling of an Oscillatory Flow Control Actuator. AIAA Paper 98-0330, January 1998.
19. Lachowicz, J. T., Yao, C., and Wlezien, R. W., Flow Field Chacterization of a Jet and Vortex Actuator," Experiments in Fluids, Vol. 27, No. June 1999, pp. 12-20.
20. Ingard U. and Labate S., Acoustic Circulation Effects and the Nonlinear Impedance of Orifices. Journal of the Acoustical Society of America, Vol. 22, No. 2, March 1950, pp. 211218.
21. Wiltse, J. M. and Glezer, A., Manipulation of Free Shear Flows Using Piezoelectric Actuators. Journal of Fluid Mechanics, Vol. 249, 1993, pp. 261-285.
22. Smith, B. L. and Glezer, A., The Formation and Evolution of Synthetic Jets. Physics of Fluids, Vol. 10, No. 9, September 1998, pp. 2281-2297.
23. Joslin, R. D., Horta, L. G. and Chen, F.-J., Transitioning Active Flow Control to Applications. AIAA Paper 99-3575, June 1999.
24. Roth, J. R., Sherman, D. M., and Wilkinson, S. P., Boundary Layer Flow Control with a One Atmosphere Uniform Glow Discharge Surface Plasma. AIAA Paper 98-0328, January 1998.
25. Wilkinson, S. P., (personal communication), July 5, 2000. Joslin, R. D., Overview of Laminar Flow Control. NASA/TP-1998-208705, October 1998.
26. Joslin, R. D., Aircraft Laminar Flow Control. Annual Review of Fluid Mechanics, Vol. 30, pp. 1-29.
27. Joslin, R. D., Aircraft Laminar Flow Control. Annual Review of Fluid Mechanics, Vol. 30, 1998, pp. 1-29.
28. Hefner, J. N., and Sabo, F. E., Research in Natural Laminar Flow and Laminar-Flow Control, March 16-19, 1987/NASA Langley Research Center, NASA CP-2487.
29. First European Forum on Laminar Flow Technology, March 16-18,1992/Hamburg, Germany.
30. Bushnell, D. M., and Tuttle, M. H., Survey and Bibliography on Attainment of Laminar Flow Control in Air Using Pressure Gradient and Suction. NASA RP-1035, Vol.1, September 1979.
31. Tuttle, M. H., and Maddalon, D. V., Laminar Flow Control (1976-1982). NASA TM-8U96, 1982.
32. Tuttle, M. EL, and Maddalon, D. V., Laminar Flow Control (1976-1991)-A Comprehensive, Annotated Bibliography. NASA TM-107749, March 1993.
33. Wagner, R. D., Maddalon, D. V., Bartlett, D. W., and Collier, F. S., Jr., Fifty Years of Laminar Flow Flight Testing. SAE Paper 881393, 1988.
34. Holmes, B. J. and Obara, C. J., Flight Research on Natural Laminar Flow Applications. Natural Laminar Flow and Laminar Flow Control, (R. W. Bamell, M. Y. Hussaini, eds), Springer- Verlag, 1992, pp. 73-142.
35. Holmes, B. J., Obara, C. J., and Yip, L. P., Natural Laminar Flow Experiments on Modern Airplane Surfaces. NASA TP 2256, 1984.
36. Thibert, J. J., Reneaux, J., and Schmitt, R. V., ONERA Activities on Drag Reduction. Proceedings of the 17th Congress of the International Council of the Aeronautical Sciences, 1990, pp. 1053-1059.
37. Holmes, B. J., Ahmed, A., and Nyenhuis, R. Further Results of Natural Laminar Flow Flight rest Experiments. SAE Paper 850862, 1985.,
38. Gottsehalk, M. A., Going with the Flow. Design News, September 9, 1996, pp. 23-24.
39. Bushnell, D., Supersonic Aircraft Drag Reduction. AIAA Paper 90-1596, June 1990.
40. Lauchle, G. C., Eisenhuth, J. J., and Gurney, G. B., Boundary-Layer Transition on a Body of Revolution. Journal of Hydronautics, Vol. 14, No. 4, October 1980, pp. 117-121.
41. Lauchle, G. C. and Gurney, G. B., Laminar Boundary Layer Transition on a Heated Underwater Body. Journal of Fluid Mechanics, Vol. 144, 1984, pp. 79-101.
42. Hansen, E. J. and Hoyt, J. G., Laminar-to-Turbulent Transition on a Body of Revolution with an Extended Favorable Pressure Gradient Forebody. Journal of Fluids Engineering, Vol. 106, June 1984, pp. 202-210.
43. Strazisar, A. J., Reshotko, E., and Prahl, J. M., Experimental Study of the Stability of Heated Laminar Boundary Layers in Water. Journal of Fluid Mechanics, Vol. 83, Part 2, 1977, pp. 225-247.
44. Smith, A. M. O. and Clutter, D. W., The Smallest Height of Roughness Capable of Affecting Boundary-Layer Transition. Journal of Aero/Space Sciences, Vol. 26, 1959, pp. 229245.
45. Dunn, D. W., and Lin, C. C. On the Role of Three-Dimensional Disturbances in the Stability of Supersonic Boundary Layers. Journal of the Aeronautical Sciences, Vol. 20, 1953, pp. 577-578.
46. Parikh, P. G. and Nagel, A. L., Application of Laminar Flow Control to Supersonic Transport Configurations. NASA CR-181917, 1990.
47. Reshotko, E., Drag Reduction by Cooling. Jour nal of Aircraft, Vol. 16, September 1979, pp. 584-590.
48. Powell, A. G., The Right Wing of the L.E.F.T. Airplane. NASA CP-2487, Part 1, 1987, pp. 141-161.
49. Saric, W., Carillo, R., and Reibert, M., Leading Edge Roughness as a Transition Control Mechanism. A1AA Paper 98-0781, 1998.
50. Janke, E. and Balakumar, P., Transition Control Using Leading Edge Roughness. AIAA Paper 99-3656, 1999.
51. Antonatos, P. P., Laminar Flow Control- Concept and Applications. Astronautics and Aeronautics, Vol. 4, No, 7, 1966, pp. 32-36.
52. Arcara, P.C. Jr., Bartlett, D. W., and Mc-Cullers, L. A., Analysis for the Application of Hybrid Laminar Flow Control to a Long-Range Subsonic Transport Aircraft. SAE Paper 912113, September 1991.
53. Boeing Commerical Airplane Company, Application of Laminar Flow Control to Supersonic Transport Configurations. NASA CR-181917, 1990.
54. Powell, A. G., Agrawal, S., and Lacey, T. R., Feasibility and Benefits of Laminar Flow Control on Supersonic Cruise Airplanes. NASA CR-181817, 1989.
55. Robert, J.-P., Hybrid Laminar Flow Control-A Challenge for a Manufacturer. First European Forum on Laminar Flow Technology, March 1618, 1992/Hamburg, Germany, pp. 294-308.
56. Maddalon, D. V. and Braslow, A. L., Simulated-Airline-Service Flight Tests of Laminar-Flow Control with Perforated-Surface Suction System. NASA TP-2966, 1990.
57. Collier, F. S., Jr., An Overview of Recent Subsonic Laminar Flow Control Flight Experiments. AIAA Paper 93-2987, 1993.
58. Woan, C. J.; Gingrich, P. B.; and George, M. W., CFD Validation of a Supersonic Laminar Flow Control Concept. AIAA Paper 91-0188, January 1991.
59. Anderson, B. T. and Bohn-Meyer, M., Overview of Supersonic Laminar Flow Control Research on the F-16XL Ships 1 and 2. SAE Paper 921994, 1992.
60. Norris, G., Laminar Flow Control-Smooth and Supersonic. Flight International, Vol. 145, No. 4421, May 18, 1994, pp. 32-33.
61. Anders, S. G. and Fischer, M. C., F16XL-2 Supersonic Laminar Flow Control Flight Test Experiment. NA SA/TP-1999-209683, December 1999.
62. Strazisar, A. J., Reshotko, E., and Prahl, J. M., Experimental Study of the Stability of Heated Laminar Boundary Layers in Water. Journal of Fluid Mechanics, Vol. 83, Part 2, 1977, pp. 225-247.
63. Chen, C. P., Goland, Y. and Reshotko, E., Generation Rate of Turbulent Patches in the Laminar Boundary Layer of a Submersible. AIAA Viscous Flow Drag Reduction, (ed., G. R. Hough), Vol. 72, 1979, pp. 73-89.
64. Lauchle, G. C., Petrie, H. L., and Stinebring, D. R., Laminar Flow Performance of a Heated Body in Particle-Laden Water. Experiments in Fluids, Vol. 19, 1995, pp. 305-312.
65. Virk, P. S., Wagger, D. L., and Koury, E. The Asymptotic Maximum Drag Reduction Induced by Additives in Internal Flows. ASME FED-Vol. 237, 1996, pp. 261-276.
66. Hoyer, K. W. and Gyr, A., Heterogeneous Drag Reduction Concepts and Consequences. ASME FED-Vol. 237, 1996, pp. 151-158.
67. Virk, P. S., Drag Reduction Fundamentals. AlChe Journal, Vol. 21, July 1975, pp. 625656.
68. Virk, P. S., Mickley, H. S., and Smith, K. A., The Ultimate Asymptote and Mean Flow Structure in Toms' Phenomena. Journal of Applied Mechanics, Transaction of ASME, Paper No. 7G-APM-HH, 1970.
69. Petrie, H. L., Brungart, T. A., and Fontaine, A. A., Drag Reduction on a Flat Plate at High Reynolds Number with Slot-Injected Polymer Solutions. ASME FED-Vol. 237, 1996, pp. 310.
70. Gasljevic, K. and Matthys, E. F., Field Test of a Drag-Reducing Surfactant Additive in a Hy- dronic Cooling System. ASME FED-Vol. 237, 1996, pp. 249-260.
71. Motier, J. F., Chou, L.-C., and Kommareddi, N., Commercial Drag Reduction: Past, Present and Future. ASME FED-Vol. 237, 1996, pp. 229-234.
72. Latorre, R. and Babenko, V. V., Role of Bubble Injection Technique Drag Reduction. Proceedings of the International Symposium on Seawater Drag Reduction, July 22-23,1998/Newport, RI, pp. 319-325.
73. Meng, J. C. S. and Uhlman, J. S., Jr., Microbubble Formation and Splitting in a Turbulent Boundary Layer for Turbulence Reduction. Proceedings of the International Symposium on Seawater Drag Reduction, July 22-23, 1998/Newport, RI, pp. 341-355.
74. Bogdevich, V. G., Maltzev, L. I., and Maluga, A. G., Optimization of the Distributed Gas Injection into a Turbulent Boundary Layer for Drag Reduction. Proceedings of the International Symposium on Seawater Drag Reduction, July 22-23, 1998/Newport, RI, pp. 327-330.
75. Madavan, N. K., Deutsch, S., and Merkle, C. L., The Effect of Porous Material on Microbubble Skin Friction Reduction. AIAA Paper 84-0348, January 1984.
76. Guin, M. M., Kato, H., arid Takahashi, Y., Experimental Evidence for a Link between Mircobubble Drag Reduction Phenomena and Periodically Excited Wall-Bounded Turbulent Flow. Proceedings of the International Symposium on Seawater Drag Reduction, July 22-23, 1998/Newport, RI, pp. 313-318.
77. Choi, K.-S. and Clayton, B. R., The Mechanism of Turbulent Drag Reduction with Wall Oscillation. Proceedings of the International Symposium on Seawater Drag Reduction, July 22-23, 1998/Newport, RI, pp. 229-235.
78. Dhanak, M. R. and Si, C., On the Physics of Skin Friction Reduction through Wall Oscillation. Proceedings of the International Symposium on Seawater Drag Reduction, July 22-23, 1998/Newport, RI, pp. 237-239.
79. Choi, H., Moin, P. and Kim, J., Active Turbulence Control for Drag Reduction in Wall- Bounded Flows. Journal of Fluid Mechanics, Vol. 262, March 10, 1994, pp. 75-110.
80. Tardu, S., Local Oscillating Blowing in a Turbu lent Boundary Layer. Proceedings of the International Symposium on Seawater Drag Reduction, July 22-23, 1998/Newport, RI, pp. 241248.
81. Gray, J., Studies in Animal Locomotion VI: The Propulsive Power of the Dolphin. Journal of Experimental Biology, Vol. 13, 1936, pp. 192199.
82. Kramer, M.O., Boundary-Layer Stabilization by Distributed Damping. Journal of the Aeronautical Sciences, Vol. 24, No.6,1957, pp. 459-460.
83. Kramer, M.O., Hydrodynamics of the Dolphin. Advances in Hydroscience, Vol. 2, 1965, pp. 111-130.
84. Bushnell, D.M., NASA Research on Viscous Drag Reduction II. Laminar- Turbulent Boundary Layers, Vol. 11, 1984, pp. 93-98.
85. Reischxnan, M.M., A Review of Compliant Coating Drag Reduction Research at ONR. Laminar-Turbulent Boundary Layers, Vol. 11, 1984, pp. 99-105.
86. Carpenter, P.W., and Garrad, A.D., The Hydrodynamic Stability of Flow over Kramer- Type Compliant Surfaces; Part 1. Tollmien- Schlichting Instabilities. Journal of Fluid Mechanics, Vol. 155, 1985, pp. 465-510.
87. Carpenter, P.W., and Garrad, A.D., The Hydro dynamic Stability of Flow over Kramer-Type Compliant Surfaces: Part 2. Flow-Induced Surface Instabilities. Journal of Fluid Mechanics, Vol. 170, 1986, pp. 199-232.
88. Willis, G.J.K., Hydrodynamic Stability of Boundary Layers over Compliant Surfaces. Ph.D. Thesis, University of Exeter, 1986.
89. Gaster, M., Is the Dolphin a Red-Herring?, Tur bulence Management and Relaminarisation, 1988, pp. 285-304, (ed, H.W. Liepmann and R. Narasimha), IUTAM:Bangalore, India.
90. Yeo, K.S., The Stability of Flow over Flexible Surfaces. Ph.D. Thesis, University of Cambridge, 1986.
91. Grosskreutz, R, An Attempt to Control Boundary-Layer Turbulence with NonIsotropic Compliant Walls. University Science Journal Dar es Salaam, Vol. 1, 1975, pp. 6573.
92. Carpenter, P.W., and Morris, P.J., Growth of 3-D Instabilities in Flow over Compliant Walls. Proceedings of the 4th Asian Congress of Fluid Mechanics, 1989, Hong Kong.
93. Joslin, R.D., Morris, P.J., and Carpenter, P.W., The Role of Three-Dimensional Instabilities in Compliant Wall Boundary-Layer Transition. AIAA Journal, Vol. 29, No. 10, 1991, pp. 1603-1610.
94. Joslin, R.D. and Morris, P.J., The Effect of Compliant Walls on Secondary Instabilities in Boundary-Layer Transition. AIAA Journal, Vol. 30, No. 2, 1992, pp. 332-339.
95. Benjamin, T.B., Effects of a Flexible Boundary on Hydrodynamic Stability. Journal of Fluid Mechanics,'Vol. 9, 1960, pp. 513-532.
96. Benjamin, T.B., The Three Fold Classification of Unstable Disturbances in Flexible Surfaces Bounding Inviscid Flows. Journal of Fluid Mechanics, Vol. 16, 1963, pp. 436-450.
97. Benjamin, T.B., Fluid Flow with Flexible Boundaries. Proceedings of the 11th International Congress of Applied Mechanics, Munich, 1964, pp. 109-128.
98. Landahl, M.T., On the Stability of a Laminar Incompressible Boundary Layer over a Flexible Surface. Journal of Fluid Mechanics, Vol. 13, 1962, pp. 609-632.
99. Gyorgyfalvy, D., Possibilities of Drag Reduction by the Use of Flexible Skins. Journal of Aircraft, Vol. 4, No. 3, 1967, pp. 186-192.
100. Carpenter, P. W., Optimization of Muliple- Panel Compliant Walls for Delay of Laminar- Turbulent Transition. AIAA Journal, Vol. 31, 1993, pp. 1187-1188.
101. Duncan, J. H., The Response of an Incompressible, Viscoelastic Coating to Pressure Fluctuations in a Turbulent Boundary Layer. Journal of Fluid Mechanics, Vol. 171, October 1986, pp. 339-363.
102. Gad-el-Hak, M., Compliant Coatings Research: A Guide to the Experimentalist. Journal of Fluids and Structures, Vol. 1, 1987, pp. 55-70.
103. Lee, T., Fisher, M., and Schwarz, W. H. Investigation of the Effects of a Compliant Surface on Boundary-Layer Stability. Journal of Fluid Mechanics, Vol. 288, April 10, 1995, pp. 37-58.
104. Fein, J. A. Dolphin Drag Reduction: Myth or Magic., Proceedings of the International Symposium on Seawater Drag Reduction, 22-23 July 1998/Newport, RI, pp. 429-432.
105. Bushnell, D.M., Hefner, J.N., and Ash, R.L., Effect of Compliant Wall Motion on Turbulent Boundary Layers. The Physics of Fluids, Vol. 20, 1977, pp. S31-S48.
106. Riley J.J., Gad-el-Hak, M., and Metcalfe, R, Compliant Coatings. Annual Review of Fluid Mechanics, Vol. 20, 1988, pp. 393-420.
107. Gad-el-Hak, M., Boundary Layer Interactions with Compliant Coatings: An Overview. Applied Mechanics Reviews, Vol. 39, 1988, pp. 511-523.
108. Gad-el-Hak, M., Compliant Coatings: A Decade of Progress. Applied Mechanics Reviews, Vol. 49, No. 10, Part 2, 1996, pp. S147-S157.
109. Gad-el-Hak, M., Compliant Coatings: The Simpler Alternative. Proceedings of the International Symposium on Seawater Drag Reduction, 22-23 July 1998/Newport, RI, pp. 197204.
110. Carpenter, P.W., Status of Transition Delay using Compliant Walls. AIAA Viscous Drag Reduction in Boundary Layers, Vol. 123, 1990, (ed. D.M. Bushnell and J.N. Hefner), pp. 79113.
111. Walsh, M. J., Drag Characteristics of V-Groove and Transverse Curvature Riblets. AIAA Viscous Flow Drag Reduction. Vol. 72, 1980, (ed. Gary R. Hough), pp. 169-184.
112. Liu, C. K., Kline, S. J., and Johnston, J. P., An Experimental Study of Turbulent Boundary Layer on Rough Walls. Report MD-15, Thermosciences Division, Department of Mechanical Engineering, Stanford University, July 1966, 188 pgs.
113. Walsh, M. J., Turbulent Boundary Layer Drag Reduction Using Riblets. AIAA Paper 820169, January 1982.
114. Walsh, M. J. and Lindemann, A. M., Optimization and Application of Riblets for Turbulent Drag Reduction. AIAA Paper 84-0347, January 1984.
115. Bacher, E. V. and Smith, C. R., A Combined Visualization-Anemometry Study of the Turbulent Drag Reducing Mechanisms of Triangular Micro-Groove Surface Modifications. AIAA Paper 85-0548, March 1985.
116. Gallagher, J. A. and Thomas, A. S. W., Turbulent Boundary Layer Characteristics over Streamwise Grooves. AIAA Paper 84-2185, August 1984.
117. Subaschandar, N., Kumar, R., and Sun-daram, S., Drag Reduction Due to Riblets on a GAW(2) Airfoil. Journal of Aircraft, Vol. 36, No. 5, September-October 1999, pp. 890-892.
118. Walsh, M. J Riblets. AIAA Viscous Flow Drag Reduction. Vol. 123, 1990, (ed. D. M. Bushnell, J. Hefner), pp. 203-261.
119. Anders, J. B., Walsh, M. J., and Bushnell, D. M., The Fix for Tough Spots. Aerospace America, January 1988, pp. 14.
120. DeMeis, R., Stick-to-it Riblets. Aerospace America, January 1988, pp. 48-49.
121. Mecharn, M., 3M Thin Skin Tested by Airbus. Aviation Week & Space Technology, December 2, 1996, pg. 34.
122. Hefner, J. N., Weinstein, L. M., and Bushnell, D. M. Large-Eddy Breakup Scheme for Turbulent Viscous Drag Reduction. AIAA Viscous Flow Drag Reduction. Vol. 72, 1980, (ed. Gary R. Hough), pp. 111-127.
123. Anders, J. B. and Watson, R. D., Airfoil Large- Eddy Breakup Devices for Turbulent Drag Reduction. AIAA Paper 85-0520, March 1985.
124. Blackwelder, R. F. and Chang, S.-I., Length Scales and Correlations in a LEBU Modified Turbulent Boundary Layer. AIAA Paper 860287, January 1986.
125. Bertelrud, A., Manipulated Turbulence Structure in Flight. Advances in Turbulence, 1986, pp. 524-532.
126. Lin, J. C., Robinson, S. K., McGhee, R. J., and Valarezo, W. O., Separation Control on High-Lift Airfoils via Micro-Vortex Generators. Journal of Aircraft, Vol. 31, No. 6, 1994, pp. 1317-1323.
127. Taylor, H. D. and Hoadley, H. H., Design Criteria for and Applications of the Vortex Generator Mixing Principle. United Aircraft Corporation Report M-15038-1, Febrary 1948.
128. Taylor, H. D. and Hoadley, H. H., Application of Vortex Generator Mixing Principle to Diffusers. United Aircraft Corporation Report R-15064-5, December 1948.
129. Anderson, B. H., Yagle, P. J., Miller, D. N., and TVuax, P. P., A Study of MEMS Flow Control for the Management of Engine Face Distortion in Compact Inlet Systems. AS ME FEDSM99- 6920, July 1999.
130. Anderson, B. H. and Gibb, J., Vortex Generator Installation Studies on Steady State and Dynamic Distortion. AIAA Paper 96-3279, July 1996.
131. Caiarese, W, Crisler, W. P., and Gustafson, G. L., Afterbody Drag Reduction by Vortex Generators. AIAA Paper 85-0354, January 1985.
132. Wortman, A., Alleviation of Fuselage Form Drag using Vortex Flows. US Department of Energy Report DOE/CE/15277-T1, September 1987.
133. Nickerson, J. D., A Study of Vortex Generators at Low Reynolds Numbers. AIAA Paper 860155, January 1986.
134. Barrett, R. and Farokhi, S., On the Aerodynamics and Performance of Active Vortex Generators. AIAA Paper 93-3447-CP, 1993.
135. Seifert, A., Eliahu, S., Greenblatt, D. and Wyg- nanski, L, Use of Piezoelectric Actuators for Airfoil Separation Control. AIAA Journal, Vol. 36, No. 8, 1998, pp. 1535-1537.
136. Hsiao, F.-B., Wang, T.-Z., and Zohar, Y., Flow Separation Control of a 2-D Airfoil by a Leading-Edge Oscillating Flap. Pacific International Conference on Aerospace Science and Technology, Vol. 1, 1993, pp. 250-256.
137. Pugiiese, A.J., and Englar, R.J., Flight Testing the Circulation Control Wing. AIAA Paper 791791, August 1979.
138. Novak, C. J., Cornelius, K. C., and Roads, R. K., Experimental Investigations of the Circular Wall Jet on a Circulation Control Airfoil. AIAA Paper 87-0155, January 1987.
139. Englar, R.J., and Applegate, C.A., Circulation Control - A Bibliography of DTNS- DRC Research and Selected Outside References. DTNSDRC Report 84-052, October 1984.
140. Oyier, T. E. and Palmer, W. E., Exploratory Investigation of Pulse Blowing for Boundary Layer Control. North American Rockwell Corp., Report No. NR 72H-12, January 1972.
141. McManus, K. and Magill, J., Airfoil Performance Enhancement using Pulsed Jet Separation Control. AIAA Paper 97-1971, June 1997.
142. Magill, J. C. and McManus, K. R., Control of Dynamic Stall using Pulsed Vortex Generator Jets. AIAA Paper 98-0675, January 1998.
143. Seifert, A., Bachar, T., Koss, D., Shepsh-elovich, M., and Wygnanski, I., Oscillatory Blowing: A Tool to Delay Boundary-Layer Separation. AIAA Journal, Vol. 31, No. 11, November 1993, pp. 2052-2060.
144. Seifert, A.,Darabi, A., and Wygnanski, I., Delay of Airfoil Stall by Periodic Excitation. Journal of Aircraft, Vol. 33, No. 4, July-August 1996, pp. 691-698.
145. Seifert, A., Bachar, T., Wygnanski, I., Kariv, A., Cohen, H., and Yoeli, R., Application of Active Separation Control to a Small Unmanned Air Vehicle. Journal of Aircraft, Vol. 36, No. 1998, pp. 474-477.
146. Seifert, A. and Pack, L. G., Oscillatory Excitation of Unsteady Compressible Flows over Airfoils at Flight Reynolds Numbers. AIAA Paper 99-0925, January 1999.
147. Seifert, A. and Pack, L. G., Oscillatory Control of Separation at High Reynolds Numbers. AIAA Journal, Vol. 33, No. 9, 1999, pp. 10621071.
148. McLean, J. D., Crouch, J. D., Stoner, R. C., Sakurai, S., Seidel, G. E., Feifel, W. M., and Rush, H. M., Study of the Application of Separation Control by Unsteady Excitation to Civil Transport Aircraft. NASA/CR-1999-209338, June 1999.
149. Wetzel, T. G. and Simpson, R. L., Effects of Fin and Jet Vortex Generators on the Crossflow. Journal of Aircraft, Vol. 35, No. 3, May-June 1998, pp. 370-379.
150. Gilyard, G. B. and Bolonkin, A., Optimal Pitch Thrust-Vector Angle and Benefits for all Flight Regimes. NASA/TM-2000-209021, March 2000.
151. Bowers, A. H. and Pahle, J. W., Thrust Vectoring on the NASA F-18 High Alpha Research Vehicle. NASA TM 4771, November 1996.
152. Pack, L. G. and Seifert, A., Periodic Excitation for Jet Vectoring and Enhanced Spreading. AIAA Paper 99-0672, January 1999.
153. Ericsson, L. E. and Beyers, M. E., Effect of Nose Slenderness on Forebody Flow Control. Journal of Aircraft, Vol. 36, No. 5, September-October 1999, pp. 885-889.
154. Malcolm, G. N. Forebody Vortex Control. AGARD Report No. 776, March 1991, pp. 61 -640.
155. Murri, D. G. and Rao, D. M., Exploratory Studies of Actuated Forebody Strakes for Yaw Control at High Angles of Attack. AIAA Paper 87-2557, August 1987.
156. Malcolm, G. N. and Skow, A. M., Enhanced Controllability Through Vortex Manipulation on Fighter Aircraft at High Angles of Attack. AIAA Paper 86-2277-CP, August 1986.
157. Peake, D. J., Owens, F. K., and Johnson, D. A., Control of Forebody Vortex Orientation to Alleviate Sideforces. AIAA Paper 80-0183, January 1980.
158. Moore, W. A., Skow, A. M., and Lorincz, D. J., Control of the Forebody Vortex Orientation by Asymmetric Air Injection. AIAA Paper 800173, January 1980.
159. Ng, T. T. and Malcolm, G. N., Aerodynamic Control using Forebody Blowing and Suction. AIAA Paper 91-0619, January 1991.
160. Rourke, M. J., Ralston, J. N., Kloc, S. J., and Langan, K. J., Development of a Con- formal Pneumatic Forebody Control for Next- Generation Fighters. AIAA Paper 96-0786, 1996.
161. Ross, A. J., Jefferies, E. B., and Edwards G. F., Control of Forebody Vortices by Suction at the Nose of the RAE High Incidence Research Model. AGARD CP-494, October 1990.
162. Ng, T. T. and Malcolm, G. N., Aerodynamic Control using Forebody Strakes. AIAA Paper 91-0618, January 1991.
163. Brandon, J. M., Simon, J. S., Owens, D. B., and Kiddy, J. S., Free-Flight Investigation of Forebody Blowing for Stability and Control. AIAA Paper 96-3444, July 1996.
164. Rourke, M. J. and Sedor, J. L. Forebody-Mounted Jet Nozzles for Yaw Control on a Generic Fighter Configuration with a Chined Forebody. AIAA Atmospheric Flight Mechanics Conference, August 7-10, 1995/Baltimore, MD, pp. 516-522.
165. Rourke, M. J., Experimental Investigation of Slot Blowing for Yaw Control on a Generic Fighter Configuration with a Chined Forebody. AIAA Paper 95-1798-CP, June 1995.
166. Roos, F. W. and Magness, C. L., Bluntness and Blowing for Flowfield Asymmetry Control on Slender Forebodies. AIAA Paper 93-3409, August 1993.
167. Roos, F. W., Microblowing for High-Angle-of- Attack Vortex Flow Control on a Fighter Aircraft. AIAA Paper 96-0543, January 1996.
168. Roos, F. W., Microblowing for Vortex Asymmetry Management on a Hemisphere-Cylinder Forebody. AIAA Paper 96-1951, June 1996.
169. Roos, F. W., Synthetic-Jet Microblowing for Vortex Asymmetry Management on a Hemisphere-Cylinder Forebody. AIAA Paper 97-1973, June 1997.
170. Roos, F. W., Synthetic-Jet Microblowing for Forebody Flow-Asymmetry Management. AIAA Paper 98-0212, January 1998.
171. Wu, J. M., Vakili, A., Chen, Z. L., Investigation on the Effects of Discrete Wingtip Jets. AIAA Paper 83-0546, January 1983.
172. Wu, J. M Vakili, A. D., Gilliam, F. T., Aerodynamic Interactions of Wingtip Flow with Discrete Wingtip Jets. AIAA Paper 84-2206, 1984.
173. Lee, C. S., Tavella, D., Wood, N. J., and Roberts, L, Flow Structure of Lateral Wing- Tip Blowing. AIAA Paper 86-1810, June 1986.
174. Lee, C. S., Tavella, D., Wood, N. J., and Roberts, L., Flow Structure and Scaling Laws in Lateral Wing-Tip Blowing. AIAA Journal, Vol. 27, No. 8, August 1989, pp. 1002-1007.
175. Savchenko, Y. N., Supercavitation - Application and Perspectives. High-Speed Hydrodynamics and Supercavitation, March 31, 2000/Grenoble, France 16 pgs.
176. Simoneau, R., Bourdon, P., Farhat, M., Avel-Lan, F., and Dorey, J. M., Cavitation Erosion, Impact Intensity, and Pit Size Distribution of Jet and Vortex Cavitation. ASME FED-Vol. 176, 1993, pp. 69-78.
177. Abbot, P. A., Arndt, R. E. A., and Shanahan, T. B., Modulation Noise Analyses of Cavitating Hydrofoils. Distribution of Jet and Vortex Cavitation. ASME FED-Vol. 176, 1993, pp. 83-94.
178. Farhat, M., Pereira, F., and Avellan, F., Cavitation Erosion Power as a Scaling Factor for Cavitation Erosion of Hydraulic Machines. Distribution of Jet and Vortex Cavitation. ASME FED-Vol. 176, 1993, pp. 95-104.
179. Kirschner, I., Roth, K. W., Hrubes, J. D., Dean, L. M., and Stinebring, D. R., Progress in Supercavitating High Speed Projectiles Research. FED-Vol. 236, 1996, pp. 445-456.
180. May, A., Water Entry and the Cavity-Running Behaviour of Missiles. Naval Sea Systems Command Hydroballistics Advisory Committee Technical Report 75-2, 1975.
181. Wu, T. Y., Swimming of a Waving Plate. Journal of Fluid Mechanics, Vol. 10, 1961, pp. 321344.
182. Wu, T. Y, Hydromechanics of Swimming Propulsion. Part 1. Swimming of a TwoDimensional Flexible Plate at Variable Forward Speeds in an Inviscid Fluid. Journal of Fluid Mechanics, Vol. 46, 1971, pp. 337-355.
183. Lighthill, J., Mathematical Biofluiddynamics, SIAM Vol. 17, 1975, 281 pgs.
184. Taneda, S. and Tomonari, Y, An Experiment on the Flow Around a Waving Plate. Journal of the Physical Society of Japan, Vol. 36, No. 6, June 1974, pp. 1683-1689.
185. Anderson, J. M, Vortex Control for Efficient Propulsion. PhD Thesis, Joint Program, Massachusetts Institute of Technology and Woods Hole Oceanographic Institution, 1996.
186. Anderson, J. M., Streitlien, K., Barrett, D. S., and Triantafyllou, M. S., Oscillating Foils of High Propulsive Efficiency. Journal of Fluid Mechanics, Vol. 360, 1998, pp. 41-72.
187. Triantafyllou, M. S. and Triantafyilou, G. S., An Efficient Swimming Machine. Scientific American, Vol. 272, No. 3, 1995, pp. 64-70.
188. Barrett, D.S., Triantafyllou, M. S., Yue, D. K. P., Grosenbaugh, M. A., and Wolfgang, M. J., Drag Reduction in Fish-like Locomotion. Journal of Fluid Mechanics, Vol. 392, 1999, pp. 183-212.
189. Taneda, S. Visual Observations of the Flow Past a Circular Cylinder Performing a Rotary Oscillation. Journal of the Physical Society of Japan, Vol. 45, No. 3, September 1978, pp. 1038-1043.
190. Tokumaru, P. T. and Dimotakis, P. E., Rotary Oscillation Control of a Cylinder Wake. Journal of Fluid Mechanics, Vol. 224, 1991, pp. 77-90.
191. Ffowcs-Williams, J. E., and Zhao, B. C., The Active Control of Vortex Shedding. Journal of Fluids and Structures, Vol. 3, 1989, pp. 115122.
192. Bushnell, D. M., Application Fronters of "Designer Fluid Mechanics" -Visions versus Reality or An attempt to Answer the Perennial Question "Why Isn't It Used?" AIAA Paper 97-2110, June 1997.