Two-phase friction pressure drop of small diameter U-type wavy pipes

8th AIAA/ASME Joint Thermophysics and Heat Transfer Conference

Volumn , Issue , 2002, Pages

  Chen, Ing Youn ^a   Lai, Yee Kang ^a   Yang, Bing Chwen ^b   Wang, Chi Chung ^b  

^a NATIONAL YUNLIN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Taiwan)

^b INDUSTRIAL TECHNOLOGY RESEARCH INSTITUTE   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

AIR; DROPS; FRICTION; HEAT TRANSFER; PRESSURE DROP; REYNOLDS NUMBER;

AIR-WATER MIXTURE; FRICTION FACTOR EQUATIONS; FRICTION FACTORS; FRICTION PRESSURE DROP; FRICTIONAL CHARACTERISTICS; FRICTIONAL PRESSURE DROPS; MARTINELLI PARAMETER; TOTAL MASS FLUX;

TWO PHASE FLOW;

EID: 85087594770     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2514/6.2002-3021     Document Type: Conference Paper

References (22)

1. Dean, W. R., "Note on the Motion of Fluid in a Curved Pipe," Phil' Mag. 4, 1927, pp.208-695.
2. Cheng, K. C., and Yuen, F. P., "Flow visualization studies on secondary flow patterns in straight tubes downstream of a 180 deg bend and in isothermally heated horizontal tubes," ASME J. of Heat Transfer, 109, 1987, pp. 49-61.
3. Manlapaz, R. L. and Churchill, S. W., 1980, "Fully Developed Laminar Flow in a Helical Coiled Tube of Finite Pitch," Chemical Engineering Communications, 7, 1980, pp. 57-58.
4. Ito, H, "Pressure Losses in Smooth Pipe Bends," ASME J. of Basic Engineering, 82(1), 1960, pp. 131-143.
5. Ungar, K., "Dimensional Analysis of Two-Phase Flow in Microgravity," Report to Crew and Thermal System Division Management, NASA Johnson Space Center, May 15, 1995.
6. Cho, K. and Tae, S. J., "Evaporation Heat Transfer for R-22 and R-407 Refrigerant-oil Mixture in a Microfin Tube with a U-bend," Int. J. of Refrigeration, 23, 2000, pp. 219-231.
7. Cho, K. and Tae, S. J., "Condensation Heat Transfer for R-22 and R-407 Refrigerant-oil Mixtures in a Microfin Tube with a U-bend," Int. J. of Heat Mass Transfer, 44, 2001, pp. 2043-2051.
8. Popiei, C. O. and Wojtkowiak, J., "Friction Factor in U-Type Undulated Pipe," J Fluids Engineering, 122, 2000, pp. 260-263.
9. Wojtkowiak, J. and Popiei, C. O., "Effect of Cooling on Pressure Losses in U-type Wavy Pipe Flow," Int. Comm. Heat Transfer, 27(2), 2000, pp. 169-177.
10. Awwad, A., Xin, R. C., Dong, Z. F., Ebadian, M. A. and Soliman, H. M., "Flow Patterns and Pressure Drop in Air/Water Two-Phase Flow in Horizontal Helicoidal pipes," J. of Fluid Engineering, 117, 1995, pp.720-726.
11. Awwad, A., Xin, R. C., Dong, Z. F., Ebadian, M. A. and Soliman, H. M., "Measurement and Correlation of the Pressure Drop in Air-Water Two-Phase Flow in Horizontal Helicoidal pipes," Int. J. Multiphase, 21(4), 1995, pp.607-619.
12. Geary, D. F., "Return Bend Pressure Drop in Refrigeration Systems," ASHREA Journal 81(1), 1975, pp. 250-265.
13. Traviss, D. P. and Rohsenow, W. M., "The Influence of Return Bends on the Downstream Pressure Drop and Condensation Heat Transfer in Tubes," ASHREA Semiannual Meeting, Chicago, II, Jan. 28-Feb. 1, No. 2269 RP-63, 1973, pp. 129-137.
14. Kim, J. S., Katsuya, N., Masafumi, K., Kouichrio, K. and Toshiaki H., "Influence of Oil on Refrigerant Evaporator Performance-4th Report: Flow Regime and Pressure Drop in Return Bend," Trans. of the JAR, 6(1), 1989, pp. 79-89.
15. Chen, I. Y., Yang, K. S., Chang, Y. J. and Wang, C. C., "Two-Phase Pressure Drop of Air-Water and R-410A in small Horizontal Tubes," Int. J. Multiphase Flow, 27, 2001, pp.1293-1299.
16. Moffat, R.J., "Describing the uncertainties in experimental results," Experimental Thermal and Fluid Science, 1, 1988, pp. 3-17.
17. Mishra, P., and Gupta, S. H., "Momentum Transfer in Curved Pipes. 1. Newtonian Fluids," Ind. Eng. Chem. Process Des. Dev., 18(1), 1979, pp. 130-137.
18. Taitel, Y. and Dukler, A. E., "A model for Predicting Flow regime Transitions in Horizontal and Near Horizontal Gas-Liquid Flow," AIChE J., 22(1), 1976, pp.47-55.
19. Chen, I. Y., Yang, Y. W. and Wang, C. C., "Influence of Horizontal Return Bend on the Two-phase Flow Pattern in 7-mm Diameter Tube", Canadian J. of Chemical Engineering (accepted), March 2002
20. Coleman, J. W. and Garimella, S., "Characterization of Two-Phase Flow Patterns in Small Diameter Round and Rectangular Tubes," Int. J. of Heat and Mass Transfer 42, 1999, pp.2869-2881.
21. Chisholm, D., "A theoretical basis for the Lockhart-Martinelli Correlation for Two-Phase Flow.," Int. J. Heat Mass Transfer 10, 1967, pp. 1767-1778.
22. Chen, I. Y., Yang, K. S., and Wang, C. C., "Two-Phase Frictional Pressure Drop Correlations for Small Tubes", J. of Thermophysics and Heat Transfer, 15(4), 2001,pp.409-415.