SYNTHESIS OF CUTTING TOOL PLACEMENT, ORIENTATION AND MOTION BASED ON SURFACE ANALYSIS

Proceedings of the ASME Design Engineering Technical Conference

Volumn 1, Issue , 2000, Pages 441-456

  Jensen, C G ^a   Hill, J K ^a   White, K A ^b  

^a Brigham Young University   (United States)

^b Contour Numerical Control ^*  (United States)

Author keywords

curvature matched machining; five axis machining; gouge detection; Numerical control; offsets; surface surface intersection

Indexed keywords

GRINDING (MACHINING); MACHINE TOOLS; SURFACE ANALYSIS;

% REDUCTIONS; CURVATURE MATCHED MACHINING; DESIGN SURFACES; FIVE-AXES MACHINING; GOUGE DETECTION; MATCHINGS; NUMERICAL CONTROL; OFFSET; SURFACE-SURFACE INTERSECTION; SURFACES INTERSECTIONS;

CUTTING TOOLS;

EID: 85086750055     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC2000/CIE-14632     Document Type: Conference Paper

References (37)

1. Anderson, D.C., and Jensen, CG, 1993, Analysis and Synthesis of Multi-Axis Sculptured Surface Machining, Purdue University Technical Report TR-ERC 93-1.
2. do Carmo, M.P., 1976, Differential geometry of curves and surfaces, Prentice-Hall, Englewood Cliffs, N.J.
3. Farin, G, 1988, Curves and surfaces for computer aided geometric design, Academic Press, Inc., Boston, MA.
4. Farouki, R.T., 1986, "The approximation of non-degenerate offset surfaces", Computer Aided Geometric Design, Vol. 3, pp. 15-43.
5. Faux, I.D. and Pratt, MJ., 1979, Computational geometry for design and manufacture, John Wiley & Sons, New York, NY.
6. Goetz, A., 1970, Introduction to differential geometry, Addison Wesley Pub. Co., Reading, MA.
7. Graustein, W.C. and Caspar, W., 1935, Differential geometry, Macmillan Co., New York, NY.
8. Jensen, C.G, 1993, Analysis and synthesis of multi-axis sculptured surface machining, Ph.D. Dissertation, Purdue University.
9. Jensen, C.G and Anderson, D.C., 1993, "Accurate tool placement & orientation for finish surface machining", Journal of Design and Manufacturing, Vol. 3, pp. 251-261.
10. Kitchen, P.M., 1996, Application of curvature matched machining to turbo machinery, M.S. Thesis, Brigham Young University.
11. Kreyszig, E., 1959, Differential Geometry, University of Toronto Press, Toronto.
12. Kuragano, T., Sasaki, N. and Suzuki, A., 1989, "The FRES-DAM/M system for generating tool paths for manufacturing aesthetically pleasing injection molded products", Proceedings of Computer applications in production and engineering: Third International IFIP Conference on Computer Applications in Production and Engineering, Elsevier Science, Tokyo, Japan, pp. 411-418.
13. Lee, Y.F., 1994, "Automatic planning for 5-axis sculptured surface machining", Computers in Engineering, ASME, Vol. 1.
14. Lee, Y.F., 1997, "Admissible tool orientation control of gouging avoidance for 5-axis complex surface machining", Computer-Aided Design, Vol. 29, No. 7.
15. Lee, Y.E, 1997, "Fillet endmill placement and error analysis for multi-axis CNC machining", Transactions of the NAMRII SME, Vol. 00, pp. 129-134.
16. Li, E, Wang, X.C., Ghosh, S.K., Kong, D.Z., Lai, T.Q. and Wu, X.T., 1995, "Gouge detection and tool position modification for five-axis NC machining of sculptured surfaces", Journal of Materials Processing Technology, Vol. 48, pp. 739-745.
17. Li, E, Wang, X.C., Ghosh, S.K., Kong, D.Z., Lai, T.Q. and Wu, X.T., 1995, "Tool-path generation for machining sculptured surfaces", Journal of Materials Processing Technology, Vol. 48, pp. 811-816.
18. Narvekar, A.P., Oliver, J.H., 1990, "Intersection of vectors with general five-axis NC swept volumes", Proceedings of Manufacturing Int'I., ASME, pp. 99-104.
19. Nishita, T., Sederberg, T.W., Kakimoto, M., 1990, "Ray tracing trimmed rational surface patches", Computer Graphics, Vol. 24, No. 4.
20. Oliver, J.H. and Goodman, E.D., 1986, "Graphical verification on NC milling programs for sculptured surface parts", Proceedings of Integrated and Intelligent Manufacturing, ASME, Anaheim, CA, PED 21, pp. 247-263.
21. Petrizze, D.N., 1997, An analytical study of interference algorithms applied to curvature matched machining, M.S. Thesis, Brigham Young University.
22. Pi, J., 1996, Automatic tool selection and tool path generation for five-axis surface machining, Ph.D. Dissertation, Brigham Young University.
23. Pi, J., Red, E. and Jensen, G, 1998, "Grind-free tool path generation for five-axis surface machining", Computer Integrated Manufacturing Systems, Vol. 11, No. 4, pp. 337-350.
24. Saito, T. and Takahashi, T., 1991, "NC machining with G-buffer method", Computer Graphics, 25 (4), 207-216.
25. Sambandan, K. and Wang, K.K., 1989, "Five-axis swept volumes for graphic NC simulation and verification", Proceedings of Advances in Design Automation-1989, ASME, Montreal, Quebec, Canada, DE 19-1, pp. 143-150.
26. Sederberg, T.W., 1983, Implicit and parametric curves and surfaces for computer aided geometric design, Ph.D. Dissertation, Purdue University.
27. Sederberg, T.W. and Zundel, A.K., 1989, "Scan line display of algebraic surfaces", Computer Graphics, Vol. 23, No. 3, pp. 147-156.
28. Simpson, S.T., 1995, Numerical implementation and experimental verification of curvature matched machining theory, M.S. Thesis, Brigham Young University.
29. Simpson, T.S., Jensen, CG and Mulkay, E.L., 1995, "A practical implementation of curvature matched machining for complex geometric objects", Concurrent Product and Process Engineering, ASME, MED-Vol. 1/DE-Vol. 85.
30. Vickers, GW. et. al., 1985, "The definition and manufacture of compound curvature surfaces using G-surf', Computer in Industry, Vol. 6, pp. 173-183.
31. Wang, X.C., Ghosh, S.K., Li, Y.B. and Wu, X.T., 1993, "Curvature catering - A new approach in manufacture of sculptured surfaces (Part 1. theorem)", Journal of Materials Processing Technology, Vol. 38, pp. 159-176.
32. Wang, X.C., Ghosh, S.K., Li, Y.B. and Wu, X.T., 1993, "Curvature catering - A new approach in manufacture of sculptured surfaces (Part 2. methodology)", Journal of Materials Processing Technology, Vol. 38, pp. 177-194.
33. Wang, WP. and Wang, K.K., 1986, "Real-time verification of multi-axis NC programs with raster graphics", Proceedings of IEEE International Conference on Robotics and Automation, IEEE, San Francisco, CA, 166-171.
34. White, K., 1997, Development and implementation of three differential geometry-based five-axis machining algorithm, M.S. Thesis, Brigham Young University.
35. Willmore, T., 1959, An introduction to differential geometry, Clarendon Press, Oxford.
36. Zhu, C, 1990, "Avoiding Interference in Manufacturing a Free-Formed Surface with a Cylindrical End Milling Cutter", Computers in Industry, Vol. 14, pp. 367-371.
37. Zhu, C, 1991, "Tool-Path Generation in Manufacturing Sculptured Surfaces with a Cylindrical End-Milling Cutter", Computers in Industry, Vol. 17, pp. 385-389.