Mean stress effects in stress-life and strain-life fatigue

SAE Technical Papers

Volumn , Issue , 2004, Pages

  Dowling, Norman E ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

TENSILE STRENGTH;

FATIGUE STRENGTH; MEAN STRESS; MEAN STRESS EFFECTS; MODIFIED GOODMAN EQUATION; STRAIN BASED; STRAIN LIFE CURVE; STRAIN LIVES; ULTIMATE TENSILE STRENGTH;

FRACTURE TOUGHNESS;

EID: 85072507033     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2004-01-2227     Document Type: Conference Paper

References (23)

1. Mann, J. Y., "The Historical Development of Research on the Fatigue of Materials and Structures," The Journal of the Australian Institute of Metals, Nov. 1958, pp. 222-241.
2. Goodman, J., Mechanics Applied to Engineering, Longmans, Green and Co., London, 1919, pp. 631-636.
3. Smith, J. O., "The Effect of Range of Stress on the Fatigue Strength of Metals," Bulletin No. 334, University of Illinois, Engineering Experiment Station, Urbana, IL, Feb. 1942. See also Bulletin No. 316, Sept. 1939.
4. Smith, K. N., Watson P., and Topper T. H., "A Stress-Strain Function for the Fatigue of Metals," Journal of Materials, ASTM, Vol. 5, No. 4, Dec. 1970, pp. 767-778.
5. Landgraf, R. W., "Effect of Mean Stress on the Fatigue Behavior of a Hard Steel," Report No. 662, Dept. of Theoretical and Applied Mechanics, University of Illinois, Urbana, IL, Jan. 1966.
6. Dowling, N. E., "Fatigue Life and Inelastic Strain Response under Complex Histories for an Alloy Steel," Journal of Testing and Evaluation, ASTM, Vol. 1, No. 4, July 1973, pp. 271-287.
7. Lazan, B. J., and Blatherwick A. A., "Fatigue Properties of Aluminum Alloys at Various Direct Stress Ratios: Part 1, Rolled Alloys," WADC TR 52-307, Part 1, Wright Air Development Center, Wright-Patterson AFB, OH, Dec. 1952.
8. Grover, H. J., Bishop S. M., and Jackson L. R., "Fatigue Strengths of Aircraft Materials: Axial Load Fatigue Tests on Unnotched Sheet Specimens of 24S-T3 and 75S-T6 Aluminum Alloys and of SAE 4130 Steel," NACA TN 2324, National Advisory Committee for Aeronautics, Washington, DC, March 1951.
9. Illg, W., "Fatigue Tests on Notched and Unnotched Sheet Specimens of 2024-T3 and 7075-T6 Aluminum Alloys and of SAE 4130 Steel with Special Consideration of the Life Range from 2 to 10,000 Cycles," NACA TN 3866, National Advisory Committee for Aeronautics, Washington, DC, Dec. 1956.
10. Topper, T. H., and Sandor B. I., "Effects of Mean Stress and Prestrain on Fatigue Damage Summation," Effects of Environment and Complex Load History on Fatigue Life, ASTM STP 462, Am. Soc. for Testing and Materials, West Conshohocken, PA, 1970, pp. 93-104.
11. Endo, T., and Morrow J., "Cyclic Stress-Strain and Fatigue Behavior of Representative Aircraft Metals," Journal of Materials, ASTM, Vol. 4, No. 1, March 1969, pp. 159-175.
12. Gallagher, J. P., et al., "Improved High Cycle Fatigue (HCF) Life Predictions," AFRL-ML-WP-TR-2001-4159, Air Force Research Laboratory, Wright-Patterson Air Force Base, OH, Jan. 2001.
13. Knipling, K., "High-Cycle Fatigue/Low-Cycle Fatigue Interactions in Ti-6Al-4V," MS Thesis, Materials Science and Engineering Department, Virginia Tech, Blacksburg, VA, Jan. 2003.
14. Conle, F. A., Landgraf R. W., and Richards F. D., Materials Data Book: Monotonic and Cyclic Properties of Engineering Materials, Ford Motor Co., Scientific Research Staff, Dearborn, MI, 1984.
15. SAE, "Technical Report on Low Cycle Fatigue Properties of Wrought Materials," SAE J1099, Information Report, Society of Automotive Engineers, Warrendale, PA, 1989. See also, Tucker L. E., Landgraf R. W., and Brose W. R., "Proposed Technical Report on Fatigue Properties for the SAE Handbook," SAE Paper No. 740279, Automotive Engineering Congress Detroit, MI, 1974.
16. Bridgman, P. W., "The Stress Distribution at the Neck of a Tension Specimen," Trans. of ASM International, Vol. 32, 1944, pp. 553-574.
17. Dowling, N. E., and Khosrovaneh A. K., "Simplified Analysis of Helicopter Fatigue Loading Spectra," Potter J. M., and Watanabe R. T., eds., Development of Fatigue Loading Spectra, ASTM STP 1006, Am. Soc. for Testing and Materials, West Conshohocken, PA, 1989, pp. 150-171.
18. Dowling, N. E., Mechanical Behavior of Materials: Engineering Methods for Deformation, Fracture, and Fatigue, 2nd ed., Prentice Hall, Upper Saddle River, NJ, 1999, p. 655.
19. Morrow, J., "Fatigue Properties of Metals," Section 3.2 of Fatigue Design Handbook, Pub. No. AE-4, Society of Automotive Engineers, Warrendale, PA, 1968. Section 3.2 is a summary of a paper presented at a meeting of Division 4 of the SAE Iron and Steel Technical Committee, Nov. 4, 1964.
20. Walker, K., "The Effect of Stress Ratio During Crack Propagation and Fatigue for 2024-T3 and 7075-T6 Aluminum," Effects of Environment and Complex Load History on Fatigue Life, ASTM STP 462, Am. Soc. for Testing and Materials, West Conshohocken, PA, 1970, pp. 1-14.
21. Landgraf, R. W., "The Resistance of Metals to Cyclic Deformation," Achievement of High Fatigue Resistance in Metals and Alloys, ASTM STP 467, Am. Soc. for Testing and Materials, West Conshohocken, PA, 1970, pp. 3-36.
22. Dowling, N. E., and Thangjitham S., "An Overview and Discussion of Basic Methodology for Fatigue," Fatigue and Fracture Mechanics: 31st Volume, ASTM STP 1389, Halford G. R., and Gallagher J. P., eds., Am. Soc. for Testing and Materials, West Conshohocken, PA, 2000, pp. 3-36.
23. Dowling, N. E., "Local Strain Approach to Fatigue," Chapter 4.03, Volume 4, Cyclic Loading and Fatigue, Ritchie R. O., and Murakami Y., volume editors; part of the 10-volume set, Comprehensive Structural Integrity, Karihaloo B., Ritchie R. O., and Milne I., overall editors, Elsevier Science Ltd., Oxford, England, 2003